Using Acoustic Emission to monitor fatigue damage and healing in Asphalt Concrete

Bonnaure, F., Huibers, A., and Bonders, A. (1983). “Etude en laboratoire de l’influence des temps de repos sur les caractereristiques de fatigue des enrobes bitumineux.” Rev. Ren. Routes Aerodrom., Vol. 595, pp. 74–82 (In French).

Castro, M. and Sanchez, J.A. (2006). “Fatigue and healing of asphalt mixtures: Discriminate analysis of fatigue curves.” J. of Trans. Eng., ASCE, Vol. 132, No. 2, pp. 168–174.

Chang, W.V. (1994). “Application of acoustic emission to study the cohesive and adhesive of asphalt.” Final Report to Strategic Highway Research Program, SHRP-A-682, pp. 162–184.

Chehab, G.R., O’Quinn E., and Kim, Y.R. (2000). “Specimen geometry study for direct tension test based on mechanical tests and air void variation in asphalt concrete specimens compacted by superpave gyratory compactor.” Transportation Research Record 1723, TRB, National Research Council, Washington, D.C., Vol. 1723, pp. 125–132.

Chehab, G.R., Seo, Y., and Kim, Y.R. (2006). “Viscoelastoplastic damage characterization of asphalt-aggregate mixtures using digital image correlation.” Int. J. of Geomechanics, ASCE, Vol. 7, No. 2, pp. 111–118.

Colombo, I.S., Main, I.G., and Forde, M.C. (2003). “Assessing damage of reinforced concrete beam using analysis of acoustic emission signals.” Journal of Materials in Civil Engineering, ASCE, Vol. 15, No. 3, June 1, pp. 280–286.

Daniel, J.S. (2001). Development of a Simplified Fatigue Test and Analysis Procedure Using a Viscoelastic, Continuum Damage Model and its Implementation to WesTrack Mixtures, PhD dissertation, North Carolina State University, Raleigh, NC.

Francken, L. and Clauwaert, C. (1987). “Characterization and structural assessment of bound materials for flexible road structures.” Proc. 6 th Int. Conf. on Structural Design of Asphalt Pavements, Univ. of Michigan, Ann Arbor, Michigan, pp. 130–144.

Hsu, T. and Tseng, K. (1996). “Effect of rest periods on fatigue response of asphalt concrete mixtures,” J. Transportation Engineering, Vol. 122, No. 4, pp. 316–322.

Kaiser, J. (1950) Untershchung uber das Auftreten von Gerauschen beim Zugversuch, Dr.-Ing dissertation, Fakultat fur Maschinenwesen und Elektrotechnik der Technischen Universitat Munchen (TUM).

Kim, Y.R. and Little, D.N. (1990). “One-dimensional constitutive modeling of asphalt concrete.” J. of Eng. Mech., ASCE, Vol. 116, No. 4, pp. 751–772.

Kim, Y.R. and Little, D.N. (1991). “SEM analysis on fracture and healing of sand-asphalt mixtures.” J. of Mat’l. Civ. Eng., ASCE, Vol. 3, No. 2, pp. 140–153.

Miller, R. K. (1987). Nondestructive Testing Handbook, ASNT.

Sachese, Roget, and Yamaguchi, (1991). “Acoustic Emission — current practice and future directions.” STP1077, ASTM.

Schechinger, B. and Vogel, T. (2004). “Acoustic emission for monitoring damage accumulation in reinforced concrete structures,” 26th European Conference on Acoustic Emission Testing, pp. 107–114.

Seo, Y., Kim, Y.R., Schapery, R.A., Witczak, M.W., and Bonaquist, R. (2004). “A study of crack-tip deformation and crack growth in asphalt concrete using fracture mechanics.” J. of Association of Asphalt Paving Technologist, Vol. 73, pp. 697–730.

Tensi, Hans M (2004). “The KAISER-EFFECT and its scientific background.” The 26 th European Conference on Acoustic Emission Testing, Berlin, DGZfP-Proceedings BB 90-CD, pp. 31–42.

Vahaviolos, S. J. (1999). Acoustic emission-standards and technology update, STP 1353, ASTM.

Verstraeten, J. (1991). “Fatigue of bituminous mixes and bitumen thixotropy,” Proc. XIX th World Road Congress, AIPCR, Marrakech, Maroc, pp. 766–769.