Unleashing the potential of 3D printing soft materials

Li, 2023, Recent progress of conductive hydrogel fibers for flexible electronics: fabrications, applications, and perspectives, Adv. Funct. Mater., 33 Ying, 2021, Skin-like hydrogel devices for wearable sensing, soft robotics and beyond, iScience, 24, 10.1016/j.isci.2021.103174 Li, 2023, Self-powered hydrogel sensors, Device, 1, 10.1016/j.device.2023.100007 Xing, 2023, Metallic gels for conductive 3D and 4D printing, Matter, 6, 2248, 10.1016/j.matt.2023.06.015 Tolabi, 2023, Progress of Microfluidic Hydrogel-Based Scaffolds and Organ-on-Chips for the Cartilage Tissue Engineering, Adv. Mater., 35, 10.1002/adma.202208852 Touri, 2019, Additive manufacture of biomaterials-the evolution of rapid prototyping, Adv. Eng. Mater., 21, 10.1002/adem.201800511 Zhou, 2020, A review of 3D printing technologies for soft polymer materials, Adv. Funct. Mater., 30, 10.1002/adfm.202000187 Ge, 2021, 3D printing of hydrogels for stretchable ionotronic devices, Adv. Funct. Mater., 31, 10.1002/adfm.202107437 Abdolmaleki, 2021, Droplet-Based Techniques for Printing of Functional Inks for Flexible Physical Sensors, Adv. Mater., 33, 10.1002/adma.202006792 Yang, 2020, Inkjet and extrusion printing for electrochemical energy storage: a minireview, Adv. Mater. Technol., 5, 10.1002/admt.202000217 Becker, 2021, Broadband acoustic invisibility and illusions, Sci. Adv., 7, 10.1126/sciadv.abi9627 Zhu, 2021, 3D-printed multifunctional materials enabled by artificial-intelligence-assisted fabrication technologies, Nat. Rev. Mater., 19, 27 Kajtez, 2020, 3D-Printed soft lithography for complex compartmentalized microfluidic neural devices, Adv. Sci., 7 Hubbard, 2021, Fully 3D-printed soft robots with integrated fluidic circuitry, Sci. Adv., 7, eabe5257, 10.1126/sciadv.abe5257 Chen, 2022, 3D-Printed Anisotropic Polymer Materials for Functional Applications, Adv. Mater., 34 Zhou, 2023, 3D printable high-performance conducting polymer hydrogel for all-hydrogel bioelectronic interfaces, Nat. Mater., 22, 895, 10.1038/s41563-023-01569-2 Gong, 2020, Complexation-induced resolution enhancement of 3D-printed hydrogel constructs, Nat. Commun., 11, 1267, 10.1038/s41467-020-14997-4 Dabbagh, 2022, 3D-printed microrobots from design to translation, Nat. Commun., 13, 5875, 10.1038/s41467-022-33409-3 Tejedor, 2021 Zhang, 2021, 3D extrusion bioprinting, Nat. Rev. Methods Primers, 1, 75, 10.1038/s43586-021-00073-8 Chen, 2023, Recent Advances in 4D Printing of Liquid Crystal Elastomers, Adv. Mater., 35 Saadi, 2022, Direct ink writing: a 3D printing technology for diverse materials, Adv. Mater., 34, 10.1002/adma.202108855 Gonzalez, 2022, Current and emerging trends in polymeric 3D printed microfluidic devices, Addit. Manuf., 55 Vyatskikh, 2018, Additive manufacturing of 3D nano-architected metals, Nat. Commun., 9, 593, 10.1038/s41467-018-03071-9 Hardin, 2015, Microfluidic printheads for multimaterial 3D printing of viscoelastic inks, Adv. Mater., 27, 3279, 10.1002/adma.201500222 Franchin, 2017, Direct ink writing of geopolymeric inks, J. Eur. Ceram., 37, 2481, 10.1016/j.jeurceramsoc.2017.01.030 Li, 2019, Advanced polymer designs for direct-ink-write 3D printing, Chem. Eur J., 25, 10768, 10.1002/chem.201900975 Huang, 2021, Embedded direct ink writing of freeform ceramic components, Appl. Mater. Today, 23 Wang, 2022, Phase-Change-Enabled, Rapid, High-Resolution Direct Ink Writing of Soft Silicone, Adv. Mater., 34 Wu, 2022, Embedded extrusion printing in yield-stress-fluid baths, Matter, 5, 3775, 10.1016/j.matt.2022.09.003 Sim, 2022, Biomarkers and Detection Platforms for Human Health and Performance Monitoring: A Review, Adv. Sci., 9, 10.1002/advs.202104426 Jang, 2009, Influence of fluid physical properties on ink-jet printability, Langmuir, 25, 2629, 10.1021/la900059m Rupp, 2020, 3D Printing of Core–Shell Capsule Composites for Post-Reactive and Damage Sensing Applications, Adv. Mater. Technol., 5, 10.1002/admt.202000509 Berdozzi, 2020, Rapid fabrication of electro-adhesive devices with inkjet printed electrodes, IEEE Rob. Autom. Lett., 5, 2770, 10.1109/LRA.2020.2972838 Zapka, 2022 Perumanath, 2023, Contaminant removal from nature’s self-cleaning surfaces, Nano Lett., 23, 4234, 10.1021/acs.nanolett.3c00257 Hoffmann, 2023, In-space additive manufacture: A review, J. Manuf. Sci. Eng., 145 Cai, 2021, Mechanisms, influencing factors, and applications of electrohydrodynamic jet printing, Nanotechnol. Rev., 10, 1046, 10.1515/ntrev-2021-0073 Li, 2023, Substrate-Independent Electrohydrodynamic Jet Printing with Dual-Ring Electrostatic Focusing Structure, Adv. Mater. Technol., 8, 10.1002/admt.202201842 Park, 2007, High-resolution electrohydrodynamic jet printing, Nat. Mater., 6, 782, 10.1038/nmat1974 Zhang, 2022, Aerial additive manufacture with multiple autonomous robots, Nature, 609, 709, 10.1038/s41586-022-04988-4 Rafiee, 2020, Multi-material 3D and 4D printing: a survey, Adv. Sci., 7, 10.1002/advs.201902307 Mora, 2022, 3D printed architected lattice structures by material jetting, Mater. Today, 59, 107, 10.1016/j.mattod.2022.05.008 Tan, 2020, Recent progress on polymer materials for Additive manufacture, Adv. Funct. Mater., 30, 10.1002/adfm.202003062 Ziaee, 2019, Binder jetting: A review of process, materials, and methods, Addit. Manuf., 28, 781 Mostafaei, 2022, Defects and anomalies in powder bed fusion metal additive manufacture, Curr. Opin. Solid State Mater. Sci., 26, 10.1016/j.cossms.2021.100974 Gu, 2021, Material-structure-performance integrated laser-metal additive manufacture, Science, 372, 10.1126/science.abg1487 Padmakumar, 2020, Additive manufacture of tungsten carbide hardmetal parts by selective laser melting (SLM), selective laser sintering (SLS) and binder jet 3D printing (BJ3DP) techniques, Lasers Manuf. Mater. Process., 7, 338, 10.1007/s40516-020-00124-0 Rafiee, 2020, Multi-Material 3D and 4D Printing: A Survey, Adv. Sci., 7, 10.1002/advs.201902307 Wu, 2020, Recent developments in polymers/polymer nanocomposites for additive manufacture, Prog. Mater. Sci., 111, 10.1016/j.pmatsci.2020.100638 Yan, 2023, Progress and opportunities in additive manufacture of electrically conductive polymer composites, Mater. Today Adv., 17 Saleh Alghamdi, 2021, Additive Manufacture of Polymer Materials: Progress, Promise and Challenges, Polymers, 13, 753, 10.3390/polym13050753 Vladić, 2022, Vat photopolymerization, 65 Gibson, 2015, 63 Pagac, 2021, A review of vat photopolymerization technology: Materials, applications, challenges, and future trends of 3d printing, Polymers, 13, 598, 10.3390/polym13040598 Bao, 2022, Challenges and opportunities in 3D printing of biodegradable medical devices by emerging photopolymerization techniques, Adv. Funct. Mater., 32, 10.1002/adfm.202109864 Bao, 2022, Recent Trends in Advanced Photoinitiators for Vat Photopolymerization 3D Printing, Macromol. Rapid Commun., 43, 10.1002/marc.202200202 Toombs, 2022, Volumetric additive manufacture of silica glass with microscale computed axial lithography, Science, 376, 308, 10.1126/science.abm6459 Liu, 2023, Breakthroughs in projection-enabled additive manufacture: From novel strategies to cutting-edge applications, Innovation, 4 Murphy, 2022, Next Evolution in Organ-Scale Biofabrication: Bioresin Design for Rapid High-Resolution Vat Polymerization, Adv. Mater., 34, 10.1002/adma.202107759 Lancia, 2019, Life-like motion driven by artificial molecular machines, Nat. Rev. Chem, 3, 536, 10.1038/s41570-019-0122-2 Park, 2022, 3D printing of polymer composites: Materials, processes, and applications, Matter, 5, 43, 10.1016/j.matt.2021.10.018 Wang, 2022, Stiffness control in dual color tomographic volumetric 3D printing, Nat. Commun., 13, 367, 10.1038/s41467-022-28013-4 Zhu, 2023, Introducing Dynamic Bonds in Light-based 3D Printing, Adv. Funct. Mater., 2300456, 10.1002/adfm.202300456 Wu, 2023, Interfacial Regulation for 3D Printing based on Slice-Based Photopolymerization, Adv. Mater., 35, 10.1002/adma.202300903 Maurel, 2021, Toward high resolution 3D Printing of shape-conformable batteries via vat photopolymerization: Review and perspective, IEEE Access, 9, 140654, 10.1109/ACCESS.2021.3119533 Zou, 2022, Digital Light Processing 3D-Printed Silica Aerogel and as a Versatile Host Framework for High-Performance Functional Nanocomposites, Adv. Sci., 9, 10.1002/advs.202204906 Selvakannan, 2022, Material Extrusion and Vat Photopolymerization—Principles, Opportunities and Challenges, Addit. Manuf. Chem. Sci. Eng., 53 Chen, 2019, Dynamic photomask-assisted direct ink writing multimaterial for multilevel triboelectric nanogenerator, Adv. Funct. Mater., 29 Wang, 2022, Freeform Fabrication of Pneumatic Soft Robots via Multi-Material Jointed Direct Ink Writing, Macromol. Mater. Eng., 307, 10.1002/mame.202270015 Li, 2021, Limpet tooth-inspired painless microneedles fabricated by magnetic field-assisted 3D printing, Adv. Funct. Mater., 31 Pan, 2022, A Highly Compressible, Elastic, and Air-Dryable Metallic Aerogels via Magnetic Field-Assisted Synthesis, Adv. Funct. Mater., 32, 10.1002/adfm.202204166 Al-Milaji, 2019, Inkjet Printing of Magnetic Particles Toward Anisotropic Magnetic Properties, Sci. Rep., 9, 10.1038/s41598-019-52699-0 Bernasconi, 2022, Piezoelectric drop-on-demand inkjet printing of high-viscosity inks, Adv. Eng. Mater., 24, 10.1002/adem.202100733 Liu, 2022, Current understanding of the applications of photocrosslinked hydrogels in biomedical engineering, Gels, 8, 216, 10.3390/gels8040216 Miri, 2019, Multiscale bioprinting of vascularized models, Biomaterials, 198, 204, 10.1016/j.biomaterials.2018.08.006 Bertlein, 2017, Thiol-Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies, Adv. Mater., 29, 10.1002/adma.201703404 Birman, 2021, Injectability of biosynthetic hydrogels: consideration for minimally invasive surgical procedures and 3D bioprinting, Adv. Funct. Mater., 31, 10.1002/adfm.202100628 Jung, 2020, Designing with light: advanced 2D, 3D, and 4D materials, Adv. Mater., 32, 10.1002/adma.201903850 Huang, 2023, One-pot ternary sequential reactions for photopatterned gradient multimaterials, Matter, 6, 2419, 10.1016/j.matt.2023.05.040 Chimene, 2020, Hydrogel Bioink Reinforcement for Additive Manufacture: A Focused Review of Emerging Strategies, Adv. Mater., 32, 10.1002/adma.201902026 Fang, 2022, 3D printing of cell-laden microgel-based biphasic bioink with heterogeneous microenvironment for biomedical applications, Adv. Funct. Mater., 32, 10.1002/adfm.202109810 GhavamiNejad, 2020, Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels, Small, 16 Sather, 2021, 3D printing of supramolecular polymer hydrogels with hierarchical structure, Small, 17, 10.1002/smll.202005743 Moroni, 2018, Biofabrication strategies for 3D in vitro models and regenerative medicine, Nat. Rev. Mater., 3, 21, 10.1038/s41578-018-0006-y Fang, 2022, A Shift from Efficiency to Adaptability: Recent Progress in Biomimetic Interactive Soft Robotics in Wet Environments, Adv. Sci., 9, 10.1002/advs.202104347 Ebrahimi, 2021, Magnetic actuation methods in bio/soft robotics, Adv. Funct. Mater., 31, 10.1002/adfm.202005137 Fan, 2022, Scale-reconfigurable miniature ferrofluidic robots for negotiating sharply variable spaces, Sci. Adv., 8, 10.1126/sciadv.abq1677 Shintake, 2018, Soft robotic grippers, Adv. Mater., 30, 10.1002/adma.201707035 Chi, 2022, Bistable and Multistable Actuators for Soft Robots: Structures, Materials, and Functionalities, Adv. Mater., 34, 10.1002/adma.202110384 Xu, 2023, Upcycling chlorinated waste plastics, Nat. Rev. Methods Primers, 3, 44, 10.1038/s43586-023-00227-w Kuhnt, 2022, 4D printed shape morphing biocompatible materials based on anisotropic ferromagnetic nanoparticles, Adv. Funct. Mater., 32 Liu, 2022, Recent Advances in Stimuli-Responsive Shape-Morphing Hydrogels, Adv. Funct. Mater., 32 Zhang, 2022, Reconfigurable magnetic liquid metal robot for high-performance droplet manipulation, Nano Lett., 22, 2923, 10.1021/acs.nanolett.2c00100 Pott, 2020, Investigation of the incompatibilities of cement and superplasticizers and their influence on the rheological behavior, Materials, 13, 977, 10.3390/ma13040977 Saidy, 2019, Biologically inspired scaffolds for heart valve tissue engineering via melt electrowriting, Small, 15, 10.1002/smll.201900873 O’Connor, 2022, Engineering the multiscale complexity of vascular networks, Nat. Rev. Mater., 7, 702, 10.1038/s41578-022-00447-8 Liu, 2021, 3D liver tissue model with branched vascular networks by multimaterial bioprinting, Adv. Healthcare Mater., 10 Szklanny, 2021, 3D bioprinting of engineered tissue flaps with hierarchical vessel networks (VesselNet) for direct host-to-implant perfusion, Adv. Mater., 33 Ha, 2022, Bone microenvironment-mimetic scaffolds with hierarchical microstructure for enhanced vascularization and bone regeneration, Adv. Funct. Mater., 32, 10.1002/adfm.202200011 Yan, 2020, 3D printing of bioinspired textured surfaces with superamphiphobicity, Nanoscale, 12, 2924, 10.1039/C9NR09620E Jiang, 2020, Extrusion 3D printing of polymeric materials with advanced properties, Adv. Sci., 7, 10.1002/advs.202001379 Hemath, 2020, A comprehensive review on mechanical, electromagnetic radiation shielding, and thermal conductivity of fibers/inorganic fillers reinforced hybrid polymer composites, Polym. Compos., 41, 3940, 10.1002/pc.25703 Grejtak, 2020, Whisker orientation controls wear of 3D-printed epoxy nanocomposites, Addit. Manuf., 36 Pan, 2023, Boosting Cycling Stability of Polymer Sodium Battery by “Rigid-Flexible” Coupled Interfacial Stress Modulation, Nano Lett., 23, 3630, 10.1021/acs.nanolett.2c04854 Rong, 2022, A free-sealed high-voltage aqueous polymeric sodium battery enabling operation at −25 °C, Cell Rep. Phys. Sci., 3 Selvaraj, 2022, Characterization of mechanical and dynamic properties of natural fiber reinforced laminated composite multiple-core sandwich plates, Compos. Struct., 284, 10.1016/j.compstruct.2021.115141 Shi, 2021, Study on performance characteristics of fused deposition modeling 3D-printed composites by blending and lamination, J. Appl. Polym. Sci., 138, 10.1002/app.49926 Ramachandran, 2022, Modification of fibers and matrices in natural fiber reinforced polymer composites: A comprehensive review, Macromol. Rapid Commun., 43, 10.1002/marc.202100862 Li, 2023, A review of carbon fiber surface modification methods for tailor-made bond behavior with cementitious matrices, Prog. Mater. Sci., 132, 10.1016/j.pmatsci.2022.101040 Moore, 2020, Three-dimensional printing of multicomponent glasses using phase-separating resins, Nat. Mater., 19, 212, 10.1038/s41563-019-0525-y Huo, 2020, Ultrastrong hierarchical porous materials via colloidal assembly and oxidation of metal particles, Adv. Funct. Mater., 30, 10.1002/adfm.202003550 Doyle, 2021, Printing between the lines: Intricate biomaterial structures fabricated via negative embodied sacrificial template 3D (NEST3D) printing, Adv. Mater. Technol., 6, 10.1002/admt.202100189 Sanz-Horta, 2023, Polycaprolactone with multiscale porosity and patterned surface topography prepared using sacrificial 3D printed moulds: Towards tailor-made scaffolds, Biomater. Adv., 151, 10.1016/j.bioadv.2023.213465 Dong, 2021, 3D printing of inherently nanoporous polymers via polymerization-induced phase separation, Nat. Commun., 12, 247, 10.1038/s41467-020-20498-1 Wang, 2022, Facile synthesis of porous geopolymers via the addition of a water-soluble pore forming agent, Ceram. Int., 48, 2853, 10.1016/j.ceramint.2021.10.075 Wei, 2022, 3D Printed CO2-Based Triblock Copolymers and Post-Printing Modification, Angew. Chem. Int. Ed., 61, 10.1002/anie.202208355 Praveen, 2023, 3D-Printed Silicone Substrates as Highly Deformable Electrodes for Stretchable Li-Ion Batteries, Small, 19, 10.1002/smll.202205817 Hasanzadeh, 2022, Cost-effective and reproducible technologies for fabrication of tissue engineered scaffolds: The state-of-the-art and future perspectives, Polymer, 244, 10.1016/j.polymer.2022.124681 Yang, 2022, Combination of 3D printing and electrospinning techniques for biofabrication, Adv. Mater. Technol., 7 Siddiqui, 2020, Facile fabrication of porous open-cell polymer structures from sacrificial “natural templates” and composite resins, J. Porous Mater., 27, 1013, 10.1007/s10934-020-00878-0 Peng, 2021, Tailored and highly stretchable sensor prepared by crosslinking an enhanced 3D printed UV-curable sacrificial mold, Adv. Funct. Mater., 31, 10.1002/adfm.202008729 Seymour, 2021, 3D printing of microgel scaffolds with tunable void fraction to promote cell infiltration, Adv. Healthcare Mater., 10, 10.1002/adhm.202100644 Zadeh, 2020, Fabrication of Cellulose Hydrogel Objects Through 3D Printed Sacrificial Molds, 265 Vaithilingam, 2017, Combined inkjet printing and infrared sintering of silver nanoparticles using a swathe-by-swathe and layer-by-layer approach for 3-dimensional structures, ACS Appl. Mater. Interfaces, 9, 6560, 10.1021/acsami.6b14787 Biswas, 2021, 4D printing of shape memory materials for textiles: Mechanism, mathematical modeling, and challenges, Adv. Funct. Mater., 31, 10.1002/adfm.202100257 Zhang, 2021, 3D printing of functional magnetic materials: From design to applications, Adv. Funct. Mater., 31, 2102777, 10.1002/adfm.202102777 Cheng, 2022, Centrifugal multimaterial 3D printing of multifunctional heterogeneous objects, Nat. Commun., 13, 7931, 10.1038/s41467-022-35622-6 Kokkinis, 2015, Multimaterial magnetically assisted 3D printing of composite materials, Nat. Commun., 6, 8643, 10.1038/ncomms9643 Skylar-Scott, 2019, Voxelated soft matter via multimaterial multinozzle 3D printing, Nature, 575, 330, 10.1038/s41586-019-1736-8 Rafiee, 2021, Advances in coaxial additive manufacture and applications, Adv. Mater. Technol., 6, 10.1002/admt.202100356 Zhu, 2020, 3D printing of multi-scalable structures via high penetration near-infrared photopolymerization, Nat. Commun., 11, 3462, 10.1038/s41467-020-17251-z Zhu, 2023, 3D-Printed High-Frequency Dielectric Elastomer Actuator toward Insect-Scale Ultrafast Soft Robot, ACS Mater. Lett., 5, 704, 10.1021/acsmaterialslett.2c00991 Weeks, 2023, Embedded 3D Printing of Multimaterial Polymer Lattices via Graph-Based Print Path Planning, Adv. Mater., 35, 10.1002/adma.202206958 Hainsworth, 2020, A fabrication free, 3D printed, multi-material, self-sensing soft actuator, IEEE Rob. Autom. Lett., 5, 4118, 10.1109/LRA.2020.2986760 Kim, 2023, A ‘print–pause–print’protocol for 3D printing microfluidics using multimaterial stereolithography, Nat. Protoc., 18, 1243, 10.1038/s41596-022-00792-6 Li, 2019, Multimaterial microfluidic 3D printing of textured composites with liquid inclusions, Adv. Sci., 6 Mayer, 2019, Multimaterial 3D laser microprinting using an integrated microfluidic system, Sci. Adv., 5, 10.1126/sciadv.aau9160 Hassan, 2022, Microfluidic Printheads for Highly Switchable Multimaterial 3D Printing of Soft Materials, Adv. Mater. Technol., 7, 10.1002/admt.202101709 Larson, 2023, Rotational multimaterial printing of filaments with subvoxel control, Nature, 613, 682, 10.1038/s41586-022-05490-7 Liu, 2022, Magnetically assisted drop-on-demand 3D printing of microstructured multimaterial composites, Nat. Commun., 13, 5015, 10.1038/s41467-022-32792-1 Shaukat, 2022, A review of multi-material 3D printing of functional materials via vat photopolymerization, Polymers, 14, 2449, 10.3390/polym14122449 Yue, 2023, Single-vat single-cure grayscale digital light processing 3D printing of materials with large property difference and high stretchability, Nat. Commun., 14, 1251, 10.1038/s41467-023-36909-y Ravanbakhsh, 2021, Emerging technologies in multi-material bioprinting, Adv. Mater., 33, 10.1002/adma.202104730 Chávez-Madero, 2020, Using chaotic advection for facile high-throughput fabrication of ordered multilayer micro- and nanostructures: continuous chaotic printing, Biofabrication, 12, 10.1088/1758-5090/ab84cc Şahin, 2022, Assessment of materials, design parameters and some properties of 3D printing concrete mixtures; a state-of-the-art review, Constr. Build. Mater., 316, 10.1016/j.conbuildmat.2021.125865 Schwab, 2020, Printability and shape fidelity of bioinks in 3D bioprinting, Chem. Rev., 120, 11028, 10.1021/acs.chemrev.0c00084 Varaprasad, 2022, The significance of biomacromolecule alginate for the 3D printing of hydrogels for biomedical applications, Int. J. Biol. Macromol., 212, 561, 10.1016/j.ijbiomac.2022.05.157 Van Genderen, 2022, Co-axial printing of convoluted proximal tubule for kidney disease modeling, Biofabrication, 14, 10.1088/1758-5090/ac7895 Tang, 2023, Liquid-embedded (bio) printing of alginate-free, standalone, ultrafine, and ultrathin-walled cannular structures, Proc. Natl. Acad. Sci. USA, 120, 10.1073/pnas.2206762120 Lei, 2023, Soft Hydrogel Shapeability via Supportive Bath Matching in Embedded 3D Printing, Adv. Mater. Technol., 10.1002/admt.202370069 Jin, 2020, Machine learning for advanced additive manufacture, Matter, 3, 1541, 10.1016/j.matt.2020.08.023 Loke, 2019, Structured multimaterial filaments for 3D printing of optoelectronics, Nat. Commun., 10, 4010, 10.1038/s41467-019-11986-0 Hu, 2020, Advances in fused deposition modeling of discontinuous fiber/polymer composites, Curr. Opin. Solid State Mater. Sci., 24, 10.1016/j.cossms.2020.100867 Osman, 2023, 3D printing of polymer compositors to fabricate wearable sensors: A comprehensive review, Mater. Sci. Eng. R Rep., 154, 10.1016/j.mser.2023.100734 Koroglu, 2021, 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview, Macromol. Mater. Eng., 306, 10.1002/mame.202100277 Juneja, 2022, Impact of process variables of acetone vapor jet drilling on surface roughness and circularity of 3D-printed ABS Parts: Fabrication and studies on thermal, morphological, and chemical characterizations, Polymers, 14, 1367, 10.3390/polym14071367 Milyutin, 2021, Fabricating and printing chemiresistors based on monolayer-capped metal nanoparticles, Nat. Protoc., 16, 2968, 10.1038/s41596-021-00528-y Wen, 2021, 3D-printed silica with nanoscale resolution, Nat. Mater., 20, 1506, 10.1038/s41563-021-01111-2 Bobrin, 2023, The Emergence of Reversible–Deactivation Radical Polymerization in 3D Printing, Adv. Mater. Technol., 8, 10.1002/admt.202201054 Xie, 2023, Volumetric additive manufacture of pristine silk-based (bio) inks, Nat. Commun., 14, 210, 10.1038/s41467-023-35807-7 Champeau, 2020, 4D printing of hydrogels: a review, Adv. Funct. Mater., 30, 10.1002/adfm.201910606 Dong, 2020, 4D printed hydrogels: fabrication, materials, and applications, Adv. Mater. Technol., 5 Puza, 2022, 3D printing of polymer hydrogels—from basic techniques to programmable actuation, Adv. Funct. Mater., 32, 10.1002/adfm.202205345 Ganguly, 2022, 3D printed magnetic polymer composite hydrogels for hyperthermia and magnetic field driven structural manipulation, Prog. Polym. Sci., 131, 10.1016/j.progpolymsci.2022.101574 Díez, 2021, Magnetorheological elastomer-based materials and devices: state of the art and future perspectives, Adv. Eng. Mater., 23, 10.1002/adem.202170023 Hao, 2022, Low melting point alloys enabled stiffness tunable advanced materials, Adv. Funct. Mater., 32, 10.1002/adfm.202201942 Zhang, 2021, EPM–MRE: electropermanent magnet–magnetorheological elastomer for soft actuation system and its application to robotic grasping, IEEE Rob. Autom. Lett., 6, 8181, 10.1109/LRA.2021.3100939 McDonald, 2022, Modulation of magnetorheological fluid flow in soft robots using electropermanent magnets, IEEE Rob. Autom. Lett., 7, 3914, 10.1109/LRA.2022.3147873 Fang, 2021, Soft robotic manipulator for intraoperative MRI-guided transoral laser microsurgery, Sci. Robot., 6, eabg5575, 10.1126/scirobotics.abg5575 Erin, 2020, Magnetic resonance imaging system–driven medical robotics, Adv. Intell. Syst., 2, 10.1002/aisy.201900110 Tiryaki, 2022, Magnetic Resonance Imaging-Based Tracking and Navigation of Submillimeter-Scale Wireless Magnetic Robots, Adv. Intell. Syst., 4, 10.1002/aisy.202100178 Chen, 2023, Bioinspired hydrogel actuator for soft robotics: Opportunity and challenges, Nano Today, 49, 10.1016/j.nantod.2023.101764 Shafranek, 2019, Stimuli-responsive materials in Additive manufacture, Prog. Polym. Sci., 93, 36, 10.1016/j.progpolymsci.2019.03.002 Wilt, 2021, Direct ink writing techniques for in situ gelation and solidification, MRS Commun., 11, 106, 10.1557/s43579-020-00006-8 Gao, 2022, Emerging application of 3D-printing techniques in lithium batteries: From liquid to solid, Mater. Today, 59, 161, 10.1016/j.mattod.2022.07.016 Keane, 2023, Post-processing methods for 3D printed biopolymers, 229 Mohd Yusoff, 2023, Optimization strategies and emerging application of functionalized 3D-printed materials in water treatment: A review, J. Water Process Eng., 51 Bergonzi, 2019, Study of 3D-printed chitosan scaffold features after different post-printing gelation processes, Sci. Rep., 9, 362, 10.1038/s41598-018-36613-8 Soliman, 2023, Programming Delayed Dissolution into Sacrificial Bioinks for Dynamic Temporal Control of Architecture within 3D-Bioprinted Constructs, Adv. Funct. Mater., 33 Tan, 2021, Smart polymers for microscale machines, Adv. Funct. Mater., 31, 10.1002/adfm.202007125 Wu, 2015, Review: Polymeric-based 3D printing for tissue engineering, J. Med. Biol. Eng., 35, 285, 10.1007/s40846-015-0038-3 de Melo, 2019, 3D printed cartilage-like tissue constructs with spatially controlled mechanical properties, Adv. Funct. Mater., 29 Zub, 2022, Inkjet printing and 3D printing strategies for biosensing, analytical, and diagnostic applications, Adv. Mater., 34, 10.1002/adma.202105015 Ramiah Rajasekaran, 2020, 3D-Printed electrochemical sensor-integrated transwell systems, Microsyst. Nanoeng., 6, 100, 10.1038/s41378-020-00208-z Chatterjee, 2020, 3D printing of textiles: potential roadmap to printing with fibers, Adv. Mater., 32, 10.1002/adma.201902086 Valentine, 2017, Hybrid 3D printing of soft electronics, Adv. Mater., 29, 10.1002/adma.201703817 Lopes, 2018, Hydroprinted electronics: ultrathin stretchable Ag–In–Ga E-skin for bioelectronics and human–machine interaction, ACS Appl. Mater. Interfaces, 10, 38760, 10.1021/acsami.8b13257 Han, 2020, 4D printing of a bioinspired microneedle array with backward-facing barbs for enhanced tissue adhesion, Adv. Funct. Mater., 30, 10.1002/adfm.201909197 Zaidi, 2021, Actuation technologies for soft robot grippers and manipulators: A review, Curr. Robot. Rep., 2, 355, 10.1007/s43154-021-00054-5 Nguyen, 2020, A tri-stable soft robotic finger capable of pinch and wrap grasps, IEEE Int. Conf. Robot. Autom., 9028 Pagoli, 2021, A soft robotic gripper with an active palm and reconfigurable fingers for fully dexterous in-hand manipulation, IEEE Rob. Autom. Lett., 6, 7706, 10.1109/LRA.2021.3098803 Tawk, 2019, 3D printable linear soft vacuum actuators: their modeling, performance quantification and application in soft robotic systems, IEEE ASME Trans. Mechatron., 24, 2118, 10.1109/TMECH.2019.2933027 Tawk, 2019, A 3D-printed omni-purpose soft gripper, IEEE Trans. Robot., 35, 1268, 10.1109/TRO.2019.2924386 Kong, 2014, 3D printed quantum dot light-emitting diodes, Nano Lett., 14, 7017, 10.1021/nl5033292 Zhu, 2018, 3D printed functional and biological materials on moving freeform surfaces, Adv. Mater., 30 Bertoncini, 2020, 3D printed waveguides based on photonic crystal fiber designs for complex fiber-end photonic devices, Optica, 7, 1487, 10.1364/OPTICA.397281 Power, 2018, A monolithic force-sensitive 3D microgripper fabricated on the tip of an optical fiber using 2-photon polymerization, Small, 14 Wang, 2016, A miniaturized optical fiber microphone with concentric nanorings grating and microsprings structured diaphragm, Amb. Express, 6, 110, 10.1186/s13568-016-0280-2 Huang, 2023, Three-dimensional printing of silica glass with sub-micrometer resolution, Nat. Commun., 14, 3305, 10.1038/s41467-023-38996-3