Transverse deflection of cross-ply laminated plates under combined in-plane and lateral loads

Bruno, 1991, Buckling of moderately thick composite plates, Comp. Struct., 18, 65, 10.1016/0263-8223(91)90014-P Chia, 1980 Dong, 1993, Postbuckling response of laminated plates under uniaxial compression, Int. J. Non-Linear Mech., 28, 95, 10.1016/0020-7462(93)90009-A Huwang, 1991, Postbuckling behaviour of orthotropic rectangular plates, Comput. Struct., 40, 1 Jensen, 1988, Influence of mechanical couplings on the buckling and postbuckling of anisotropic plates, AIAA J., 26, 1269, 10.2514/3.10038 Kumar, 1989, Postbuckling analysis of orthotropic rectangular plates under uniaxial compression, J. Aero. Soc. India, 41, 191 Kumar, 1992, Postbuckling behaviour of rectangular plates under pure shear, J. Aero. Soc. India, 44, 285 Leissa, 1985, Buckling of laminated composite plates and shells panels, Wright Patterson Air Force Base technical report AFWAL-TR.85-3069 Leissa, 1987, A review of laminated composite plate buckling, Appl. Mech. Rev., 40, 491, 10.1115/1.3149534 Little, 1991, Large deflections of orthotropic plates in compression, J. Engng Mech., 117, 2150, 10.1061/(ASCE)0733-9399(1991)117:9(2150) Minguet, 1989, Postbuckling behaviour of laminated plates using a direct energy-minimization technique, AIAA J., 27, 1785, 10.2514/3.10335 Noor, 1977, Exploiting symmetries for efficient postbuckling analysis of composite plates, AIAA J., 15, 24, 10.2514/3.60601 Prabhakara, 1973, Large deflections of rectangular orthotropic plates under combined transverse and inplane loads, J. Mech. Engng Sci., 15, 346, 10.1243/JMES_JOUR_1973_015_061_02 Prabhakara, 1975, Finite deflections of unsymmetrically layered anisotropic rectangular plates subjected to the combined action of transverse and inplane loads, ASME J. Appl. Mech., 42, 517, 10.1115/1.3423623 Qatu, 1933, Buckling or transverse deflections of unsymmetrically laminated plates subjected to inplane loads, AIAA J., 31, 189, 10.2514/3.11336