Tribology and total hip joint replacement: Current concepts in mechanical simulation
Tóm tắt
Từ khóa
Tài liệu tham khảo
Bhushan, 1999, Definition and history of tribology
Petterson, 2007, High-performance base fluid for environmentally adapted lubricants, Tribol Int, 40, 638, 10.1016/j.triboint.2005.11.016
Oxford, D. Tribology; 2008, http://www.askoxford.com/concise_oed/tribology?view=uk.
Batchelor, 1995, Tribology in materials processing, J Mater Process Technol, 48, 503, 10.1016/0924-0136(94)01689-X
Cole, 1995, Lightweight materials for automotive applications, Mater Character, 35, 3, 10.1016/1044-5803(95)00063-1
Katz, 2006, Self-lubricating coatings containing fullerene-like WS2 nanoparticles for orthodontic wires and other possible medical applications, Tribol Lett, 21, 135, 10.1007/s11249-006-9029-4
Taylor, 1999, Automobile engine tribology—design considerations for efficiency and durability, Wear, 221, 1, 10.1016/S0043-1648(98)00253-1
Tichy, 2000, Review of solid mechanics in tribology, Int J Solids Struct, 37, 391, 10.1016/S0020-7683(99)00101-8
Dowson, 1998
Davidson, 1957, Bearings since the stone age, Engineering, 183, 2
Bhushan, 2002
Archard, 1980, Wear theory and mechanism, 35
Thompson, 1999, Environmentally-sensitive design: Leonardo WAS right!, Materials and Design, 20, 23, 10.1016/S0261-3069(98)00046-6
Lenard, 2007, Flat Rolling — A General Discussion, Primer on Flat Rolling, 17, 10.1016/B978-008045319-4/50004-8
Gao, 2004, Amontons’ Law: From the Molecular to the Macroscopic Scale, J Phys Chem B, 108, 3410, 10.1021/jp036362l
Dowson, 1998
Amontons, 1699, De la Résistance Causée e dans les Machines, Mémoires de l’Académie Royale, 257
Coulomb, 1785, The orie des Machines Simples, en ayant regard au Frottement de leurs Parties, et a la Roideur des Cordages, Mem Math Phys, X, 161
Dowson, 1998
Tower, 1884, First report on friction experiments, Proc. Inst. Mech. Eng., 34(a), 632
Reynolds, 1886, On the theory of lubrication and its application to Mr. Beauchamp Tower's experiments, Phil Trans R Soc Lond, 177, 157, 10.1098/rstl.1886.0005
Petroff, 1883, Friction in machines and the effects of the lubricant, Eng J, 71, 228
Bhushan, 2001
Stachowiak, 2002, Introduction
Holm, 1946, Electrical contacts
Tabor, 1969, The direct measurement of normal and retarded van der Waals forces, Proc R Soc Lond, A312, 435, 10.1098/rspa.1969.0169
Bhushan, 1992
Bhushan, 1996
Bhushan, 1997
NIH. Total hip replacement; 1994. http://consensus.nih.gov/1994/1994HipReplacement098html.htm.
Kurtz, 2005, Prevalence of primary and revision total hip and knee arthroplasty in the United States from 1990 through 2002, J Bone Jt Surg [Am], 87, 1487, 10.2106/JBJS.D.02441
Straffelini, 2000
Kurtz, 2007, Future Clinical and economic impact of revision total hip and knee, J Bone Jt Surg [Am], 89, 144, 10.2106/JBJS.G.00587
O’Connor, 2004, New insight into the mechanism of hip prosthesis loosening: effect of titanium debris size on osteoblast function, J Orthop Res, 22, 229, 10.1016/S0736-0266(03)00167-0
McGee, 2000, Implant retrieval studies of the wear and loosening of prosthetic joints: a review, Wear, 241, 158, 10.1016/S0043-1648(00)00370-7
Yan, 2007, Tribo-corrosion properties of cobalt-based medical implant alloys in simulated biological environments, Wear, 263, 1105, 10.1016/j.wear.2007.01.114
Brown, 2006, A review of lubricant conditions for wear simulation in artificial hip joint replacements, Tribol Trans, 49, 72, 10.1080/05698190500519223
McKellop, 1995, The origin of submicron polyethylene wear debris in total hip arthroplasty, Clin Orthop Relat Res, 311, 3
Czichos, 1995, Advances in tribology: the materials point of view, Wear, 190, 155, 10.1016/0043-1648(96)80014-7
Peterson, 1980, Clasification of wear process, 9
Schmalzried, 1999, Current concepts review—wear in total hip and knee replacements, J Bone Jt Surg [Am], 81, 115, 10.2106/00004623-199901000-00016
Jones, 1992, Polyethylene wear in uncemented knee replacements, J Bone Jt Surg [Br], 74-B1, 18, 10.1302/0301-620X.74B1.1732256
Lombardi, 1989, Aseptic loosening in total hip arthroplasty secondary to osteolysis induced by wear debris from titanium-alloy modular femoral heads, J Bone Jt Surg [Am], 71-A, 1337, 10.2106/00004623-198971090-00009
Black, 1978, The future of polyethylene, J Bone Jt Surg [Br], 60-B3, 303, 10.1302/0301-620X.60B3.681402
Callaghan, 1995, Radiographic measurement of wear in 5 cohorts of patients observed for 5 to 22 years, Clin Orthop Relat Res, 317, 14
Peterson, 1980, Classification of wear process, 9
Wright, 1995
Bragdon, 1996, The importance of multidirectional motion on the wear of polyethylene, Proc Inst Mech Eng [H], 210, 157, 10.1243/PIME_PROC_1996_210_408_02
Wang, 1996, Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint replacement prostheses, Proc Inst Mech Eng [H], 210, 141, 10.1243/PIME_PROC_1996_210_407_02
ASTM F732-00, 2006
ASTM G133-95. Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear. Annual book of ASTM standards, vol. 03.02. West Conshohocken, PA: 2002, pp 558–565.
Dowson, 2001, New joints for the millennium: wear control in total replacements hip joints, Proc Inst Mech Eng [H], 215, 335, 10.1243/0954411011535939
Affatato, 2007, Larger diameter bearings reduce wear in metal-on-metal hip implants, Clin Orthop Relat Res, 456, 153, 10.1097/01.blo.0000246561.73338.68
Barbour, 2000, A hip joint simulator study using new and physiologically scratched femoral heads with ultra-high molecular weight polyethylene acetabular cups, Proc Inst Mech Eng [H], 214, 569, 10.1243/0954411001535598
Clarke, 2001, Multi-laboratory simulator studies on effects of serum proteins on PTFE cup wear, Wear, 250, 188, 10.1016/S0043-1648(01)00656-1
Goldsmith, 2000, A comparative joint simulator study of the wear of metal-on-metal and alternative material combinations in hip replacements, Proc Inst Mech Eng [H], 214, 39, 10.1243/0954411001535228
Saikko, 2005, A 12-station anatomic hip joint simulator, Proc Inst Mech Eng [H], 219, 437, 10.1243/095441105X34419
ASTM-WK451, 2008
Dumbleton, 1981, The evaluation of prostheses on joint simulators, 258
Ahmed, 1983, In-vitro measurement of static pressure distribution in synovial joints—Part II: retropatellar surface, J. Biomech. Eng. Trans. ASME, 105, 226, 10.1115/1.3138410
Clarke, 1981, Wear of artificial joint materials IV, Eng Med, 10, 189, 10.1243/EMED_JOUR_1981_010_052_02
Hsu, 2001
Brockett, 2007, Friction of total hip replacements with different bearings and loading conditions, J Biomed Mater Res Part B: Appl Biomater, 81B, 508, 10.1002/jbm.b.30691
Barbour, 1999, A hip joint simulator study using simplified loading and motion cycles generatine physiological wear paths and rates, Proc Inst Mech Eng [H], 213, 455, 10.1243/0954411991535068
Lu, 1997, Frictional heating of bearing materials tested in a hip joint wear simulator, Proc Inst Mech Eng [H], 211, 101, 10.1243/0954411971534728
Goldsmith, 1999, Development of a ten-station, multi-axis hip joint simulator, Proc Inst Mech Eng [H], 213, 311, 10.1243/0954411991535149
Lu, 1999, Potential thermal artifacts in hip joint wear simulators, J Biomed Mater Res, 48, 458, 10.1002/(SICI)1097-4636(1999)48:4<458::AID-JBM9>3.0.CO;2-B
Beutler, 1975, Wear behaviour of medical engineering materials, Wear, 33, 337, 10.1016/0043-1648(75)90287-2
Saikko, 2002, Slide track analysis of the relative motion between femoral head and acetabular cup in walking and in hip simulators, J Biomech, 35, 455, 10.1016/S0021-9290(01)00224-X
Saikko, 1996, A three-axis hip joint simulator for wear and friction studies on total hip prostheses, Proc Inst Mech Eng [H], 210, 175, 10.1243/PIME_PROC_1996_210_410_02
Dowson, 1988, Design and development of a versatile hip joint simulator and a preliminary assessment of wear and creep in Charnley total replacement hip joints, Eng Med, 17, 111, 10.1243/EMED_JOUR_1988_017_031_02
ISO-14242/1. Implants for surgery––Wear of total hip joint prostheses––Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for tests; 2002.
Viceconti, 1996, Discussion on the design of a hip joint simulator, Med Eng Phys, 18, 234, 10.1016/1350-4533(95)00026-7
Schwenke, 2006, Load profile, fluid composition influence the soak behaviour of UHMWPE implants, J ASTM Int, 3, 5, 10.1520/JAI100255
Saikko, 1999, Type of motion and lubricant in wear simulation of polyethylene acetabular cup, Proc Inst Mech Eng [H], 213, 301, 10.1243/0954411991535130
Paul, 1966, Forces transmitted by joints in the human body. Lubrication and wear in living and artificial human joints, Proc Inst Mech Eng, 3J, 181
ASTM-F1714, 2008
ISO-14242/2. Implants for surgery—Wear of total hip joint prostheses. Part 2: Method of measurement; 2000.
Saikko, 2003, Effect of lubricant protein concentration on the wear of ultra-high molecular weight polyethylene sliding against a CoCr counterface, Trans ASME, 125, 638, 10.1115/1.1537751
Wang, 2004, The effects of lubricant composition on in vitro wear testing of polymeric acetabular components, J Biomed Mater Res B Appl Biomater, 68, 45, 10.1002/jbm.b.10077
Heubergera, 2005, Protein-mediated boundary lubrication in arthroplasty, Biomaterials, 26, 1165, 10.1016/j.biomaterials.2004.05.020
Calonius, 2002, Analysis of polyethylene particles produced in different wear conditions in vitro, Clin Orthop Relat Res, 399, 219, 10.1097/00003086-200206000-00027
ISO/TR-9325. Implants for surgery—Partial and total hip joint prostheses. Recommendations for simulators for evaluation of hip joint prostheses; 1989.
ISO-6474. Implants for surgery—Ceramic materials based on high purity alumina; 1994.
McKellop, 1996, In vivo wear of three types of metal on metal hip prostheses during two decades of use, Clin Orthop Relat Res, 329, S128, 10.1097/00003086-199608001-00013
Wroblewski, 1996, Prospective clinical and joint simulator studies of a new total hip arthroplasty using alumina ceramic heads and cross-linked polyethylene cups, J Bone Joint Surg Br, 78, 280, 10.1302/0301-620X.78B2.0780280
Silva, 2005, Metal-on-metal total hip replacement, Clin Orthop Relat Res, 430, 53, 10.1097/01.blo.0000149995.84350.d7
Kothari, 1996, Surface geometry of retrieved McKee-Farrar total hip replacements, Clin Orthop Relat Res, 329, S141, 10.1097/00003086-199608001-00014
Schmidt, 1996, Cobalt chromium molybdenum metal combination for modular hip prostheses, Clin Orthop Relat Res, 329, S35, 10.1097/00003086-199608001-00004
Willert, 1996, Wear behavior and histopathology of classic cemented metal on metal hip endoprostheses, Clin Orthop Relat Res, 329, S160, 10.1097/00003086-199608001-00016
Clarke, 2000, Clinical and hip simulator comparisons of ceramic-on-polyethylene and metal-on-polyethylene wear, Clin Orthop Relat Res, 379, 34, 10.1097/00003086-200010000-00006
Schüller, 1990, Ten-year socket wear in 66 hip arthroplasties. Ceramic versus metal heads, Acta Orthop Scand, 61, 240, 10.3109/17453679008993508
Zichner, 1992, Comparison of alumina-polyethylene and metal-polyethylene in clinical trials, Clin Orthop Relat Res, 282, 86, 10.1097/00003086-199209000-00011
Wroblewski, 1999, Low-friction arthroplasty of the hip using alumina ceramic and cross-linked polyethylene. A ten-year follow-up report, J Bone Jt Surg Br, 81, 54, 10.1302/0301-620X.81B1.8822
Skinner, 1999, Ceramic bearing surfaces, Clin Orthop Relat Res, 369, 83, 10.1097/00003086-199912000-00009
Boehler, 1994, Long-term results of uncemented alumina acetabular implants, J Bone Jt Surg Br, 76, 53, 10.1302/0301-620X.76B1.8300682
Saikko, 2001, Effect of counterface roughness on the wear of conventional and crosslinked ultrahigh molecular weight polyethylene studied with a multi-directional motion pin-on-disk device, J Biomed Mater Res, 57, 506, 10.1002/1097-4636(20011215)57:4<506::AID-JBM1196>3.0.CO;2-H
Essner, 2005, The clinical relevance of hip joint simulator testing: In vitro and in vivo comparisons, Wear, 259, 882, 10.1016/j.wear.2005.02.105
Garellick, 2000, Survival of total hip replacements: A comparison of a randomized trial and a registry, Clin Orthop, 375, 157, 10.1097/00003086-200006000-00019
Stea, 2007, First hip arthroplasty register in Italy: 55000 cases and 7 year follow-up, Int Orthop
Servizio Sanitario Regionale, E.-R. R.I.P.O.2007, https://ripo.cineca.it/.
Semlitsch, 1977, New prospects for a prolonged functional life-span of artificial hip joints by using the material combination polyethylene/aluminium oxide ceramin/metal, J Biomed Mater Res, 11, 537, 10.1002/jbm.820110409
Linn, 1967, Lubrication of animal joints I. The arthrotripsometer, J Bone Joint Surg Am, 49, 1079, 10.2106/00004623-196749060-00005
Rose, 1980, On the true wear rate of ultra high-molecular-weight polyethylene in the total hip prosthesis, J Bone Joint Surg Am, 62, 537, 10.2106/00004623-198062040-00007
Simon, 1975, “Stiction-friction” of total hip prostheses and its relationship to loosening, J Bone Joint Surg Am, 57, 226, 10.2106/00004623-197557020-00016
Weightman, 1973, A comparative study of total hip replacement prostheses, J Biomech, 6, 299, 10.1016/0021-9290(73)90052-3
Duff-Barclay, 1967, Total human hip joint prostheses—a laboratory study of friction and wear, Proc Inst Mech Eng, 181, 8
Scales, 1969, Friction torque studies of total joint replacements. The use of a simulator, Ann Rheum Dis, 28, 30
Scales, 1975, Experimental methods for the assessment of wear of materials potentially useful for endoprostheses, Acta Orthop Belg, 41, 160
Dowson, 1970, A joint simulating machine for load-bearing joints, Med Biol Eng, 8, 37, 10.1007/BF02551747
Walker, 1971, The tribology (friction, lubrication and wear) of all-metal artificial hip joints, Wear, 17, 285, 10.1016/0043-1648(71)90032-9
Saikko, 1992, A simulator study of friction in total replacement hip joints, Proc Inst Mech Eng [H], 206, 201, 10.1243/PIME_PROC_1992_206_292_02
Saikko, 1995, Wear of the polyethylene acetabular cup. The effect of head material, head diameter, and cup thickness studied with a hip simulator, Acta Orthop Scand, 66, 501, 10.3109/17453679509002302
Essner, 2005, Hip simulator wear comparison of metal-on-metal, ceramic-on-ceramic and crosslinked UHMWPE bearings, Wear, 259, 992, 10.1016/j.wear.2005.02.104
Wang, 1998, Effect of femoral head surface roughness on the wear of ultrahigh molecular weight polyethylene acetabular cups, J Arthroplasty, 13, 615, 10.1016/S0883-5403(98)80002-8
Affatato, 2005, Advanced nanocomposite materials for orthopaedic applications. I: A long-term in vitro wear study of zirconia-toughened alumina, J Biomed Mater Res B Appl Biomater
Oonishi, 2004, Alumina hip joints characterized by run-in wear and steady-state wear to 14 million cycles in hip-simulator model, J Biomed Mater Res A, 70, 523, 10.1002/jbm.a.30021
Affatato, 2000, An in vitro investigation of Diamond-Like Carbon as a femoral head coating, J Biomed Mater Res (Appl Biomater), 53, 221, 10.1002/(SICI)1097-4636(2000)53:3<221::AID-JBM6>3.0.CO;2-Z
Affatato, 2001, Mixed oxides prosthetic ceramic ball heads. Part 3: effect of the ZrO2 fraction on the wear of ceramic on ceramic hip joint prostheses. A long-term in vitro study, Biomaterials, 22, 717, 10.1016/S0142-9612(00)00235-0
Clarke, 2000, Ultra-low wear rates for rigid-on-rigid bearings in total hip replacements, Proc Inst Mech Eng [H], 214, 331, 10.1243/0954411001535381
Mizoue, 2003, Validation of acetabular cup wear volume based on direct and two-dimensional measurements: hip simulator analysis, J Orthop Sci, 8, 491, 10.1007/s00776-003-0674-2
Ramamurti, 1998, Analysis of the kinematics of different hip simulators used to study wear of candidate materials for the articulation of total hip arthroplasties, J Orthop Res, 16, 365, 10.1002/jor.1100160313
Saikko, 2001, Wear simulation of total hip prostheses with polyethylene against CoCr, alumina and diamond-like carbon, Biomaterials, 22, 1507, 10.1016/S0142-9612(00)00306-9
Saikko, 2002, Wear of conventional and cross-linked ultra-high-molecular-weight polyethylene acetabular cups against polished and roughened CoCr femoral heads in a biaxial hip simulator, J Biomed Mater Res, 63, 848, 10.1002/jbm.10471
Saikko, 2005, A hip wear simulator with 100 test stations, Proc Inst Mech Eng [H], 219, 309, 10.1243/095441105X34301
Smith, 2000, A tribological study of UHMWPE acetabular cups and polyurethane compliant layer acetabular cups, J Biomed Mater Res, 53, 710, 10.1002/1097-4636(2000)53:6<710::AID-JBM14>3.0.CO;2-R
Smith, 1999, Evaluation of a hip joint simulator, Proc Inst Mech Eng [H], 213, 469, 10.1243/0954411991535077
Smith, 2001, A five-station hip joint simulator, Proc Inst Mech Eng [H], 215, 61, 10.1243/0954411011533535
Barbour, 1999, A hip joint simulator study using simplified loading and motion cycles generating physiological wear paths and rates, Proc Inst Mech Eng [H], 213, 455, 10.1243/0954411991535068
McKellop, 1999, Effect of molecular weight, calcium stearate, and sterilization methods on the wear of ultra high molecular weight polyethylene acetabular cups in a hip joint simulator, J Orthop Res, 17, 329, 10.1002/jor.1100170306
Oberbach, 2005, Third-body-wear as a risk factor in joint endoprosthetics, Key Eng Mater, 284–286, 995, 10.4028/www.scientific.net/KEM.284-286.995
Oberbach, 2008, Investigation of aged dispersion ceramics by means of hip simulator, Key Eng Mater, 361–363, 771, 10.4028/www.scientific.net/KEM.361-363.771
Kaddick, 2001, Hip simulator wear testing according to the newly introduced standard ISO 14242, Proc Inst Mech Eng [H], 215, 429, 10.1243/0954411011536019
Ortega-Sáenz, 2007, Development of a hip wear simulation rig including micro-separation, Wear, 263, 1527, 10.1016/j.wear.2007.01.097
Saikko, 1992, A five-station hip joint simulator for wear rate studies, J Eng Med, 206, 195, 10.1243/PIME_PROC_1992_206_291_02