Transparent ceramics: Processing, materials and applications

Hamano, 1977, Journal of the Ceramic Society of Japan, 85, 225 Cook, 2005, A new powder production route for transparent spinel windows: powder synthesis and window properties, vol. 5786, 41 Lu, 2006, Low-temperature high-pressure preparation of transparent nanocrystalline MgAl2O4 ceramics, Applied Physics Letters, 88, 213120, 10.1063/1.2207571 Zou, 2010, Nanosintering mechanism of MgAl2O4 transparent ceramics under high pressure, Materials Chemistry and Physics, 123, 529, 10.1016/j.matchemphys.2010.05.009 Zhang, 2009, Related mechanism of transparency in MgAl2O4 nano-ceramics prepared by sintering under high pressure and low temperature, Journal of Physics D: Applied Physics, 42, 052002, 10.1088/0022-3727/42/5/052002 Chen, 2010, Enhancement of sintering ability of magnesium aluminate spinel (MgAl2O4) ceramic nanopowders by shock compression, Powder Technology, 200, 91, 10.1016/j.powtec.2010.02.004 Liu, 2012, High-pressure sintering mechanism of yttrium aluminum garnet (Y3Al5O12) transparent nanoceramics, Scripta Materialia, 66, 319, 10.1016/j.scriptamat.2011.11.012 Hou, 2011, Effect of Nd concentration on structural and optical properties of Nd:Y2O3 transparent ceramic, Journal of Luminescence, 131, 1953, 10.1016/j.jlumin.2011.03.059 Hou, 2011, White light emission in Tm3+/Er3+/Yb3+ tri-doped Y2O3 transparent ceramic, Journal of Alloys and Compounds, 509, 2793, 10.1016/j.jallcom.2010.11.105 Podowitz, 2010, Effect of europium concentration on densification of transparent Eu:Y2O3 scintillator ceramics using hot pressing, Journal of the American Ceramic Society, 93, 82, 10.1111/j.1551-2916.2009.03350.x Haertlin, 1971, Hot-pressed (Pb, La)(Zr, Ti)O3 ferroelectric ceramics for electrooptic applications, Journal of the American Ceramic Society, 54, 1, 10.1111/j.1151-2916.1970.tb12105.x-i1 Jiang, 2005, Transparent electro-optic ceramics and devices, vol. 5644, 380 Sun, 1999, Controlled oxygen partial pressure sintering of (Pb, La)(Zr, Ti)O−3 ceramics, Journal of the American Ceramic Society, 82, 1447, 10.1111/j.1151-2916.1999.tb01938.x Yin, 2004, Preparation and characterization of transparent PZN–PLZT ceramics, Journal of Materials Research, 19, 729, 10.1557/jmr.2004.19.3.729 Ruan, 2010, Large electro-optic effect in La-doped 0.75Pb(Mg1/3Nb2/3)O−3–0.25PbTiO(3) transparent ceramic by two-stage sintering, Journal of the American Ceramic Society, 93, 2128, 10.1111/j.1551-2916.2010.03675.x Su, 2004, Translucent alpha-sialon ceramics by hot pressing, Journal of the American Ceramic Society, 87, 730, 10.1111/j.1551-2916.2004.00730.x Xie, 2004, Subsurface indentation damage and mechanical characterization of alpha-sialon ceramics, Journal of the American Ceramic Society, 87, 2114, 10.1111/j.1151-2916.2004.tb06368.x Xie, 2002, Microstructural tailoring and characterization of a calcium alpha-sialon composition, Journal of the American Ceramic Society, 85, 812, 10.1111/j.1151-2916.2002.tb00177.x Jones, 2003, Optical and mechanical properties of alpha/beta composite sialons, Journal of the American Ceramic Society, 86, 520, 10.1111/j.1151-2916.2003.tb03333.x Fang, 2004, Fabrication of translucent MgO ceramics using nanopowders, Materials Letters, 58, 551, 10.1016/S0167-577X(03)00560-3 Lyberis, 2012, Effect of Yb3+ concentration on optical properties of Yb:CaF2 transparent ceramics, Optical Materials, 34, 965, 10.1016/j.optmat.2011.05.036 Lyberis, 2011, Origin of light scattering in ytterbium doped calcium fluoride transparent ceramic for high power lasers, Journal of the European Ceramic Society, 31, 1619, 10.1016/j.jeurceramsoc.2011.02.038 Petit, 2011, Sintering of alpha-alumina for highly transparent ceramic applications, Journal of the European Ceramic Society, 31, 1957, 10.1016/j.jeurceramsoc.2011.04.034 Krell, 2003, Transparent sintered corundum with high hardness and strength, Journal of the American Ceramic Society, 86, 12, 10.1111/j.1151-2916.2003.tb03270.x Krell, 2009, Advanced spinel and sub-μm Al2O3 for transparent armour applications, Journal of the European Ceramic Society, 29, 275, 10.1016/j.jeurceramsoc.2008.03.024 Sutorik, 2012, Transparent solid solution magnesium aluminate spinel polycrystalline ceramic with the alumina-rich composition MgO·1.2Al2O3, Journal of the American Ceramic Society, 95, 636, 10.1111/j.1551-2916.2011.04798.x Dericioglu, 2005, Effect of chemical composition on the optical properties and fracture toughness of transparent magnesium aluminate spinel ceramics, Materials Transactions, 46, 996, 10.2320/matertrans.46.996 Dericioglu, 2003, Effect of grain boundary microcracking on the light transmittance of sintered transparent MgAl2O4, Journal of the European Ceramic Society, 23, 951, 10.1016/S0955-2219(02)00205-4 Mouzon, 2009, Fabrication of transparent yttria by HIP and the glass-encapsulation method, Journal of the European Ceramic Society, 29, 311, 10.1016/j.jeurceramsoc.2008.03.022 Serivalsatit, 2010, Submicrometer grain-sized transparent erbium-doped scandia ceramics, Journal of the American Ceramic Society, 93, 3657, 10.1111/j.1551-2916.2010.03954.x Seeley, 2011, Transparent Lu2O3:Eu ceramics by sinter and HIP optimization, Optical Materials, 33, 1721, 10.1016/j.optmat.2011.05.031 Tsukuma, 2008, Transparent 8 mol% Y2O3–ZrO2 (8Y) ceramics, Journal of the American Ceramic Society, 91, 813, 10.1111/j.1551-2916.2007.02202.x Hayashi, 1991, Transmission optical-properties of polycrystalline alumina with submicron grains, Materials Transactions JIM, 32, 1024, 10.2320/matertrans1989.32.1024 Tsukuma, 2006, Transparent MgAl2O4 spinel ceramics produced by HIP post-sintering, Journal of the Ceramic Society of Japan, 114, 802, 10.2109/jcersj.114.802 Cherepy, 2008, Transparent ceramic scintillator fabrication, properties and applications, vol. 7079 Alberta, 2001, Piezoelectric and dielectric properties of transparent Pb(Ni1/3Nb2/3)(1−x−y)ZrxTiyO3 ceramics prepared by hot isostatic pressing, International Journal of Inorganic Materials, 3, 987, 10.1016/S1466-6049(01)00200-8 Schneider, 1993, Optically translucent mullite ceramics, Journal of the American Ceramic Society, 76, 2912, 10.1111/j.1151-2916.1993.tb04037.x Aubry, 2009, Synthesis and optical characterizations of Yb-doped CaF2 ceramics, Optical Materials, 31, 750, 10.1016/j.optmat.2008.03.022 Uematsu, 1989, Transparent hydroxyapatite prepared by hot isostatic pressing of filter cake, Journal of the American Ceramic Society, 72, 1476, 10.1111/j.1151-2916.1989.tb07680.x Mandal, 1999, New developments in alpha-sialon ceramics, Journal of the European Ceramic Society, 19, 2349, 10.1016/S0955-2219(99)00111-9 Itatani, 2006, Thermal and optical properties of transparent magnesium oxide ceramics fabricated by post hot-isostatic pressing, Journal of the European Ceramic Society, 26, 639, 10.1016/j.jeurceramsoc.2005.06.011 Ji, 2005, Fabrication of transparent La2Hf2O7 ceramics from combustion synthesized powders, Materials Research Bulletin, 40, 553, 10.1016/j.materresbull.2004.10.010 Huang, 2009, Fabrication of transparent lanthanum-doped yttria ceramics by combination of two-step sintering and vacuum sintering, Journal of the American Ceramic Society, 92, 2883, 10.1111/j.1551-2916.2009.03312.x Li, 2010, Synthesis and spectral properties of Yb3+/Ho3+ co-doped yttria 2 μm transparent ceramics, Materials Letters, 64, 1344, 10.1016/j.matlet.2010.03.050 Wen, 2006, Synthesis of yttria nanopowders for transparent yttria ceramics, Optical Materials, 29, 239, 10.1016/j.optmat.2005.09.003 Wang, 2011, Synthesis of nanocrystalline Sc2O3 powder and fabrication of transparent Sc2O3 ceramics, Advances in Applied Ceramics, 110, 95, 10.1179/1743676110Y.0000000006 Li, 2005, Fabrication of transparent, sintered Sc2O3 ceramics, Journal of the American Ceramic Society, 88, 817, 10.1111/j.1551-2916.2005.00162.x Zhou, 2011, Fabrication, microstructure and optical properties of polycrystalline Er3+:Y3Al5O12 ceramics, Ceramics International, 37, 119, 10.1016/j.ceramint.2010.08.025 Zhou, 2011, Optical properties of Er, Yb co-doped YAG transparent ceramics, Ceramics International, 37, 513, 10.1016/j.ceramint.2010.09.031 Liu, 2012, Effect of La2O3 on microstructures and laser properties of Nd:YAG ceramics, Journal of Alloys and Compounds, 512, 1, 10.1016/j.jallcom.2011.09.038 Li, 2008, Laminar-structured YAG/Nd:YAG/YAG transparent ceramics for solid-state lasers, International Journal of Applied Ceramic Technology, 5, 360, 10.1111/j.1744-7402.2008.02244.x Appiagyei, 2008, Aqueous slip casting of transparent yttrium aluminum garnet (YAG) ceramics, Ceramics International, 34, 1309, 10.1016/j.ceramint.2007.03.010 Li, 2010, Fabrication of Nd:YAG transparent ceramics with TEOS, MgO and compound additives as sintering aids, Journal of Alloys and Compounds, 502, 225, 10.1016/j.jallcom.2010.04.151 Qin, 2012, Fabrication and properties of highly transparent Er:YAG ceramics, Optical Materials, 34, 973, 10.1016/j.optmat.2011.05.014 Gong, 2009, Fabrication of yttrium aluminum garnet transparent ceramics from yttria nanopowders synthesized by carbonate precipitation, Journal of Electroceramics, 23, 89, 10.1007/s10832-008-9545-8 Qin, 2012, Fabrication and plasma resistance properties of transparent YAG ceramics, Ceramics International, 38, 2529, 10.1016/j.ceramint.2011.11.023 Gong, 2011, Fabrication and laser performance of highly transparent Nd:YAG ceramics from well-dispersed Nd:Y2O3 nanopowders by freeze-drying, Journal of Nanoparticle Research, 13, 3853, 10.1007/s11051-011-0336-9 Yang, 2012, The effect of MgO and SiO2 codoping on the properties of Nd:YAG transparent ceramic, Optical Materials, 34, 940, 10.1016/j.optmat.2011.05.029 Zhang, 2012, Assessment of light scattering by pores in Nd:YAG transparent ceramics, Journal of Alloys and Compounds, 520, 36, 10.1016/j.jallcom.2011.12.012 Ramirez, 2008, Three-dimensional grain boundary spectroscopy in transparent high power ceramic laser materials, Optics Express, 16, 5965, 10.1364/OE.16.005965 Lee, 2006, Solid-state reactive sintering of transparent polycrystalline Nd:YAG ceramics, Journal of the American Ceramic Society, 89, 1945, 10.1111/j.1551-2916.2006.01051.x Yagi, 2006, Influence of annealing conditions on the optical properties of chromium-doped ceramic Y3Al5O12, Optical Materials, 29, 392, 10.1016/j.optmat.2005.08.035 Yagi, 2007, Characterizations and laser performances of highly transparent Nd3+:Y3Al5O12 laser ceramics, Optical Materials, 29, 1258, 10.1016/j.optmat.2006.01.033 Serantoni, 2012, Improvements in the production of Yb:YAG transparent ceramic materials: spray drying optimisation, Optical Materials, 34, 995, 10.1016/j.optmat.2011.06.003 Xiong, 2007, Translucent Mg-alpha-sialon ceramics prepared by spark plasma sintering, Journal of the American Ceramic Society, 90, 1647, 10.1111/j.1551-2916.2007.01615.x Chaim, 2010, Optically transparent ceramics by spark plasma sintering of oxide nanoparticles, Scripta Materialia, 63, 211, 10.1016/j.scriptamat.2010.03.056 An, 2011, Two-step pressure sintering of transparent lutetium oxide by spark plasma sintering, Journal of the European Ceramic Society, 31, 1597, 10.1016/j.jeurceramsoc.2011.03.014 Shen, 2002, Spark plasma sintering of alumina, Journal of the American Ceramic Society, 85, 1921, 10.1111/j.1151-2916.2002.tb00381.x Roussel, 2011, Effects of the nature of the doping salt and of the thermal pre-treatment and sintering temperature on spark plasma sintering of transparent alumina, Ceramics International, 37, 3565, 10.1016/j.ceramint.2011.05.152 Kim, 2007, Spark plasma sintering of transparent alumina, Scripta Materialia, 57, 607, 10.1016/j.scriptamat.2007.06.009 Kim, 2009, Effects of heating rate on microstructure and transparency of spark-plasma-sintered alumina, Journal of the European Ceramic Society, 29, 323, 10.1016/j.jeurceramsoc.2008.03.015 Kim, 2009, Microstructure and optical properties of transparent alumina, Acta Materialia, 57, 1319, 10.1016/j.actamat.2008.11.010 Wang, 2010, Transparent polycrystalline ruby ceramic by spark plasma sintering, Materials Research Bulletin, 45, 1127, 10.1016/j.materresbull.2010.05.034 Grasso, 2011, Effects of pressure application method on transparency of spark plasma sintered alumina, Journal of the American Ceramic Society, 94, 1405, 10.1111/j.1551-2916.2010.04274.x Alvarez-Clemares, 2010, Transparent alumina/ceria nanocomposites by spark plasma sintering, Advanced Engineering Materials, 12, 1154, 10.1002/adem.201000176 Jin, 2010, Highly transparent alumina spark plasma sintered from common-grade commercial powder: the effect of powder treatment, Journal of the American Ceramic Society, 93, 1232 Risbud, 1995, Retention of nanostructure in aluminum-oxide by very rapid sintering at 1150-°C, Journal of Materials Research, 10, 237, 10.1557/JMR.1995.0237 Zhan, 2002, Alumina-based nanocomposites consolidated by spark plasma sintering, Scripta Materialia, 47, 737, 10.1016/S1359-6462(02)00191-4 Zhou, 2004, Densification and grain growth in pulse electric current sintering of alumina, Journal of the European Ceramic Society, 24, 3465, 10.1016/j.jeurceramsoc.2003.10.013 Suarez, 2009, Grain growth control and transparency in spark plasma sintered self-doped alumina materials, Scripta Materialia, 61, 931, 10.1016/j.scriptamat.2009.07.026 Aman, 2009, Influence of green state processes on the sintering behaviour and the subsequent optical properties of spark plasma sintered alumina, Journal of the European Ceramic Society, 29, 3363, 10.1016/j.jeurceramsoc.2009.07.014 Stuer, 2010, Transparent polycrystalline alumina using spark plasma sintering: effect of Mg, Y and La doping, Journal of the European Ceramic Society, 30, 1335, 10.1016/j.jeurceramsoc.2009.12.001 Jiang, 2007, Spark plasma sintering: a high strain rate low temperature forming tool for ceramics, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 463, 89, 10.1016/j.msea.2006.07.163 Shen, 2003, Formidable increase in the superplasticity of ceramics in the presence of an electric field, Advanced Materials, 15, 1006, 10.1002/adma.200304863 Jiang, 2007, Spark plasma sintering and forming of transparent polycrystalline Al(2)O(3) windows and domes – art. no. 654509, vol. 6545, 54509 Wang, 2009, Transparent MgAl2O4 ceramic produced by spark plasma sintering, Scripta Materialia, 61, 193, 10.1016/j.scriptamat.2009.03.039 Frage, 2007, Spark plasma sintering (SPS) of transparent magnesium–aluminate spinel, Journal of Materials Science, 42, 3273, 10.1007/s10853-007-1672-0 Meir, 2009, Synthesis and densification of transparent magnesium aluminate spinel by SPS processing, Journal of the American Ceramic Society, 92, 358, 10.1111/j.1551-2916.2008.02893.x Morita, 2008, Fabrication of transparent MgAl2O4 spinel polycrystal by spark plasma sintering processing, Scripta Materialia, 58, 1114, 10.1016/j.scriptamat.2008.02.008 Chaim, 2006, Transparent YAG ceramics by surface softening of nanoparticles in spark plasma sintering, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 429, 74, 10.1016/j.msea.2006.04.072 Chaim, 2007, Transparent yttrium aluminum garnet (YAG) ceramics by spark plasma sintering, Journal of the European Ceramic Society, 27, 3331, 10.1016/j.jeurceramsoc.2007.02.193 Yoshida, 2011, Low-temperature spark plasma sintering of yttria ceramics with ultrafine grain size, Journal of the American Ceramic Society, 94, 3301, 10.1111/j.1551-2916.2011.04583.x Chaim, 2009, Densification of nanocrystalline Y2O3 ceramic powder by spark plasma sintering, Journal of the European Ceramic Society, 29, 91, 10.1016/j.jeurceramsoc.2008.05.043 Yoshida, 2008, Densification of nanocrystalline yttria by low temperature spark plasma sintering, Journal of the American Ceramic Society, 91, 1707, 10.1111/j.1551-2916.2008.02337.x Zhang, 2010, Optimization of high-pressure sintering of transparent zirconia with nano-sized grains, Journal of Alloys and Compounds, 508, 196, 10.1016/j.jallcom.2010.08.045 Grasso, 2009, Electric current activated/assisted sintering (ECAS): a review of patents 1906–2008, Science and Technology of Advanced Materials, 10, 10.1088/1468-6996/10/5/053001 Anselmi-Tamburini, 2007, Transparent nanometric cubic and tetragonal zirconia obtained by high-pressure pulsed electric current sintering, Advanced Functional Materials, 17, 3267, 10.1002/adfm.200600959 Zhang, 2011, Optical properties and microstructure of nanocrystalline cubic zirconia prepared by high-pressure spark plasma sintering, Journal of the American Ceramic Society, 94, 2981, 10.1111/j.1551-2916.2011.04477.x Zhang, 2011, Fabrication of transparent yttria by high-pressure spark plasma sintering, Journal of the American Ceramic Society, 94, 3206, 10.1111/j.1551-2916.2011.04789.x An, 2012, Transparent yttria produced by spark plasma sintering at moderate temperature and pressure profiles, Journal of the European Ceramic Society, 32, 1035, 10.1016/j.jeurceramsoc.2011.11.023 An, 2011, Fabrication of transparent lutetium oxide by spark plasma sintering, Journal of the American Ceramic Society, 94, 695, 10.1111/j.1551-2916.2010.04145.x Zhang, 2011, Effect of sintering temperature on optical properties and microstructure of translucent zirconia prepared by high-pressure spark plasma sintering, Science and Technology of Advanced Materials, 12, 10.1088/1468-6996/12/5/055003 Lei, 2012, Transparent yttria stabilized zirconia from glycine-nitrate process by spark plasma sintering, Ceramics International, 38, 23, 10.1016/j.ceramint.2011.05.122 Zhang, 2009, Transparent mullite ceramic from single-phase gel by spark plasma sintering, Journal of the European Ceramic Society, 29, 2705, 10.1016/j.jeurceramsoc.2009.04.012 Watanabe, 2005, Fabrication of transparent hydroxyapatite sintered body with high crystal orientation by pulse electric current sintering, Journal of the American Ceramic Society, 88, 243, 10.1111/j.1551-2916.2004.00041.x Guo, 2005, Fabrication of nanostructured hydroxyapatite via hydrothermal synthesis and spark plasma sintering, Journal of the American Ceramic Society, 88, 1026, 10.1111/j.1551-2916.2005.00198.x Eriksson, 2011, Transparent hydroxyapatite ceramics with nanograin structure prepared by high pressure spark plasma sintering at the minimized sintering temperature, Journal of the European Ceramic Society, 31, 1533, 10.1016/j.jeurceramsoc.2011.03.021 Chaim, 2004, Transparent nanocrystalline MgO by rapid and low-temperature spark plasma sintering, Journal of Materials Research, 19, 2527, 10.1557/JMR.2004.0334 Xiong, 2006, Fabrication of transparent AIN ceramics, Journal of Materials Science, 41, 2537, 10.1007/s10853-006-5314-8 Zhou, 2004, Preparation and properties of lead zirconate stannate titanate sintered by spark plasma sintering, Journal of the American Ceramic Society, 87, 606, 10.1111/j.1551-2916.2004.00606.x Wu, 2002, Spark plasma sintering of transparent PbZrO3–PbTiO3–Pb(Zn1/3Nb2/3)O−3 ceramics, Japanese Journal of Applied Physics Part 2-Letters, 41, L219, 10.1143/JJAP.41.L219 Wu, 2005, Effects of preparation conditions on the structural and optical properties of spark plasma-sintered PLZT (8/65/35) ceramics, Journal of the American Ceramic Society, 88, 3327, 10.1111/j.1551-2916.2005.00601.x Cheng, 1999, Microwave synthesis of aluminum oxynitride (ALON), Journal of Materials Science Letters, 18, 1989, 10.1023/A:1006681732457 Cheng, 2001, Microwave reactive sintering to fully transparent aluminum oxynitride (ALON) ceramics, Journal of Materials Science Letters, 20, 77, 10.1023/A:1006731218817 Fang, 1996, Transparent mullite ceramics from diphasic aerogels by microwave and conventional processings, Materials Letters, 28, 11, 10.1016/0167-577X(96)00028-6 Wei, 2000, Sintering of translucent alumina in a nitrogen–hydrogen gas atmosphere, Journal of the American Ceramic Society, 83, 1641, 10.1111/j.1151-2916.2000.tb01443.x Mao, 2008, Transparent polycrystalline alumina ceramics with orientated optical axes, Journal of the American Ceramic Society, 91, 3431, 10.1111/j.1551-2916.2008.02611.x Apetz, 2003, Transparent alumina: a light-scattering model, Journal of the American Ceramic Society, 86, 480, 10.1111/j.1151-2916.2003.tb03325.x Mizuta, 1992, Preparation of high-strength and translucent alumina by hot isostatic pressing, Journal of the American Ceramic Society, 75, 469, 10.1111/j.1151-2916.1992.tb08203.x Krell, 2006, Effects of the homogeneity of particle coordination on solid-state sintering of transparent alumina, Journal of the American Ceramic Society, 89, 1985, 10.1111/j.1551-2916.2006.00985.x Jiang, 2008, Optically transparent polycrystalline Al2O3 produced by spark plasma sintering, Journal of the American Ceramic Society, 91, 151, 10.1111/j.1551-2916.2007.02086.x Li, 2006, Densification and grain growth of Al2O3 nanoceramics during pressureless sintering, Journal of the American Ceramic Society, 89, 139, 10.1111/j.1551-2916.2005.00654.x Godlinski, 2002, Transparent alumina with submicrometer grains by float packing and sintering, Journal of the American Ceramic Society, 85, 2449, 10.1111/j.1151-2916.2002.tb00479.x Liu, 2011, Fabrication of injection moulded translucent alumina ceramics via pressureless sintering, Advances in Applied Ceramics, 110, 251, 10.1179/1743676111Y.0000000005 Roh, 2011, Novel fabrication of pressure-less sintering of translucent powder injection molded (PIM) alumina blocks, Ceramics International, 37, 321, 10.1016/j.ceramint.2010.09.011 Brosnan, 2003, Microwave sintering of alumina at 2.45 GHz, Journal of the American Ceramic Society, 86, 1307, 10.1111/j.1151-2916.2003.tb03467.x Kim, 2007, Improvement of translucency in Al2O3 ceramics by two-step sintering technique, Journal of the European Ceramic Society, 27, 3629, 10.1016/j.jeurceramsoc.2007.02.002 Liu, 2011, Novel preparation of translucent alumina ceramics induced by doping additives via chemical precipitation method, Journal of the American Ceramic Society, 94, 3211, 10.1111/j.1551-2916.2011.04796.x Liu, 2011, Injection molding of surface modified powders with high solid loadings: a case for fabrication of translucent alumina ceramics, Journal of the European Ceramic Society, 31, 1611, 10.1016/j.jeurceramsoc.2011.03.003 Liu, 2012, Fabrication of translucent alumina ceramics from pre-sintered bodies infiltrated with sintering additive precursor solutions, Journal of the European Ceramic Society, 32, 711, 10.1016/j.jeurceramsoc.2011.10.019 Hotta, 2003, Effect of oligosaccharide alcohol addition to alumina slurry and translucent alumina produced by slip casting, Journal of the American Ceramic Society, 86, 755, 10.1111/j.1151-2916.2003.tb03370.x Meng, 2007, Rapid densification of nano-grained alumina by high temperature and pressure with a very high heating rate, Journal of the American Ceramic Society, 90, 1262, 10.1111/j.1551-2916.2007.01599.x Watzig, 2009, Transparent spinel by reactive sintering of different alumina modifications with MgO, CFI-Ceramic Forum International, 86, E47 Krell, 2003, Transparent sintered sub-μm AI(2)O(3) with IR transmissivity equal to sapphire, vol. 5078, 199 Krell, 1996, Improved hardness and hierarchic influences on wear in submicron sintered alumina, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 209, 156, 10.1016/0921-5093(95)10155-1 Krell, 1998, The effects of load, grain size, and grain boundaries on the hardness of alumina, vol. 19, 159 Saha, 2005, Dependence of moisture absorption property on sol–gel process of transparent nano-structured gamma-Al2O3 ceramics, Sensors and Actuators B-Chemical, 109, 363, 10.1016/j.snb.2005.01.002 Peuchert, 2009, Transparent cubic-ZrO(2) ceramics for application as optical lenses, Journal of the European Ceramic Society, 29, 283, 10.1016/j.jeurceramsoc.2008.03.028 Vahldiek, 1967, Translucent ZrO2 prepared at high pressures, Journal of the Less-Common Metals, 13, 530, 10.1016/0022-5088(67)90087-2 Mazdiyas, 1967, Cubic phase stabilization of translucent yttria–zirconia at very low temperatures, Journal of the American Ceramic Society, 50, 532, 10.1111/j.1151-2916.1967.tb14989.x Duran, 1989, Preparation, sintering, and properties of translucent Er2O3-doped tetragonal zirconia, Journal of the American Ceramic Society, 72, 2088, 10.1111/j.1151-2916.1989.tb06036.x Srdic, 2000, Sintering behavior of nanocrystalline zirconia prepared by chemical vapor synthesis, Journal of the American Ceramic Society, 83, 729, 10.1111/j.1151-2916.2000.tb01266.x Srdic, 2000, Sintering behavior of nanocrystalline zirconia doped with alumina prepared by chemical vapor synthesis, Journal of the American Ceramic Society, 83, 1853, 10.1111/j.1151-2916.2000.tb01481.x Tsukuma, 1986, Transparent titania yttria zirconia ceramics, Journal of Materials Science Letters, 5, 1143, 10.1007/BF01742227 Casolco, 2008, Transparent/translucent polycrystalline nanostructured yttria stabilized zirconia with varying colors, Scripta Materialia, 58, 516, 10.1016/j.scriptamat.2007.11.014 Alaniz, 2009, Optical properties of transparent nanocrystalline yttria stabilized zirconia, Optical Materials, 32, 62, 10.1016/j.optmat.2009.06.004 Nagayama, 2009, Development of colored zirconia ceramics, TOSOH Research & Technology Review, 53 Klimke, 2005 Trunec, 2009, Higher fracture toughness of tetragonal zirconia ceramics through nanocrystalline structure, Scripta Materialia, 61, 56, 10.1016/j.scriptamat.2009.03.019 Klimke, 2011, Transparent tetragonal yttria-stabilized zirconia ceramics: influence of scattering caused by birefringence, Journal of the American Ceramic Society, 94, 1850, 10.1111/j.1551-2916.2010.04322.x Falk G, Guise A, Wolff M, Clasen R. Sintering conditions of translucent zirconia ceramics made of nanosized powders sintering. In: International conference on the science, technology & applications of sintering, Penn State University, USA, 2003. Chaim, 1998, Fabrication of dense nanocrystalline ZrO2–3 wt.% Y2O3 by hot-isostatic pressing, Journal of Materials Research, 13, 1875, 10.1557/JMR.1998.0266 Nigara, 1968, Measurement of optical constants of yttrium oxide, Japanese Journal of Applied Physics, 7, 404, 10.1143/JJAP.7.404 Fukabori, 2010, Optical and scintillation characteristics of Y2O3 transparent ceramic, Journal of Applied Physics, 107, 10.1063/1.3330407 Lu, 2002, Yb3+:Y2O3 ceramics – a novel solid-state laser material, Japanese Journal of Applied Physics Part 2-Letters, 41, L1373, 10.1143/JJAP.41.L1373 Lu, 1989, Large diameter Y2O3-shield for the crystal growth of YAP, Journal of Synthetic Crystals, 18, 341 Hou, 2011, Investigation of up-conversion luminescence properties of RE/Yb co-doped Y2O3 transparent ceramic (RE = Er, Ho, Pr, and Tm), Physica B-Condensed Matter, 406, 3931, 10.1016/j.physb.2010.10.090 Micheli, 1992, High-density yttria for practical ceramic applications, Journal of the American Ceramic Society, 75, 709, 10.1111/j.1151-2916.1992.tb07863.x Iwasawa, 2007, Plasma-resistant dense yttrium oxide film prepared by aerosol deposition process, Journal of the American Ceramic Society, 90, 2327, 10.1111/j.1551-2916.2007.01738.x Lefever, 1967, Transparent yttrium oxide ceramics, Materials Research Bulletin, 2, 865, 10.1016/0025-5408(67)90096-7 Ikegami, 2002, Fabrication of transparent yttria ceramics by the low-temperature synthesis of yttrium hydroxide, Journal of the American Ceramic Society, 85, 1725, 10.1111/j.1151-2916.2002.tb00342.x Jin, 2010, ZrO2-doped Y2O3 transparent ceramics via slip casting and vacuum sintering, Journal of the European Ceramic Society, 30, 2139, 10.1016/j.jeurceramsoc.2010.04.004 Zhang, 2009, Sintering of Yb(3+):Y(2)O(3) transparent ceramics in hydrogen atmosphere, Journal of the European Ceramic Society, 29, 305, 10.1016/j.jeurceramsoc.2008.03.006 Greskovi, 1973, Polycrystalline ceramic lasers, Journal of Applied Physics, 44, 4599, 10.1063/1.1662008 Rhodes, 1981, Controlled transient solid 2nd-phase sintering of yttria, Journal of the American Ceramic Society, 64, 13, 10.1111/j.1151-2916.1981.tb09551.x Saito, 1998, Fabrication of transparent yttria ceramics at low temperature using carbonate-derived powder, Journal of the American Ceramic Society, 81, 2023, 10.1111/j.1151-2916.1998.tb02583.x Eilers, 2007, Fabrication, optical transmittance, and hardness of IR-transparent ceramics made from nanophase yttria, Journal of the European Ceramic Society, 27, 4711, 10.1016/j.jeurceramsoc.2007.04.006 Huang, 2011, Synthesis of mono-dispersed spherical Nd:Y2O3 powder for transparent ceramics, Ceramics International, 37, 3523, 10.1016/j.ceramint.2011.06.008 Serivalsatit, 2010, Synthesis, processing, and properties of submicrometer-grained highly transparent yttria ceramics, Journal of the American Ceramic Society, 93, 1320 Ikesue, 1996, Synthesis of transparent Nd-doped HfO2–Y2O3 ceramics using HIP, Journal of the American Ceramic Society, 79, 359, 10.1111/j.1151-2916.1996.tb08129.x Majima, 1993, Effect of LiF addition on the preparation of transparent Y2O3 by vacuum hot-pressing method, Journal of the Japan Institute of Metals, 57, 1221, 10.2320/jinstmet1952.57.10_1221 Hou, 2010, Effect of ZrO2 on the sinterability and spectral properties of (Yb0.05Y0.95)(2)O−3 transparent ceramic, Optical Materials, 32, 920, 10.1016/j.optmat.2010.01.024 Yi, 2012, Structural and optical properties of Tm:Y2O3 transparent ceramic with La2O3, ZrO2 as composite sintering aid, Journal of the European Ceramic Society, 32, 381, 10.1016/j.jeurceramsoc.2011.09.015 Huang, 2010, Sintering of transparent yttria ceramics in oxygen atmosphere, Journal of the American Ceramic Society, 93, 2964, 10.1111/j.1551-2916.2010.03940.x Gheorghe, 2009, Spectroscopic properties of Ho(3+) doped Sc(2)O(3) transparent ceramic for laser materials, Journal of Applied Physics, 105, 123110, 10.1063/1.3153949 Li, 2004, Sc2O3 nanopowders via hydroxyl precipitation: effects of sulfate ions on powder properties, Journal of the American Ceramic Society, 87, 1008, 10.1111/j.1551-2916.2004.01008.x Kuck, 2000, Spectroscopic properties of Cr-doped Sc2O3, Journal of Luminescence, 87–89, 1122, 10.1016/S0022-2313(99)00563-3 Fornasiero, 1999, New oxide crystals for solid state lasers, Crystal Research and Technology, 34, 255, 10.1002/(SICI)1521-4079(199902)34:2<255::AID-CRAT255>3.0.CO;2-U Li, 2003, Fabrication of transparent Sc2O3 ceramics with powders thermally pyrolyzed from sulfate, Journal of Materials Research, 18, 1816, 10.1557/JMR.2003.0252 Lupei, 2008, Excited states dynamics of Er3+ in Sc2O3 ceramic, Journal of Luminescence, 128, 918, 10.1016/j.jlumin.2007.11.032 Longuet, 2009, Preparation of Yb-doped Sc2O3 transparent ceramics for laser applications, vol. 1111, 161 Li, 2004, Solution-based processing of Sc2O3 nanopowders yielding transparent ceramics, Journal of Materials Research, 19, 733, 10.1557/jmr.2004.19.3.733 Gheorghe, 2011, Intensity parameters of Tm3+ doped Sc2O3 transparent ceramic laser material, Optical Materials, 33, 501, 10.1016/j.optmat.2010.10.032 Trabelsi, 2010, Crystal field analysis of Er3+ in Sc2O3 transparent ceramics, Journal of Luminescence, 130, 927, 10.1016/j.jlumin.2010.02.004 Shi, 2009, Processing and scintillation properties of Eu3+ doped Lu2O3 transparent ceramics, Optical Materials, 31, 729, 10.1016/j.optmat.2008.04.017 Wang, 2008, Preparation and spectroscopic characterization of LU(2)O(3):Eu(3+) nanopowders and ceramics, Optical Materials, 30, 1484, 10.1016/j.optmat.2007.09.006 Chen, 2006, Fabrication and photoluminescence characteristics of Eu3+-doped Lu2O3 transparent ceramics, Journal of the American Ceramic Society, 89, 2038, 10.1111/j.1551-2916.2006.01016.x Chen, 2008, Pressureless sintering of translucent MgO ceramics, Scripta Materialia, 59, 757, 10.1016/j.scriptamat.2008.06.007 Rice, 1962, American Ceramic Society Bulletin, 41 Kan, 2011, Low-temperature sintering and microwave dielectric properties of MgO ceramic with LiF addition, Japanese Journal of Applied Physics, 50, 10.1143/JJAP.50.09NF02 Rhodes, 1967, Mechanism of pressure sintering MgO with LiF additions, American Ceramic Society Bulletin, 46, 469 Hart, 1971, Effect of LiF on creep of MgO, Journal of the American Ceramic Society, 54, 315, 10.1111/j.1151-2916.1971.tb12299.x Xu, 2006, Preparation of highly dispersed YAG nano-sized powder by co-precipitation method, Materials Letters, 60, 962, 10.1016/j.matlet.2005.10.052 Ikesue, 1995, Fabrication of polycrystalline, transparent YAG ceramics by a solid-state reaction method, Journal of the American Ceramic Society, 78, 225, 10.1111/j.1151-2916.1995.tb08389.x Ikesue, 1995, Synthesis of Nd3+, Cr3+-codoped YAG ceramics for high-efficiency solid-state lasers, Journal of the American Ceramic Society, 78, 2545, 10.1111/j.1151-2916.1995.tb08699.x Ikesue, 1995, Fabrication and optical-properties of high-performance polycrystalline Nd–YAG ceramics for solid-state lasers, Journal of the American Ceramic Society, 78, 1033, 10.1111/j.1151-2916.1995.tb08433.x Zhang, 2005, Novel synthesis of YAG by solvothermal method, Journal of Crystal Growth, 275, E1913, 10.1016/j.jcrysgro.2004.11.274 Li, 2000, Low-temperature fabrication of transparent yttrium aluminum garnet (YAG) ceramics without additives, Journal of the American Ceramic Society, 83, 961, 10.1111/j.1151-2916.2000.tb01305.x Zych, 2000, Temperature dependence of host-associated luminescence from YAG transparent ceramic material, Journal of Luminescence, 90, 89, 10.1016/S0022-2313(99)00620-1 Li, 2012, Optical properties of the polycrystalline transparent Nd:YAG ceramics prepared by two-step sintering, Ceramics International, 38, S649, 10.1016/j.ceramint.2011.05.127 Dewith, 1984, Translucent Y3AL5O12 ceramics, Materials Research Bulletin, 19, 1669, 10.1016/0025-5408(84)90245-9 Liu, 2011, Synthesis of Nd:YAG powders leading to transparent ceramics: the effect of MgO dopant, Journal of the European Ceramic Society, 31, 653, 10.1016/j.jeurceramsoc.2010.10.016 Chen, 2012, Selection of different sintering aids and heat-treatment of Y2O3 raw powders for Yb3+:Y3Al5O12 transparent ceramics, vol. 8206 Stevenson, 2011, Effect of SiO2 on densification and microstructure development in Nd:YAG transparent ceramics, Journal of the American Ceramic Society, 94, 1380, 10.1111/j.1551-2916.2010.04260.x Chen, 1996, Sintering of fine oxide powders. 1. Microstructural evolution, Journal of the American Ceramic Society, 79, 3129, 10.1111/j.1151-2916.1996.tb08087.x Chen, 1997, Sintering of fine oxide powders .2. Sintering mechanisms, Journal of the American Ceramic Society, 80, 637, 10.1111/j.1151-2916.1997.tb02879.x Kopylov, 2007, Nd:Y2O3 nanopowders for laser ceramics, Optical Materials, 29, 1236, 10.1016/j.optmat.2006.06.018 Esposito, 2009, Role of powder properties and shaping techniques on the formation of pore-free YAG materials, Journal of the European Ceramic Society, 29, 317, 10.1016/j.jeurceramsoc.2008.03.047 Liu, 2010, Influence of pH values on (Nd plus Y):Al molar ratio of Nd:YAG nanopowders and preparation of transparent ceramics, Journal of Alloys and Compounds, 503, 525, 10.1016/j.jallcom.2010.05.048 Rabinovitch, 2008, Freeze-dried nanometric neodymium-doped YAG powders for transparent ceramics, Journal of Materials Processing Technology, 199, 314, 10.1016/j.jmatprotec.2007.08.022 Li, 2006, Fabrication of Cr4+, Nd3+:YAG transparent ceramics for self-Q-switched laser, Journal of Non-Crystalline Solids, 352, 2404, 10.1016/j.jnoncrysol.2006.02.062 Nishiura, 2011, Properties of transparent Ce:YAG ceramic phosphors for white LED, Optical Materials, 33, 688, 10.1016/j.optmat.2010.06.005 Feng, 2006, Preparation and optical properties of transparent Eu3+:Y3Al5(1−x)Sc5xO12 ceramics, Journal of the American Ceramic Society, 89, 1590, 10.1111/j.1551-2916.2006.00897.x Zhang, 2012, Effect of annealing on the optical properties of Nd:YAG transparent ceramics, Optical Materials, 34, 685, 10.1016/j.optmat.2011.10.001 Yanagida, 2011, Scintillation properties of transparent ceramic and single crystalline Nd:YAG scintillators, Nuclear Instruments & Methods in Physics Research Section A-Accelerators Spectrometers Detectors and Associated Equipment, 631, 54, 10.1016/j.nima.2010.12.038 Reimanis, 2004 Sepulveda, 2011, High performance spinel ceramics for IR windows and domes, vol. 8016 Bratton, 1974, Translucent sintered MgAl2O4, Journal of the American Ceramic Society, 57, 283, 10.1111/j.1151-2916.1974.tb10901.x Li, 2000, Fabrication of translucent magnesium aluminum spinel ceramics, Journal of the American Ceramic Society, 83, 2866, 10.1111/j.1151-2916.2000.tb01648.x Villalobos, 2005, Degradation of magnesium aluminum spinel by lithium fluoride sintering aid, Journal of the American Ceramic Society, 88, 1321, 10.1111/j.1551-2916.2005.00209.x Rozenburg, 2007, Chemical interaction between LiF and MgAl2O4 spinel during sintering, Journal of the American Ceramic Society, 90, 2038, 10.1111/j.1551-2916.2007.01723.x Krell, 2010, Fine-grained transparent spinel windows by the processing of different nanopowders, Journal of the American Ceramic Society, 93, 2656, 10.1111/j.1551-2916.2010.03814.x DiGiovanni, 2005, Hard transparent domes and windows from magnesium aluminate spinel, vol. 5786, 56 Morita, 2009, Spark-plasma-sintering condition optimization for producing transparent MgAl(2)O(4) spinel polycrystal, Journal of the American Ceramic Society, 92, 1208, 10.1111/j.1551-2916.2009.03074.x Kim, 2010, Effects of preheating of powder before spark plasma sintering of transparent MgAl2O4 spinel, Journal of the American Ceramic Society, 93, 2158, 10.1111/j.1551-2916.2010.03699.x Bernard-Granger, 2009, Influence of graphite contamination on the optical properties of transparent spinel obtained by spark plasma sintering, Scripta Materialia, 60, 164, 10.1016/j.scriptamat.2008.09.027 Goldstein, 2008, Transparent MgAl2O4 spinel from a powder prepared by flame spray pyrolysis, Journal of the American Ceramic Society, 91, 4141, 10.1111/j.1551-2916.2008.02788.x Sutorik, 2012, The production of transparent MgAl2O4 ceramic using calcined powder mixtures of Mg(OH)2 and gamma-Al2O3 or AlOOH, International Journal of Applied Ceramic Technology, 9, 575, 10.1111/j.1744-7402.2011.02679.x Ping, 2001, Magnesium aluminate (MgAl2O4) spinel produced via self-heat-sustained (SHS) technique, Materials Research Bulletin, 36, 1417, 10.1016/S0025-5408(01)00622-5 Krell, 2011, Effects and elimination of nanoporosity in transparent sintered spinel (MgAl2O4), vol. 8016 Harris, 2005, History of development of polycrystalline optical spinel in the U.S., vol. 5786, 1 Gledhill, 2012, Strengthening of transparent spinel/Si3N4 nanocomposites, Acta Materialia, 60, 1570, 10.1016/j.actamat.2011.11.053 McCauley, 2009, AlON: a brief history of its emergence and evolution, Journal of the European Ceramic Society, 29, 223, 10.1016/j.jeurceramsoc.2008.03.046 McCauley, 1979, Phase-relations and reaction sintering of transparent cubic aluminum oxynitride spinel (ALON, Journal of the American Ceramic Society, 62, 476, 10.1111/j.1151-2916.1979.tb19109.x Kim, 1998, Sintering, microstructure, and mechanical properties of AlON-AlN particulate composites, British Ceramic Transactions, 97, 97 Zientara, 2007, ALON-based materials prepared by SHS technique, Journal of the European Ceramic Society, 27, 775, 10.1016/j.jeurceramsoc.2006.04.008 Rafaniello, 1981, Preparation of sinterable cubic aluminum oxynitride by the carbothermal nitridation of aluminum-oxide, Journal of the American Ceramic Society, 64, C128, 10.1111/j.1151-2916.1981.tb10232.x Yuan, 2010, Synthesis of gamma-AlON powders by a combinational method of carbothermal reduction and solid-state reaction, Journal of the American Ceramic Society, 93, 22, 10.1111/j.1551-2916.2009.03380.x Zientara, 2007, Dielectric properties of aluminium nitride-gamma-ALON materials, Journal of the European Ceramic Society, 27, 4051, 10.1016/j.jeurceramsoc.2007.02.093 Zhang, 2011, The pressureless sintering and mechanical properties of AlON ceramic, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 528, 6259, 10.1016/j.msea.2011.04.072 Clay, 2006, Effect of LiAl5O8 additions on the sintering and optical transparency of LiAlON, Journal of the European Ceramic Society, 26, 1351, 10.1016/j.jeurceramsoc.2005.01.056 Kumar, 2010, Processing of aluminum oxynitride through aqueous colloidal forming techniques, Journal of the American Ceramic Society, 93, 429, 10.1111/j.1551-2916.2009.03418.x Sahin, 2012, Preparation of AlON ceramics via reactive spark plasma sintering, Journal of the European Ceramic Society, 32, 925, 10.1016/j.jeurceramsoc.2011.10.043 Qi, 2011, Preparation and light transmission properties of AlON ceramics by the two-step method with nanosized Al2O3 and AlN, Metallurgical Materials Transactions A, Physical Metallurgy and Material, 42A, 4075, 10.1007/s11661-011-0809-6 Yuan, 2011, Fabrication of transparent AlON ceramics by solid-state reaction sintering, Journal of Inorganic Materials, 26, 499, 10.3724/SP.J.1077.2011.00499 Choi, 2001, Microstructural evolution of transparent PLZT ceramics sintered in air and oxygen atmospheres, Journal of the American Ceramic Society, 84, 1465, 10.1111/j.1151-2916.2001.tb00861.x Haertling, 1971, Improved hot-pressed electroptic ceramics in (Pb, La)(Zr, Ti)3 system, Journal of the American Ceramic Society, 54, 303, 10.1111/j.1151-2916.1971.tb12296.x Shannigrahi, 2000, Structural and dielectric properties of sol-gel derived PLZT (x/60/40), Journal of Electroceramics, 5, 201, 10.1023/A:1026571210431 Kong, 2001, Preparation and characterization of translucent PLZT8/65/35 ceramics from nano-sized powders produced by a high-energy ball-milling process, Materials Research Bulletin, 36, 1675, 10.1016/S0025-5408(01)00654-7 Cerqueira, 1998, Synthesis and characterization of PLZT (9/65/35) by the Pechini method and partial oxalate, Materials Letters, 35, 166, 10.1016/S0167-577X(97)00240-1 Abe, 2002, Fabrication of optically transparent lead lanthanum zirconate titanate ((Pb, La)(Zr, Ti)O−3) ceramics by a three-stage-atmosphere-sintering technique, Journal of the American Ceramic Society, 85, 473, 10.1111/j.1151-2916.2002.tb00113.x Kong, 2002, Transparent lead lanthanum zirconate titanate ceramics derived from oxide mixture via a repeated annealing process, Journal of Materials Research, 17, 929, 10.1557/JMR.2002.0136 Qiao, 2011, Optical characteristics of transparent PMNT ceramic and its application at high speed electro-optic switch, Optics Communications, 284, 3886, 10.1016/j.optcom.2011.04.063 Li KK. Electro-optic ceramic material and device, PMN-PT. China Patent No. 5/6/2002, 2002. Colla, 1995, Long-time relaxation of the dielectric response in lead magnoniobate, Physical Review Letters, 74, 1681, 10.1103/PhysRevLett.74.1681 Shvartsman, 2005, Fatigue-induced evolution of domain structure in ferroelectric lead zirconate titanate ceramics investigated by piezoresponse force microscopy, Journal of Applied Physics, 98, 10.1063/1.2126782 Chen, 2006, Field-induced effect in the <111>-oriented 0.70Pb(Mg1/3Nb2/3)O3–0.30PbTiO3 single crystals, Materials Letters, 60, 1634, 10.1016/j.matlet.2005.11.081 Zhang, 2005, Piezoelectric materials for high power, high temperature applications, Materials Letters, 59, 3471, 10.1016/j.matlet.2005.06.016 Ursic, 2011, Pb(Mg1/3Nb2/3)O3–PbTiO3 (PMN–PT) material for actuator applications, Smart Materials and Structures, 2011, 452901 Park, 1997, Ultrahigh strain and piezoelectric behavior in relaxor based ferroelectric single crystals, Journal of Applied Physics, 82, 1804, 10.1063/1.365983 Tong, 2009, Optical properties of PMN–PT thin films prepared using pulsed laser deposition, Applied Surface Science, 255, 7995, 10.1016/j.apsusc.2009.04.197 Wei, 2012, Optical characteristics of Er3+-doped PMN–PT transparent ceramics, Ceramics International, 38, 3397, 10.1016/j.ceramint.2011.12.051 Nomura, 1979, Electrostriction in Pb(Zn1/3Nb2/3)O3, Materials Research Bulletin, 14, 769, 10.1016/0025-5408(79)90136-3 Schneider, 2008, Structure and properties of mullite – a review, Journal of the American Ceramic Society, 28, 329, 10.1016/j.jeurceramsoc.2007.03.017 Aramaki, 1962, Revised phase diagram for the system Al2O3–SiO2, Journal of the American Ceramic Society, 45, 229, 10.1111/j.1151-2916.1962.tb11133.x Aksay, 1991, Mullite for structural, electronic, and optical applications, Journal of the American Ceramic Society, 74, 2343, 10.1111/j.1151-2916.1991.tb06768.x Mazdiyas, 1972, Synthesis and mechanical properties of stoichiometric aluminum silicate (mullite), Journal of the American Ceramic Society, 55, 548, 10.1111/j.1151-2916.1972.tb13434.x Prochazka, 1983, Infrared-transparent mullite ceramic, Journal of the American Ceramic Society, 66, 874, 10.1111/j.1151-2916.1983.tb11004.x Ohashi, 1987, Preparation of translucent mullite ceramics, Journal of Materials Science Letters, 6, 528, 10.1007/BF01739274 Hatch, 1964, Hot-pressed polycrystalline CaF2–Dy2+ laser (77 °K threshold of polycrystal 24.6 J of single crystal 25.4 J E), Applied Physics Letters, 5, 153, 10.1063/1.1754094 Greskovi, 1974, Improved polycrystalline ceramic lasers, Journal of Applied Physics, 45, 4495, 10.1063/1.1663077 Sato, 2003, Spectral parameters of Nd3+-ion in the polycrystalline solid-solution composed of Y3Al5O12 and Y3Sc2Al3O12, Japanese Journal of Applied Physics Part 1, 42, 5071, 10.1143/JJAP.42.5071 Saikawa, 2004, Absorption, emission spectrum properties, and efficient laser performances of Yb:Y3ScAl4O12 ceramics, Applied Physics Letters, 85, 1898, 10.1063/1.1791339 Lu, 2002, Neodymium doped yttrium aluminum garnet (Y3Al5O12) nanocrystalline ceramics – a new generation of solid state laser and optical materials, Journal of Alloys and Compounds, 341, 220, 10.1016/S0925-8388(02)00083-X Ikesue, 2006, Synthesis and performance of advanced ceramic lasers, Journal of the American Ceramic Society, 89, 1936, 10.1111/j.1551-2916.2006.01043.x Yoshida K, Ikesue A, Yamamoto T. Sutureless bonded single crystal and ceramic composite lasers. In: CLEO/IQEC technical conference, San Francisco, May 20, 2004, 2004. Yoshida K, Ikesue A, Okamoto Y. All ceramic composite with layer by layer and clad-core structure by advanced ceramic processing. In: CLEO/IQEC technical conference, San Francisco, May 18, 2004. 2004. Boulesteix, 2010, Light scattering by pores in transparent Nd:YAG ceramics for lasers: correlations between microstructure and optical properties, Optics Express, 18, 14992, 10.1364/OE.18.014992 Peters, 2002, Growth of high-melting sesquioxides by the heat exchanger method, Journal of Crystal Growth, 237, 879, 10.1016/S0022-0248(01)02054-1 Brenier, 2001, Overview of the best Yb3+-doped laser crystals, Journal of Alloys and Compounds, 323, 210, 10.1016/S0925-8388(01)01112-4 Sanghera, 2011, Transparent ceramics for high-energy laser systems, Optical Materials, 33, 511, 10.1016/j.optmat.2010.10.038 Lu, 2000, Highly efficient 2% Nd:yttrium aluminum garnet ceramic laser, Applied Physics Letters, 77, 3707, 10.1063/1.1331091 Patterson, 2003, Spinel: gaining momentum in optical applications, vol. 5078, 71 Goldman, 2001, Recent advances in aluminum oxynitride (ALON (TM)) optical ceramic, vol. 4375, 71 Askinazi, 2001, Development of large aperture, monolithic sapphire optical windows, vol. 4375, 1 Patterson, 2003, Spinel armor – clearly the way to go, vol. 24, 441 Klein, 2007, Figures of merit for high-energy laser-window materials: thermal lensing and thermal stresses – art. no. 640308, vol. 6403, 40308 Moynihan, 1998, Chemical durability of fluoride glasses, Materials Science Forum, 32–33, 243 Bayya, 2005, Vis-IR transmitting window materials, SPIE, 5786, 262, 10.1117/12.603753 Beyer, 1999, Evaluation of ALON for cannon window application, vol. 3705, 113 Goldman, 2011, ALON (R) optical ceramic transparencies for window, dome and transparent armor applications, vol. 8016 de Groot, 1986 Seinen PA. High intensity discharge lamp with ceramic envelopes: a key technology for the lighting future. In: Proc. 7th int. sym. sci. & tech. of light sources, 1995. pp. 101–109. Juengst S, Lang D, Galvez M. Arc tubes for improved isothermal operation. In: Proc. 10th int. sym. sci. & tech. of light sources, 2004. pp. 115–124. Krell, 2007, Transparent ceramics for structural applications: part 2: fields of applications, CFI-Ceramic Forum International, 84, E50 Niimi N. Translucent ceramic, a method of producing the same and discharge vessels. China Patent No. 15.12. 2005, 2005. Krell, 2007, Transparent ceramics for structural applications: part1: physics of light transmission and technological consequences, CFI-Ceramic Forum International, 84, E41 Wei, 2009, Transparent ceramics for lighting, Journal of the European Ceramic Society, 29, 237, 10.1016/j.jeurceramsoc.2008.03.018 Van Bruggen MPB, Apetz RTA, Kop TA, Krell A, Hutzler T. Transparent polycrystalline aluminum oxide. China Patent No. 25.06.2005, 2005. Van Bruggen MPB, Apetz RTA, Kop TA, Krell A, Hutzler T. Transparent polycrystalline aluminum oxide. China Patent No. 10.11.2005, 2005. Wei, 2005, Transparent ceramic lamp envelope materials, Journal of Physics D: Applied Physics, 38, 3057, 10.1088/0022-3727/38/17/S07 Yanagida, 2007, Improvement of ceramic YAG(Ce) scintillators to (YGd)3Al5O12(Ce) for gamma-ray detectors, Nuclear Instruments & Methods in Physics Research Section A-Accelerators Spectrometers Detectors and Associated Equipment, 579, 23, 10.1016/j.nima.2007.04.173 Cherepy, 2007, Cerium-doped single crystal and transparent ceramic lutetium aluminum garnet scintillators, Nuclear Instruments & Methods in Physics Research Section A-Accelerators Spectrometers Detectors and Associated Equipment, 579, 38, 10.1016/j.nima.2007.04.009 Bartram, 2004, Hole traps in Lu2O3:Eu ceramic scintillators. II. Radioluminescence and thermoluminescence, Journal of Luminescence, 106, 169, 10.1016/j.jlumin.2003.09.008 Cherepy, 2010, Transparent ceramic scintillators for gamma spectroscopy and radiography, vol. 7805 Krell, 2009, Transmission physics and consequences for materials selection, manufacturing, and applications, Journal of the European Ceramic Society, 29, 207, 10.1016/j.jeurceramsoc.2008.03.025