Uniaxial tension and compression characterization of hybrid CNS–glass fiber–epoxy composites

Zheng, 2004, Ultralong single-wall carbon nanotubes, Nat Mater, 3, 673, 10.1038/nmat1216 Srivastava, 2003, Nanomechanics of carbon nanotubes and composites, Appl Mech Rev, 56, 215, 10.1115/1.1538625 Qian, 2002, Mechanics of carbon nanotubes, Appl Mech Rev, 55, 495, 10.1115/1.1490129 Thostenson, 2001, Advances in the science and technology of carbon nanotubes and their composites: a review, Compos Sci Technol, 61, 1899, 10.1016/S0266-3538(01)00094-X Rana, 2009, A review on carbon epoxy nanocomposites, J Reinf Plast Compos, 28, 461, 10.1177/0731684407085417 Thostenson, 2005, Nanocomposites in context, Compos Sci Technol, 65, 491, 10.1016/j.compscitech.2004.11.003 Thostenson, 2002, Carbon nanotube/carbon fiber hybrid multiscale composites, J Appl Phys, 91, 6034, 10.1063/1.1466880 Kim, 2009 Zhang Q et al. Carbon nanotubes on carbon fibers: influence of growth conditions on fiber tensile properties. SAMPE fall technical conference; 2007. Bekyarova, 2007, Haddon, Functionalized Single-Walled Carbon Nanotubes for Carbon Fiber-Epoxy Composites, Journal of Physical Chemistry C., 111, 17865, 10.1021/jp071329a Malecki HC. UMBC – University of Maryland, Baltimore County Masters Thesis. In situ growth of carbon nanotubes on dynamic glass fiber substrates; 2010. Malecki HC, Zupan M, Scalable Continuous Growth of Carbon Nanotubes on Moving Fiber Substrates, Composites: Part A (2012), http://dx.doi.org/10.1016/j.compositesa.2012.06.019. ASTM D3039M-08. Standard test method for tensile properties of polymer matrix composite materials. ASTM D6641M-09. Standard test method for compressive properties of polymer matrix composite materials using a combined loading compression (CLC) test fixture. Rosen, 1965 Evans, 1978, Kinking as a mode of structural degradation in carbon fiber composites, Acta Metall, 26, 725, 10.1016/0001-6160(78)90023-8 Budiansky, 1983, Micromechanics, Comput Struct, 16, 3, 10.1016/0045-7949(83)90141-4 Budiansky, 1993, Compressive failure of fibre composites, J Mech Phys Solids, 41, 183, 10.1016/0022-5096(93)90068-Q Steif, 1990, A model for kinking in fiber composites; I. Fiber breakage via microbuckling; II. Kink band formation, Int J Solids Struct, 26, 549, 10.1016/0020-7683(90)90028-T Schapery, 1995, Prediction of compressive strength and kink bands in composites using a work potential, Int J Solids Struct, 32, 739, 10.1016/0020-7683(94)00158-S Daniel, 1994