Ultrasonic vibration-assisted superior thermal transport

E. Cooling, iNEMI roadmap identifies trends impacting electronics thermal management, Electron. Cool. (2016). https://www.electronics-cooling.com/2016/04/inemi-roadmap-identifies-trends-impacting-electronics-thermal-management/(accessed December 14, 2022). Bergman, 2011 Gebhart, 1988 Han, 1988, Developing heat transfer in rectangular channels with rib turbulators, Int. J. Heat Mass Transf., 31, 183, 10.1016/0017-9310(88)90235-9 Han, 1984, Heat transfer and friction in channels with two opposite Rib-roughened walls, J. Heat Transf., 106, 774, 10.1115/1.3246751 Singh, 2019, Effect of micro-roughness shapes on jet impingement heat transfer and fin-effectiveness, Int. J. Heat Mass Transf., 132, 80, 10.1016/j.ijheatmasstransfer.2018.11.135 Chyu, 1990, Heat transfer and pressure drop for short pin-fin arrays with Pin-Endwall fillet, J. Heat Transf., 112, 926, 10.1115/1.2910502 Chyu, 2010, Effects of height-to-diameter ratio of pin element on heat transfer from staggered Pin-Fin arrays, 705 Chyu, 1999, Heat transfer contributions of pins and Endwall in Pin-Fin arrays: effects of thermal boundary condition modeling, J. Turbomach., 121, 257, 10.1115/1.2841309 Herman, 2001, Comparative evaluation of three heat transfer enhancement strategies in a grooved channel, Heat Mass Transf, 37, 563, 10.1007/PL00005890 Mahmood, 2002, Heat transfer in a dimpled channel: combined influences of aspect ratio, temperature ratio, Reynolds number, and flow structure, Int. J. Heat Mass Transf., 45, 2011, 10.1016/S0017-9310(01)00314-3 Singh, 2017, Experimental study of heat transfer augmentation in a two-pass channel featuring V-shaped ribs and cylindrical dimples, Appl. Therm. Eng., 116, 205, 10.1016/j.applthermaleng.2017.01.098 Singh, 2017, Characterization of heat transfer enhancement and frictional losses in a two-pass square duct featuring unique combinations of rib turbulators and cylindrical dimples, Int. J. Heat Mass Transf., 106, 629, 10.1016/j.ijheatmasstransfer.2016.09.037 Kercher, 1970, Heat transfer by a square array of round air jets impinging perpendicular to a flat surface including the effect of spent air, J. Eng. Power., 92, 73, 10.1115/1.3445306 Metzger, 1991, Transient liquid crystal measurement of local heat transfer on a rotating disk with jet impingement, J. Turbomach., 113, 52, 10.1115/1.2927737 Singh, 2022, Effects of jet-to-target spacing on primary and secondary peak heat transfer for an obliquely impinging jet, Int. J. Heat Mass Transf., 191, 10.1016/j.ijheatmasstransfer.2022.122831 Singh, 2017, Effects of spent air removal scheme on internal-side heat transfer in an impingement-effusion system at low jet-to-target plate spacing, Int. J. Heat Mass Transf., 108, 998, 10.1016/j.ijheatmasstransfer.2016.12.104 Ligrani, 2003, Comparison of heat transfer augmentation techniques, AIAA J., 41, 337, 10.2514/2.1964 Ligrani, 2013, Heat transfer augmentation technologies for internal cooling of turbine components of gas turbine engines, Int. J. Rotat. Mach., 2013, 10.1155/2013/275653 Kim, 2015, Review of boiling heat transfer enhancement on micro/nanostructured surfaces, Exp. Therm. Fluid Sci., 66, 173, 10.1016/j.expthermflusci.2015.03.023 Hendricks, 2010, Enhancement of pool-boiling heat transfer using nanostructured surfaces on aluminum and copper, Int. J. Heat Mass Transf., 53, 3357, 10.1016/j.ijheatmasstransfer.2010.02.025 Shojaeian, 2015, Pool boiling and flow boiling on micro- and nanostructured surfaces, Exp. Therm. Fluid Sci., 63, 45, 10.1016/j.expthermflusci.2014.12.016 Miljkovic, 2012, Effect of droplet morphology on growth dynamics and heat transfer during condensation on Superhydrophobic nanostructured surfaces, ACS Nano, 6, 1776, 10.1021/nn205052a Enright, 2014, Dropwise condensation on Micro- and nanostructured surfaces, Nanoscale Microscale Thermophys. Eng., 18, 223, 10.1080/15567265.2013.862889 Wang, 2021, Dropwise condensation heat transfer on nanostructured superhydrophobic surfaces with different inclinations and surface subcoolings, Int. J. Heat Mass Transf., 181, 10.1016/j.ijheatmasstransfer.2021.121898 Dhir, 1998, Boiling heat transfer, Annu. Rev. Fluid Mech., 30, 365, 10.1146/annurev.fluid.30.1.365 Rose, 1999, Condensation heat transfer, Heat Mass Transf., 35, 479, 10.1007/s002310050351 Rose, 1998, Condensation heat transfer fundamentals, Chem. Eng. Res. Des., 76, 143, 10.1205/026387698524712 Chu, 2023, Progress in enhanced pool boiling heat transfer on macro- and micro-structured surfaces, Int. J. Heat Mass Transf., 200, 10.1016/j.ijheatmasstransfer.2022.123530 Miljkovic, 2013 Baby, 2013, Thermal optimization of PCM based pin fin heat sinks: an experimental study, Appl. Therm. Eng., 54, 65, 10.1016/j.applthermaleng.2012.10.056 Akhilesh, 2005, Method to improve geometry for heat transfer enhancement in PCM composite heat sinks, Int. J. Heat Mass Transf., 48, 2759, 10.1016/j.ijheatmasstransfer.2005.01.032 Dinesh, 2019, Effect of foam geometry on heat absorption characteristics of PCM-metal foam composite thermal energy storage systems, Int. J. Heat Mass Transf., 134, 866, 10.1016/j.ijheatmasstransfer.2019.01.095 Krishna, 2017, Heat pipe with nano enhanced-PCM for electronic cooling application, Exp. Therm. Fluid Sci., 81, 84, 10.1016/j.expthermflusci.2016.10.014 Zhang, 2021, A review of the state-of-the-art in electronic cooling, E-Prime - Adv. Electr. Eng. Electron. Energy., 1 Baby, 2012, Experimental investigations on phase change material based finned heat sinks for electronic equipment cooling, Int. J. Heat Mass Transf., 55, 1642, 10.1016/j.ijheatmasstransfer.2011.11.020 Baby, 2013, Experimental investigations on thermal performance enhancement and effect of orientation on porous matrix filled PCM based heat sink, Int. Commun. Heat Mass Transf., 46, 27, 10.1016/j.icheatmasstransfer.2013.05.018 Lemlich, 1955, Effect of vibration on natural convective heat transfer, Ind. Eng. Chem., 47, 1175, 10.1021/ie50546a024 Lemlich, 1961, The effect of vibration on natural convective mass transfer, AIChE J, 7, 240, 10.1002/aic.690070214 Armaly, 1971, Heat transfer from an oscillating horizontal wire, J. Heat Transf., 93, 239, 10.1115/1.3449796 Deaver, 1962, Heat transfer from an oscillating horizontal wire to water, J. Heat Transf., 84, 251, 10.1115/1.3684354 Fand, 1962, Mechanism of interaction between vibrations and heat transfer, J. Acoust. Soc. Am., 34, 1887, 10.1121/1.1909146 Rahimi, 2012, Experimental study on the effects of acoustic streaming of high frequency ultrasonic waves on convective heat transfer: effects of transducer position and wave interference, Int. Commun. Heat Mass Transf., 39, 720, 10.1016/j.icheatmasstransfer.2012.03.013 Fand, 1960, Acoustic streaming near a heated cylinder, J. Acoust. Soc. Am., 32, 579, 10.1121/1.1908151 Holman, 1960, On the effects of sound waves on heat transfer, J. Acoust. Soc. Am., 32, 10.1121/1.1908085 Cai, 2010, Augmentation of natural convective heat transfer by acoustic cavitation, Front. Energy Power Eng. China., 4, 313, 10.1007/s11708-009-0064-3 Chen, 2018, Experimental test and empirical correlation development for heat transfer enhancement under ultrasonic vibration, Appl. Therm. Eng., 143, 639, 10.1016/j.applthermaleng.2018.07.133 Mongkolkitngam, 2021, Thermal characterization of a heating cylinder under ultrasonic effects, Int. J. Heat Mass Transf., 175, 10.1016/j.ijheatmasstransfer.2021.121393 Chen, 2019, Improvement of ultrasonic heat transfer enhancement using acoustical focusing and resonance properties, Int. Commun. Heat Mass Transf., 104, 60, 10.1016/j.icheatmasstransfer.2019.03.002 Baxi, 1969, Effect of vibration on heat transfer from spheres, J. Heat Transf., 91, 337, 10.1115/1.3580169 Kiani, 2012, The effect of ultrasound irradiation on the convective heat transfer rate during immersion cooling of a stationary sphere, Ultrason. Sonochem., 19, 1238, 10.1016/j.ultsonch.2012.04.009 Monnot, 2007, Enhancement of cooling rate by means of high frequency ultrasound, Heat Transf. Eng., 28, 3, 10.1080/01457630600985485 Y.T. Tsui, The Effect of Vibration on Heat Transfer Coefficients, Ph.D., The Ohio State University, n.d. https://www.proquest.com/docview/301991161/citation/4FACA9AFB5344F28PQ/1 (accessed December 31, 2022). Nag, 1982, Effect of vibration on natural convection heat transfer from vertical fin arrays, Lett. Heat Mass Transf., 9, 487, 10.1016/0094-4548(82)90020-0 Nomura, 2002, Ultrasonic heat transfer enhancement using a horn-type transducer, Jpn. J. Appl. Phys., 41, 3217, 10.1143/JJAP.41.3217 Nomura, 2005, Ultrasonic heat transfer enhancement with obstacle in front of heating surface, Jpn. J. Appl. Phys., 44, 4674, 10.1143/JJAP.44.4674 Nomura, 2000, Effects of changes in frequency of ultrasonic vibrations on heat transfer, Heat Transfer—Asian Res., 29, 358, 10.1002/1523-1496(200007)29:5<358::AID-HTJ2>3.0.CO;2-3 Fu, 1993, Transient thermal convection in an enclosure induced simultaneously by gravity and vibration, Int. J. Heat Mass Transf., 36, 437, 10.1016/0017-9310(93)80019-Q Cai, 2009, Numerical simulation on enhancement of natural convection heat transfer by acoustic cavitation in a square enclosure, Appl. Therm. Eng., 29, 1973, 10.1016/j.applthermaleng.2008.09.015 Cisse, 2004, Rayleigh Bénard convective instability of a fluid under high-frequency vibration, Int. J. Heat Mass Transf., 47, 4101, 10.1016/j.ijheatmasstransfer.2004.05.002 Shevtsova, 2010, Experimental and theoretical study of vibration-induced thermal convection in low gravity, J. Fluid Mech., 648, 53, 10.1017/S0022112009993442 Mialdun, 2008, Experimental evidence of thermal vibrational convection in a nonuniformly heated fluid in a reduced gravity environment, Phys. Rev. Lett., 101, 10.1103/PhysRevLett.101.084501 Tajik, 2013, Heat transfer enhancement by acoustic streaming in a closed cylindrical enclosure filled with water, Int. J. Heat Mass Transf., 60, 230, 10.1016/j.ijheatmasstransfer.2012.12.066 Talebi, 2017, Numerical investigation of natural convection heat transfer in a cylindrical enclosure due to ultrasonic vibrations, Ultrasonics, 76, 52, 10.1016/j.ultras.2016.12.010 Wang, 2020, Vibration-induced boundary-layer destabilization achieves massive heat-transport enhancement, Sci. Adv., 6, eaaz8239, 10.1126/sciadv.aaz8239 Wu, 2022, Massive heat transfer enhancement of Rayleigh-Bénard turbulence over rough surfaces and under horizontal vibration, Acta Mech. Sin., 38, 10.1007/s10409-021-09042-x Daghooghi-Mobarakeh, 2022, Augmentation of natural convection heat transfer in enclosures via ultrasound: effects of power, frequency and temperature, Therm. Sci. Eng. Prog., 33 Urban, 2022, Thermal waves and heat transfer efficiency enhancement in harmonically modulated turbulent thermal convection, Phys. Rev. Lett., 128, 10.1103/PhysRevLett.128.134502 Singh, 2016, Experimental and numerical study of heat transfer due to developing flow in a two-pass rib roughened square duct, Int. J. Heat Mass Transf., 102, 1245, 10.1016/j.ijheatmasstransfer.2016.07.015 Singh, 2018, Experimental and numerical investigation of heat and fluid flow in a square duct featuring criss-cross rib patterns, Appl. Therm. Eng., 128, 415, 10.1016/j.applthermaleng.2017.09.036 Burgess, 2003, Nusselt number behavior on deep dimpled surfaces within a channel, J. Heat Transf., 125, 11, 10.1115/1.1527904 Sundaram, 2021, Enhanced fin-effectiveness of micro-scale concentric-shape roughened target surface subjected to array jet impingement, Int. J. Heat Mass Transf., 173, 10.1016/j.ijheatmasstransfer.2021.121148 Kaur, 2019, Thermal-hydraulic performance enhancement by the combination of rectangular winglet pair and V-shaped dimples, J. Therm. Sci. Eng. Appl., 12 Kaur, 2020, Enhanced thermal hydraulic performance by V-shaped protrusion for gas turbine blade trailing edge cooling, Int. J. Heat Mass Transf., 149, 10.1016/j.ijheatmasstransfer.2019.119221 Yang, 2018, Experimental investigation of rotational effects on heat transfer enhancement due to crossflow-induced swirl using transient liquid crystal thermography, J. Therm. Sci. Eng. Appl., 10, 10.1115/1.4038538 Singh, 2023, Swirl jet impingement heat transfer: effect of jet-to-target spacing, jet Reynolds number and orientation with flat target, Int. J. Therm. Sci., 184, 10.1016/j.ijthermalsci.2022.107993 Ji, 2017, Effect of crossflow regulation by varying jet diameters in streamwise direction on jet impingement heat transfer under maximum crossflow condition, Numer Heat Transf Part Appl, 72, 579, 10.1080/10407782.2017.1394136 Singh, 2020, An experimental and numerical investigation of forced convection in high porosity aluminum foams subjected to jet array impingement in channel-flow, Int. J. Heat Mass Transf., 149, 10.1016/j.ijheatmasstransfer.2019.119107 Singh, 2020, The effect of metal foam thickness on jet array impingement heat transfer in high-porosity aluminum foams, J. Heat Transf., 142, 10.1115/1.4045640 Panse, 2019, Thermal hydraulic performance augmentation by high-porosity thin aluminum foams placed in high aspect ratio ducts, Appl. Therm. Eng., 161, 10.1016/j.applthermaleng.2019.114162 Nithyanandam, 2022, Enhanced forced convection through thin metal foams placed in rectangular ducts, Heat Transf. Eng., 0, 1 Kaur, 2022, Thermal-hydraulic performance of additively manufactured lattices for gas turbine blade trailing edge cooling, Appl. Therm. Eng., 211, 10.1016/j.applthermaleng.2022.118461 Kaur, 2021, Endwall heat transfer characteristics of octahedron family lattice-frame materials, Int. Commun. Heat Mass Transf., 127, 10.1016/j.icheatmasstransfer.2021.105522 Kaur, 2022, Direct pore-scale simulations of fully periodic unit cells of different regular lattices, J. Heat Transf., 144, 10.1115/1.4053204 Kaur, 2020, Flow and thermal transport through unit cell topologies of cubic and octahedron families, Int. J. Heat Mass Transf., 158, 10.1016/j.ijheatmasstransfer.2020.119784 Aider, 2022, Periodic heat transfer characteristics of additively manufactured lattices, Int. J. Heat Mass Transf., 189, 10.1016/j.ijheatmasstransfer.2022.122692 Kaur, 2022, Conjugate heat transfer in lattice frame materials based on novel unit cell topologies, Numer. Heat Transf. Part Appl., 82, 788, 10.1080/10407782.2022.2083874 Kaur, 2022, Numerical analysis of flow and heat transfer characteristics of lattice-based compact heat sinks, J. Electron. Packag., 145 Kaur, 2021, Flow and thermal transport characteristics of Triply-Periodic Minimal Surface (TPMS)-based gyroid and Schwarz-P cellular materials, Numer. Heat Transf. Part Appl., 79, 553, 10.1080/10407782.2021.1872260 Sundén, 2012 Anantanarayanan, 2022, Effect of vibration on heat transfer from a wire to air in parallel flow, Trans. Am. Soc. Mech. Eng., 80, 1426 Van Der Hegge Zijnen, 1958, Heat transfer from horizontal cylinders to a turbulent air flow, Appl. Sci. Res. Sect. A., 7, 205, 10.1007/BF03184649 Sreenivasan, 1961, Effect of vibration on heat transfer from a horizontal cylinder to a normal air stream, Int. J. Heat Mass Transf., 3, 60, 10.1016/0017-9310(61)90006-0 Kiani, 2013, Effects of processing parameters on the convective heat transfer rate during ultrasound assisted low temperature immersion treatment of a stationary sphere, J. Food Eng., 115, 384, 10.1016/j.jfoodeng.2012.10.029 Bergles, 1965, The influence of ultrasonic vibrations on heat transfer to water flowing in annuli, Int. J. Heat Mass Transf., 8, 1273, 10.1016/0017-9310(65)90055-4 Dhanalakshmi, 2012, Acoustic enhancement of heat transfer in furnace tubes, Chem. Eng. Process. Process Intensif., 59, 36, 10.1016/j.cep.2012.05.001 Bulliard-Sauret, 2019, Heat transfer intensification by low or high frequency ultrasound: thermal and hydrodynamic phenomenological analysis, Exp. Therm. Fluid Sci., 104, 258, 10.1016/j.expthermflusci.2019.03.003 Bulliard-Sauret, 2017, Heat transfer enhancement using 2MHz ultrasound, Ultrason. Sonochem., 39, 262, 10.1016/j.ultsonch.2017.04.021 Tam, 2017, Experimental study of the ultrasonic effect on heat transfer inside a horizontal mini-tube in the laminar region, Appl. Therm. Eng., 114, 1300, 10.1016/j.applthermaleng.2016.09.166 Liu, 2017, Experimental study on the effects of mechanical vibration on the heat transfer characteristics of tubular laminar flow, Int. J. Heat Mass Transf., 115, 169, 10.1016/j.ijheatmasstransfer.2017.07.025 Tian, 2015, An improved vibration technique for enhancing temperature uniformity and heat transfer in viscous fluid flow, Chem. Eng. Sci., 123, 609, 10.1016/j.ces.2014.11.029 Bronfenbrener, 2001, Experimental study of heat transfer intensification under vibration condition, Chem. Eng. Technol., 24, 367, 10.1002/1521-4125(200104)24:4<367::AID-CEAT367>3.0.CO;2-P Nomura, 2002, Effects of turbulence by ultrasonic vibration on fluid flow in a rectangular channel, Jpn. J. Appl. Phys., 41, 6601, 10.1143/JJAP.41.6601 Viriyananon, 2021, Characterization of heat transfer and friction loss of water turbulent flow in a narrow rectangular duct under 25–40kHz ultrasonic waves, Ultrasonics, 114, 10.1016/j.ultras.2021.106366 Inworn, 2018, On the thermal characteristic of a heating flat surface under low frequency ultrasonic waves, Int. J. Heat Mass Transf., 122, 1153, 10.1016/j.ijheatmasstransfer.2018.01.130 Poncet, 2021, Enhancement of heat transfer in forced convection by using dual low-high frequency ultrasound, Ultrason. Sonochem., 71, 10.1016/j.ultsonch.2020.105351 Zhang, 2022, Numerical study of periodical wall vibration effects on the heat transfer and fluid flow of internal turbulent flow, Int. J. Therm. Sci., 173, 10.1016/j.ijthermalsci.2021.107367 Lemlich, 1961, The effect of acoustic vibration on forced convective heat transfer, AIChE J, 7, 102, 10.1002/aic.690070124 Klaczak, 1997, Report from experiments on heat transfer by forced vibrations of exchangers, Heat Mass Transf, 32, 477, 10.1007/s002310050148 Legay, 2012, Improvement of heat transfer by means of ultrasound: application to a double-tube heat exchanger, Ultrason. Sonochem., 19, 1194, 10.1016/j.ultsonch.2012.04.001 Gondrexon, 2015, Intensification of heat and mass transfer by ultrasound: application to heat exchangers and membrane separation processes, Ultrason. Sonochem., 25, 40, 10.1016/j.ultsonch.2014.08.010 Hosseinian, 2018, Experimental study of heat transfer enhancement due to the surface vibrations in a flexible double pipe heat exchanger, Heat Mass Transf, 54, 1113, 10.1007/s00231-017-2213-2 Hosseinian, 2018, Experimental investigation of surface vibration effects on increasing the stability and heat transfer coeffcient of MWCNTs-water nanofluid in a flexible double pipe heat exchanger, Exp. Therm. Fluid Sci., 90, 275, 10.1016/j.expthermflusci.2017.09.018 Legay, 2012, Performances of two heat exchangers assisted by ultrasound, Appl. Therm. Eng., 37, 60, 10.1016/j.applthermaleng.2011.12.051 Y. Yao, X. Zhang, Y. Guo, Experimental study on heat transfer enhancement of water-water shell-and-tube heat exchanger assisted by power ultrasonic, (2010). Setareh, 2019, Experimental and numerical study on heat transfer enhancement using ultrasonic vibration in a double-pipe heat exchanger, Appl. Therm. Eng., 159, 10.1016/j.applthermaleng.2019.113867 Rohsenow, 1971, Boiling, Annu. Rev. Fluid Mech., 3, 211, 10.1146/annurev.fl.03.010171.001235 Iida, 1992, Effects of ultrasonic waves on natural convection, nucleate boiling, and film boiling heat transfer from a wire to a saturated liquid, Exp. Therm. Fluid Sci., 5, 108, 10.1016/0894-1777(92)90059-E Park, 1988, Ultrasonic enhancement of saturated and subcooled pool boiling, Int. J. Heat Mass Transf., 31, 664, 10.1016/0017-9310(88)90049-X Kim, 2004, Enhancement of natural convection and pool boiling heat transfer via ultrasonic vibration, Int. J. Heat Mass Transf., 47, 2831, 10.1016/j.ijheatmasstransfer.2003.11.033 Bartoli, 2011, Effects of ultrasonic waves on the heat transfer enhancement in subcooled boiling, Exp. Therm. Fluid Sci., 35, 423, 10.1016/j.expthermflusci.2010.11.002 Hetsroni, 2014, Ultrasonic enhancement of subcooled pool boiling of freely oscillated wires, Int. J. Multiph. Flow., 67, 13, 10.1016/j.ijmultiphaseflow.2014.05.016 Mosyak, 2016, Effect of heater size on ultrasonic enhancement of boiling in water and surfactant solutions, Int. J. Multiph. Flow., 79, 181, 10.1016/j.ijmultiphaseflow.2015.11.005 Moehrle, 2016, Pool boiling heat transfer driven by an acoustic standing wave in terrestrial gravity and microgravity, Int. J. Heat Mass Transf., 93, 322, 10.1016/j.ijheatmasstransfer.2015.09.030 Li, 2016, Influence of ultrasound on heat transfer of copper tubes with different surface characteristics in sub-cooled boiling, Appl. Therm. Eng., 92, 93, 10.1016/j.applthermaleng.2015.09.069 Wan, 2020, Saturated boiling heat transfer under ultrasound, Int. Commun. Heat Mass Transf., 115, 10.1016/j.icheatmasstransfer.2020.104511 Lienhard, 1973, Peak pool boiling heat-flux measurements on finite horizontal flat plates, J. Heat Transf., 95, 477, 10.1115/1.3450092 Jeong, 2006, Effects of ultrasonic vibration on subcooled pool boiling critical heat flux, Heat Mass Transf, 42, 1155, 10.1007/s00231-005-0079-1 Hyun, 2021, Bubble removal by electric and acoustic actuation for heat transfer enhancement, AIP Adv, 11, 10.1063/5.0042503 Lee, 2019, Enhanced thermal uniformity and stability in pool boiling heat transfer using ultrasonic actuation, Int. Commun. Heat Mass Transf., 106, 22, 10.1016/j.icheatmasstransfer.2019.03.019 Jo, 2017, Effects of capillarity on pool boiling using nano-textured surfaces through electrosprayed BiVO4 nano-pillars, Chem. Eng. Sci., 171, 360, 10.1016/j.ces.2017.05.028 MacNamara, 2019, Enhanced nucleate pool boiling on copper-diamond textured surfaces, Appl. Therm. Eng., 162, 10.1016/j.applthermaleng.2019.114145 Jo, 2017, Supersonically sprayed, triangular copper lines for pool boiling enhancement, Int. J. Heat Mass Transf., 113, 210, 10.1016/j.ijheatmasstransfer.2017.05.070 Dhadda, 2021, Electrical discharge surface texturing for enhanced pool boiling heat transfer, J. Mater. Process. Technol., 293, 10.1016/j.jmatprotec.2021.117083 Liang, 2019, Review of pool boiling enhancement by surface modification, Int. J. Heat Mass Transf., 128, 892, 10.1016/j.ijheatmasstransfer.2018.09.026 Sathyabhama, 2017, Augmentation of heat transfer coefficient in pool boiling using compound enhancement techniques, Appl. Therm. Eng., 119, 176, 10.1016/j.applthermaleng.2017.03.029 Lee, 2020, Enhanced boiling heat transfer on micro-structured surfaces via ultrasonic actuation, Int. Commun. Heat Mass Transf., 113, 10.1016/j.icheatmasstransfer.2020.104512 Boziuk, 2017, Enhanced boiling heat transfer on plain and featured surfaces using acoustic actuation, Int. J. Heat Mass Transf., 108, 181, 10.1016/j.ijheatmasstransfer.2016.11.071 Zhang, 2018, Experimental study on distribution characteristics of condensate droplets under ultrasonic vibration, Micrograv. Sci. Technol., 30, 737, 10.1007/s12217-018-9616-7 Oh, 2002, A study of the effect of ultrasonic vibrations on phase-change heat transfer, Int. J. Heat Mass Transf., 45, 4631, 10.1016/S0017-9310(02)00162-X Xu, 2020, Enhancement of gallium phase-change heat transfer by copper foam and ultrasonic vibration, J. Enhanc. Heat Transf., 27, 10.1615/JEnhHeatTransf.2019031176 Al Omari, 2021, Vibration-enhanced direct contact heat exchange using gallium as a solid phase change material, Int. Commun. Heat Mass Transf., 120, 10.1016/j.icheatmasstransfer.2020.104990 Zhou, 2018, Effect of percussion vibration on solidification of supercooled salt hydrate PCM in thermal storage unit, Renew. Energy., 126, 537, 10.1016/j.renene.2018.03.077 Joshy, 2020, Experimental investigation of the effect of vibration on phase change material (PCM) based battery thermal management system, J. Power Sources., 450, 10.1016/j.jpowsour.2020.227717 Zeng, 2021, Effect of inclination angle on melting process of phase change materials in a square cavity under mechanical vibration, J. Energy Storage., 36, 10.1016/j.est.2021.102392