Tri-dimensional numerical modelling of plasticity induced fatigue crack closure

Elber W. The significance of fatigue crack closure, damage tolerance in aircraft structures. In: ASTM STP, vol. 486; 1971. p. 230–47. Gonzalez-Herrera, 2005, Influence of minimum element size to determine crack closure stress by the finite element method, Engng Fract Mech, 72, 337, 10.1016/j.engfracmech.2004.04.002 Newman JC. Finite-element analysis of fatigue crack propagation – including the effects of crack closure, PhD thesis, VPI&SU, Blacksburg, VA; 1974. Newman JC. A finite-element analysis of fatigue crack closure. In: ASTM STP 590, Philadelphia, PA; 1976. p. 281–301. Fleck NA, Newman JC. Analysis of crack closure under plane strain conditions. In: ASTM STP 982, Philadelphia, PA; 1988. p. 319–41. Blom, 1985, An experimental and numerical study of crack closure, Engng Fract Mech, 22, 997, 10.1016/0013-7944(85)90039-6 Chermahini RG. Three-dimensional elastic–plastic finite-element analysis of fatigue crack growth and closure. PhD thesis, Old Dominion University, Norfolk, VA; 1986. Chermahini RG, Shivakumar KN, Newman JC. Three-dimensional finite-element simulation of fatigue crack growth and closure. In: ASTM STP 982, Philadelphia, PA; 1988. p. 398–413. Chermahini, 1989, Three-dimensional aspect of plasticity-induced fatigue crack closure, Engng Fract Mech, 34, 393, 10.1016/0013-7944(89)90152-5 Chermahini, 1993, Fatigue crack growth and closure behaviour of semicircular and semi-elliptical surface flaws, Int J Fatigue, 15, 259, 10.1016/0142-1123(93)90374-Y McClung, 1989, On the finite-element analysis of fatigue crack closure, part-1: basic modelling issues, Engng Fract Mech, 33, 237, 10.1016/0013-7944(89)90027-1 McClung, 1989, On the finite-element analysis of fatigue crack closure, part-2: numerical results, Engng Fract Mech, 33, 253, 10.1016/0013-7944(89)90028-3 Sehitoglu, 1991, Modelling of plane strain fatigue crack closure, ASME J Engng Mater Technol, 113, 31, 10.1115/1.2903380 Sun, 1992, Residual stress fields during fatigue crack growth, Fatigue Fract Engng Mater Struct, 15, 115, 10.1111/j.1460-2695.1992.tb00042.x Wu, 1996, A study of fatigue crack closure by elastic–plastic finite element for constant-amplitude loading, Int J Fract, 82, 43, 10.1007/BF00017863 Ellyin, 1999, A numerical investigation on the effect of an overload on fatigue crack opening and closure behaviour, Fatigue Fract Engng Mater Struct, 22, 835, 10.1046/j.1460-2695.1999.00223.x Wei, 2000, A study of fatigue crack closure in polycarbonate CT specimens, Engng Fract Mech, 66, 223, 10.1016/S0013-7944(00)00014-X Dougherty, 1997, Fatigue crack propagation and closure behaviour of modified 1070 steel: experimental results, Engng Fract Mech, 56, 167, 10.1016/S0013-7944(96)00103-8 Dougherty, 1997, Fatigue crack propagation and closure behaviour of modified 1070 steel: finite element study, Engng Fract Mech, 56, 189, 10.1016/S0013-7944(96)00104-X Zhang, 1998, On the finite element simulation of three-dimensional semi-circular fatigue crack growth and closure, Engng Fract Mech, 60, 341, 10.1016/S0013-7944(98)00016-2 Zhang, 1999, Three-dimensional elastic–plastic finite element modelling of small fatigue crack growth under a single tensile overload, Engng Fract Mech, 63, 229, 10.1016/S0013-7944(99)00026-0 Roychowdhury, 2003, A numerical investigation of 3-D small-scale yielding fatigue crack growth, Engng Fract Mech, 70, 2363, 10.1016/S0013-7944(03)00003-1 Roychowdhury, 2004, Effect of T-stress on fatigue crack closure in 3-D small-scale yielding, Int J Solid Struct, 41, 2581, 10.1016/j.ijsolstr.2003.11.004 Carlyle, 2007, Three-dimensional effects on fatigue crack closure under fully-reversed loading, Engng Fract Mech, 74, 457, 10.1016/j.engfracmech.2006.06.002 Alizadeh, 2007, A comparison of two and three-dimensional analyses of fatigue crack closure, Int J Fatigue, 29, 222, 10.1016/j.ijfatigue.2006.03.014 Solanki, 2004, Finite element analysis of plasticity-induced fatigue crack closure: an overview, Engng Fract Mech, 71, 149, 10.1016/S0013-7944(03)00099-7 Zapatero, 2008, Fatigue crack closure determination by means of finite element analysis, Engng Fract Mech, 75, 41, 10.1016/j.engfracmech.2007.02.020 Gonzalez-Herrera A. Determinación numérica de las tensiones de apertura y cierre de grieta en fatiga (numerical determination of openning and closure loads in fatigue crack closure), PhD thesis, University of Malaga; 2004 (in Spanish). Gonzalez-Herrera, 2006, Plastic zone study by means of tri-dimensional finite element models on fatigue crack closure, Key Engng Mater, 324–325, 555, 10.4028/www.scientific.net/KEM.324-325.555 Gonzalez-Herrera A, Moreno B, James MN, Zapatero J. Numerical and experimental correlation of fatigue crack closure. In: Proceeding of the ninth international fatigue congress, fatigue 2006, Atlanta GA, USA; 2006. p. O150. Telesman J, Fisher DM. Influence of fatigue crack wake length and state of stress on crack closure. In: ASTM STP 982, Philadelphia, PA; 1988. p. 568–82. Matsuoka, 1980, The influence of sheet thickness on delayed retardation phenomena in fatigue crack growth in HT80 steel and A5083 aluminium alloy, Engng Fract Mech, 13, 293, 10.1016/0013-7944(80)90061-2 Schijve, 1981, Some formulas for crack opening stress level, Engng Fract Mech, 14, 461, 10.1016/0013-7944(81)90034-5