Transformation of CuO and Cu2O particles into CuxS within the polymeric matrix of anion exchangers, and its structural and morphological implications

Reactive and Functional Polymers - Tập 192 - Trang 105734 - 2023
Elżbieta Kociołek-Balawejder1, Anna Gibas2, Agnieszka Baszczuk2, Marek Jasiorski2, Irena Jacukowicz-Sobala1
1Department of Chemical Technology, Wroclaw University of Economics and Business, 118/120 Komandorska St., 53-345 Wrocław, Poland
2Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, 25 M. Smoluchowskiego St, 50-370 Wrocław, Poland

Tài liệu tham khảo

Chandrasekaran, 2019, Recent advances in metal sulfides: from controlled fabrication to electrocatalytic, photocatalytic and photoelectrochemical water splitting and beyond, Chem. Soc. Rev., 48, 4178, 10.1039/C8CS00664D Jamal, 2023, Review of metal sulfide nanostructures and their applications, ACS Appl. Nano Mater, 6, 7077, 10.1021/acsanm.3c00417 Parsons, 2023, The application of transition metal sulfide nanomaterials and their composite nanomaterials in the electrocatalytic reduction of CO2: a review, Appl. Sci., 13, 3023, 10.3390/app13053023 Grilc, 2014, Hydrodeoxygenation and hydrocracking of solvolysed lignocellulosic biomass by oxide, reduced and sulphide form of NiMo, Ni, Mo and Pd catalysts, Appl. Catal. B-Environ., 150-151, 275, 10.1016/j.apcatb.2013.12.030 Gupta, 2022, A review of hydrogen production processes by photocatalytic water splitting – from atomistic catalysis design to optimal reactor engineering, Int. J. Hydrogen Energ., 47, 33282, 10.1016/j.ijhydene.2022.07.210 He, 2022, Recent progress in transition-metal sulfide catalyst regulation for improved oxygen evolution reaction, Energy Fuel, 36, 6675, 10.1021/acs.energyfuels.2c01429 Liu, 2022, Defect and interface engineering in metal sulfide catalysts for the electrocatalytic nitrogen reduction reaction: a review, J. Mater. Chem. A, 10, 6927, 10.1039/D2TA00070A Prasnikar, 2022, Sulfur poisoning, water vapour and nitrogen dilution effects on copper-based catalyst dynamics, stability and deactivation during CO2 reduction reaction to methanol, React. Chem. Eng., 7, 1073, 10.1039/D1RE00486G Wang, 2021, Recent advances in transition metal sulfide-based bifunctional electrocatalysts for overall water splitting, J. Mater. Chem. A, 9, 5320, 10.1039/D0TA12152E Ayodhya, 2018, A review on recent advances in photodegradation of dyes using doped and heterojunction based semiconductor metal sulfide nanostructures for environmental protection, Mater. Today Energy, 9, 83, 10.1016/j.mtener.2018.05.007 Munyai, 2021, Green derived metal sulphides as photocatalysts for waste water treatment. A review, Curr. Res. Green Sustain. Chem, 4, 100163, 10.1016/j.crgsc.2021.100163 Gadore, 2023, Metal sulphides and their heterojunctions for photocatalytic degradation of organic dyes – a comprehensive review, Environ. Sci. Pollut. Res., 30, 90410, 10.1007/s11356-023-28753-w Kromah, 2021, Aqueous adsorption of heavy metals on metal sulfide nanomaterials: synthesis and application, Water, 13, 1843, 10.3390/w13131843 Manos, 2016, Metal sulfide ion exchangers: superior sorbents for the capture of toxic and nuclear waste-related metal ions, Chem. Soc., 7, 4804 Shamraiz, 2016, Fabrication and applications of copper sulfide (CuS) nanostructures, J. Solid State Chem., 238, 25, 10.1016/j.jssc.2016.02.046 Goel, 2014, Synthesis and biomedical applications of copper sulfide nanoparticles: from sensor to theranostics, Small, 10, 631, 10.1002/smll.201301174 Coughlan, 2017, Compound copper chalcogenide nanocrystals, Chem. Rev., 117, 5865, 10.1021/acs.chemrev.6b00376 Zhang, 2020, Preparation of nano-copper sulfide and its adsorption properties for 17α-ethynyl estradiol, Nanoscale Lett. Res., 15, 48, 10.1186/s11671-020-3274-6 Basu, 2010, Evolution of hierarchical hexagonal stacked plates of CuS from liquid-liquid interface and its photocatalytic application for oxidative degradation of different dyes under indoor lighting, Environ. Sci. Technol., 44, 6313, 10.1021/es101323w Kundu, 2014, Controlled synthesis and catalytic activity of copper sulfide nanostructured assemblies with different morphologies, ACS Appl. Mater. Interfaces, 6, 1823, 10.1021/am404829g Roy, 2015, Nanostructured copper sulfides: synthesis, properties and applications, CrystEngComm, 17, 7801, 10.1039/C5CE01304F Sun, 2017, Diversified copper sulfide (Cu2-xS) micro−/nanostructures: a comprehensive review on synthesis, modifications and applications, Nanoscale, 9, 11357, 10.1039/C7NR03828C Isac, 2019, Copper sulfide based heterojunctions as photocatalysts for dyes photodegradation, Front. Chem., 7, 694, 10.3389/fchem.2019.00694 Wan, 2019, One-step transformation from Cu2S nanocrystal to CuS nanocrystal with photocatalytic properties, ChemistrySelect, 7512, 10.1002/slct.201901387 Baláž, 2018, Mechanochemistry of copper sulfides: characterization, surface oxidation and photocatalytic activity, J. Alloys Compd., 746, 576, 10.1016/j.jallcom.2018.02.283 Jiang, 2020, Controllable preparation, formation mechanism and photocatalytic performance of copper base sulfide nanoparticles, Mater. Chem. Phys., 254, 123504, 10.1016/j.matchemphys.2020.123504 Ray, 2015, Evolution of tubular copper sulfide nanostructures from copper(I)-metal organic precursor: a superior platform for the removal of Hg(II) and Pb(II) ions, RSC Adv., 5, 12446, 10.1039/C4RA09999K Sharifpour, 2018, Isotherms and kinetics study of ultrasound-assisted adsorption of malachite green and Pb2+ ions from aqueous samples by copper sulfide nanorods loaded on activated carbon: experimental design optimization, Ultrason. Sonochem., 40, 373, 10.1016/j.ultsonch.2017.07.030 Hu, 2019, Unprecedented selectivity and rapid uptake of CuS nanostructures toward Hg(II) ions, ACS Appl. Mater. Interfaces, 11, 19200, 10.1021/acsami.9b04641 Yang, 2022, Fast and effective uptake of mercury(II) from aqueous solution using waste carbon black-supported CuS composites and reutilization of spent adsorbent for photodegradation of rhodamine B, J. Mol. Liq., 345, 118251, 10.1016/j.molliq.2021.118251 Yao, 2019, Low cost and rapid fabrication of copper sulfides nanoparticles for selective and efficient capture of noble metal ions, Chem. Eng. J., 373, 1168, 10.1016/j.cej.2019.05.070 Prathna, 2018, Nanoparticles in household level water treatment: an overview, Sep. Purif. Technol., 199, 260, 10.1016/j.seppur.2018.01.061 Simeonidis, 2016, Inorganic engineering nanoparticles in drinking water treatment: a critical review, Environ. Sci. Water Res. Technol., 2, 43, 10.1039/C5EW00152H SenGupta, 2017 Jacukowicz-Sobala, 2019, Evaluation of hybrid anion exchanger containing cupric oxide for As(III) removal from water, J. Hazard. Mater., 370, 117, 10.1016/j.jhazmat.2018.07.094 Jacukowicz-Sobala, 2022, Photocatalytically-assisted oxidative adsorption of As(III) using sustainable multifunctional composite material – Cu2O doped anion exchanger, J. Hazard. Mater., 431, 128529, 10.1016/j.jhazmat.2022.128529 Jacukowicz-Sobala, 2015, Synthesis and characterization of hybrid materials containing iron oxide for removal of sulfides from water, J. Colloid Interface Sci., 460, 154, 10.1016/j.jcis.2015.08.035 Wilk, 2020, Removal of sulfides from water using a hybrid ion exchanger containing manganese(IV) oxide, Sep. Purif. Technol., 231, 115882, 10.1016/j.seppur.2019.115882 Kociołek-Balawejder, 2002, A macromolecular N,N-chlorosulfonamide as oxidant for residual sulfides, Eur. Polym. J., 38, 953, 10.1016/S0014-3057(01)00252-X Kociołek-Balawejder, 2022, A copolymer with N-chlorosulfonamide pendat groups as oxidant for residual sulfides, React. Funct. Polym., 52, 89, 10.1016/S1381-5148(02)00084-6 Kociołek-Balawejder, 2017, CuO-loaded macroreticular anion exchange hybrid polymers obtained via tetrachlorocuprate(II) ionic form, Int. J. Polymer Sci., 4574397 Kociołek-Balawejder, 2017, CuO and Cu2(OH)3Cl loaded gel-type anion exchange hybrid polymers obtained via tetrachlorocuprate ionic form, J. Environ. Chem. Eng., 5, 5668, 10.1016/j.jece.2017.10.055 Kociołek-Balawejder, 2020, Deposition of spherical and bracelet-like Cu2O nanoparticles within the matrix of anion exchangers via reduction of tetrachlorocuprate anions, J. Environ. Chem. Eng., 8, 103722, 10.1016/j.jece.2020.103722 Ma, 2014, Sulfidation of copper oxide nanoparticles and properties of resulting copper sulfide, Environ. Sci. Nano, 1, 347, 10.1039/C4EN00018H Gogos, 2017, Sulfidation kinetics of copper oxide nanoparticles, Environ. Sci. Nano, 4, 1733, 10.1039/C7EN00309A Kociołek-Balawejder, 2023, Multifunctional composite materials based on anion exchangers modified with copper compounds – A review of their synthesis methods, characteristics and applications, Polymers, 15, 3606, 10.3390/polym15173606 Gainov Pejjai, 2020, Phase controllable synthesis of CuS nanoparticles by chemical co-precipitation method: effect of copper precursors on the properties of CuS, Mater. Chem. Phys., 239, 122030, 10.1016/j.matchemphys.2019.122030 Luther, 2002, Aqueous copper sulfide clusters as intermediates during copper sulfide formation, Environ. Sci. Technol., 36, 394, 10.1021/es010906k Hurma, 2016, XRD Raman analysis and optical properties of CuS nanostructured film, Optik, 127, 6000, 10.1016/j.ijleo.2016.04.019 Kumar, 2011, An elegant room temperature procedure for the precise control of composition in the Cu-S system, Inorg. Chem., 50, 9204, 10.1021/ic201133a Frost, 2009, Raman spectroscopic study of the sulfite-bearing minerals scotlandite, hannebachite and orschallite: implications for the desulfation of soils, J. Raman Spectrosc., 40, 244, 10.1002/jrs.2089 Martens, 2003, Raman spectroscopic study of the basic copper sulphates-implications for copper corrosion and bronze disease, J. Raman Spectrosc., 34, 145, 10.1002/jrs.969 Mikhlin, 2020, Formation, evolution and characteristics of copper sulfide nanoparticles in the reactions of aqueous cupric and sulfide ions, Mater. Chem. Phys., 255, 123600, 10.1016/j.matchemphys.2020.123600 Pratt, 1994, X-ray photoelectron and Auger electron spectroscopic studies of pyrrhotite and mechanism of air oxidation, Geochim. Cosmochim. Acta, 58, 827, 10.1016/0016-7037(94)90508-8 Hayez, 2004, XPS study of the atmospheric corrosion of copper alloys of archaeological interest, Surf. Interface Anal., 36, 876, 10.1002/sia.1790 Stenlid, 2017, Computational analysis of the early stage of cuprous oxide sulphidation: a top-down process, Corros. Eng. Sci. Technol., 52, 50, 10.1080/1478422X.2017.1284393 Luther, 2011, Thermodynamics and kinetics of sulfide oxidation by oxygen: a look at inorganically controlled reactions and biologically mediated processes in the environment, Front. Microbiol., 2, 62, 10.3389/fmicb.2011.00062 Zhu, 2009, Fast synthesis, formation mechanism, and control of shell thickness of CuS hollow spheres, Inorg. Chem., 48, 7099, 10.1021/ic900201p Yang, 2009, Controlled synthesis of cuprous oxide nanospheres and copper sulfide hollow nanospheres, J. Phys. Chem. Solids, 70, 840, 10.1016/j.jpcs.2009.04.004 Toe, 2018, Transformation of cuprous oxide into hollow copper sulfide cubes for photocatalytic hydrogen generation, J. Phys. Chem. C, 122, 14072, 10.1021/acs.jpcc.8b01169