Tool wear measurement in turning using force ratio

Koren, 1986, Tool wear and breakage detection using a process model, Annals of CIRP, 35, 283, 10.1016/S0007-8506(07)61889-7 Choudhury, 1995, On line tool wear sensing and compensation in turning, J. Mater. Process. Technol., 49, 247, 10.1016/0924-0136(94)01350-A Rao, 1986, Tool wear monitoring through dynamics of stable turning, J. Eng. Ind., 108, 183, 10.1115/1.3187062 Akgerman, 1991, The use of cutting force spectrum for tool wear compensation during turning, 517 Danai, 1987, A dynamic state model for on-line tool wear estimation in turning, J. Eng. Ind., 109, 396, 10.1115/1.3187145 Kaye, 1995, Predicting tool flank wear using spindle speed change, Int. J. Mach. Tools Manufact., 35, 1309, 10.1016/0890-6955(94)E0031-D Caprino, 1996, Effect of tool wear on cutting forces in orthogonal cutting of uni-directional glass fiber reinforced plastics, Composites Part A, 27A, 409, 10.1016/1359-835X(95)00034-Y Cuppini, 1990, Tool wear monitoring based on cutting power measurement, Wear, 139, 303, 10.1016/0043-1648(90)90052-C Yellowley, 1993, Use of force ratios in the tracking of tool wear in turning, J. Eng. Ind., 115, 370, 10.1115/1.2901676 Elbestawi, 1991, In-process monitoring of tool wear in milling using force signature, Int. J. Mach. Tools Manufact., 31, 55, 10.1016/0890-6955(91)90051-4 Oraby, 1991, Development of models for tool wear force relationships in metal cutting, Int. J. Mech. Sci., 33, 125, 10.1016/0020-7403(91)90062-8 Asibu, 1985, A transport–diffusion equation in metal cutting and its application to the analysis of the rate of flank wear, J. Eng. Ind., 107, 81, 10.1115/1.3185971 Taylor, 1962, The tool wear time relationship in metal cutting, Int. J. Mach. Tools Manufact., 2, 119, 10.1016/0020-7357(62)90002-1 Choudhury, 1999, A scheme of adaptive turning operation, J. Mater. Process. Technol., 87, 119, 10.1016/S0924-0136(98)00342-2 Montgomery, 1976