Transforming 3D-printed mesostructures into multimodal sensors with nanoscale conductive metal oxides

Meza, 2014, Strong, lightweight, and recoverable three-dimensional ceramic nanolattices, Science, 345, 1322, 10.1126/science.1255908 Wendy Gu, 2015, Ultra-strong architected Cu meso-lattices, Extreme Mech. Lett., 2, 7, 10.1016/j.eml.2015.01.006 Murphy, 2014, 3D bioprinting of tissues and organs, Nat. Biotechnol., 32, 773, 10.1038/nbt.2958 Zhang, 2019, Three-dimensional (3D) printed scaffold and material selection for bone repair, Acta Biomater., 84, 16, 10.1016/j.actbio.2018.11.039 Ntouanoglou, 2018, 4D printing prospects for the aerospace industry: a critical review, Proced. Manufacturing, 18, 120, 10.1016/j.promfg.2018.11.016 Hu, 2020, A 3D-printed molecular ferroelectric metamaterial, Proc. Natl. Acad. Sci. U S A, 117, 27204, 10.1073/pnas.2013934117 Jackson, 2018, Field responsive mechanical metamaterials, Sci. Adv., 4, eaau6419, 10.1126/sciadv.aau6419 Zhang, 2021, 3D-Printed multi-channel metal lattices enabling localized electric-field redistribution for dendrite-free aqueous Zn ion batteries, Adv. Energy Mater., 11, 2003927, 10.1002/aenm.202003927 Boley, 2019, Shape-shifting structured lattices via multimaterial 4D printing, Proc. Natl. Acad. Sci. U S A, 116, 20856, 10.1073/pnas.1908806116 Beck, 2021, Inertially enhanced mass transport using 3D-printed porous flow-through electrodes with periodic lattice structures, Proc. Natl. Acad. Sci. U S A, 118, 10.1073/pnas.2025562118 Ge, 2020, Projection micro stereolithography based 3D printing and its applications, Int. J. Extrem. Manuf., 2, 022004, 10.1088/2631-7990/ab8d9a Hahn, 2020, Rapid assembly of small materials building blocks (voxels) into large functional 3D metamaterials, Adv. Funct. Mater., 30, 1907795, 10.1002/adfm.201907795 Manapat, 2017, 3D printing of polymer nanocomposites via stereolithography, Macromolecular Mater. Eng., 302, 1600553, 10.1002/mame.201600553 Eckel, 2016, Additive manufacturing of polymer-derived ceramics, Science, 351, 58, 10.1126/science.aad2688 Su, 2019, Metallization of 3D printed polymers and their application as a fully functional water-splitting system, Adv. Sci., 6, 1801670, 10.1002/advs.201801670 Egorov, 2020, Evolution of 3D printing methods and materials for electrochemical energy storage, Adv. Mater., 32, 2000556, 10.1002/adma.202000556 Song, 2018, Fully controllable design and fabrication of three-dimensional lattice supercapacitors, ACS Appl. Mater. Inter., 10, 39839, 10.1021/acsami.8b15731 Song, 2020, 3D ink-extrusion printing and sintering of Ti, Ti-TiB and Ti-TiC microlattices, Additive Manufacturing, 35, 101412, 10.1016/j.addma.2020.101412 Saleh, 2021, 3D printed three-dimensional metallic microlattices with controlled and tunable mechanical properties, Additive Manufacturing, 39, 101856, 10.1016/j.addma.2021.101856 Shimizu, 1999, Basic aspects and challenges of semiconductor gas sensors, MRS Bull., 24, 18, 10.1557/S0883769400052465 Nakatsuka, 2018, Aptamer–field-effect transistors overcome Debye length limitations for small-molecule sensing, Science, 362, 319, 10.1126/science.aao6750 Egan, 2017, Computationally designed lattices with tuned properties for tissue engineering using 3D printing, PLoS One, 12, e0182902, 10.1371/journal.pone.0182902 Zheng, 2014, Ultralight, ultrastiff mechanical metamaterials, Science, 344, 1373, 10.1126/science.1252291 Buj-Corral, 2019, Influence of print orientation on surface roughness in fused deposition modeling (FDM) processes, Materials, 12, 3834, 10.3390/ma12233834 Zhao, 2020, Fabricating an effective calcium zirconate layer over the calcia grains via binder-jet 3D-printing for improving the properties of calcia ceramic cores, Additive Manufacturing, 32, 101025, 10.1016/j.addma.2019.101025 Cho, 2020, Area-selective atomic layer deposition patterned by electrohydrodynamic jet printing for additive manufacturing of functional materials and devices, ACS Nano, 14, 17262, 10.1021/acsnano.0c07297 Chawla, 2019, Fracture mechanics and oxygen gas barrier properties of Al2O3/ZnO nanolaminates on PET deposited by atomic layer deposition, Nanomaterials, 9, 88, 10.3390/nano9010088 Yang, 2017, Reversible and irreversible reactions of Trimethylaluminum with common organic functional groups as a model for molecular layer deposition and vapor phase infiltration, Adv. Mater. Inter., 4, 1700237, 10.1002/admi.201700237 Parsons, 2013, Mechanisms and reactions during atomic layer deposition on polymers, Coord. Chem. Rev., 257, 3323, 10.1016/j.ccr.2013.07.001 Kavan, 2017, Ultrathin buffer layers of SnO2 by atomic layer deposition: perfect blocking function and thermal stability, J. Phys. Chem. C, 121, 342, 10.1021/acs.jpcc.6b09965 Lim, 2008, ZnO thin films prepared by atomic layer deposition and rf sputtering as an active layer for thin film transistor, Thin Solid Films, 516, 1523, 10.1016/j.tsf.2007.03.144 Beh, 2018, Optimization of ALD-ZnO thin films toward higher conductivity, Physica Status Solidi (a), 215, 1700880, 10.1002/pssa.201700880 Farva, 2021, Growth temperature-dependent morphological, optical, and electrical study of SnO2 thin film by atomic layer deposition, Mater. Chem. Phys., 267, 124584, 10.1016/j.matchemphys.2021.124584 Van Mieghem, 2017, Pseudoinverse of the Laplacian and best spreader node in a network, Phys. Rev. E, 96, 032311, 10.1103/PhysRevE.96.032311 Melnikov, 2018, Modeling the electrical properties of three-dimensional printed meshes with the theory of resistor lattices, Phys. Rev. E, 97, 043307, 10.1103/PhysRevE.97.043307 Liu, 2019, Three-dimensional ordered porous electrode materials for electrochemical energy storage, NPG Asia Mater., 11, 1, 10.1038/s41427-019-0112-3 Lee, 2019, 3D printing for electrocatalytic applications, Joule, 3, 1835, 10.1016/j.joule.2019.06.010 Calignano, 2015, Additive manufacturing of a microbial fuel cell—a detailed study, Scientific Rep., 5, 17373, 10.1038/srep17373 Wang, 2008, Fabrication of a SnO2 nanowire gas sensor and sensor performance for hydrogen, J. Phys. Chem. C, 112, 6643, 10.1021/jp8003147 Wang, 2021, Prediction of effective thermal conductivity of porous lattice structures and validation with additively manufactured metal foams, Appl. Therm. Eng., 187, 116558, 10.1016/j.applthermaleng.2021.116558 Gomes, 2019, IoT-enabled gas sensors: technologies, applications, and opportunities, J. Sensor Actuator Networks, 8, 57, 10.3390/jsan8040057 Al-Hardan, 2010, ZnO thin films for VOC sensing applications, Vacuum, 85, 101, 10.1016/j.vacuum.2010.04.009 Teimoori, 2017, Investigation of sensitivity and selectivity of ZnO thin film to volatile organic compounds, J. Theor. Appl. Phys., 11, 157, 10.1007/s40094-017-0253-0 Kulandaisamy, 2016, Nanostructured Cerium-doped ZnO thin film – a breath sensor, Ceramics Int., 42, 18289, 10.1016/j.ceramint.2016.08.156 Acuautla, 2014, Ozone flexible sensors fabricated by photolithography and laser ablation processes based on ZnO nanoparticles, Sensors Actuators B: Chem., 203, 602, 10.1016/j.snb.2014.07.010 Bai, 2019, Debye-length controlled gas sensing performances in NiO@ZnO p-n junctional core–shell nanotubes, J. Phys. D: Appl. Phys., 52, 285103, 10.1088/1361-6463/ab182f Shankar, 2017, Monomer: design of ZnO nanostructures (nanobush and nanowire) and their room-temperature ethanol vapor sensing signatures, ACS Appl. Mater. Inter., 9, 38135, 10.1021/acsami.7b11561 Kim, 2019, Realization of H2S sensing by Pd-functionalized networked CuO nanowires in self-heating mode, Sensors Actuators B: Chem., 299, 126965, 10.1016/j.snb.2019.126965 Mailly, 2001, Anemometer with hot platinum thin film, Sensors Actuators A: Phys., 94, 32, 10.1016/S0924-4247(01)00668-9 Talbi, 2015, A micro-scale hot wire anemometer based on low stress (Ni/W) multi-layers deposited on nano-crystalline diamond for air flow sensing, J. Micromech. Microeng., 25, 125029, 10.1088/0960-1317/25/12/125029 Arretche, 2018, On the interrelationship between static and vibration mitigation properties of architected metastructures, Front. Mater., 10.3389/fmats.2018.00068 Bagheri, 2018, Determination of the elasticity modulus of 3D-printed octet-truss structures for use in porous prosthesis implants, Materials, 11, 2420, 10.3390/ma11122420 Joung, 2021, 3D-Printed load cell using nanocarbon composite strain sensor, Sensors, 21, 3675, 10.3390/s21113675 Inomata, 2017, Piezoresistive property of an aluminum-doped zinc oxide thin film deposited via atomic-layer deposition for microelectromechanical system/nanoelectromenchanical system applications, IEEJ Trans. Electr. Electron. Eng., 12, S120, 10.1002/tee.22570 Cardoso, 2014, Evaluation of piezoresistivity properties of sputtered ZnO thin films, Mat. Res., 17, 588, 10.1590/S1516-14392014005000080 Tuyaerts, 2017, Internal stress and opto-electronic properties of ZnO thin films deposited by reactive sputtering in various oxygen partial pressures, J. Appl. Phys., 122, 155306, 10.1063/1.4996453