Unraveling the role of sintering temperature on physical, structural and tribological characteristics of ball milled Co28Cr6Mo biomaterial based alloy

Balagna, 2012, Characterization of Co–Cr–Mo alloys after a thermal treatment for high wear resistance, Mater. Sci. Eng. C., 32, 1868, 10.1016/j.msec.2012.05.003

Bouras, 2023, High photocatalytic capacity of porous ceramic-based powder doped with MgO, J. Korean Ceram. Soc., 60, 155, 10.1007/s43207-022-00254-5

Cheng, 2022, Shanhong wan microstructure evolution and wear mechanism of in situ prepared Ti–TiN cermet layers at high temperature, Compos. Part B: Eng., 242, 10.1016/j.compositesb.2022.110028

Corona-Gomez, 2021, Wear and corrosion characteristics of nano-crystalline tantalum nitride coatings deposited on CoCrMo alloy for hip joint applications, Mater. Charact., 182, 10.1016/j.matchar.2021.111516

Cuao-Moreu, 2019, Tribological behavior of borided surface on cocrmo cast alloy, Wear, 426–427, 204, 10.1016/j.wear.2019.02.006

Eka Perkasa, 2019, Influence of mangan on structure and corrosion properties of cobalt chrome molybdenum (Co-Cr-Mo), IOP Conf. Ser.: Mater. Sci. Eng., 694, 10.1088/1757-899X/694/1/012031

Fellah, 2014, Tribological behavior of Ti-6Al-4V and Ti-6Al-7Nb alloys for total hip prosthesis, Adv. Tribol., 2014, 10.1155/2014/451387

Fellah, 2023, Structural, Mechanical and Tribological Performance of a nano structured Biomaterial Co-Cr-Mo Alloy Synthesized Via Mechanical Alloying, J. Mater. Res. Technol., 25, 2152, 10.1016/j.jmrt.2023.06.031

Fellah, 2019, Preliminary investigation on the bio-tribocorrosion behaviour of porous nanostructured β-type titanium based biomedical alloy, Mater. Lett., 257, 10.1016/j.matlet.2019.126755

Fellah, 2023, Investigating the effect of milling time on structural, mechanical and tribological properties of a nanostructured hiped alpha alumina for biomaterial applications, Arab. J. Chem., 16, 10.1016/j.arabjc.2023.105112

Fellah, 2019, Effect of sintering temperature on structure and tribological properties of nanostructured Ti–15Mo alloy for biomedical applications, Trans. Nonferrous Met. Soc. China, 29, 2310, 10.1016/S1003-6326(19)65137-X

Fellah, 2020, Structural, tribological and antibacterial properties of (α + β) based Ti-alloys for biomedical applications, J. Mater. Res. Technol., 9, 14061, 10.1016/j.jmrt.2020.09.118

Gong, 2018, Corrosion behaviour of CoCrMo alloy fabricated by electron beam melting, Corros. Sci., 139, 68, 10.1016/j.corsci.2018.04.033

Hammadi, 2021, The effect of milling time on the microstructure and mechanical properties of Ti-6Al-4Fe alloys, Mater. Today Commun., 27

Hezil, 2019, Synthesis, structural and mechanical properties of nanobioceramic (α-Al2O3), J. Aust. Ceram. Soc., 55, 1167, 10.1007/s41779-019-00333-7

Igual Muñoz, 2019, Influence of electrochemical conditions on cocrmo behavior in simulated body fluid by step polarization technique, Ecs Trans., 28, 25, 10.1149/1.3496420

Kumagai, 2006, Dry friction and wear behavior of forged Co-29Cr-6Mo alloy without Ni and C additions for implant applications, Nippon Kinzoku Gakkaishi/J. Jpn. Inst. Met., 70, 265, 10.2320/jinstmet.70.265

Lashgari, 2011, Isothermal aging effect on the microstructure and dry sliding wear behavior of Co–28Cr–5Mo–0.3C alloy, J. Mater. Sci., 46, 7262, 10.1007/s10853-011-5686-2

Liu, 2017, The effect of simulated inflammatory conditions and pH on fretting corrosion of cocrmo alloy surfaces, Wear, 390, 302, 10.1016/j.wear.2017.08.011

Lizárraga, 2017, First principles theory of the Hcp-Fcc phase transition in cobalt, Sci. Rep., 7, 6, 10.1038/s41598-017-03877-5

Namus, 2020, Effect of grain size and crystallographic structure on the corrosion and tribocorrosion behaviour of a CoCrMo biomedical grade alloy in simulated body fluid, Wear, 478–479

Ren, 2016, Fabrication, tribological and corrosion behaviors of ultra-fine grained Co-28Cr-6Mo alloy for biomedical applications, J. Mech. Behav. Biomed. Mater., 60, 139, 10.1016/j.jmbbm.2015.12.039

Roudnicka, 2021, Different response of cast and 3d‐printed Co‐Cr‐Mo alloy to heat treatment: a thorough microstructure characterization, Metals, 11, 687, 10.3390/met11050687

Saldívar-García, 2005, Microstructural effects on the wear resistance of wrought and As-Cast Co-Cr-Mo-C implant alloys, J. Biomed. Mater. Res. Part A, 74, 269, 10.1002/jbm.a.30392

Shekhawat, 2021, A short review on polymer, metal and ceramic based implant materials, IOP Conf. Ser.: Mater. Sci. Eng., 1017, 10.1088/1757-899X/1017/1/012038

Shukla, 2021, Correlation between the microstructure and corrosion performance of the hipimsnitrided bio-grade cocrmo alloy, J. Alloy. Compd., 879, 10.1016/j.jallcom.2021.160429

Sinnett-Jones, 2005, Micro-abrasion-corrosion of a cocrmo alloy in simulated artificial hip joint environments, Wear, 259, 898, 10.1016/j.wear.2005.02.045

Stojanović, 2019, Tribocorrosion of a CoCrMo alloy sliding against articular cartilage and the impact of metal ion release on chondrocytes, Acta Biomater., 94, 597, 10.1016/j.actbio.2019.06.015

Taghian Dehaghani, 2015, Effect of sintering temperature and time on the mechanical properties of Co–Cr–Mo/58s bioglass porous nano-composite, Bull. Mater. Sci., 38, 1239, 10.1007/s12034-015-1005-x

Thornley, 2020, Investigation of the repassivation process of CoCrMo in simulated biological fluids, Corrosion, 76, 539, 10.5006/3423

Toh, 2017, Tribochemical characterization and tribocorrosive behavior of CoCrMo alloys: a review, Materials, 11, 30, 10.3390/ma11010030

Wei, 2018, Fatigue improvement of electron beam melting-fabricated biomedical Co–Cr–Mo alloy by accessible heat treatment, Mater. Res. Lett., 6, 93, 10.1080/21663831.2017.1396506

Yamanaka, 2014, Effects of nitrogen addition on microstructure and mechanical behavior of biomedical Co-Cr-Mo alloys, J. Mech. Behav. Biomed. Mater., 29, 417, 10.1016/j.jmbbm.2013.10.006

Yildirim, 2019, Effect of aging time on phase transformation, microstructure and hardness of Co-Cr-Mo alloys, Selcuk. Univ. J. Eng. Sci. Technol., 9364, 146

Yoda, 2012, Effects of chromium and nitrogen content on the microstructures and mechanical properties of As-Cast Co-Cr-Mo alloys for dental applications, Acta Biomater., 8, 2856, 10.1016/j.actbio.2012.03.024

Zambrano, 2019, The sliding wear behaviour of steels with the same hardness, Wear, 418–419, 201, 10.1016/j.wear.2018.12.002

Zangeneh, 2018, Microstructure and tribological characteristics of aged Co–28Cr–5Mo–0.3C alloy, Mater. Des., 37, 292, 10.1016/j.matdes.2011.12.041