True-triaxial experimental study on the brittle failure of granite conditioned by the TBM disc cutter

Martin, 1999, Hoek-Brown parameters for predicting the depth of brittle failure around tunnels, Can Geotech J, 36, 136, 10.1139/t98-072 Du, 2016, Experimental study of slabbing and rockburst induced by true-triaxial unloading and local dynamic disturbance, Rock Mech Rock Eng, 49, 3437, 10.1007/s00603-016-0990-4 Gong, 2018, Experimental simulation investigation on rockburst induced by spalling failure in deep circular tunnels, Tunn Undergr Space Technol, 81, 413, 10.1016/j.tust.2018.07.035 Gill, 1993, A practical engineering approach to the evaluation of rockburst potential, 63 Tang, 2000 Cook, 1963, The basic mechanics of rockbursts, Journal of the Southern African Institute of Mining and Metallurgy, 64, 71 Kidybiński, 1981, Bursting liability indices of coal, Int J Rock Mech Min Sci Geomech Abstracts, 18, 295, 10.1016/0148-9062(81)91194-3 Singh, 1987, The influence of rock properties on the occurrence and control of rockbursts, Min Sci Technol, 5, 11, 10.1016/S0167-9031(87)90854-1 Singh, 1989, Classification of mine workings according to their rockburst proneness, Min Sci Technol, 8, 253, 10.1016/S0167-9031(89)90404-0 Wang, 2001, Comprehensive prediction of rockburst based on analysis of strain energy in rocks, Tunn Undergr Space Technol, 16, 49, 10.1016/S0886-7798(01)00030-X Li, 2004, Experimental study of dynamic response and failure behavior of rock under coupled static-dynamic loading Bagde, 2005, Fatigue properties of intact sandstone samples subjected to dynamic uniaxial cyclical loading, Int J Rock Mech Min Sci, 42, 237, 10.1016/j.ijrmms.2004.08.008 Cho, 2005, A method for estimating the strength properties of a granitic rock subjected to dynamic loading, Int J Rock Mech Min Sci, 4, 561, 10.1016/j.ijrmms.2005.01.004 Jiang, 2015, Observation of rock fragment ejection in post-failure response, Int J Rock Mech Min Sci, 74, 30, 10.1016/j.ijrmms.2014.11.007 He, 2007, Experimental study on rockburst processes of granite specimen at great depth, Chin J Rock Mech Eng, 26, 865 He, 2010, Rock burst process of limestone and its acoustic emission characteristics under true-triaxial unloading conditions, Int J Rock Mech Min Sci, 47, 286, 10.1016/j.ijrmms.2009.09.003 He, 2012, Experimental investigation of bedding plane orientation on the rockburst behavior of sandstone, Rock Mech Rock Eng, 45, 311, 10.1007/s00603-011-0213-y Gong, 2012, Rock burst and slabbing failure and its influence on TBM excavation at headrace tunnels in Jinping II hydropower station, Eng Geol, 124, 98, 10.1016/j.enggeo.2011.10.007 Zhao, 2015, Influence of specimen height-to-width ratio on the strainburst characteristics of Tianhu granite under true-triaxial unloading conditions, Can Geotech J, 52, 890, 10.1139/cgj-2014-0355 Gong, 2015, Fracture angle analysis of rock burst faulting planes based on true-triaxial experiment, Rock Mech Rock Eng, 48, 1017, 10.1007/s00603-014-0639-0 Su, 2017, Influence of tunnel axis stress on strainburst: an experimental study, Rock Mech Rock Eng, 50, 1551, 10.1007/s00603-017-1181-7 Lockner, 1993, The role of acoustic emission in the study of rock fracture, Int J Rock Mech Min Sci Geomech Abstracts, 30, 883, 10.1016/0148-9062(93)90041-B Lei, 2000, Quasi‐static fault growth and cracking in homogeneous brittle rock under triaxial compression using acoustic emission monitoring, J Geophys Res Solid Earth, 105, 6127, 10.1029/1999JB900385 Thompson, 2006, Fracture in Westerly granite under AE feedback and constant strain rate loading: nucleation, quasi-static propagation, and the transition to unstable fracture propagation, Pure Appl Geophys, 163, 995, 10.1007/s00024-006-0054-x Ishida, 2017, ISRM suggested method for laboratory acoustic emission monitoring, Rock Mech Rock Eng, 50, 665, 10.1007/s00603-016-1165-z McLaskey, 2018, Shear failure of a granite pin traversing a sawcut fault, Int J Rock Mech Min Sci, 110, 97, 10.1016/j.ijrmms.2018.07.001 Martin, 1994, The progressive fracture of Lac du Bonnet granite, Int J Rock Mech Min Sci Geomech Abstracts, 31, 643, 10.1016/0148-9062(94)90005-1 Eberhardt, 1999, Quantifying progressive pre-peak brittle fracture damage in rock during uniaxial compression, Int J Rock Mech Min Sci, 36, 361, 10.1016/S0148-9062(99)00019-4 King, 2012, Acoustic emissions associated with the formation of fracture sets in sandstone under polyaxial stress conditions, Geophys Prospect, 60, 93, 10.1111/j.1365-2478.2011.00959.x Zhao, 2013, Damage stress and acoustic emission characteristics of the Beishan granite, Int J Rock Mech Min Sci, 258, 10.1016/j.ijrmms.2013.09.003 Moradian, 2016, Detection of cracking levels in brittle rocks by parametric analysis of the acoustic emission signals, Rock Mech Rock Eng, 49, 785, 10.1007/s00603-015-0775-1 Ohno, 2010, Crack classification in concrete based on acoustic emission, Construct Build Mater, 24, 2339, 10.1016/j.conbuildmat.2010.05.004 Aggelis, 2011, Acoustic emission characterization of the fracture process in fibre reinforced concrete, Construct Build Mater, 25, 4126, 10.1016/j.conbuildmat.2011.04.049 Siracusano, 2016, A framework for the damage evaluation of acoustic emission signals through Hilbert–Huang transform, Mech Syst Signal Process, 75, 109, 10.1016/j.ymssp.2015.12.004 Zhao, 2014, Influence of unloading rate on the strainburst characteristics of Beishan granite under true-triaxial unloading conditions, Rock Mech Rock Eng, 47, 467, 10.1007/s00603-013-0443-2 Huang, 2014, Conversion of strain energy in triaxial unloading tests on marble, Int J Rock Mech Min Sci, 66, 160, 10.1016/j.ijrmms.2013.12.001 He, 2015, A novel experimental technique to simulate pillar burst in laboratory, Rock Mech Rock Eng, 48, 1833, 10.1007/s00603-014-0687-5 Zhao, 2017, Size effects on granite behavior under unloading rockburst test, Bull Eng Geol Environ, 76, 1183, 10.1007/s10064-016-0903-5 Hu, 2019, Experiment on rockburst process of borehole and its acoustic emission characteristics, Rock Mech Rock Eng, 52, 783, 10.1007/s00603-018-1613-z Zhai, 2020, Fracture evolution during rockburst under true-triaxial loading using acoustic emission monitoring, Bull Eng Geol Environ, 79, 4957, 10.1007/s10064-020-01858-z Lu, 2013, Microseismic frequency-spectrum evolutionary rule of rockburst triggered by roof fall, Int J Rock Mech Min Sci, 64, 6, 10.1016/j.ijrmms.2013.08.022 Gong, 2017, Precursory waves and eigenfrequencies identified from acoustic emission data based on singular spectrum analysis and laboratory rock-burst experiments, Int J Rock Mech Min Sci, 91, 155, 10.1016/j.ijrmms.2016.11.020 Su, 2018, True-triaxial experimental study of the evolutionary features of the acoustic emissions and sounds of rockburst processes, Rock Mech Rock Eng, 51, 375, 10.1007/s00603-017-1344-6 Eberhardt, 2001, Numerical modelling of three-dimension stress rotation ahead of an advancing tunnel face, Int J Rock Mech Min Sci, 38, 499, 10.1016/S1365-1609(01)00017-X Kaiser, 2006, Rock mechanics consideration for construction of deep tunnel in brittle ground, vol. 12 Lu, 2021, Study on the tunneling response of TBM in stressed granite rock mass in Yinhan Water Conveyance tunnel, Tunn Undergr Space Technol, 118, 10.1016/j.tust.2021.104197 Yin, 2014, Study on rock mass boreability by TBM penetration test under different in situ stress conditions, Tunn Undergr Space Technol, 43, 413, 10.1016/j.tust.2014.06.002 Wilfing, 2016 Villeneuve, 2017, Hard rock tunnel boring machine penetration test as an indicator of chipping process efficiency, J Rock Mech Geotech Eng, 9, 611, 10.1016/j.jrmge.2016.12.008