Use of recycled plastic in concrete: A review

Alter, 1993, The origins of municipal solid waste: II. Policy options for plastics waste management, Waste Management Research, 11, 319, 10.1177/0734242X9301100406

Al-Manaseer, 1997, Concrete containing plastic aggregates, Concrete International, 19, 47

Ambrose, 2002, Diversion from landfills: quality products from valuable plastics, Resources, Conservation and Recycling, 36, 309, 10.1016/S0921-3449(02)00030-7

Anzano, 2006, Rapid characterization of plastics using laser-induced plasma spectroscopy (LIPS), Polymer Testing, 25, 623, 10.1016/j.polymertesting.2006.04.005

Association of Plastics Manufactures in Europe (APME), 2004. Plastic recovery in perspective: plastics consumption and recovery in Western Europe. <www.plasticeurope.org>.

Avila, 2003, A mechanical analysis on recycled PET/HDPE composites, Polymer Degradation and Stability, 80, 373, 10.1016/S0141-3910(03)00025-9

Balaguru, 1992

Barlaz, 1993, Framework for assessment of recycle potential applied to plastics, Journal of Environmental Engineering, ASCE, 119, 798, 10.1061/(ASCE)0733-9372(1993)119:5(798)

Barlow, J.W., Paul, D.R., 1987. The compatibility of mixed plastic scrap. Reclamation of Plastic Waste Research Report-Phase I. Plastic Institute of America, pp. 137–148.

Batayneh, 2007, Use of selected waste materials in concrete mixes, Waste Management, 27, 1870, 10.1016/j.wasman.2006.07.026

Bayasi, 1993, Properties of polypropylene fiber reinforced concrete, ACI Materials Journal, 90, 605

Boettcher, F.P., 1992. Environmental compatibility of polymers-emerging technologies in plastics recycling. ACS Symposium Series 513, American Chemical Society, pp. 16–25.

Burillo, 2002, Polymer recycling: potential application of radiation technology, Radiation Physics and Chemistry, 64, 41, 10.1016/S0969-806X(01)00443-1

Byung-Wan, 2006, Mechanical properties of polyester polymer concrete using recycled polyethylene terephthalate, ACI Structural Journal, 103, 219

Cavalieri, 2002, Development of composite materials by mechanochemical treatment of post-consumer plastic waste, Waste Management, 22, 913, 10.1016/S0956-053X(02)00084-3

Choi, 2005, Effects of waste PET bottles aggregate on the properties of concrete, Cement and Concrete Research, 35, 776, 10.1016/j.cemconres.2004.05.014

Composite Institute, 1987. Polymer concrete test methods. The Society of Plastics Industry.

Curlee, 1986

Dodbiba, G., Takahashi, K., Sadaki, J., Fujita, T., in press. The recycling of plastic wastes from discarded TV sets: comparing energy recovery with mechanical recycling in the context of life cycle assessment. Journal of Cleaner Production.

Ehrig, 1992

Eldin, 1992, Use of scrap tires in road construction, Construction Engineering Management, ASCE, 118, 561, 10.1061/(ASCE)0733-9364(1992)118:3(561)

EPA, 1991. Plastic wastes: management, control, recycling and disposal. Pollution Technology Review No. 201, Noyes Data Corporation, Park Ridge, NJ.

EPA, 2003. Report on Plastics, USA.

Ernst, 2000, Quantification of heavy metals for the recycling of waste plastic from electrotechnical applications, Talanta, 53, 347, 10.1016/S0039-9140(00)00491-4

Eswaraiah, C., Kavitha, T., Vidyasagar, S., Narayan, S.S., in press Classification of metals and plastics from printed circuit boards (PCB) using air classifier. Chemical Engineering and Processing.

Franklin Associates Ltd., 1998. Characterization of municipal solid waste. Update (Prepared for the USEPA) Prairie Village, KS, USA.

Gente, 2004, Cryo-comminution of plastic waste, Waste Management, 24, 663, 10.1016/j.wasman.2004.03.005

Goumans, 1991, Waste materials in construction, vol. 48

Hall, 2007, Analysis of products from the pyrolysis of plastics recovered from the commercial scale recycling of waste electrical and electronic equipment, Journal of Analytical and Applied Pyrolysis, 79, 375, 10.1016/j.jaap.2006.10.006

Hayashi, 1996, Thermal properties and temperature dependence of mechanical properties of resin concretes for structural use, Structural Materials, 45, 1014

Kang, 2005, Electronic waste recycling: a review of US infrastructure and technology options, Resources, Conservation and Recycling, 45, 368, 10.1016/j.resconrec.2005.06.001

Mantia, 2002, Improvement of the mechanical properties of photo-oxidized films after recycling, Polymer Degradation and Stability, 75, 1, 10.1016/S0141-3910(01)00199-9

Martin-Alfonso, 2007, Development of new lubricating grease formulations using recycled LDPE as rheology modifier additive, European Polymer Journal, 43, 139, 10.1016/j.eurpolymj.2006.09.020

Marzouk, 2007, Valorization of post-consumer waste plastic in cementitious concrete composites, Waste Management, 27, 310, 10.1016/j.wasman.2006.03.012

Masuda, 2001, Chemical recycling of mixture of waste plastics using a new reactor system with stirred heat medium particles in steam atmosphere, Chemical Engineering Journal, 82, 173, 10.1016/S1385-8947(00)00347-8

McQuillen, 1998, Economic analysis of rubber modified asphalt mixes, Journal of Transportation Engineering, ASCE, 114, 259, 10.1061/(ASCE)0733-947X(1988)114:3(259)

Mehta, 1993

Miskolczi, 2004, Thermal degradation of municipal plastic waste for production of fuel-like hydrocarbons, Polymer Degradation and Stability, 86, 357, 10.1016/j.polymdegradstab.2004.04.025

Office of Solid Waste and Office of Water, 1990. Methods to manage and control plastic wastes. Report to Congress (EPA/530-XW-89-051.

Okada, K., Koyanagi, W., Yonezawa, T., 1975. Thermo dependent properties of polyester resin concrete. In: Proceedings of the 5th International Congress on Polymer Concrete, Lancaster, UK, pp. 210–215.

Poulakis, 1997, Recycling of polypropylene by the dissolution/reprecipitation technique: I. A model study, Resources, Conservation and Recycling, 20, 31, 10.1016/S0921-3449(97)01196-8

Paula, 2005, Characterization of aluminized polyethylene blends via mechanical recycling, Material Science and Engineering, 403, 37, 10.1016/j.msea.2005.05.060

Rebeiz, 1995, Time-temperature properties of polymer concrete using recycled PET, Cement and Concrete Composites, 17, 119, 10.1016/0958-9465(94)00004-I

Rebeiz, 1995, Plastic waste management in construction: technological and institutional issues, Resources, Conservation and Recycling, 15, 245, 10.1016/0921-3449(95)00034-8

Rebeiz, 1991, Formulating and evaluating unsaturated polyester composite made with recycled PET, Journal of Material Education, 13, 441

Recycling and Resource Recovery Council, 1994. Uses of plastics and recycled plastics, Australia.

Remias, 2000, Oxidative chemical recycling of polyethene, Comptes Rendus de l’Académie des Sciences – Series IIC – Chemistry, 3, 627, 10.1016/S1387-1609(00)01144-0

Shen, 2002, Selective flotation separation of plastics by chemical conditioning with methyl cellulose, Resources Conservation and Recycling, 35, 229, 10.1016/S0921-3449(02)00003-4

Siddique, 2004, Properties of concrete containing scrap tire rubber – an overview, Journal of Waste Management, 24, 563, 10.1016/j.wasman.2004.01.006

Soroushian, 2003, Assessment of reinforcing effects of recycled plastic and paper in concrete, ACI Materials Journal, 100, 203

Subramanian, 2000, Plastics recycling and waste management in the US, Resource, Conservation and Recycling, 28, 253, 10.1016/S0921-3449(99)00049-X

Stein, R.S., 1992. Miscibility in polymer recycling-emerging technologies in plastics recycling, ACS Symposium Series 513, American Chemical Society, pp. 39–48.

<www.wasteonline.org.uk/resources/information/sheets/plastics/htm>, 2001. Plastic recycling information sheet, UK.

Yakowitz, 1990, Incineration of municipal solid waste: scientific and technical evaluation of the state-of-the art by an expert panel, Resources, Conservation and Recycling, 4, 241, 10.1016/0921-3449(90)90005-O

Yarahmadi, 2001, Effects of repeated extrusion on the properties and durability of rigid PVC scrap, Polymer Degradation and Stability, 73, 93, 10.1016/S0141-3910(01)00073-8

Yarahmadi, 2003, PVC floorings as post-consumer products for mechanical recycling and energy recovery, Polymer Degradation and Stability, 79, 439, 10.1016/S0141-3910(02)00360-9

Zhang, 1999, Intelligent liberation and classification of electronic scrap, Powder Technology, 105, 295, 10.1016/S0032-5910(99)00151-5

Zoorob, 2000, Laboratory design and investigation of the properties of continuously graded asphaltic concrete containing recycled plastics aggregate replacement (Plastiphalt), Cement & Concrete Composites, 22, 233, 10.1016/S0958-9465(00)00026-3