Tribotechnical Properties of Composite Material “Aluminum–Carbon Nanofibers” under Friction on Steels 12Kh1 and ShKh15

Bakshi, S.R., et al., Carbon nanotube reinforced metal matrix composites, Int. Mater. Rev., 2010, vol. 55, no. 1, pp. 41–64.

Chen, X.H., Peng, J.C., Li, X.Q., Deng, F.M., Wang, J.X., and Li, W.Z., Tribological behavior of carbon nanotubes— reinforced nickel matrix composite coatings, J. Mater. Sci. Lett., 2001, vol. 20, pp. 2057–2060.

Deng, F.M., Chen, X.H., Chen, W.X., and Li, W.Z., Electroless plating Ni–P matrix composite coating reinforced by carbon nanotubes, Trans. Nonferrous Met. Soc. Chin., 2004, vol. 14, no. 4, pp. 681–685.

Larionova, T., Koltsova, T., Fadin, Y., and Tolochko, O., Friction and wear of copper–carbon nanofibers compact composites prepared by chemical vapor deposition, Wear, 2014, vol. 319, pp. 118–122.

Kim, I.Y., Lee, J.H., Lee, G.S., Baik, S.H., Kim, Y.J., and Lee, Y.Z., Friction and wear characteristics of the carbon nanotube–aluminum composites with different manufacturing conditions, Wear, 2009, vol. 267, pp. 593–598.

Rudskoy, A.I., Tolochko, O.V., Koltsova, T.S., and Nasibulin, A.G., Synthesis of carbon nanofibers on the surface of particles of aluminum powder, Met. Sci. Heat Treat., 2014, vol. 55, no. 9, pp. 564–568.

Skvortsova, A.N., Lycheva, K.A., Voznyakovskii, A.A., and Kol’tsova, T.S., Aluminum-based composite materials reinforced with carbon nanofibres, Nauchno-Tekh. Ved. S.-Peterb. Gos. Politekh. Univ., 2015, no. 3 (226), pp. 78–82.

Rudskoy, A.I., Koltsova, T.S., Shakhov, F.M., Tolochko, O.V., and Mikhailov, V.G., Effect of hot pressing modes on the structure and properties of an ‘aluminum–carbon nanofibers’ composite material, Met. Sci. Heat Treat., 2015, vol. 56, no. 9, pp. 525–530.

Gvozdev, A.E., Starikov, N.E., Zolotukhin, V.I., Sergeev, N.N., Sergeev, A.N., and Breki, A.D., Tekhnologiya konstruktsionnykh i ekspluotatisonnykh materialov (Technology of Constructional and Operational Materials), Tula: Tul’sk. Gos. Univ., 2016.

Breki, A.D., Gvozdev, A.E., Kolmakov, A.G., Starikov, N.E., Provotorov, D.A., Sergeyev, N.N., and Khonelidze, D.M., On friction of metallic materials with consideration for superplasticity phenomenon, Inorg. Mater.: Appl. Res., 2017, vol. 8, no. 1, pp. 126–129.

Gvozdev, A.E., Zhuravlev, G.M., Kolmakov, A.G., Provotorov, D.A., and Sergeev, N.N., Calculation of deformation damageability during reverse extrusion of metal products, Tekhnol. Met., 2016, no. 1, pp. 23–32.

Shorshorov, M.Kh., Gvozdev, A.E., Zolotukhin, V.I., et al., Razrabotka progressivnykh tekhnologii polucheniya i obrabotki metallov, splavov, poroshkovykh i kompozitsionnykh nanomaterialov (Development of Advanced Technologies of Production and Processing of Metals, Alloys, Powder and Composite Materials), Tula: Tul’sk. Gos. Univ., 2016.

Gulevskii, V.A., Terziman, O.V., Antipov, V.I., Vinogradov, L.V., Kidalov, N.A., and Kolmakov, A.G., Interaction of components in a composite material from a porous carbon-graphite case filled with silumin, Perspekt. Mater., 2016, no. 2, pp. 57–63.

Breki, A.D., Didenko, A.L., Kudryavtsev, V.V., Vasileva, E.S., Tolochko, O.V., Kolmakov, A.G., Fadin, Yu.A., Sergeyev, N.N., Gvosdev, A.E., Starikov, N.E., and Provotorov, D.A., Synthesis and tribotechnical properties of composite coatings with PM–DADPE polyimide matrix and fillers of tungsten dichalcogenide nanoparticles upon dry sliding friction, Inorg. Mater.: Appl. Res., 2016, vol. 7, no. 4, pp. 542–546.

Vityaz’, P.A., Senyut’, V.T., Kheifets, M.L., Sobol’, S.F., and Kolmakov, A.G., Synthesis of composite nanostructured materials based on aluminum alloys, Naukoemkie Tekhnol. Mashinostr., 2016, no. 8 (62), pp. 3–11.

Breki, A.D., Didenko, A.L., Kudryavtsev, V.V., Vasilyeva, E.S., Tolochko, O.V., Gvozdev, A.E., Sergeyev, N.N., Provotorov, D.A., Starikov, N.E., Fadin, Yu.A., and Kolmakov, A.G., Composite coatings based on A–OOO polyimide and WS2 nanoparticles with enhanced dry sliding characteristics, Inorg. Mater.: Appl. Res., 2017, vol. 8, no. 1, pp. 56–59.