Towards integrated gasification and fuel cell operation with carbon capture: Impact of fuel gas on anode materials

Wang, 2011, A review on solid oxide fuel cell models, Int J Hydrogen Energy, 36, 7212, 10.1016/j.ijhydene.2011.03.051 Zhang, 2010, A review of integration strategies for solid oxide fuel cells, J Power Sources, 195, 685, 10.1016/j.jpowsour.2009.07.045 Di Carlo, 2013, Process simulation of a SOFC and double bubbling fluidized bed gasifier power plant, Int J Hydrogen Energy, 38, 532, 10.1016/j.ijhydene.2012.09.059 El-Emam, 2012, Energy and exergy analyses of an integrated SOFC and coal gasification system, Int J Hydrogen Energy, 37, 1689, 10.1016/j.ijhydene.2011.09.139 Athanasiou, 2007, From biomass to electricity through integrated gasification/SOFC system-optimization and energy balance, Int J Hydrogen Energy, 32, 337, 10.1016/j.ijhydene.2006.06.048 Sadhukhan, 2010, Performance analysis of integrated biomass gasification fuel cell (BGFC) and biomass gasification combined cycle (BGCC) systems, Chem Eng Sci, 65, 1942, 10.1016/j.ces.2009.11.022 Liese, 2010, Comparison of preanode and postanode carbon dioxide separation for IGFC systems, J Eng Gas Turbines Power, 132, 10.1115/1.4000140 Lanzini, 2014, Energy and economic performance of novel integrated gasifier fuel cell (IGFC) cycles with carbon capture, Int J Greenhouse Gas Control, 26, 169, 10.1016/j.ijggc.2014.04.028 Spallina, 2011, A SOFC-based integrated gasification fuel cell cycle with CO2 capture, J Eng Gas Turbines Power, 133, 10.1115/1.4002176 Offer, 2009, Thermodynamics and kinetics of the interaction of carbon and sulfur with solid oxide fuel cell anodes, J Am Ceram Soc, 92, 763, 10.1111/j.1551-2916.2009.02980.x Alzate-Restrepo, 2010, Carbon deposition on Ni/YSZ anodes exposed to CO/H2 feeds, J Power Sources, 195, 1344, 10.1016/j.jpowsour.2009.09.014 Mermelstein, 2011, The interaction of biomass gasification syngas components with tar in a solid oxide fuel cell and operational conditions to mitigate carbon deposition on nickel-gadolinium doped ceria anodes, J Power Sources, 196, 5027, 10.1016/j.jpowsour.2011.02.011 Jeong, 2018, Coupling SOFCs to biomass gasification–the influence of phenol on cell degradation in simulated bio-syngas. Part II–post-test analysis, Int J Hydrogen Energy, 43, 20911, 10.1016/j.ijhydene.2018.09.006 Yao, 2018, Coking-resistant NbOx-Ni-Ce0.8Sm0.2O1.9 anode material for methanol-fueled solid oxide fuel cells, Int J Hydrogen Energy, 43, 12748, 10.1016/j.ijhydene.2018.03.186 Kavurucu Schubert, 2012, Comparison of the performances of single cell solid oxide fuel cell stacks with Ni/8YSZ and Ni/10CGO anodes with H2S containing fuel, J Power Sources, 217, 364, 10.1016/j.jpowsour.2012.06.020 Laycock, 2011, Biogas as a fuel for solid oxide fuel cells and synthesis gas production: effects of ceria-doping and hydrogen sulfide on the performance of nickel-based anode materials, Dalton Trans, 40, 5494, 10.1039/c0dt01373k Boldrin, 2015, Effect of sulfur-and tar-contaminated syngas on solid oxide fuel cell anode materials, Energy Fuels, 29, 442, 10.1021/ef502085q Ricoul, 2017, Electricity production from lignocellulosic biomass by direct coupling of a gasifier and a Nickel/Yttria-stabilized Zirconia-based solid oxide fuel cell. Part 1: From gas production to direct electricity production, Int J Hydrogen Energy, 42, 21215, 10.1016/j.ijhydene.2017.06.236 Boldrin, 2016, Strategies for carbon and sulfur tolerant solid oxide fuel cell materials, incorporating lessons from heterogeneous catalysis, Chem Rev, 116, 13633, 10.1021/acs.chemrev.6b00284 Geis, 2018, Coupling SOFCs to biomass gasification-The influence of phenol on cell degradation in simulated bio-syngas. Part I: Electrochemical analysis, Int J Hydrogen Energy, 43, 20417, 10.1016/j.ijhydene.2018.07.155 Namioka, 2011, Behavior and mechanisms of Ni/ScSZ cermet anode deterioration by trace tar in wood gas in a solid oxide fuel cell, Int J Hydrogen Energy, 36, 5581, 10.1016/j.ijhydene.2011.01.165 Mermelstein, 2009, The impact of carbon formation on Ni–YSZ anodes from biomass gasification model tars operating in dry conditions, Chem Eng Sci, 64, 492, 10.1016/j.ces.2008.09.020 Mermelstein, 2009, Impact of steam on the interaction between biomass gasification tars and nickel-based solid oxide fuel cell anode materials, Energy Fuels, 23, 5042, 10.1021/ef900426g Mermelstein, 2010, The impact of steam and current density on carbon formation from biomass gasification tar on Ni/YSZ, and Ni/CGO solid oxide fuel cell anodes, J Power Sources, 195, 1657, 10.1016/j.jpowsour.2009.09.046 Doyle, 2014, Investigating the impact and reaction pathway of toluene on a SOFC running on syngas, Int J Hydrogen Energy, 39, 12083, 10.1016/j.ijhydene.2014.05.148 Pumiglia, 2017, Aggravated test of Intermediate temperature solid oxide fuel cells fed with tar-contaminated syngas, J Power Sources, 340, 150, 10.1016/j.jpowsour.2016.11.065 Liu, 2013, An experimental study of the interaction between tar and SOFCs with Ni/GDC anodes, Appl Energy, 108, 149, 10.1016/j.apenergy.2013.03.020 Lorente, 2012, Use of gasification syngas in SOFC: Impact of real tar on anode materials, Int J Hydrogen Energy, 37, 7271, 10.1016/j.ijhydene.2011.11.047 Lorente, 2013, Effect of tar fractions from coal gasification on nickel–yttria stabilized zirconia and nickel–gadolinium doped ceria solid oxide fuel cell anode materials, J Power Sources, 242, 824, 10.1016/j.jpowsour.2013.05.158 Hofmann, 2007, High temperature electrolyte supported Ni-GDC/YSZ/LSM SOFC operation on two-stage Viking gasifier product gas, J Power Sources, 173, 357, 10.1016/j.jpowsour.2007.04.073 Hofmann, 2008, Integrating biomass gasification with solid oxide fuel cells: effect of real product gas tars, fluctuations and particulates on Ni-GDC anode, Int J Hydrogen Energy, 33, 2834, 10.1016/j.ijhydene.2008.03.020 Hofmann, 2009, Operation of solid oxide fuel cell on biomass product gas with tar levels> 10 g Nm− 3, Int J Hydrogen Energy, 34, 9203, 10.1016/j.ijhydene.2009.07.040 Mastropasqua, 2017, Solid Oxide Fuel Cell short stack performance testing-part B: Operation in carbon capture applications and degradation issues, J Power Sources, 371, 238, 10.1016/j.jpowsour.2017.10.014 Spiegl, 2010, Investigation of the oxy-fuel gasification of coal in a laboratory-scale spouted-bed reactor: reactor modifications and initial results, Energy Fuels, 24, 5281, 10.1021/ef100714c Long, 2020, Fluidised bed oxy-fuel gasification of coal: Interactions between volatiles and char at varying pressures and fuel feed rates, Chemical Engineering Science: X, 8 Spiegl, 2021, Oxy-fuel co-gasification of coal and biomass for negative CO2 emissions, Fuel, 306, 10.1016/j.fuel.2021.121671 Spiegl, 2020, Production of a fuel gas by fluidised bed coal gasification compatible with CO2 capture, Fuel, 259, 10.1016/j.fuel.2019.116242 Long, 2021, Emission of species of environmental and process concern during simulated oxy-fuel gasification, Fuel, 299, 10.1016/j.fuel.2021.120886 Li, 2004 Singh, 2014, Tar removal from producer gas: a review, Res J Eng Sci, 2278, 9472 George, 2010, Fractionation of a coal tar pitch by ultra-filtration, and characterization by size exclusion chromatography, UV-fluorescence and laser desorption-mass spectroscopy, Fuel, 89, 2953, 10.1016/j.fuel.2010.04.011 Morgan, 2009, Isolation of size exclusion chromatography elution-fractions of coal and petroleum-derived samples and analysis by laser desorption mass spectrometry, Energy Fuels, 23, 6003, 10.1021/ef9006966 Morgan, 2010, Estimating molecular masses of petroleum-derived fractions: High mass (> 2000 u) materials in maltenes and asphaltenes from Maya crude oil, J Chromatogr A, 1217, 3804, 10.1016/j.chroma.2010.04.024 Berrueco, 2008, Calibration of size-exclusion chromatography columns with 1-methyl-2-pyrrolidinone (NMP)/chloroform mixtures as eluent: applications to petroleum-derived samples, Energy Fuels, 22, 3265, 10.1021/ef8003703 Morgan, 2008, Characterization of molecular mass ranges of two coal tar distillate fractions (creosote and anthracene oils) and aromatic standards by LD-MS, GC-MS, probe-MS and size-exclusion chromatography, Energy Fuels, 22, 3275, 10.1021/ef800333v Karaca, 2004, The calibration of size exclusion chromatography columns: molecular mass distributions of heavy hydrocarbon liquids, Energy Fuels, 18, 778, 10.1021/ef030178h Zhu, 2003, A review on the status of anode materials for solid oxide fuel cells, Mater Sci Eng, A, 362, 228, 10.1016/S0921-5093(03)00620-8 Finnerty, 1998, Carbon formation on and deactivation of nickel-based/zirconia anodes in solid oxide fuel cells running on methane, Catal Today, 46, 137, 10.1016/S0920-5861(98)00335-6 Diehl, 2015, Catalytic oxidation of heavy hydrocarbons over Pt/Al2O3. Oxidation of C10+ solid hydrocarbons representative of soluble organic fraction of Diesel soots, Appl Catal A, 504, 37, 10.1016/j.apcata.2014.09.031 Zhang, 2019, A study of coke formed by heavy oil volatilization/decomposition on Y-zeolite, J Anal Appl Pyrol, 141, 10.1016/j.jaap.2019.104630 Zhang, 2016, Carbon nanotubes and hydrogen production from the pyrolysis catalysis or catalytic-steam reforming of waste tyres, J Anal Appl Pyrol, 122, 490, 10.1016/j.jaap.2016.10.015 Hanaoka, 2013, Syngas production by gasification of aquatic biomass with CO2/O2 and simultaneous removal of H2S and COS using char obtained in the gasification, Biomass Bioenergy, 59, 448, 10.1016/j.biombioe.2013.08.017 Rostrupnielsen, 1971, Some principles relating to the regeneration of sulfur-poisoned nickel catalyst, J Catal, 21, 171, 10.1016/0021-9517(71)90135-7 Chen, 2020, Understanding the Coarsening and Degradation in a Nanoscale Nickel Gadolinia-Doped-Ceria Electrode for High-Temperature Applications, ACS Appl Mater Interfaces, 12, 47564, 10.1021/acsami.0c13784