Towards Microcapsules with Improved Barrier Properties

Springer Science and Business Media LLC - Tập 375 - Trang 1-18 - 2017
Alexandra Latnikova1, Monika Jobmann1
1Fraunhofer Institute for Applied Polymer Research, Potsdam-Golm, Germany

Tóm tắt

Microencapsulation is the generic term for numerous technologies, which are often used when the release rate of an active substance in a medium has to be controlled and/or contact between the active substance and the medium has to be prevented. This is achieved by wrapping the tiny particles or droplets of the active substance (capsule core) with a thin layer, or membrane, of another material (capsule shell). The permeability of the membrane determines whether, how fast and under which conditions the active material will be released and/or the components of the medium will enter the inner part of the capsule. Insofar as application is concerned, premature release of an active substance from microcapsules during storage is a very common problem. Prevention of diffusion of an active component or components of the outer medium through the capsule membrane is a complex challenge, which so far cannot be considered as solved. This review briefly covers the theoretical aspects of release kinetics from microcapsules and discusses how such parameters as capsule average size, capsule shell thickness as well as the chemical composition of active material and medium can influence the release profiles. All theoretical considerations are based on the dissolution-diffusion mechanism classically used for the explanation of diffusion trough flat membranes/films. In the second part of the manuscript it is discussed, which strategies have been used for the improvement of the barrier properties of microcapsules up to date and to which extent those strategies were successful.

Tài liệu tham khảo

Wijmans JG, Baker RW (1995) The solution-diffusion model: a review. J Membr Sci 107(1–2):1–21 Satpathy G, Rosenberg M (2003) Encapsulation of chlorothiazide in whey proteins: effects of wall-to-core ratio and cross-linking conditions on microcapsule properties and drug release. J Microencapsul 20(2):227–245 Yow HN et al (2009) Dye diffusion from microcapsules with different shell thickness into mammalian skin. Eur J Pharm Biopharm 72(1):62–68 Dowding PJ et al (2004) Oil core–polymer shell microcapsules prepared by internal phase separation from emulsion droplets. I. Characterization and release rates for microcapsules with polystyrene shells. Langmuir 20(26):11374–11379 Li Z-Z et al (2006) Controlled release of avermectin from porous hollow silica nanoparticles: influence of shell thickness on loading efficiency, UV-shielding property and release. J Control Release 111(1–2):81–88 Hansen CM (2007) Hansen solubility parameters: a user’s handbook, 2nd edn. CRC, Boca Raton, ISBN: 0-8493-1525-5 Flory PJ (1942) Thermodynamics of high polymer solutions. J Chem Phys 10(1):51–61 Flory PJ (1950) Statistical mechanics of swelling of network structures. J Chem Phys 18(1):108–111 Burke J (1984) Solubility parameters: theory and application. In: Jensen C (ed) AIC Book and Paper Group Annual. vol. 3, pp 13–58 Chen PW, Erb RM, Studart AR (2012) Designer polymer-based microcapsules made using microfluidics. Langmuir 28(1):144–152 Yong CS et al (2006) Retarded dissolution of ibuprofen in gelatin microcapsule by cross-linking with glutaradehyde. Arch Pharmacal Res 29(6):520–524 Yang YH et al (2012) Improving oxygen barrier and reducing moisture sensitivity of weak polyelectrolyte multilayer thin films with crosslinking. Rsc Adv 2(32):12355–12363 Shan XL et al (2009) Fabrication and characterization of microencapsulated n-octadecane with an acrylic co-polymeric shell. Acta Phys Chim Sin 25(12):2590–2596 Elia R et al (2015) Encapsulation of volatile compounds in silk microparticles. J Coat Technol Res 12(4):793–799 Hofmeister I, Landfester K, Taden A (2014) pH-sensitive nanocapsules with barrier properties: fragrance encapsulation and controlled release. Macromolecules 47(16):5768–5773 Nordstierna L et al (2010) Comparison of release behaviour from microcapsules and microspheres. Prog Org Coat 69(1):49–51 Mercadé-Prieto R et al (2012) Determination of the shell permeability of microcapsules with a core of oil-based active ingredient. J Microencapsul 29(5):463–474 Hitchcock JP et al (2015) Long-term retention of small, volatile molecular species within metallic microcapsules. ACS Appl Mater Interfaces 7(27):14808–14815 Patchan MW et al (2012) Liquid-filled metal microcapsules. ACS Appl Mater Interfaces 4(5):2406–2412 Gao WY et al (2015) Combined situ polymerization and thermal cross-linking technique for the preparation of ammonium polyphosphate microcapsules with composite shell. J Phys Chem C 119(52):28999–29005 Jackson AC et al (2011) Silica-protected micron and sub-micron capsules and particles for self-healing at the microscale. Macromol Rapid Commun 32(1):82–87 Wu G et al (2014) Robust microcapsules with polyurea/silica hybrid shell for one-part self-healing anticorrosion coatings. J Mater Chem A 2(30):11614–11620 Yu SY, Wang XD, Wu DZ (2014) Microencapsulation of n-octadecane phase change material with calcium carbonate shell for enhancement of thermal conductivity and serving durability: synthesis, microstructure, and performance evaluation. Appl Energy 114:632–643 Li G et al (2008) Preparation of mono-dispersed polyurea–urea formaldehyde double layered microcapsules. Polym Bull 60(5):725–731 Lu SF et al (2011) Preparation and characterization of polyurea/polyurethane double-shell microcapsules containing butyl stearate through interfacial polymerization. J Appl Polym Sci 121(6):3377–3383 Kang S et al. (2015) Core–shell polymeric microcapsules with superior thermal and solvent stability. ACS Appl Mater Interfaces 7(20):10952–10956 Zieringer MA et al (2015) Microcapsules for enhanced cargo retention and diversity. Small 11(24):2903–2909 Chuanjie F, Xiaodong Z (2009) Preparation and barrier properties of the microcapsules added nanoclays in the wall. Polym Adv Technol 20(12):934–939 Dong FP et al (2017) Responsive copolymer-graphene oxide hybrid microspheres with enhanced drug release properties. Rsc Adv 7(7):3720–3726 Dao TD, Jeong HM (2016) A Pickering emulsion route to a stearic acid/graphene core-shell composite phase change material. Carbon 99:49–57 Dao TD, Jeong HM (2015) Novel stearic acid/graphene core-shell composite microcapsule as a phase change material exhibiting high shape stability and performance. Sol Energy Mater Sol Cells 137:227–234 Li M, Chen MR, Wu ZS (2014) Enhancement in thermal property and mechanical property of phase change microcapsule with modified carbon nanotube. Appl Energy 127:166–171 Patchan MW et al (2015) Robust composite-shell microcapsules via Pickering emulsification. ACS Appl Mater Interfaces 7(13):7315–7323 Long Y et al (2010) Organic-inorganic double shell composite microcapsules. Chem Commun 46(10):1718–1720 Svagan AJ et al (2016) Liquid-core nanocellulose-shell capsules with tunable oxygen permeability. Carbohyd Polym 136:292–299 Latnikova A et al (2015) Microgel containers for self-healing polymeric materials: morphology prediction and mechanism of formation. Polymer 73:183–194 Hofmeister I, Landfester K, Taden A (2015) Controlled formation of polymer nanocapsules with high diffusion-barrier properties and prediction of encapsulation efficiency. Angew Chem Int Ed 54(1):327–330 Latnikova A, Yildirim A (2015) Thermally induced release from polymeric microparticles with liquid core: the mechanism. Soft Matter 11(10):2008–2017