Ultra-foldable integrated high-performance in-plane micro-supercapacitors from laser-induced selective metallization

Energy Storage Materials - Tập 51 - Trang 139-148 - 2022
Yi Xie1, Huiyuan Zhang2, Jihai Zhang1, Tao Zhou1
1State Key Laboratory of Polymer Materials Engineering of China, Polymer Research Institute, Sichuan University, Chengdu 610065, China
2Heibei Key Laboratory of Hazardous Chemicals Safety and Control Technology, School of Chemical and Environmental Engineering, North China Institute of Science and Technology, Langfang 065201, China

Tài liệu tham khảo

Guo, 2017, In-plane micro-supercapacitors for an integrated device on one piece of paper, Adv. Funct. Mater., 27, 10.1002/adfm.201702394 Zhu, 2017, A highly durable, transferable, and substrate-versatile high-performance all-polymer micro-supercapacitor with plug-and-play function, Adv. Mater., 29 Zhao, 2021, Flexible Transparent supercapacitors: materials and devices, Adv. Funct. Mater., 31 Dai, 2021, Polymer gel electrolytes for flexible supercapacitors: recent progress, challenges, and perspectives, Energy Storage Mater., 34, 320, 10.1016/j.ensm.2020.09.018 Zhang, 2020, Flexible in-plane micro-supercapacitors: progresses and challenges in fabrication and applications, Energy Storage Mater., 28, 160, 10.1016/j.ensm.2020.02.029 Zhang, 2018, Two-dimensional materials for miniaturized energy storage devices: from individual devices to smart integrated systems, Chem. Soc. Rev., 47, 7426, 10.1039/C8CS00561C He, 2019, Nano-sandwiched metal hexacyanoferrate/graphene hybrid thin films for in-plane asymmetric micro-supercapacitors with ultrahigh energy density, Mater. Horiz., 6, 1041, 10.1039/C9MH00063A He, 2019, Vacancy modification of Prussian-blue nano-thin films for high energy-density micro-supercapacitors with ultralow RC time constant, Nano Energy, 60, 8, 10.1016/j.nanoen.2019.03.042 Hu, 2015, Recent advances in designing and fabrication of planar micro-supercapacitors for on-chip energy storage, Energy Storage Mater., 1, 82, 10.1016/j.ensm.2015.08.005 Hota, 2019, Integration of electrochemical microsupercapacitors with thin film electronics for On-Chip energy storage, Adv. Mater., 31 Kyeremateng, 2017, Microsupercapacitors as miniaturized energy-storage components for on-chip electronics, Nat. Nanotechnol., 12, 7, 10.1038/nnano.2016.196 Zhang, 2020, Recent developments of planar micro-supercapacitors: fabrication, properties, and applications, Adv. Funct. Mater., 30 Qi, 2017, Design of architectures and materials in in-plane micro-supercapacitors: current status and future challenges, Adv. Mater., 29, 10.1002/adma.201602802 Jiang, 2019, On-chip MXene microsupercapacitors for AC-line filtering applications, Adv. Energy Mater., 9, 10.1002/aenm.201901061 Yun, 2017, A patterned graphene/ZnO UV sensor driven by integrated asymmetric micro-supercapacitors on a liquid metal patterned foldable paper, Adv. Funct. Mater., 27, 10.1002/adfm.201700135 Zhang, 2018, Paper with power: engraving 2D materials on 3D structures for printed, high-performance, binder-free, and all-solid-state supercapacitors, Adv. Funct. Mater., 28 Eustache, 2017, High areal energy 3D-interdigitated micro-supercapacitors in aqueous and ionic liquid electrolytes, Adv. Mater. Technol., 2, 10.1002/admt.201700126 Zhuang, 2016, Silicon-compatible carbon-based micro-supercapacitors, Angew. Chem. Int. Ed., 55, 6136, 10.1002/anie.201603040 Pech, 2010, Ultrahigh-power micrometre-sized supercapacitors based on onion-like carbon, Nat. Nanotechnol., 5, 651, 10.1038/nnano.2010.162 Kim, 2015, Air-stable, high-performance, flexible microsupercapacitor with patterned lonogel electrolyte, ACS Appl. Mater. Interfaces, 7, 4608, 10.1021/am5077843 Zhang, 2019, Additive-free MXene inks and direct printing of micro-supercapacitors, Nat. Commun., 10, 1795, 10.1038/s41467-019-09398-1 Huang, 2022, Ti3C2Tx MXene-based micro-supercapacitors with ultrahigh volumetric energy density for all-in-one si-electronics, ACS Nano, 16, 3776, 10.1021/acsnano.1c08172 Tagliaferri, 2021, Aqueous Inks of pristine graphene for 3D printed microsupercapacitors with high capacitance, ACS Nano, 15, 15342, 10.1021/acsnano.1c06535 Li, 2020, Recent development of printed micro-supercapacitors: printable materials, printing technologies, and perspectives, Adv. Mater., 32 Tetik, 2022, 3D printed MXene aerogels with truly 3d macrostructure and highly engineered microstructure for enhanced electrical and electrochemical performance, Adv. Mater., 34, 10.1002/adma.202104980 Li, 2019, Hydrous RuO2-Decorated MXene coordinating with silver nanowire inks enabling fully printed micro-supercapacitors with extraordinary volumetric performance, Adv. Energy Mater., 9 Yuan, 2022, Ultrafast shaped laser induced synthesis of MXene quantum dots/graphene for transparent supercapacitors, Adv. Mater., 34, 10.1002/adma.202110013 Zhang, 2021, Current advances and future perspectives of additive manufacturing for functional polymeric materials and devices, SusMat, 1, 127, 10.1002/sus2.11 Kurra, 2015, Microfabricated pseudocapacitors using Ni(OH)2 electrodes exhibit remarkable volumetric capacitance and energy density, Adv. Energy Mater., 5, 10.1002/aenm.201401303 Wang, 2022, Laser printing-based high-resolution metal patterns with customizable design and scalable fabrication of high-performance flexible planar micro energy storage devices, Chem. Eng. J., 429, 10.1016/j.cej.2021.132512 Xie, 2019, In situ growth of Cu(OH)2@FeOOH nanotube arrays on catalytically deposited Cu current collector patterns for high-performance flexible in-plane micro-sized energy storage devices, Energy Environ. Sci., 12, 194, 10.1039/C8EE01979G Chang, 2019, 3D structural strengthening urchin-like Cu(OH)2-based symmetric supercapacitors with adjustable capacitance, Adv. Funct. Mater., 29, 10.1002/adfm.201903588 Lin, 2014, Laser-induced porous graphene films from commercial polymers, Nat. Commun., 5, 5714, 10.1038/ncomms6714 Li, 2016, High-rate in-plane micro-supercapacitors scribed onto photo paper using in situ femtolaser-reduced graphene oxide/Au nanoparticle microelectrodes, Energy Environ. Sci., 9, 1458, 10.1039/C5EE03637B Li, 2016, High-performance pseudocapacitive microsupercapacitors from laser-induced graphene, Adv. Mater., 28, 838, 10.1002/adma.201503333 Gao, 2011, Direct laser writing of micro-supercapacitors on hydrated graphite oxide films, Nat. Nanotechnol., 6, 496, 10.1038/nnano.2011.110 El-Kady, 2013, Scalable fabrication of high-power graphene micro-supercapacitors for flexible and on-chip energy storage, Nat. Commun., 4, 1475, 10.1038/ncomms2446 Peng, 2015, Flexible boron-doped laser-induced graphene microsupercapacitors, ACS Nano, 9, 5868, 10.1021/acsnano.5b00436 Song, 2018, Flexible, stretchable, and transparent planar microsupercapacitors based on 3D porous laser-induced graphene, Small, 14, 10.1002/smll.201702249 Shi, 2019, One-step scalable fabrication of graphene-integrated micro-supercapacitors with remarkable flexibility and exceptional performance uniformity, Adv. Funct. Mater., 29, 10.1002/adfm.201902860 Khandelwal, 2022, Nitrogen and boron co-doped densified laser-induced graphene for supercapacitor applications, Chem. Eng. J., 428, 10.1016/j.cej.2021.131119 Liu, 2020, Laser-induced and KOH-activated 3D graphene: a flexible activated electrode fabricated via direct laser writing for in-plane micro-supercapacitors, Chem. Eng. J., 393, 10.1016/j.cej.2020.124672 El-Kady, 2012, Laser scribing of high-performance and flexible graphene-based electrochemical capacitors, Science, 335, 1326, 10.1126/science.1216744 Zhang, 2018, Lignin laser lithography: a direct-write method for fabricating 3D graphene electrodes for microsupercapacitors, Adv. Energy Mater., 8, 10.1002/aenm.201801840 Huang, 2018, 4-Butylbenzenesulfonate modified polypyrrole paper for supercapacitor with exceptional cycling stability, Energy Storage Mater., 12, 191, 10.1016/j.ensm.2017.12.016 Luo, 2019, Laser-Graving-Assisted Fabrication of Foldable Supercapacitors for On-Chip Energy Storage, ACS Appl. Mater. Interfaces, 11, 42172, 10.1021/acsami.9b14349 Ye, 2018, Direct laser writing of graphene made from chemical vapor deposition for flexible, integratable micro-supercapacitors with ultrahigh power output, Adv. Mater., 30, 10.1002/adma.201801384 Zhang, 2019, Laser-induced selective metallization on polymer substrates using organocopper for portable electronics, ACS Appl. Mater. Interfaces, 11, 13714, 10.1021/acsami.9b01856 Zhang, 2016, Fabricating metallic circuit patterns on polymer substrates through laser and selective metallization, ACS Appl. Mater. Interfaces, 8, 33999, 10.1021/acsami.6b11305 Xie, 2022, Laser-assisted mask-free patterning strategy for high-performance hybrid micro-supercapacitors with 3D current collectors, Chem. Eng. J., 437, 10.1016/j.cej.2022.135493 Huang, 2015, Super-high rate stretchable polypyrrole-based supercapacitors with excellent cycling stability, Nano Energy, 11, 518, 10.1016/j.nanoen.2014.10.031 Tang, 2022, 2-Methylimidazole assisted synthesis of nanocrystalline shell reinforced PPy hydrogel with high mechanical and electrochemical performance, Chem. Eng. J., 430, 10.1016/j.cej.2021.133033 Tian, 2019, General interfacial self-assembly engineering for patterning two-dimensional polymers with cylindrical mesopores on graphene, Angew. Chem. Int. Ed., 58, 10173, 10.1002/anie.201903684 Jiao, 2018, Facile and large-area preparation of polypyrrole film for low-haze transparent supercapacitors, ACS Appl. Mater. Interfaces, 10, 41299, 10.1021/acsami.8b13503 Kong, 2020, The fabrication of bowl-shaped polypyrrole/graphene nanostructural electrodes and its application in all-solid-state supercapacitor devices, J. Power Sources, 470, 10.1016/j.jpowsour.2020.228452 Li, 2019, High-performance all-solid-state supercapacitor derived from PPy coated carbonized silk fabric, Appl. Surf. Sci., 473, 967, 10.1016/j.apsusc.2018.12.244 Sun, 2016, High-performance stretchable yarn supercapacitor based on PPy@CNTs@urethane elastic fiber core spun yarn, Nano Energy, 27, 230, 10.1016/j.nanoen.2016.07.008 Teng, 2020, Hierarchically interconnected conducting polymer hybrid fiber with high specific capacitance for flexible fiber-shaped supercapacitor, Chem. Eng. J., 390, 10.1016/j.cej.2020.124569 Sheng, 2019, Polypyrrole@TEMPO-oxidized bacterial cellulose/reduced graphene oxide macrofibers for flexible all-solid-state supercapacitors, Chem. Eng. J., 368, 1022, 10.1016/j.cej.2019.02.173 Zhou, 2015, Polypyrrole doped with dodecyl benzene sulfonate electrodeposited on carbon fibers for flexible capacitors with high-performance, Electrochim. Acta, 176, 594, 10.1016/j.electacta.2015.07.026 Yuan, 2016, Flexible electrochemical capacitors based on polypyrrole/carbon fibers via chemical polymerization of pyrrole vapor, Appl. Surf. Sci., 377, 274, 10.1016/j.apsusc.2016.03.114 Xu, 2015, High performance carbon nanotube based fiber-shaped supercapacitors using redox additives of polypyrrole and hydroquinone, J. Mater. Chem. A, 3, 22353, 10.1039/C5TA06165B Wang, 2017, Highly stretchable and self-healable supercapacitor with reduced graphene oxide based fiber springs, ACS Nano, 11, 2066, 10.1021/acsnano.6b08262 Li, 2022, On-chip batteries for dust-sized computers, Adv. Energy Mater., 12 Zhu, 2021, Tiny robots and sensors need tiny batteries – here's how to do it, Nature, 589, 195, 10.1038/d41586-021-00021-2 Qu, 2020, Towards high-performance microscale batteries: configurations and optimization of electrode materials by in-situ analytical platforms, Energy Storage Mater., 29, 17, 10.1016/j.ensm.2020.03.025