Two-level model of the grain boundary diffusion under electron beam action

Kaur, 1995 Yang, 1988, Discontinuous precipitation and coarsening in Al-Zn alloys, Acta Metallurgica, 36, 1511, 10.1016/0001-6160(88)90218-0 King, 1987, Diffusion induced grain boundary migration, Int. Mater Rev., 32, 173, 10.1179/095066087790150304 Suryanarayana, 2001, Consolidation of mechanically alloyed Cu-In-Ga-Se powders, J. Mater. Sci. Lett., 20, 2179, 10.1023/A:1017916530073 Trattles, 1994, Computer simulation of electromigration in thin-film metal conductors, J. Appl. Phys., 75, 7799, 10.1063/1.356586 Ghiti, 1997, The effects of grain boundary diffusion anisotropy on via electromigration failure, J. Appl. Phys., 81, 3064, 10.1063/1.364341 Krupp, 2004, Oxygen-induced intergranular cracking of ani-base alloy at elevated temperatures – An example of dynamic embrittlement, Mat. Res., 7, 35, 10.1590/S1516-14392004000100006 R.L. Coble, A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials, Journal of Applied Physics; Mechanical Behavior of Materials. Thomas H. Courtney. Waveland Pr Inc. – 2005. Suryanarayana, 2000, Nanocrystalline materials – current research and future directions, Hyperfine Interact., 130, 5, 10.1023/A:1011026900989 Fisher, 1951, Calculation of diffusion penetration curves for surface and grain boundary diffusion, J. Appl. Phys., 22, 74, 10.1063/1.1699825 R.T.P. Whipple CXXXVIII. Concentration contours in grain boundary diffusion, The London, Edinburgh, and Dublin Philos. Magaz. J. Sci. 45 1954 1225 1236 10.1080/14786441208561131. Levine, 1960, Grain boundary and lattice diffusion in polycrystalline bodies, J. Appl. Phys., 31, 595, 10.1063/1.1735634 Suzuoka, 1964, Exact solutions of two ideal cases in grain boundary diffusion problem and the application to sectioning method, J. Phys. Soc. Jpn., 19, 839, 10.1143/JPSJ.19.839 Kakurin, 2013, Methods of determining the grain boundary diffusion coefficient impurities in metals on the basis of numerical solutions for the Fisher model, Eng. J. Don, 3, 1 Kondratev, 1992, Intergranular diffusion in real polycrystals, Physica Status Solidi (b), 171, 303, 10.1002/pssb.2221710203 Mishin, 1991, A generalized model of grain boundary diffusion, Philos. Magazine A, 64, 1239, 10.1080/01418619108225346 Beke, 2008, Generalization of fisher model for periodically non-uniform grain boundary, Defect Diffusion Forum, 277, 213 Klinger, 1999, Beyond the fisher model of grain boundary diffusion: Effect of structural inhomogeneity in the bulk, Acta Materialia, 47, 725, 10.1016/S1359-6454(98)00420-0 Popov, 2008, Analysis of possibilities of Fisher’s model development, Solid State Phenomena, 138, 133, 10.4028/www.scientific.net/SSP.138.133 Klinger, 1996, A model of accelerated diffusion along triple junction of grain boundaries, Mater. Sci. Forum, 207–209, 501, 10.4028/www.scientific.net/MSF.207-209.501 Aleshin, 2009, Diffusion in an ensemble of intersecting grain boundaries forming a triple junction, Russian Metallurgy (Metally), 5, 394, 10.1134/S003602950905005X Jaseliunaite, 2020, Kinetic modeling of grain boundary diffusion: The influence of grain size and surface processes, Materials, 13, 1, 10.3390/ma13051051 Gryaznov, 2008, Finite element simulation of diffusion into polycrystalline materials, Solid State Sci., 10, 754, 10.1016/j.solidstatesciences.2008.03.030 Hamm, 2017, FEM simulation supported evaluation of a hydrogen grain boundary diffusion coefficient in MgH2, Int. J. Hydrogen Energy, 42, 22530, 10.1016/j.ijhydene.2017.05.050 Lacaille, 2014, Finite element analysis of the grain size effect on diffusion in polycrystalline materials, Comput. Mater. Sci., 95, 187, 10.1016/j.commatsci.2014.07.026 Chepak-Gizbrekht, 2020, Grain-boundary diffusion modeling in a microstructural material, Comput. Mater. Sci., 184, 10.1016/j.commatsci.2020.109896 Ogurtani, 2005, Irreversible thermodynamics of triple junctions during the intergranular void motion under the electromigration forces, Int. J. Solids Struct., 42, 3918, 10.1016/j.ijsolstr.2004.11.013 Hart, 1957, On the role of dislocations in bulk diffusion, Acta Metallogr., 5, 597, 10.1016/0001-6160(57)90127-X S.V. Divinski F. Hisker Y.-S. Kang J.-S. Lee Chr. Herzig, 59Fe Grain Boundary Diffusion in Nanostructured γ-Fe-Ni Z. Metallkd. 93 2002 265 272 10.3139/146.020265. Belova, 2004, Analysis of the effective diffusivity in nanocrystalline materials, J. Metastable Nanocrystalline Mater., 19, 25, 10.4028/www.scientific.net/JMNM.19.25 German, 1989, Particle Packing Characteristics, Metal Powder Industries Federation Kalnina, 2002, Calculations of the effective diffusion coefficient for inhomogeneous media, J. Phys. Chem. Solids, 63, 449, 10.1016/S0022-3697(01)00159-7 A.G. Knyazeva M.A. Anisimova I. Sevostianov Connection between diffusion coefficient and thermal conductivity of a metal matrix composite, IOP Conf. Series Materials Science and Engineering 012051 175 (2017). doi:10.1088/1757-899X/175/1/012051. Chepak-Gizbrekht, 2015, The influence of grain form on effective diffusion coefficient of polycrystalline, Appl. Mech. Mater., 756, 529, 10.4028/www.scientific.net/AMM.756.529 Knyazeva, 2015, On the micromechanical modelling of the effective diffusion coefficient of a polycrystalline material, Philos. Magazine, 95, 2046, 10.1080/14786435.2015.1046965 Stark, 1977, Solid-state diffusion, Phys. Today, 30, 53, 10.1063/1.3037670 Hai, 2020, Stress induced by diffusion and local chemical reactionin spherical composition-gradient electrodes, Acta Mech., 231, 2669, 10.1007/s00707-020-02652-4 Magri, 2020, A coupled model of diffusional creep of polycrystalline solids based on climb of dislocations at grain boundaries, J. Mech. Phys. Solids, 135, 10.1016/j.jmps.2019.103786 Benabou, 2019, Coupled stress-diffusion modelling of grain boundary segregation and dynamic embrittlement in a copper alloy, Model. Simul. Mater. Sci. Eng., 27, 1, 10.1088/1361-651X/ab1624 Ostrovsky, 1998, Models of boundary diffusion of grains in thin films in stress fields in various kinetic regimes, Mater. Sci. Forum, 294–296, 553, 10.4028/www.scientific.net/MSF.294-296.553 Mikolaichuk, 2010, Effect of stresses and strains on impurity redistribution in a plate under uniaxial loading, J. Appl. Mech. Tech. Phys., 51, 422, 10.1007/s10808-010-0057-3 Knyazeva, 2011, Saturation of a plate with an environmental impurity under mechanical loading conditions, Mech. Solids, 46, 692, 10.3103/S0025654411050050 Mikolaychuk, 2012, Model of impurity diffusion in structurally inhomogeneous deformable medium (In Russian), Izvestiya Vuzov. Phys., 5, 74 Christopher, 2003, Analysis of grain boundary networks and their evolution during grain boundary engineering, Acta Materialia, 5, 687 Knyazeva, 2015, The theory of reactive diffusion for the description of oxide phase growth in a coating, AIP Conf. Proc., 1683, 1 Maslov, 2018, The grain boundary diffusion of silicon in nickel titanium under external energy deposition, AIP Conf. Proc., 2051, 1 V.O. Semin E.Y. Gudimova A.A. Neiman F.A. D’yachenko, R.R. Mukhamedova, S.Y. Timoshevskaya, L.L. Meisner, Nano-devitrification and structural evolution of amorphous state in surface Ti-Ta-based alloy fabricated on TiNi substrate through additive thin-film electron-beam synthesis Materialia 100814 2020 10.1016/j.mtla.2020.100814. Meisner, 2018, Microstructural characterization of Ti-Ta-based surface alloy fabricated on TiNi SMA by additive pulsed electron-beam melting of film/substrate system, J. Alloys Compounds, 730, 376, 10.1016/j.jallcom.2017.09.238 Grigoriev, 1996 Mehrer, 2007 Larikov, 1987 Yanenko, 1971, The method of fractional steps (The solution of problems of mathematical physics in several variables), Springer-Verl. Berlin etc. Samarskii, 1989, Volume I Conte, 1972 Demidov, 2019, Multistage kinetics of the synthesis Of Ti–TixCy composite, Nanosci. Technol.: Int. J., 10, 195 S.G. Psakh’e, A.I. Lotkov, S.N. Meisner, L.L. Meisner, V.P. Sergeev, A.R. Sungatulin, Effect of surface modification by silicon ion beam on microstructure and chemical composition of near-surface layers of titanium nickelide Inorg. Mater. Appl. Res. 4 2013 457 463 10.1134/S2075113313050134. Meisner, 2004, Mechanical and physical-chemical behavior of TiNi-based alloys with thin surface layers modified by ion and electron irradiation, Fizicheskaya mezomekhanika, No 7 (2), 169 Shackelford, 2000