Towards hierarchically ordered functional porous polymeric surfaces prepared by the breath figures approach
Tóm tắt
Từ khóa
Tài liệu tham khảo
Ostuni, 2001, Selective deposition of proteins and cells in arrays of microwells, Langmuir, 17, 2828, 10.1021/la001372o
Joannopoulos, 2008, 304
Yoshida, 1996, Novel thin film with cylindrical nanopores that open and close depending on temperature: first successful synthesis, Macromolecules, 29, 8987, 10.1021/ma961194z
Hoa, 2006, Preparation of porous materials with ordered hole structure, Adv Colloid Interface Sci, 121, 9, 10.1016/j.cis.2006.05.029
Cassagneau, 2002, Conjugated polymer inverse opals for potentiometric biosensing, Adv Mater, 14, 1837, 10.1002/adma.200290014
Hong, 2007, Photoinduced tuning of optical stop bands in azopolymer based inverse opal photonic crystals, Adv Funct Mater, 17, 2462, 10.1002/adfm.200600773
You, 2008, A facile method for fabrication of ordered porous polymer films, Macromolecules, 41, 6624, 10.1021/ma801417c
Li, 2010, Facile fabrication of honeycomb-patterned thin films of amorphous calcium carbonate and mosaic calcite, Chem Mater, 22, 3206, 10.1021/cm100363a
Xue, 2008, Porous films from transformation of polymeric sphere arrays, Adv Mater, 20, 439, 10.1002/adma.200702015
Santos, 2010, Electrosynthesis of well-organized nanoporous poly(3,4-ethylenedioxythiophene) by nanosphere lithography, Electrochem Commun, 12, 872, 10.1016/j.elecom.2010.04.008
Pietsch, 2009, Nano- and micro-sized honeycomb patterns through hierarchical self-assembly of metal-loaded diblock copolymer vesicles, Soft Matter, 5, 2188, 10.1039/B814061H
Shin, 2004, Synthesis of hierarchical titanium carbide from titania-coated cellulose paper, Adv Mater, 16, 1212, 10.1002/adma.200306661
Shin, 2005, Synthesis of SiC ceramics by the carbothermal reduction of mineralized wood with silica, Adv Mater, 17, 73, 10.1002/adma.200400371
Huang, 2003, Nano-precision replication of natural cellulosic substances by metal oxides, J Am Chem Soc, 125, 11834, 10.1021/ja037419k
Meldrum, 2000, Porous gold structures through templating by echinoid skeletal plates, Chem Commun, 29, 10.1039/a907074e
Luo, 2003, Structure formation and characterization of EVAL membranes with cosolvent of isopropanol and water, Polymer, 44, 157, 10.1016/S0032-3861(02)00712-7
Zhang, 2010, Hierarchical macroporous epoxy resin templated from single semi-fluorinated surfactant, J Porous Mater, 17, 693, 10.1007/s10934-009-9340-1
Tang, 2008, Square packing and structural arrangement of ABC triblock copolymer spheres in thin films, Macromolecules, 41, 4328, 10.1021/ma800207n
Xiang, 2004, Electrically induced patterning in block copolymer films, Macromolecules, 37, 5358, 10.1021/ma049888s
Morikawa, 2006, Optical alignment and patterning of nanoscale microdomains in a block copolymer thin film, Adv Mater, 18, 883, 10.1002/adma.200502573
Li, 2007, Controlled patterning of polymer films using an AFM tip as a nano-hammer, Nanotechnology, 18, 10.1088/0957-4484/18/24/245302
Behl, 2002, Towards plastic electronics: patterning semiconducting polymers by nanoimprint lithography, Adv Mater, 14, 588, 10.1002/1521-4095(20020418)14:8<588::AID-ADMA588>3.0.CO;2-K
Campbell, 2000, Fabrication of photonic crystals for the visible spectrum by holographic lithography, Nature, 404, 53, 10.1038/35003523
Srinivasarao, 2001, Three-dimensionally ordered array of air bubbles in a polymer film, Science, 292, 79, 10.1126/science.1057887
Widawski, 1994, Self-organized honeycomb morphology of star-polymer polystyrene films, Nature, 369, 387, 10.1038/369387a0
Bunz, 2006, Breath figures as a dynamic templating method for polymers and nanomaterials, Adv Mater, 18, 973, 10.1002/adma.200501131
Hernandez-Guerrero, 2012, Honeycomb structured polymer films via breath figures, Polym Chem, 3, 563, 10.1039/C1PY00219H
Escalé, 2012, Recent advances in honeycomb-structured porous polymer films prepared via breath figures, Eur Polym J, 48, 1001, 10.1016/j.eurpolymj.2012.03.001
Sundrani, 2004, Hierarchical assembly and compliance of aligned nanoscale polymer cylinders in confinement, Langmuir, 20, 5091, 10.1021/la036123p
Chong, 2006, Combinational template-assisted fabrication of hierarchically ordered nanowire arrays on substrates for device applications, Appl Phys Lett, 89, 10.1063/1.2399935
Gorzolnik, 2006, Nano-structured micropatterns by combination of block copolymer self-assembly and UV photolithography, Nanotechnology, 17, 5027, 10.1088/0957-4484/17/19/042
Segalman, 2001, Graphoepitaxy of spherical domain block copolymer films, Adv Mater, 13, 1152, 10.1002/1521-4095(200108)13:15<1152::AID-ADMA1152>3.0.CO;2-5
Ming, 2005, Superhydrophobic films from raspberry-like particles, Nano Lett, 5, 2298, 10.1021/nl0517363
Sel, 2006, Principles of hierarchical meso- and macropore architectures by liquid crystalline and polymer colloid templating, Langmuir, 22, 2311, 10.1021/la0520841
Rolison, 2003, Catalytic nanoarchitectures: the importance of nothing and the unimportance of periodicity, Science, 299, 1698, 10.1126/science.1082332
Jenekhe, 1999, Self-assembly of ordered microporous materials from rod-coil block copolymers, Science, 283, 372, 10.1126/science.283.5400.372
Sun, 2010, Ordered honeycomb-patterned films via breath figures, Prog Chem, 22, 1784
Barrow, 2004, Physical characterisation of microporous and nanoporous polymer films by atomic force microscopy, scanning electron microscopy and high speed video microphotography, Spectroscopy, 18, 577, 10.1155/2004/526415
Kuo, 2010, Dynamics of single-layer polymer breath figures, Opt Express, 18, 18464, 10.1364/OE.18.018464
Fritter, 1991, Experiments and simulation of the growth of droplets on a surface (breath figures), Phys Rev A: At Mol Opt Phys, 43, 2858, 10.1103/PhysRevA.43.2858
Family, 1988, Scaling of the droplet-size distribution in vapor-deposited thin films, Phys Rev Lett, 61, 428, 10.1103/PhysRevLett.61.428
Fritter, 1988, Computer simulations of the growth of breath figures, J Stat Phys, 52, 1447, 10.1007/BF01011659
Narhe, 2009, Condensation-induced jumping water drops, Phys Rev E: Stat Nonlinear Soft Matter Phys, 80, 10.1103/PhysRevE.80.031604
Rogers, 1988, Droplet growth and coarsening during heterogeneous vapor condensation, Phys Rev A: At Mol Opt Phys, 38, 5303, 10.1103/PhysRevA.38.5303
Steyer, 1990, Two-dimensional ordering during droplet growth on a liquid surface, Phys Rev B: Condens Matter, 42, 1086, 10.1103/PhysRevB.42.1086
Krapivsky, 1993, Growth of a single drop formed by diffusion and adsorption of monomers on a two-dimensional substrate, Phys Rev E: Stat Nonlinear Soft Matter Phys, 47, 1199, 10.1103/PhysRevE.47.1199
Tavassoli, 2000, Diffusive growth of a single droplet with three different boundary conditions, Eur Phys J B, 14, 139, 10.1007/s100510050114
Steyer, 1991, Growth of droplets on a substrate by diffusion and coalescence, Phys Rev A: At Mol Opt Phys, 44, 8271, 10.1103/PhysRevA.44.8271
Blaschke, 2012, Breath figures: nucleation, growth, coalescence, and the size distribution of droplets, Phys Rev Lett, 109, 10.1103/PhysRevLett.109.068701
Gau, 1998, Coalescence dynamics of ordered breath figures, Prog Colloid Polym Sci, 110, 34, 10.1007/BFb0118044
Lopez, 1993, Imaging of features on surfaces by condensation figures, Science, 260, 647, 10.1126/science.8480175
Knobler, 1988, Growth of breath figures on fluid surfaces, Europhys Lett, 6, 707, 10.1209/0295-5075/6/8/007
Bormashenko, 2005, Mesoscopic patterning in evaporated polymer solutions: new experimental data and physical mechanisms, Langmuir, 21, 9604, 10.1021/la0518492
Bormashenko, 2006, Self-assembly in evaporated polymer solutions: influence of the solution concentration, J Colloid Interface Sci, 297, 534, 10.1016/j.jcis.2005.11.025
Bormashenko, 2006, Patterning in rapidly evaporated polymer solutions: formation of annular structures under evaporation of the poor solvent, J Colloid Interface Sci, 300, 293, 10.1016/j.jcis.2006.03.064
Bormashenko, 2007, Self-assembly in evaporated polymer solutions: patterning on two scales, Isr J Chem, 47, 319, 10.1560/IJC.47.3-4.319
Bormashenko, 2007, Self-assembled patterns obtained with evaporated polymer solutions and pre-stretched polymer substrates, Colloids Surf A, 303, 253, 10.1016/j.colsurfa.2007.04.024
Bormashenko, 2010, On the mechanism of patterning in rapidly evaporated polymer solutions: is temperature-gradient-driven Marangoni instability responsible for the large-scale patterning?, J Colloid Interface Sci, 343, 602, 10.1016/j.jcis.2009.12.005
Wong, 2006, Water-assisted formation of honeycomb structured porous films, J Porous Mater, 13, 213, 10.1007/s10934-006-8007-4
Stenzel, 2006, Formation of honeycomb-structured, porous films via breath figures with different polymer architectures, J Polym Sci Part A: Polym Chem, 44, 2363, 10.1002/pola.21334
Govor, 2001, Self-organized networks based on conjugated polymers, Adv Mater, 13, 588, 10.1002/1521-4095(200104)13:8<588::AID-ADMA588>3.0.CO;2-C
Angus, 2002, Polymer surface design and infomatics: facile microscopy/image analysis techniques for self-organizing microporous polymer film characterization, Langmuir, 18, 9547, 10.1021/la026006e
Yabu, 2003, Preparation of honeycomb-patterned polyimide films by self-organization, Langmuir, 19, 6297, 10.1021/la034454w
Nishikawa, 2003, Micropatterns based on deformation of a viscoelastic honeycomb mesh, Langmuir, 19, 6193, 10.1021/la0300129
Song, 2004, Facile microstructuring of organic semiconducting polymers by the breath figure method: hexagonally ordered bubble arrays in rigid rod-polymers, Adv Mater, 16, 115, 10.1002/adma.200306031
Boker, 2004, Hierarchical nanoparticle assemblies formed by decorating breath figures, Nat Mater, 3, 302, 10.1038/nmat1110
Madej, 2008, Breath figures in polymer and polymer blend films spin-coated in dry and humid ambience, Langmuir, 24, 3517, 10.1021/la703363a
Park, 2005, Broad-band antireflection coating at near-infrared wavelengths by a breath figure, Langmuir, 21, 11404, 10.1021/la051273g
Park, 2006, Porous structures of polymer films prepared by spin coating with mixed solvents under humid condition, Langmuir, 22, 4594, 10.1021/la053009t
Orlov, 2007, pH-responsive thin film membranes from poly(2-vinylpyridine): water vapor-induced formation of a microporous structure, Macromolecules, 40, 2086, 10.1021/ma062821f
Muñoz-Bonilla, 2009, Engineering polymer surfaces with variable chemistry and topography, J Polym Sci Part A: Polym Chem, 47, 2262, 10.1002/pola.23305
Pilati, 2007, Design of surface properties of PET films: effect of fluorinated block copolymers, J Colloid Interface Sci, 315, 210, 10.1016/j.jcis.2007.06.046
Roszol, 2010, Micropatterned polyvinyl butyral membrane for acid-base diodes, J Phys Chem B, 114, 13718, 10.1021/jp106773y
Hiwatari, 2001, Graft copolymers having hydrophobic backbone and hydrophilic branches XXXIV. Fabrication and control of honeycomb structure prepared from amphiphilic graft copolymers, Polym J, 33, 669, 10.1295/polymj.33.669
Kasai, 2004, Fabrication of honeycomb-patterned cellulose films, Macromol Biosci, 4, 17, 10.1002/mabi.200300054
Wang, 2006, Micropatterned polymer surfaces induced by nonsolvent, Langmuir, 22, 1928, 10.1021/la051646d
Nishikawa, 2002, Fabrication of honeycomb film of an amphiphilic copolymer at the air–water interface, Langmuir, 18, 5734, 10.1021/la011451f
Connal, 2005, From well defined star-microgels to highly ordered honeycomb films, J Mater Chem, 15, 1286
Cheng, 2005, Porous polymer films and honeycomb structures based on amphiphilic dendronized block copolymers, Langmuir, 21, 6576, 10.1021/la050187d
Nemoto, 2005, Production of mesoscopically patterned cellulose film, Bioresour Technol, 96, 1955, 10.1016/j.biortech.2005.01.034
Maruyama, 1998, Mesoscopic pattern formation of nanostructured polymer assemblies, Supramol Sci, 5, 331, 10.1016/S0968-5677(98)00027-3
Zhang, 2012, Fabrication of honeycomb polyvinyl butyral film under humidity provided by super saturated salt solutions, J Appl Polym Sci, 124, 495, 10.1002/app.34795
Fukuhira, 2009, Interfacial tension governs the formation of self-organized honeycomb-patterned polymer films, Soft Matter, 5, 2037, 10.1039/b821183c
Huh, 2012, Fabrication of honeycomb-structured porous films from poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) via the breath figures method, Polym Eng Sci, 52, 920, 10.1002/pen.22161
Han, 2008, Formation of honeycomb films based on a soluble polyimide synthesized from 2,2′-bis 4-(3,4-dicarboxyphenoxy)phenyllhexafluoropropane dianhydride and 3,3′-dimethyl-4,4′-diaminodiphenylmethane, J Appl Polym Sci, 107, 618, 10.1002/app.27109
Chen, 2010, Polymethylene-b-polystyrene diblock copolymer: synthesis, property, and application, J Polym Sci Part A: Polym Chem, 48, 1894, 10.1002/pola.23954
Tian, 2006, The formation of honeycomb structure in polyphenylene oxide films, Polymer, 47, 3866, 10.1016/j.polymer.2006.03.081
Nuffer, 1999, Preparation of networks with C60 knots using anionic polymers, Synth Met, 103, 2376, 10.1016/S0379-6779(98)00720-6
Stenzel-Rosenbaum, 2001, Porous polymer films and honeycomb structures made by the self-organization of well-defined macromolecular structures created by living radical polymerization techniques, Angew Chem Int Ed, 40, 3428, 10.1002/1521-3773(20010917)40:18<3428::AID-ANIE3428>3.0.CO;2-6
Lin, 2005, Synthesis of rod-coil diblock copolymers by ATRP and their honeycomb morphologies formed by the ‘breath figures’ method, Polymer, 46, 9304, 10.1016/j.polymer.2005.07.051
Ferrari, 2011, Solvent and substrate contributions to the formation of breath figure patterns in polystyrene films, Langmuir, 27, 1874, 10.1021/la104500j
Ucar, 2012, Dropwise condensation rate of water breath figures on polymer surfaces having similar surface free energies, Appl Phys Lett, 259, 515
Muñoz-Bonilla, 2010, Fabrication of honeycomb-structured porous surfaces decorated with glycopolymers, Langmuir, 26, 8552, 10.1021/la904565d
de Boer, 2000, Microporous honeycomb-structured films of semiconducting block copolymers and their use as patterned templates, Adv Mater, 12, 1581, 10.1002/1521-4095(200011)12:21<1581::AID-ADMA1581>3.0.CO;2-R
Qin, 2012, Fabrication of polymeric honeycomb microporous films: breath figures strategy and stabilization of water droplets by fluorinated diblock copolymer micelles, J Mater Sci, 47, 6862, 10.1007/s10853-012-6629-2
Saunders, 2006, Breath figure templated self-assembly of porous diblock copolymer films, Phys Rev E: Stat Nonlinear Soft Matter Phys, 73, 10.1103/PhysRevE.73.031608
Wong, 2007, Honeycomb structured porous films from amphiphilic block copolymers prepared via RAFT polymerization, Polymer, 48, 4950, 10.1016/j.polymer.2007.06.048
Nishikawa, 1999, Honeycomb-patterned thin films of amphiphilic polymers as cell culture substrates, Mater Sci Eng C, 8-9, 495, 10.1016/S0928-4931(99)00075-2
Qu, 2007, A novel poly(p-phenylene vinylene)-b-poly(methyl methacrylate) rod-coil diblock copolymer, Mater Lett, 61, 3421, 10.1016/j.matlet.2006.11.110
Park, 2012, Particle and breath figure formation of triblock copolymers having self-complementary hydrogen-bonding units, J Polym Sci Part A: Polym Chem, 50, 4408, 10.1002/pola.26256
Sambhy, 2008, Antibacterial and hemolytic activities of pyridinium polymers as a function of the spatial relationship between the positive charge and the pendant alkyl tail, Angew Chem Int Ed, 47, 1250, 10.1002/anie.200702287
Stenzel, 2002, Formation of regular honeycomb-patterned porous film by self-organization, Aust J Chem, 55, 239, 10.1071/CH02056
Stenzel, 2003, Honeycomb structured porous films prepared from carbohydrate based polymers synthesized via the RAFT process, J Mater Chem, 13, 2090, 10.1039/b304204a
François, 1999, Honeycomb membranes made from C60(PS)6, Synth Met, 103, 2362, 10.1016/S0379-6779(98)00697-3
Cheng, 2005, Ordered honeycomb-structured films from dendronized PMA-b-PEO rod-coil block copolymers, Macromol Rapid Commun, 26, 1266, 10.1002/marc.200500268
Hsieh, 2009, Self-assembling microporous matrix from dendritic-linear copolymers based on a solvent-induced phase separation mechanism, Macromolecules, 42, 4787, 10.1021/ma9002616
Vivek, 2009, Arborescent polystyrene via ambient temperature ATRP: toward ordered honeycomb microstructured templates, Macromolecules, 42, 2300, 10.1021/ma802321r
Liu, 2009, Self-organized ordered microporous thin films from grafting copolymers, Polymer, 50, 2716, 10.1016/j.polymer.2009.04.009
Hernandez-Guerrero, 2005, Polystyrene comb polymers built on cellulose or poly(styrene-co-2-hydroxyethylmethacrylate) backbones as substrates for the preparation of structured honeycomb films, Eur Polym J, 41, 2264, 10.1016/j.eurpolymj.2005.04.040
Nomura, 2010, Self-organized honeycomb-patterned microporous polystyrene thin films fabricated by calix 4 arene derivatives, Langmuir, 26, 10266, 10.1021/la100434b
Peng, 2004, The influencing factors on the macroporous formation in polymer films by water droplet templating, Polymer, 45, 447, 10.1016/j.polymer.2003.11.019
Tian, 2006, Influence of solvents on the formation of honeycomb films by water droplets templating, Macromol Chem Phys, 207, 545, 10.1002/macp.200500462
de León, 2012, Breath figures method to control the topography and the functionality of polymeric surfaces in porous films and microspheres, J Polym Sci Part A: Polym Chem, 50, 851, 10.1002/pola.25826
Zhou, 2001, Effect of the solvent on the particle morphology of spray dried PMMA, J Mater Sci, 36, 3759, 10.1023/A:1017982018651
Cui, 2004, Tunable ordered droplets induced by convection in phase-separating P2VP/PS blend film, Polymer, 45, 8139, 10.1016/j.polymer.2004.09.065
Sakurai, 2002, Control of mesh pattern of surface corrugation via rate of solvent evaporation in solution casting of polymer film in the presence of convection, Polymer, 43, 3359, 10.1016/S0032-3861(02)00156-8
Lu, 2008, Fabrication of conducting polyaniline composite film using honeycomb ordered sulfonated polysulfone film as template, Thin Solid Films, 516, 6365, 10.1016/j.tsf.2007.12.138
Lu, 2009, Template synthesis of conducting polyaniline composites based on honeycomb ordered polycarbonate film, Polymer, 50, 2035, 10.1016/j.polymer.2009.02.026
Erdogan, 2004, Permanent bubble arrays from a cross-linked poly(para-phenyleneethynylene): picoliter holes without microfabrication, J Am Chem Soc, 126, 3678, 10.1021/ja0320020
Wang, 2007, Formation of ordered macroporous films from fluorinated polyimide by water droplets templating, Eur Polym J, 43, 862, 10.1016/j.eurpolymj.2006.12.002
Tian, 2007, Formation of deformed honeycomb-patterned films from fluorinated polyimide, Polymer, 48, 2338, 10.1016/j.polymer.2007.02.028
Barner-Kowollik, 2003, Nano- and micro-engineering of ordered porous blue-light-emitting films by templating well-defined organic polymers around condensing water droplets, Angew Chem Int Ed, 42, 3664, 10.1002/anie.200351612
Tian, 2006, Water-assisted formation of honeycomb films of poly(l-lactic-co-glycolic acid), J Appl Polym Sci, 100, 1013, 10.1002/app.22926
Zhao, 2003, Formation of ordered microporous films with water as templates from poly(d,l-lactic-co-glycolic acid) solution, J Appl Polym Sci, 90, 1846, 10.1002/app.12836
Hao, 2004, Molecular composite materials formed from block copolymers containing a side-chain liquid crystalline segment and an amorphous styrene/maleic anhydride segment, Polymer, 45, 7401, 10.1016/j.polymer.2004.08.068
Englert, 2005, Templated ceramic microstructures by using the breath-figure method, Chem Eur J, 11, 995, 10.1002/chem.200400921
Bolognesi, 2008, Polystyrene functionalized with EDOT oligomers, Eur Polym J, 44, 793, 10.1016/j.eurpolymj.2007.12.002
Theiler, 2011, Fabrication of highly porous scaffolds for tissue engineering based on star-shaped functional poly(epsilon-caprolactone), Biotechnol Bioeng, 108, 694, 10.1002/bit.22979
Wu, 2011, Surfactant-free poly(lactide-co-glycolide) honeycomb films for tissue engineering: relating solvent, monomer ratio and humidity to scaffold structure, Biotechnol Lett, 33, 423, 10.1007/s10529-010-0438-y
Tian, 2007, Formation of honeycomb films from poly(l-lactiae)-block-poly(ethylene glycol) via water-droplet templating, Polym Int, 56, 834, 10.1002/pi.2173
Ting, 2009, Lectin recognizable biomaterials synthesized via nitroxide-mediated polymerization of a methacryloyl galactose monomer, Macromolecules, 42, 9422, 10.1021/ma9019015
Billon, 2009, Tailoring highly ordered honeycomb films based on ionomer macromolecules by the bottom-up approach, Macromolecules, 42, 345, 10.1021/ma8020568
Wang, 2010, Quantum-dot-embedded ionomer-derived films with ordered honeycomb structures via breath figures, Chem Commun, 46, 7376, 10.1039/c0cc02384a
Wang, 2012, Multifunctional ionomer-derived honeycomb-patterned architectures and their performance in light enhancement of light-emitting diodes, J Mater Chem, 22, 4089, 10.1039/c2jm16617h
Hill, 2010, Macroporous poly(aromatic amine): synthesis and film fabrication, Colloids Surf A, 354, 156, 10.1016/j.colsurfa.2009.07.033
Liu, 2010, Formation of polyethersulfone film with regular microporous structure by water vapor induced phase separation, Chin J Chem Eng, 18, 529, 10.1016/S1004-9541(10)60254-6
Li, 2010, Highly ordered microporous films containing a polyolefin segment fabricated by the breath-figure method using well-defined polymethylene-b-polystyrene copolymers, Polym Chem, 1, 164, 10.1039/B9PY00219G
Du, 2011, Honeycomb self-assembled peptide scaffolds by the breath figure method, Chem Eur J, 17, 4238, 10.1002/chem.201003021
Peng, 2003, Formation of regular hole pattern in polymer films, Macromol Chem Phys, 204, 125, 10.1002/macp.200290068
Chen, 2012, Adjustable supramolecular polymer microstructures fabricated by the breath figure method, Polym Chem, 3, 458, 10.1039/C1PY00438G
Kim, 2010, Effect of amphiphilic copolymer containing ruthenium tris(bipyridyl) photosensitizer on the formation of honeycomb-patterned film, Polymer, 51, 3365, 10.1016/j.polymer.2010.05.050
Thinh, 2012, Characterization and electrochemical behaviors of honeycomb-patterned poly(N-vinylcarbazole)/polystyrene composite films, Polym Bull, 69, 81, 10.1007/s00289-012-0727-9
Kuroda, 2009, The role of hydrophobicity in the antimicrobial and hemolytic activities of polymethacrylate derivatives, Chem Eur J, 15, 1123, 10.1002/chem.200801523
Bormashenko, 2012, On the nature of the breath figures self-assembly in evaporated polymer solutions: revisiting physical factors governing the patterning, Macromol Chem Phys, 213, 1742, 10.1002/macp.201200272
Connal, 2008, Dramatic morphology control in the fabrication of porous polymer films, Adv Funct Mater, 18, 3706, 10.1002/adfm.200800568
Jiang, 2011, Formation of honeycomb-patterned microporous films based on a fluorinated poly(siloxane imide) segmented copolymer, J Appl Polym Sci, 119, 3329, 10.1002/app.33085
Yabu, 2005, Single-step fabrication of transparent superhydrophobic porous polymer films, Chem Mater, 17, 5231, 10.1021/cm051281i
Deepak, 2006, Self-organization-induced three-dimensional honeycomb pattern in structure-controlled bulky methacrylate polymers: synthesis, morphology, and mechanism of pore formation, J Phys Chem B, 110, 21450, 10.1021/jp063469a
Voronoi, 1908, Nouvelles applications des paramètres continus à la théorie des formes quadratiques. Deuxième mémoire. Recherches sur les parallélloèdres primitifs, J Reine Angew Math (Crelle's J), 134, 198, 10.1515/crll.1908.134.198
Voronoi, 1909, Nouvelles applications des paramètres continus à théorie des formes quadratiques. Deuxième Mémoire. Recherches sur les paralléloèdres primitifs, J Reine Angew Math (Crelle's J), 136, 67, 10.1515/crll.1909.136.67
Lewis, 1928, The correlation between cell division and the shapes and sizes of prismatic cells in the epidermis of cucumis, Anat Rec, 38, 341, 10.1002/ar.1090380305
Weaire, 2009, Soap, cells and statistics—random patterns in two dimensions, Contemp Phys, 50, 199, 10.1080/00107510902734680
Schneider, 2012, NIH Image to ImageJ: 25 years of image analysis, Nat Methods, 9, 671, 10.1038/nmeth.2089
Ejima, 2008, Morphology-retaining carbonization of honeycomb-patterned hyperbranched poly(phenylene vinylene) film, Macromolecules, 41, 9846, 10.1021/ma8017348
Bolognesi, 2005, Self-organization of polystyrenes into ordered microstructured films and their replication by soft lithography, Langmuir, 21, 3480, 10.1021/la047427u
Servoli, 2010, Interplay of kinetics and interfacial interactions in breath figure templating—a phenomenological interpretation, Polymer, 51, 2337, 10.1016/j.polymer.2010.03.039
Cai, 2009, Porous polymer films templated by Marangoni flow-induced water droplet arrays, Langmuir, 25, 7638, 10.1021/la901335w
Yabu, 2008, Miniaturization of surface patterns by combination of contact etching lithography and multi-step shrinking of stretched polymer films, Polym J, 40, 534, 10.1295/polymj.PJ2008022
Yabu, 2008, Preparation of highly oriented nano-pit arrays by thermal shrinking of honeycomb-patterned polymer films, Adv Mater, 20, 4200, 10.1002/adma.200801170
Li, 2005, Ordered honeycomb-structured gold nanoparticle films with changeable pore morphology: from circle to ellipse, Langmuir, 21, 2017, 10.1021/la047625l
Ge, 2011, Hierarchical honeycomb patterns with tunable microstructures: controllable fabrication and application as replication templates, Soft Matter, 7, 2790, 10.1039/c0sm01159b
Yabu, 2005, Superhydrophobic and lipophobic properties of self-organized honeycomb and pincushion structures, Langmuir, 21, 3235, 10.1021/la050013w
Tanaka, 2009, Fabrication of ordered arrays of biodegradable polymer pincushions using self-organized honeycomb-patterned films, Macromol Symp, 279, 175, 10.1002/masy.200950527
Escalé, 2011, pH sensitive hierarchically self-organized bioinspired films, Macromol Rapid Commun, 32, 1072, 10.1002/marc.201100296
Nakamichi, 2011, Fabrication of patterned and anisotropic porous films based on photo-cross-linking of poly(1,2-butadiene) honeycomb films, J Mater Chem, 21, 3884, 10.1039/c0jm03840g
Wan, 2011, Pore shape of honeycomb-patterned films: modulation and interfacial behavior, J Phys Chem B, 116, 40, 10.1021/jp208115u
Shojaei-Zadeh, 2009, Highly uniform micro-cavity arrays in flexible elastomer film, Soft Matter, 5, 743, 10.1039/b808109c
Kabuto, 2007, Thermally stable and solvent resistant mesoporous honeycomb films from a crosslinkable polymer, Adv Funct Mater, 17, 3569, 10.1002/adfm.200700249
Min, 2010, Thermo-responsive glycopolymer chains grafted onto honeycomb structured porous films via RAFT polymerization as a thermo-dependent switcher for lectin concanavalin a conjugation, J Polym Sci Part A Polym Chem, 48, 3440, 10.1002/pola.24129
Zhang, 2007, Robust organic/inorganic hybrid porous thin films via breath-figure method and gelation process, Macromol Rapid Commun, 28, 2024, 10.1002/marc.200700384
Bolognesi, 2010, Unsoluble ordered polymeric pattern by breath figure approach, J Mater Chem, 20, 1483, 10.1039/b917267j
Li, 2010, Formation of ceramic microstructures: honeycomb patterned polymer films as structure-directing agent, J Mater Chem, 20, 5446, 10.1039/c0jm00405g
Ma, 2010, Patterned carbon nanotubes with adjustable array: a functional breath figure approach, Chem Mater, 22, 2367, 10.1021/cm9036633
Yabu, 2006, Fabrication of photo-cross linked honeycomb-patterned films, Colloids Surf A, 284-285, 254, 10.1016/j.colsurfa.2005.10.049
Li, 2009, Thermally stable and solvent resistant honeycomb structured polystyrene films via photochemical cross-linking, J Mater Chem, 19, 7222, 10.1039/b911714h
Li, 2009, Fabrication of robust honeycomb polymer films: a facile photochemical cross-linking process, J Colloid Interface Sci, 331, 446, 10.1016/j.jcis.2008.11.053
Karikari, 2006, Porous thin films based on photo-cross-linked star-shaped poly(d,l-lactide)s, Langmuir, 22, 9687, 10.1021/la0603020
Connal, 2008, Fabrication of reversibly crosslinkable, 3-dimensionally conformal polymeric microstructures, Adv Funct Mater, 18, 3315, 10.1002/adfm.200800333
Cong, 2012, Preparation of a highly permeable ordered porous microfiltration membrane of brominated poly(phenylene oxide) on an ice substrate by the breath figure method, Soft Matter, 8, 8835, 10.1039/c2sm25706h
Tian, 2006, Formation of honeycomb-patterned polyetherketone cardo (PEK-C) films in a highly humid atmosphere, Macromol Chem Phys, 207, 1998, 10.1002/macp.200600357
Zhang, 2008, Porous honeycomb films prepared from poly(phthalazionone ether sulfone ketone) (PPESK) by self-organization method, J Appl Polym Sci, 109, 1524, 10.1002/app.28277
Bormashenko, 2008, Free-standing, thermostable, micrometer-scale honeycomb polymer films and their properties, Macromol Mater Eng, 293, 872, 10.1002/mame.200800188
Li, 2011, Constructing robust 3-dimensionally conformal micropatterns: vulcanization of honeycomb structured polymeric films, Soft Matter, 7, 546, 10.1039/C0SM00809E
Connal, 2006, Preparation of porous poly(dimethylsiloxane)-based honeycomb materials with hierarchal surface features and their use as soft-lithography templates, Adv Mater, 18, 3024, 10.1002/adma.200600982
Connal, 2007, Honeycomb coated particles: porous doughnuts, golf balls and hollow porous pockets, Soft Matter, 3, 837, 10.1039/b700597k
Blencowe, 2009, Core cross-linked star polymers via controlled radical polymerisation, Polymer, 50, 5, 10.1016/j.polymer.2008.09.049
Ding, 2012, Constructing honeycomb micropatterns on nonplanar substrates with high glass transition temperature polymers, J Colloid Interface Sci, 380, 99, 10.1016/j.jcis.2012.04.072
Zhang, 2012, Honeycomb films from perfluoropolyether-based star and micelle architectures, Aust J Chem, 65, 1186, 10.1071/CH12252
Jiang, 2010, Interfacial effects of in situ-synthesized Ag nanoparticles on breath figures, Langmuir, 26, 2477, 10.1021/la9027139
Bai, 2011, Variable self-assembled micronanostructures of bis(8-hydroxyquinolato)-urushiolato aluminum(III) by the reverse breath figure method, Optoelectron Adv Mater Rapid Commun, 5, 22
Xiong, 2009, Microsphere pattern prepared by a “reverse” breath figure method, Macromolecules, 42, 9351, 10.1021/ma9018119
Xiong, 2012, Preparation of hollow TiO2 microspheres using a novel polymer microsphere template, React Funct Polym, 72, 365, 10.1016/j.reactfunctpolym.2012.03.012
Deepak, 2008, Random and AB diblock copolymers of tricyclodecanemethanol urethane methacrylate with styrene: synthesis and morphology characterization, J Polym Sci Part A Polym Chem, 46, 1278, 10.1002/pola.22469
Jin, 2010, Functionalization of honeycomb-patterned films, Prog Chem, 22, 2173
Nurmawati, 2006, Amphiphilic poly(p-phenylene)s for self-organized porous blue-light-emitting thin films, Adv Funct Mater, 16, 2340, 10.1002/adfm.200600362
Heng, 2006, Enhancement of photocurrent generation by honeycomb structures in organic thin films, ChemPhysChem, 7, 2520, 10.1002/cphc.200600393
Yunus, 2007, A route to self-organized honeycomb microstructured polystyrene films and their chemical characterization by ToF-SIMS imaging, Adv Funct Mater, 17, 1079, 10.1002/adfm.200600470
Connal, 2010, Photochromic, metal-absorbing honeycomb structures, Langmuir, 26, 10397, 10.1021/la100686m
Ke, 2010, Controllable construction of carbohydrate microarrays by site-directed grafting on self-organized porous films, Langmuir, 26, 8946, 10.1021/la904729b
Maillard, 2000, Rings and hexagons made of nanocrystals: a Marangoni effect, J Phys Chem B, 104, 11871, 10.1021/jp002605n
Yonezawa, 2001, Self-organized superstructures of fluorocarbon-stabilized silver nanoparticles, Adv Mater, 13, 140, 10.1002/1521-4095(200101)13:2<140::AID-ADMA140>3.0.CO;2-H
Shah, 2003, Single-step self-organization of ordered macroporous nanocrystal thin films, Adv Mater, 15, 971, 10.1002/adma.200304903
Zhang, 2008, Highly ordered fluorescent rings by “breath figures” on patterned substrates using polymer-free CdSe quantum dots, J Mater Chem, 18, 2660, 10.1039/b718643f
Bormashenko, 2005, Self-assembled honeycomb polycarbonate films deposited on polymer piezoelectric substrates and their applications, Polym Adv Technol, 16, 299, 10.1002/pat.585
Zhao, 2007, Fabrication of honeycomb ordered polycarbonate films using water droplets as template, Thin Solid Films, 515, 3629, 10.1016/j.tsf.2006.10.073
Ma, 2011, In situ optical microscopy observation of the growth and rearrangement behavior of surface holes in the breath figure process, Polymer, 52, 489, 10.1016/j.polymer.2010.11.031
Park, 2004, Breath figure patterns prepared by spin coating in a dry environment, Langmuir, 20, 5347, 10.1021/la035915g
Galeotti, 2012, Precise surface patterning of silk fibroin films by breath figures, Soft Matter, 8, 4815, 10.1039/c2sm25089f
Yamamoto, 2007, Effect of honeycomb-patterned surface topography on the adhesion and signal transduction of porcine aortic endothelial cells, Langmuir, 23, 8114, 10.1021/la7003326
Zhao, 2006, Water-assisted fabrication of honeycomb structure porous film from poly(l-lactide), J Mater Chem, 16, 509, 10.1039/B512398D
Galeotti, 2010, Self-functionalizing polymer film surfaces assisted by specific polystyrene end-tagging, Chem Mater, 22, 2764, 10.1021/cm903652x
Ghannam, 2007, A versatile route to functional biomimetic coatings: ionomers for honeycomb-like structures, Soft Matter, 3, 1492, 10.1039/b710282h
Stenzel, 2003, Biomimetic honeycomb-structured surfaces formed from block copolymers incorporating acryloyl phosphorylcholine, Aust J Chem, 56, 1035, 10.1071/CH03124
Bolognesi, 2009, Nanophase separation in polystyrene–polyfluorene block copolymers thin films prepared through the breath figure procedure, Langmuir, 25, 5333, 10.1021/la804139s
Samanta, 2011, Multifunctional porous poly(vinylidene fluoride)-graft-poly(butyl methacrylate) with good Li+ ion conductivity, Macromol Chem Phys, 212, 134, 10.1002/macp.201000472
Dong, 2009, Honeycomb-structured microporous films made from hyperbranched polymers by the breath figure method, Langmuir, 25, 173, 10.1021/la802863m
Liu, 2007, Honeycomb-patterned photoluminescent films fabricated by self-assembly of hyperbranched polymers, Angew Chem Int Ed, 46, 4128, 10.1002/anie.200604429
Ke, 2010, Controlled synthesis of linear and comb-like glycopolymers for preparation of honeycomb-patterned films, Polymer, 51, 2168, 10.1016/j.polymer.2010.03.021
Escalé, 2011, Synthetic route effect on macromolecular architecture: from block to gradient copolymers based on acryloyl galactose monomer using RAFT polymerization, Macromolecules, 44, 5911, 10.1021/ma201208u
Muñoz-Bonilla, 2009, Self-organized hierarchical structures in polymer surfaces: self-assembled nanostructures within breath figures, Langmuir, 25, 6493, 10.1021/la9003214
de León, 2012, Hierarchically structured multifunctional porous interfaces through water templated self-assembly of ternary systems, Langmuir, 28, 9778, 10.1021/la3013188
Yabu, 2006, Mesoscale pincushions, microrings, and microdots prepared by heating and peeling of self-organized honeycomb-patterned films deposited on a solid substrate, Langmuir, 22, 4992, 10.1021/la053486b
Yabu, 2006, Electroless plating of honeycomb and pincushion polymer films prepared by self-organization, Langmuir, 22, 9760, 10.1021/la062228r
Xue, 2012, Phase separation induced ordered patterns in thin polymer blend films, Prog Polym Sci, 37, 564, 10.1016/j.progpolymsci.2011.09.001
Cui, 2005, Ordered porous polymer films via phase separation in humidity environment, Polymer, 46, 5334, 10.1016/j.polymer.2005.04.018
Cui, 2005, Honeycomb pattern formation via polystyrene/poly(2-vinylpyridine) phase separation, Langmuir, 21, 11085, 10.1021/la0511135
Cui, 2005, Polymer surfaces with reversibly switchable ordered morphology, Langmuir, 21, 11696, 10.1021/la051376z
Gliemann, 2007, Nanostructure formation in polymer thin films influenced by humidity, Surf Interface Anal, 39, 1, 10.1002/sia.2339
Wan, 2012, Patterned biocatalytic films via one-step self-assembly, Chem Commun, 48, 4417, 10.1039/c2cc17451k
Binks, 2002, Particles as surfactants—similarities and differences, Curr Opin Colloid Interface Sci, 7, 21, 10.1016/S1359-0294(02)00008-0
Sun, 2008, Rings of nanoparticle-decorated honeycomb-structured polymeric film: the combination of pickering emulsions and capillary flow in the breath figures method, Langmuir, 24, 11338, 10.1021/la8024217
Sun, 2010, Particle-assisted fabrication of honeycomb-structured hybrid films via breath figures method, Polymer, 51, 4169, 10.1016/j.polymer.2010.07.008
Vohra, 2009, Multilevel organization in hybrid thin films for optoelectronic applications, Langmuir, 25, 12019, 10.1021/la9032089
Nurmawati, 2008, Hierarchical self-organization of nanomaterials into two-dimensional arrays using functional polymer scaffold, Adv Funct Mater, 18, 3213, 10.1002/adfm.200800396
Ma, 2011, Fabrication of freestanding honeycomb films with through-pore structures via air/water interfacial self-assembly, Chem Commun, 47, 1154, 10.1039/C0CC02680H
Li, 2011, A bottom-up approach to fabricate patterned surfaces with asymmetrical TiO2 microparticles trapped in the holes of honeycomblike polymer film, J Am Chem Soc, 133, 3736, 10.1021/ja1106767
Sun, 2009, Micro-patterned polystyrene surfaces directed by surfactant-encapsulated polyoxometalate complex via breath figures, Polymer, 50, 2113, 10.1016/j.polymer.2009.02.036
Nair, 2010, Micropatterned surfaces through moisture-induced phase-separation of polystyrene–clay nanocomposite particles, Langmuir, 26, 12948, 10.1021/la1018295
Xu, 2012, Multiscale bio-inspired honeycomb structure material with high mechanical strength and low density, J Mater Chem, 22, 10883, 10.1039/c2jm31510f
You, 2008, Facile method for fabrication of nanocomposite films with an ordered porous surface, J Phys Chem B, 112, 7706, 10.1021/jp802812e
Nishida, 2002, Preparation of self-organized micro-patterned polymer films having cell adhesive ligands, Polym J, 34, 166, 10.1295/polymj.34.166
Zhang, 2007, Micropatterning of proteins on 3D porous polymer film fabricated by using the breath-figure method, Adv Mater, 19, 913, 10.1002/adma.200601169
Min, 2008, Microwells with patterned proteins by a self-assembly process using honeycomb-structured porous films, Adv Mater, 20, 3550, 10.1002/adma.200800569
Ke, 2010, Tunable assembly of nanoparticles on patterned porous film, Langmuir, 26, 15982, 10.1021/la1030608
Wan, 2010, Facilitated and site-specific assembly of functional polystyrene microspheres on patterned porous films, ACS Appl Mater Interfaces, 2, 3759, 10.1021/am1009277
Ke, 2011, Selective layer-by-layer self-assembly on patterned porous films modulated by Cassie–Wenzel transition, Phys Chem Chem Phys, 13, 4881, 10.1039/c0cp01229g
Xu, 2011, Design of functionalized cellulosic honeycomb films: site-specific biomolecule modification via “Click Chemistry”, Biomacromolecules, 13, 350, 10.1021/bm201364r
Hernandez-Guerrero, 2008, Grafting thermoresponsive polymers onto honeycomb structured porous films using the RAFT process, J Mater Chem, 18, 4718, 10.1039/b807495j
Nyström, 2010, Biomimetic surface modification of honeycomb films via a “grafting from” approach, Langmuir, 26, 12748, 10.1021/la1011567
Genzer, 2006, Recent developments in superhydrophobic surfaces and their relevance to marine fouling: a review, Biofouling, 22, 339, 10.1080/08927010600980223
Nosonovsky, 2007, Multiscale friction mechanisms and hierarchical surfaces in nano- and bio-tribology, Mater Sci Eng R, 58, 162, 10.1016/j.mser.2007.09.001
Hayakawa, 2003, From angstroms to micrometers: self-organized hierarchical structure within a polymer film, Angew Chem, 115, 2387, 10.1002/ange.200219877
Escalé, 2010, Hierarchical structures based on self-assembled diblock copolymers within honeycomb micro-structured porous films, Soft Matter, 6, 3202, 10.1039/c0sm00029a
Deleuze, 2012, Hierarchically structured hybrid honeycomb films via micro to nanosized building blocks, Soft Matter, 8, 8559, 10.1039/c2sm25820j
Geldhauser, 2009, Influence of the relative humidity on the demixing of polymer blends on prepatterned substrates, Macromolecules, 43, 1124, 10.1021/ma9022058
Hecht, 1998, Influence of relative humidity during film formation processes on the structure of ultrathin polymeric films, Langmuir, 14, 6743, 10.1021/la9804987
Greiser, 2008, Using breath figure patterns on structured substrates for the preparation of hierarchically structured microsieves, Langmuir, 24, 617, 10.1021/la7029449
Kwak, 2006, Nanoporous, honeycomb-structured network fibers spun from semiflexible, ultrahigh molecular weight, disubstituted aromatic polyacetylenes: superhierarchical structure and unique optical anisotropy, Chem Mater, 18, 5537, 10.1021/cm061719u
Zheng, 2012, Construction of hierarchical structures by electrospinning or electrospraying, Polymer, 53, 546, 10.1016/j.polymer.2011.12.018
Fashandi, 2012, Pore formation in polystyrene fiber by superimposing temperature and relative humidity of electrospinning atmosphere, Polymer, 53, 5832, 10.1016/j.polymer.2012.10.003
Wang, 2008, Fabrication of highly ordered microporous thin films by PS-b-PAA self-assembly and investigation of their tunable surface properties, J Mater Chem, 18, 683, 10.1039/b715520d
Bormashenko, 2011, Single-step technique allowing formation of microscaled thermally stable polymer honeycomb reliefs demonstrating reversible wettability, Polym Adv Technol, 22, 94, 10.1002/pat.1698
Brown, 2012, Superhydrophobic hierarchical honeycomb surfaces, Langmuir, 28, 13712, 10.1021/la302719m
Ting, 2009, Superhydrophobic waxy-dendron-grafted polymer films via nanostructure manipulation, J Mater Chem, 19, 4819, 10.1039/b900468h
Yabu, 2008, Surface properties of honeycomb and pincushion structures of various hydrophobic polymer materials prepared by self-organization, J Adhes Sci Technol, 22, 277, 10.1163/156856108X305174
Sanz de Leon, 2013, Honeycomb patterned surfaces functionalized with polypeptide sequences for recognition and selective bacterial adhesion, Biomaterials, 34, 1453, 10.1016/j.biomaterials.2012.10.074
Tsuruma, 2008, Control of neural stem cell differentiation on honeycomb films, Colloids Surf A, 313–314, 536, 10.1016/j.colsurfa.2007.05.079
Tanaka, 2004, Design of novel biointerfaces (II). Fabrication of self-organized porous polymer film with highly uniform pores, Bio-Med Mater Eng, 14, 439
Tanaka, 2006, Control of hepatocyte adhesion and function on self-organized honeycomb-patterned polymer film, Colloids Surf A, 284–285, 464, 10.1016/j.colsurfa.2005.11.098
Tanaka, 2007, Effect of pore size of self-organized honeycomb-patterned polymer films on spreading, focal adhesion, proliferation, and function of endothelial cells, J Nanosci Nanotechnol, 7, 763, 10.1166/jnn.2007.514
Sato, 2010, Effect of honeycomb-patterned surface topography on the function of mesenteric adipocytes, J Biomater Sci Polym Ed, 21, 1947, 10.1163/092050610X500615
Tsuruma, 2005, Morphological changes in neurons by self-organized patterned films, e-J Surf Sci Nanotech, 3, 159, 10.1380/ejssnt.2005.159
Wu, 2012, Regulating MC3T3-E1 cells on deformable poly(epsilon–caprolactone) honeycomb films prepared using a surfactant-free breath figure method in a water-miscible solvent, ACS Appl Mater Interfaces, 4, 4966, 10.1021/am301334s
Beattie, 2006, Honeycomb-structured porous films from polypyrrole-containing block copolymers prepared via RAFT polymerization as a scaffold for cell growth, Biomacromolecules, 7, 1072, 10.1021/bm050858m
Duan, 2013, Osteocompatibility evaluation of poly(glycine ethyl ester-co-alanine ethyl ester)phosphazene with honeycomb-patterned surface topography, J Biomed Mater Res Part A, 101, 307, 10.1002/jbm.a.34282
Fukuhira, 2008, Prevention of postoperative adhesions by a novel honeycomb-patterned poly(lactide) film in a rat experimental model, J Biomed Mater Res Part B, 86, 353, 10.1002/jbm.b.31026
Jiang, 2012, Bacterial adhesion on honeycomb-structured poly(l-lactic acid) surface with Ag nanoparticles, J Biomed Nanotechnol, 8, 791, 10.1166/jbn.2012.1432
Kurono, 2002, Fabrication and optical property of self-organized honeycomb-patterned films, Mol Cryst Liq Cryst Sci Technol Sect A, 377, 285, 10.1080/713738506
Tsai, 2011, Structural dynamics and charge transfer via complexation with fullerene in large area conjugated polymer honeycomb thin films, Chem Mater, 23, 759, 10.1021/cm102160m
Yabu, 2009, Micropatterning of liquid crystalline polyacetylene derivative by using self-organization processes, Synth Met, 159, 762, 10.1016/j.synthmet.2008.12.015
Yu, 2008, Water-assisted self-assembly of polyaniline/Fe3O4 composite honeycomb structures film, Thin Solid Films, 516, 5107, 10.1016/j.tsf.2008.01.017
Ishii, 2008, Selective metal deposition in hydrophobic porous cavities of self-organized honeycomb-patterned polymer films by all-wet electroless plating, Colloids Surf A, 313-314, 590, 10.1016/j.colsurfa.2007.04.170
Haupt, 2004, Breath figures: self-organizing masks for the fabrication of photonic crystals and dichroic filters, J Appl Phys, 96, 3065, 10.1063/1.1778219
Hirai, 2010, Biomimetic bi-functional silicon nanospike-array structures prepared by using self-organized honeycomb templates and reactive ion etching, J Mater Chem, 20, 10804, 10.1039/c0jm02423f
Bilici, 2010, Oxidative polymerization of N(2)0(2) type Schiff base monomer and its metal complexes: synthesis and thermal, optical and electrochemical properties, J Inorg Organomet Polym Mater, 20, 124, 10.1007/s10904-009-9320-6
Sakatani, 2008, Coupling nanobuilding block and breath figures approaches for the designed construction of hierarchically templated porous materials and membranes, Chem Mater, 20, 1049, 10.1021/cm701986b
Gong, 2012, Fabrication of multi-level carbon nanotube arrays with adjustable patterns, Nanoscale, 4, 278, 10.1039/C1NR11191D
Li, 2009, Honeycomb-patterned hybrid films and their template applications via a tunable amphiphilic block polymer/inorganic precursor system, Chem Mater, 21, 4977, 10.1021/cm902357m
Kon, 2010, Preparation of patterned zinc oxide films by breath figure templating, Langmuir, 26, 12173, 10.1021/la904897m
Lee, 2009, Highly entangled carbon nanotube scaffolds by self-organized aqueous droplets, Soft Matter, 5, 2343, 10.1039/B817477F
Wu, 2008, Fabrication of microlens array diffuser films with controllable haze distribution by combination of breath figures and replica molding methods, Opt Express, 16, 19978, 10.1364/OE.16.019978
Zander, 2007, Super-hydrophobic surfaces via micrometer-scale templated pillars, Chem Mater, 19, 6145, 10.1021/cm0715895
Galeotti, 2009, Breath figures-mediated microprinting allows for versatile applications in molecular biology, Eur Polym J, 45, 3027, 10.1016/j.eurpolymj.2009.08.009
Galeotti, 2011, CdTe nanocrystal assemblies guided by breath figure templates, Soft Matter, 7, 3832, 10.1039/c1sm05148b
Han, 2012, Fabrication of conducting polypyrrole film with microlens arrays by combination of breath figures and replica molding methods, Polymer, 53, 2599, 10.1016/j.polymer.2012.04.049
Bormashenko, 2006, Template-assisted crystallization and colloidal self-assembly with use of the polymer micrometrically scaled honeycomb template, Colloids Surf A, 290, 273, 10.1016/j.colsurfa.2006.05.034
Bormashenko, 2012, Honeycomb structures obtained with breath figures self-assembly allow water/oil separation, Colloids Surf A, 415, 394, 10.1016/j.colsurfa.2012.09.022
Li, 2011, Preparation of honeycomb porous solid oxide fuel cell cathodes by breath figures method, Int J Hydrogen Energy, 36, 7641, 10.1016/j.ijhydene.2011.03.118
Bhadra, 2010, Hyperbranched poly(benzimidazole-co-benzene) with honeycomb structure as a membrane for high-temperature proton-exchange membrane fuel cells, J Power Sources, 195, 2470, 10.1016/j.jpowsour.2009.11.083
Bhadra, 2011, New hyperbranched polymers for membranes of high-temperature polymer electrolyte membrane fuel cells: determination of the crystal structure and free-volume size, J Appl Polym Sci, 121, 923, 10.1002/app.33637
Wan, 2011, Ordered microporous membranes templated by breath figures for size-selective separation, J Am Chem Soc, 134, 95, 10.1021/ja2092745