Triboelectric nanogenerators as new energy technology and self-powered sensors – Principles, problems and perspectives

Faraday Discussions - Tập 176 - Trang 447-458
Zhong Lin Wang1,2,3,4,5
1Atlanta, USA
2Beijing Institute of Nanoenergy and Nanosystems
3Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, China
4Chinese Academy of sciences
5School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, USA

Tóm tắt

Triboelectrification is one of the most common effects in our daily life, but it is usually taken as a negative effect with very limited positive applications. Here, we invented a triboelectric nanogenerator (TENG) based on organic materials that is used to convert mechanical energy into electricity. The TENG is based on the conjunction of triboelectrification and electrostatic induction, and it utilizes the most common materials available in our daily life, such as papers, fabrics, PTFE, PDMS, Al, PVCetc.In this short review, we first introduce the four most fundamental modes of TENG, based on which a range of applications have been demonstrated. The area power density reaches 1200 W m−2, volume density reaches 490 kW m−3, and an energy conversion efficiency of ∼50–85% has been demonstrated. The TENG can be applied to harvest all kinds of mechanical energy that is available in our daily life, such as human motion, walking, vibration, mechanical triggering, rotation energy, wind, a moving automobile, flowing water, rain drops, tide and ocean waves. Therefore, it is a new paradigm for energy harvesting. Furthermore, TENG can be a sensor that directly converts a mechanical triggering into a self-generated electric signal for detection of motion, vibration, mechanical stimuli, physical touching, and biological movement. After a summary of TENG for micro-scale energy harvesting, mega-scale energy harvesting, and self-powered systems, we will present a set of questions that need to be discussed and explored for applications of the TENG. Lastly, since the energy conversion efficiencies for each mode can be different although the materials are the same, depending on the triggering conditions and design geometry. But one common factor that determines the performance of all the TENGs is the charge density on the two surfaces, the saturation value of which may independent of the triggering configurations of the TENG. Therefore, the triboelectric charge density or the relative charge density in reference to a standard material (such as polytetrafluoroethylene (PTFE)) can be taken as a measuring matrix for characterizing the performance of the material for the TENG.

Từ khóa


Tài liệu tham khảo

Wang, 2008, Sci. Am., 298, 82, 10.1038/scientificamerican0108-82

Wang, 2012, Angew. Chem., 51, 11700, 10.1002/anie.201201656

Fan, 2012, Nano Energy, 1, 328, 10.1016/j.nanoen.2012.01.004

Wang, 2013, ACS Nano, 7, 9533, 10.1021/nn404614z

Zhu, 2012, Nano Lett., 12, 4960, 10.1021/nl302560k

Wang, 2012, Nano Lett., 12, 6339, 10.1021/nl303573d

Niu, 2013, Energy Environ. Sci., 6, 3576, 10.1039/c3ee42571a

Wang, 2013, Nano Lett., 13, 2226, 10.1021/nl400738p

Zhu, 2013, Nano Lett., 13, 2282, 10.1021/nl4008985

Jing, 2013, ACS Nano, 7, 10424, 10.1021/nn405209u

Lin, 2013, Nano Lett., 13, 2916, 10.1021/nl4013002

Niu, 2013, Adv. Mater., 25, 6184, 10.1002/adma.201302808

Niu, 2014, Energy Environ. Sci., 7, 2339, 10.1039/C4EE00498A

Yang, 2013, Adv. Mater., 25, 6594, 10.1002/adma.201302453

Yang, 2013, ACS Nano, 7, 7342, 10.1021/nn403021m

Niu, 2014, Adv. Funct. Mater., 24, 3332, 10.1002/adfm.201303799

Wang, 2014, Adv. Mater., 26, 2818, 10.1002/adma.201305303

Yang, 2014, ACS Appl. Mater. Interfaces, 6, 7479, 10.1021/am500864t

Zhong, 2014, ACS Nano, 8, 6273, 10.1021/nn501732z

Zhou, 2014, ACS Appl. Mater. Interfaces, 6, 14695, 10.1021/am504110u

Yang, 2013, ACS Nano, 7, 11317, 10.1021/nn405175z

Zhang, 2013, Nano Lett., 13, 1168, 10.1021/nl3045684

Kim, 2014, Adv. Mater., 26, 3778, 10.1002/adma.201470153

Zhu, 2013, Nano Energy, 2, 688, 10.1016/j.nanoen.2013.08.002

Meng, 2013, Nano Energy, 2, 1101, 10.1016/j.nanoen.2013.08.006

Yang, 2014, Adv. Energy Mater., 4, 1301322, 10.1002/aenm.201301322

Yang, 2014, Adv. Funct. Mater., 24, 4090, 10.1002/adfm.201304211

Chen, 2013, Adv. Mater., 25, 6094, 10.1002/adma.201302397

Lee, 2014, Adv. Mater., 26, 5037, 10.1002/adma.201401184

Yang, 2014, ACS Nano, 8, 2649, 10.1021/nn4063616

Yu, 2014, Nano Res., 10.1007/s12274-014-0559-z

Zhu, 2014, Adv. Mater., 26, 3788, 10.1002/adma.201400021

Zhu, 2014, Nat. Commun., 5, 3456, 10.1038/ncomms4456

Lin, 2013, Angew. Chem., Int. Ed., 52, 12545, 10.1002/anie.201307249

Lin, 2014, Adv. Mater., 26, 4690, 10.1002/adma.201400373

Lin, 2014, ACS Nano, 8, 64, 10.1021/nn401888h

Zhu, 2014, ACS Nano, 8, 6031, 10.1021/nn5012732

Wen, 2014, ACS Nano, 8, 7405, 10.1021/nn502618f

Hu, 2013, ACS Nano, 7, 10424, 10.1021/nn405209u

Yang, 2013, Adv. Energy Mater., 3, 1563, 10.1002/aenm.201300376

Yang, 2013, ACS Nano, 7, 9461, 10.1021/nn4043157

Yang, 2014, ACS Appl. Mater. Interfaces, 6, 3680, 10.1021/am406018h

Yang, 2013, ACS Nano, 7, 9213, 10.1021/nn403838y

Meng, 2013, Energy Environ. Sci., 6, 3235, 10.1039/c3ee42311e

Chen, 2014, Adv. Funct. Mater., 24, 5059, 10.1002/adfm.201400431

Han, 2014, Nano Energy, 9, 325, 10.1016/j.nanoen.2014.07.025

Su, 2014, ACS Nano, 8, 3843, 10.1021/nn500695q

Zhou, 2014, Adv. Mater., 26, 1719, 10.1002/adma.201304619

Jing, Nano Energy, 10, 305, 10.1016/j.nanoen.2014.09.018

Lin, 2013, Angew. Chem., Int. Ed., 52, 5065, 10.1002/anie.201300437

Zhou, 2013, Nano Lett., 13, 2771, 10.1021/nl401006x

Zhou, 2014, Nano Lett., 14, 1567, 10.1021/nl404819w

Wang, 2013, ACS Nano, 7, 11263, 10.1021/nn4050408

Lee, 2013, Nano Energy, 2, 817, 10.1016/j.nanoen.2013.02.004

Yang, 2013, Energy Environ. Sci., 6, 1744, 10.1039/c3ee40764k

Yang, 2013, Energy Environ. Sci., 6, 2429, 10.1039/c3ee41485j

Yang, 2013, Nano Lett., 13, 803, 10.1021/nl3046188

Zhang, 2014, Adv. Mater., 26, 3580, 10.1002/adma.201400207

Fan, 2014, Nanotechnology, 25, 135402, 10.1088/0957-4484/25/13/135402