Tool wear characteristics in machining of nickel-based superalloys
Tóm tắt
Từ khóa
Tài liệu tham khảo
Pollock, 2006, Nickel-based superalloys for advanced turbine engines: chemistry, microstructure, and properties, Journal of Propulsion and Power, 22, 361, 10.2514/1.18239
D. Shifler, Future research directions to understanding factors influencing advanced high temperature materials, 2009 DoD Corrosion Conference (2009) pp. 1–26.
Hanasaki, 1990, Tool wear of coated tools when machining a high nickel alloy, Annuals of the CIRP, 39, 77, 10.1016/S0007-8506(07)61006-3
Ulutan, 2011, Machining induced surface integrity in titanium and nickel alloys: a review, International Journal of Machine Tools and Manufacture, 51, 250, 10.1016/j.ijmachtools.2010.11.003
Tan, 1986, Groove wear of tools in NC turning of pure nickel, Annals of the CIR, 35, 71, 10.1016/S0007-8506(07)61841-1
Habeeb, 2008, Investigating of tool wear, tool life and surface roughness when machining of nickel alloy 242 with using of different cutting tools, Asian Journal of Scientific Research, 1, 222, 10.3923/ajsr.2008.222.230
Bahatia, 1978, Thermal cracking of carbide tools during intermittent cutting, Wear, 51, 201, 10.1016/0043-1648(78)90260-0
Zhang, 2009, A new approach to cutting temperature prediction considering the diffusion layer in coated tools, International Journal of Machine Tools and Manufacture, 49, 619, 10.1016/j.ijmachtools.2009.01.010
Ezugwu, 1998, The machinability of nickel-based alloys: a review, Journal of Materials Processing Technology, 86, 1, 10.1016/S0924-0136(98)00314-8
Dudzinski, 2004, A review of developments towards dry and high speed machining of Inconel 718 alloy, International Journal of Machine Tools and Manufacture, 44, 439, 10.1016/S0890-6955(03)00159-7
Grzesik, 2001, An investigation of the thermal effects in orthogonal cutting associated with multilayer coatings, Annals of the CIRP, 50, 53, 10.1016/S0007-8506(07)62069-1
Thakur, 2009, Study on the machinability characteristics of superalloy Inconel 718 during high speed turning, Materials and Design, 30, 1718, 10.1016/j.matdes.2008.07.011
Bhatt, 2010, Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718, Tribology International, 43, 1113, 10.1016/j.triboint.2009.12.053
Costes, 2007, Tool-life and wear mechanisms of CBN tools in machining of Inconel 718, International Journal of Machine Tools and Manufacture, 47, 1081, 10.1016/j.ijmachtools.2006.09.031
Brandt, 1990, Wear mechanisms of ceramic cutting tools when machining ferrous and non-ferrous alloys, Journal of the European Ceramic Society, 6, 273, 10.1016/0955-2219(90)90019-C
Bhattacharyya, 1983, Wear mechanisms of Syalon ceramic tools when machining nickel-based materials, Metals Technology, 10, 482, 10.1179/030716983803291415
Deng, 2005, Failure mechanisms of TiB2 particle and SiC whisker reinforced Al2O3 ceramic cutting tools when machining nickel-based alloys, International Journal of Machine Tools and Manufacture, 45, 1393, 10.1016/j.ijmachtools.2005.01.033
Kumar, 2006, Wear behaviour of alumina based ceramic cutting tools on machining steels, Tribology International, 39, 191, 10.1016/j.triboint.2005.01.021
Remadna, 2006, Evolution during time of tool wear and cutting forces in the case of hard turning with CBN inserts, Journal of Materials Processing Technology, 178, 67, 10.1016/j.jmatprotec.2005.03.038
El-Bestawi, 1993, Performance of whisker-reinforced ceramic tools in milling nickel-based alloy, Annals of the CIRP, 42, 99, 10.1016/S0007-8506(07)62401-9
Devillez, 2007, Cutting forces and wear in dry machining of Incone1 718 with coated carbide tools, Wear, 262, 931, 10.1016/j.wear.2006.10.009
Song, 2010, Failure mechanism of carbide tool in high speed milling of Inconel 718, Advanced Materials Research, 97–101, 1920, 10.4028/www.scientific.net/AMR.97-101.1920
Huang, 2004, Modeling of CBN tool flank wear progression in finish hard turning, Transactions of the ASME, 126, 98
Rabinowicz, 1961, A study of abrasive wear under three-body conditions, Wear, 4, 345, 10.1016/0043-1648(61)90002-3
Kannatey-Asibu, 1985, A transport-diffusion equation in metal cutting and its application to analysis of the rate of flank wear, Journal of Engineering for Industry: Transactions of the ASME, 107, 81, 10.1115/1.3185971
Archard, 1980, Wear theory and mechanisms, 35
Chen, 2003, Study on wear mechanisms in drilling of Inconel 718 superalloy, Journal of Materials Processing Technology, 140, 269, 10.1016/S0924-0136(03)00792-1
Li, 2006, An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts, Journal of Materials Processing Technology, 180, 296, 10.1016/j.jmatprotec.2006.07.009
Altin, 2007, The effects of cutting speed on tool wear and tool life when machining Inconel 718 with ceramic tools, Materials and Design, 28, 2518, 10.1016/j.matdes.2006.09.004
Liao, 2008, Behaviors of end milling Inconel 718 superalloy by cemented carbide tools, Journal of Materials Processing Technology, 201, 460, 10.1016/j.jmatprotec.2007.11.176
Khidhir, 2010, Machining of nickel based alloys using different cemented carbide tools, Journal of Engineering Science and Technology, 5, 264
Zheng, 2012, Cutting performance and wear mechanisms of Sialon–Si3N4 graded nano-composite ceramic cutting tools, International Journal of Advanced Manufacturing Technology, 58, 19, 10.1007/s00170-011-3379-2
Kurada, 1997, A review of machine vision sensors for tool condition monitoring, Computers in Industry, 34, 55, 10.1016/S0166-3615(96)00075-9
Wang, 2007, Sensor fusion for online tool condition monitoring in milling, International Journal of Production Research, 45, 5095, 10.1080/00207540500536913
Bamdyopadhyay, 1986, A feasibility study of on-line drill wear monitoring by DDS methodology, International Journal of Machine Tool Design and Research, 26, 245, 10.1016/0020-7357(86)90003-X
Lee, 1989, On the correlation between dynamic cutting force and tool wear, International Journal of Machine Tools and Manufacture, 29, 295, 10.1016/0890-6955(89)90001-1
Li, 1992, Process wear and breakage monitoring for a machining center based on cutting force parameter, International Journal of Machine Tools and Manufacture, 32, 855, 10.1016/0890-6955(92)90035-F
Lin, 1996, Tool wear monitoring in face milling using force signals, Journal of Material Processing Technology, 198, 136
Choudhury, 2000, In-process tool wear estimation in milling using cutting force model, Journal of Materials Processing Technology, 99, 113, 10.1016/S0924-0136(99)00396-9
El-Bestawi, 1991, Process monitoring of tool wear in milling using cutting force signal, International Journal of Machine Tools and Manufacture, 31, 55, 10.1016/0890-6955(91)90051-4
Dimla, 2000, On-line metal cutting condition monitoring I: Force and vibration analyses, International Journal of Machine Tools and Manufacture, 40, 739, 10.1016/S0890-6955(99)00084-X
Sarhan, 2001, Interrelationships between cutting force variation and tool wear in end-milling, Journal of Materials Processing Technology, 109, 229, 10.1016/S0924-0136(00)00803-7
Kuljanic, 2005, TWEM, a method based on cutting forces monitoring tool wear in face milling, International Journal of Machine Tools and Manufacture, 45, 29, 10.1016/j.ijmachtools.2004.06.016
Lee, 2007, Tool wear monitoring system for CNC end milling using a hybrid approach to cutting force regulation, International Journal of Advanced Manufacturing Technology, 32, 8, 10.1007/s00170-005-0350-0
Martinho, 2008, Cutting forces and wear analysis of Si3N4 diamond coated tools in high speed Machining, Vacuum, 82, 1415, 10.1016/j.vacuum.2008.03.065
Kaya, 2011, Force-torque based on-line tool wear estimation system for CNC milling of Inconel 718 using neural networks, Advances in Engineering Software, 42, 76, 10.1016/j.advengsoft.2010.12.002
Tansel, 2012, Detecting chatter and estimating wear from the torque of end milling signals by using Index Based Reasoner (IBR), International Journal of Advanced Manufacturing Technology, 58, 109, 10.1007/s00170-010-2838-5
Mathew, 2008, An effective sensor for tool wear monitoring in face milling: acoustic emission, Sadhana, 33, 227, 10.1007/s12046-008-0016-3
Kitagawa, 1997, Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti–6Al–6V–2Sn, Wear, 202, 142, 10.1016/S0043-1648(96)07255-9
Orhan, 2007, Tool wear evaluation by vibration analysis during end milling of AISI D3 cold work tool steel with 35 HRC hardness, NDT & E International, 40, 121, 10.1016/j.ndteint.2006.09.006
Shao, 2004, A cutting power model for tool wear monitoring in milling, International Journal of Machine Tools and Manufacture, 44, 1503, 10.1016/j.ijmachtools.2004.05.003
Zhu, 2009, Wavelet analysis of sensor signals for tool condition monitoring: a review and some new results, International Journal of Machine Tools and Manufacture 49(7-8), 537, 10.1016/j.ijmachtools.2009.02.003
Liao, 1996, Carbide tool wear mechanism in turning of Inconel 718 superalloy, Wear, 193, 16, 10.1016/0043-1648(95)06644-6
I.K. Choudhury, M.A. El-Baradie, Machining nickel base superalloys: Inconel 718, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 212(3) (1998) 195–206.
Li, 2009, A tool wear observer model for flank wear monitoring in the milling of Nickel-based alloys, International Journal of Mechatronics and Manufacturing Systems, 2, 620, 10.1504/IJMMS.2009.028084
Fang, 2011, Effect of tool edge wear on the cutting forces and vibrations in high-speed finish machining of Inconel 718: an experimental study and wavelet transform analysis, International Journal of Advanced Manufacturing Technology, 52, 65, 10.1007/s00170-010-2703-6
Sun, 2009, Characteristics of cutting forces and chip formation in machining of titanium alloys, International Journal of Machine Tools and Manufacture, 49, 561, 10.1016/j.ijmachtools.2009.02.008
Mativenga, 2005, An experimental study of cutting forces in high-speed end mMilling and implications for dynamic force modeling, Journal of Manufacturing Science and Engineering, 127, 251, 10.1115/1.1863254
Nuawi, 2007, Integration of I-kaz coefficient and Taylor tool life curve for tool wear progression monitoring in machining process, International Journal of Mechanics, 3, 45
M.Z. Nuawi, S. Abdullah, A.R. Ismail, N.F. Kamaruddin, Novel Analysis (I-KAZ 3D) for Three Axial Vibration Signal in Bearing Condition Monitoring, Proceedings of the 7th WSEAS International Conference on System and Simulation in Engineering (2008) 318–322.
T. Aruvali, R. Serg, T. Otto, In-process vibration monitoring on CNC lathe, 10th International Symposium “Topical Problems in the Field of Electrical and Power Engineering”, Pärnu, Estonia, January 10–15 (2011) 174–178.
Ghani, 2009, New regression model and I-Kaz method for online cutting tool wear monitoring, World Academy of Science, Engineering and Technology, 60, 420
Ghani, 2011, Online tool wear monitoring using portable digital assistant (PDA), International Journal of the Physical Sciences, 6, 4064
Kaye, 1995, Predicting tool flank wear using spindle speed change, International Journal of Machine Tools and Manufacture, 35, 1309, 10.1016/0890-6955(94)E0031-D
Oktem, 2005, Application of response surface methodology in the optimization of cutting conditions for surface roughness, Journal of Material Processing and Technology, 170, 11, 10.1016/j.jmatprotec.2005.04.096
Sivasakthivel, 2010, Prediction of tool wear from machining parameters by response surface methodology in end milling, International Journal of Engineering Science and Technology, 2, 1780
Mandal, 2011, Development of flank wear prediction model of Zirconia Toughened Alumina (ZTA) cutting tool using response surface methodology, International Journal of Refractory Metals and Hard Materials, 29, 273, 10.1016/j.ijrmhm.2010.12.001
Palanisamy, 2008, Prediction of tool wear using regression and ANN models in end-milling operation, International Journal of Advanced Manufacturing Technology, 37, 29, 10.1007/s00170-007-0948-5
Tsai, 2005, A predicted modeling of tool life of high-speed milling for SKD61 tool steel, International Journal of Advanced Manufacturing Technology, 26, 711, 10.1007/s00170-003-1596-z
Ghosh, 2007, Estimation of tool wear during CNC milling using neural network-based sensor fusion, Mechanical Systems and Signal Processing, 21, 466, 10.1016/j.ymssp.2005.10.010
Chang, 2007, The optimal cutting-parameter selection of heavy cutting process in side milling for SUS304 stainless steel, International Journal of Advanced Manufacturing Technology, 34, 440, 10.1007/s00170-006-0630-3
Kishawy, 2011, Modeling of tool wear during hard turning with self-propelled rotary tools, International Journal of Mechanical Sciences, 53, 1015, 10.1016/j.ijmecsci.2011.08.009
Jawahir, 1995, An investigation of the effects of chip flow on tool wear in machining with complex grooved tools, Wear, 184, 145, 10.1016/0043-1648(94)06572-1
Arsecykaratne, 1996, Prediction of tool life in oblique machining with nose radius tools, Wear, 198, 220, 10.1016/0043-1648(96)06975-X
Arsecykaratne, 2003, On prediction of tool life and tool deformation conditions in machining with restricted contact tools, International Journal of Machine Tools and Manufacture, 43, 657, 10.1016/S0890-6955(03)00039-7
Arsecykaratne, 2004, Prediction of tool life for restricted contact and grooved tools based on equivalent feed, International Journal of Machine Tools and Manufacture, 44, 1271, 10.1016/j.ijmachtools.2004.04.022
Arsecykaratne, 2006, Wear and tool life of tungsten carbide, PCBN and PCD cutting tools, International Journal of Machine Tools and Manufacture, 46, 482, 10.1016/j.ijmachtools.2005.07.015
Taylor, 1997, On the art of metals, Transactions of ASME, 28, 31
Huang, 2005, Tool crater wear depth modeling in CBN hard turning, Wear, 258, 1455, 10.1016/j.wear.2004.08.010
Molinary, 2002, Modeling of tool wear by diffusion in metal cutting, Wear, 252, 135, 10.1016/S0043-1648(01)00858-4
Luo, 2005, Modeling flank wear of carbide tool insert in metal cutting, Wear, 259, 1235, 10.1016/j.wear.2005.02.044
Karmakar, 1996, An approach towards fatigue wear modeling, Wear, 198, 242, 10.1016/0043-1648(96)06984-0
Yang, 2007, Modeling transient adhesive wear of tungsten carbide inserts tested with an angular setting, Tribology International, 40, 1075, 10.1016/j.triboint.2006.10.005
Elleuch, 2005, Experimental and modelling aspects of abrasive wear of A357 aluminum alloy under gross slip fretting conditions, Wear, 258, 40, 10.1016/j.wear.2004.04.010
Quinn, 1998, Oxidational wear modelling Part III, The effects of speed and elevated temperatures, Wear, 216, 262
Filice, 2007, Wear modelling in mild steel orthogonal cutting when using uncoated carbide tools, Wear, 262, 545, 10.1016/j.wear.2006.06.022
J. Lorentzon, N. Jarvstrat, Tool wear geometry updating in Inconel 718 turning simulations, Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia (2006) pp. 491–498.
Lorentzon, 2009, Modelling the influence of carbides on tool wear, Archives of Computational Materials Science and Surface Engineering, 1, 29
Usui, 1978, Analytical prediction of three dimensional cutting process. Part 3. Cutting temperature and crater wear of carbide tool, Journal of Engineering for Industry: Transactions of the ASME, 100, 222, 10.1115/1.3439413
Ezugwu, 2005, Key improvements in the machining of difficult-to-cut aerospace superalloys, International Journal of Machine Tools and Manufacture, 45, 1353, 10.1016/j.ijmachtools.2005.02.003
Liu, 2006, Experimental studies on machinability of six kinds of nickel-based superalloys, International Journal of Machining and Machinability of Materials, 1, 287, 10.1504/IJMMM.2006.011372
Aspinwall, 2007, The influence of cutter orientation and workpiece angle on machinability when high-speed milling Inconel 718 under finishing conditions, International Journal of Machine Tools and Manufacture, 47, 1839, 10.1016/j.ijmachtools.2007.04.007
Nalbant, 2007, The effect of cutting speed and cutting tool geometry on machinability properties of nickel-base Inconel 718 superalloys, Materials and Design, 28, 1334, 10.1016/j.matdes.2005.12.008
M'Saoubi, 1999, Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels, Journal of Materials Processing Technology, 96, 225, 10.1016/S0924-0136(99)00359-3
Komanduri, 1986, On shear instability in machining a nickel–iron base superalloy, Journal of Engineering for Industry: Transactions of the ASME, 108, 93, 10.1115/1.3187056
Byrne, 1991, Tool life scatter when milling with TiN-coated HSS indexible inserts, Annals of the CIRP, 40, 45, 10.1016/S0007-8506(07)61930-1
Alauddin, 1998, Cutting forces in the end milling of Inconel 718, Journal of Materials Processing Technology, 77, 153, 10.1016/S0924-0136(97)00412-3
Ezugwu, 2001, Wear performance of multiplayer coated carbide tools, Machining Science and Technology, 5, 115, 10.1081/MST-100103181
Kessler, 1999, Microstructure and property changes caused by diffusion during CVD coating of steels, Surface and Coatings Technology 120–121, 366, 10.1016/S0257-8972(99)00386-2
Dahan, 2000, Diffusion in Ti/TiC multilayer coatings, Thin Solid Films, 377–378, 687, 10.1016/S0040-6090(00)01282-7
Martinsons, 1998, Recent progress in the measurement of the thermal properties of hard coatings, Thin Solid Films, 317, 455, 10.1016/S0040-6090(97)00666-4
Li, 2008, Diffusion layer growth at Zn/Cu interface under uniform and gradient high magnetic fields, Materials Science and Engineering, 459, 244, 10.1016/j.msea.2007.10.096
Grzesik, 2006, Composite layer-based analytical models for tool–chip interface temperatures in machining medium carbon steels with multi-layer coated cutting tools, Journal of Materials Processing Technology, 176, 102, 10.1016/j.jmatprotec.2006.02.025
Aruna, 2010, Wear analysis of ceramic cutting tools in finish turning of Inconel 718, International Journal of Engineering Science and Technology, 2, 4253
Richards, 1989, Use of ceramic tools for machining nickel based alloys, International Journal of Machine Tools and Manufacture, 29, 575, 10.1016/0890-6955(89)90072-2
Gatto, 1997, Advanced coated ceramic tools for machining superalloys, International Journal of Machine Tools and Manufacture, 37, 591, 10.1016/S0890-6955(96)00075-2
Krain, 2007, Optimization of tool life and productivity when end milling Inconel 718, Journal of Materials Processing Technology, 189, 153, 10.1016/j.jmatprotec.2007.01.017
Sharman, 2001, Tool life when high speed ball nose end milling Inconel 718, Journal of Materials Processing Technology, 118, 29, 10.1016/S0924-0136(01)00855-X
Ng, 2006, The effect of cutting environments when high speed ball nose end milling Inconel 718, Intermetallics and Superalloys, 10, 71, 10.1002/3527607285.ch12
Pawade, 2007, An investigation of cutting forces and surface damage in high-speed turning of Inconel 718, Journal of Materials Processing Technology, 192, 139, 10.1016/j.jmatprotec.2007.04.049
Sharman, 2008, Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222, 653, 10.1243/09544054JEM936
Vagnorius, 2011, Effect of high-pressure cooling on life of SiAlON tools in machining of Inconel 718, International Journal of Advanced Manufacturing Technology, 54, 83, 10.1007/s00170-010-2944-4
E.O. Ezugwu, J. Bonney, Effect of high-pressure coolant supply when machining nickel-base, Inconel 718, alloy with coated carbide tools, in: Proceedings of AMPT2003, 8–11 July (2003a) Dublin, Ireland, pp.787–790.
Ezugwu, 2003, Effect of high-pressure coolant supplies when machining nickel-base, Inconel 718, alloy with ceramic tools, Tribology Transactions, 4, 564
Obikawa, 2008, Micro-liter lubrication machining of Inconel 718, International Journal of Machine Tools and Manufacture, 48, 1605, 10.1016/j.ijmachtools.2008.07.011
Thamizhmanii, 2009, A study of minimum quantity lubrication on Inconel 718 steel, Archives of Materials Science and Engineering, 39, 38
Evans, 1991, Cryogenic diamond turning of stainless steel, Annals of the CIRP, 40, 571, 10.1016/S0007-8506(07)62056-3
Vernaza-Pena, 2002, Experimental study of the temperature field generated during orthogonal machining of an aluminum alloy, Experimental Mechanics, 42, 221, 10.1007/BF02410886
Moriwaki, 1993, Combined stress, material flow and heat analysis of orthogonal micromachining of copper, CIRP Annals-Manufacturing Technology, 42, 75, 10.1016/S0007-8506(07)62395-6
Sato, 2007, An experimental technique for the measurement of temperature on CBN tool face in end milling, International Journal of Machine Tools and Manufacture, 47, 2071, 10.1016/j.ijmachtools.2007.05.006
Obikawa, 2012, Air jet assisted machining of nickel-base superalloy, International Journal of Machine Tools and Manufacture, 61, 20, 10.1016/j.ijmachtools.2012.05.005
Bermingham, 2012, Understanding the tool wear mechanism during thermally assisted machining Ti–6Al–4V, International Journal of Machine Tools and Manufacture, 62, 76, 10.1016/j.ijmachtools.2012.07.001
Rahman, 1997, The machinability of Inconel 718, Journal of Materials Processing Technology, 63, 199, 10.1016/S0924-0136(96)02624-6
Anderson, 2006, Laser-assisted machining of Inconel 718 with an economic analysis, International Journal of Machine Tools and Manufacture, 46, 1879, 10.1016/j.ijmachtools.2005.11.005
Hsu, 2008, Machining characteristics of Inconel 718 using ultrasonic and high temperature-aided cutting, Journal of Materials Processing Technology, 198, 359, 10.1016/j.jmatprotec.2007.07.015
Ding, 2012, Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys, Journal of Materials Processing Technology, 212, 601, 10.1016/j.jmatprotec.2011.07.016
Shao, 2010, Thermodynamical matching of alumina-based composite ceramic tools with typical workpiece materials, International Journal of Advanced Manufacturing Technology, 49, 567, 10.1007/s00170-009-2413-0
Fox-Rabinovich, 2006, Tooling materials and some features of their self-organisation: adaptive tooling materials
Ozel, 2012, Prediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations, Annals of the CIRP, 61, 547, 10.1016/j.cirp.2012.03.100
Ee, 2005, Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius, International Journal of Mechanical Sciences, 47, 1611, 10.1016/j.ijmecsci.2005.06.001
Arunachalam, 2004, Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools, International Journal of Machine Tools and Manufacture, 44, 879, 10.1016/j.ijmachtools.2004.02.016
Subhas, 2000, Simultaneous optimization of machining parameters for dimensional instability control in aero gas turbine components made of Inconel 718 alloy, Transactions of ASME, Journal of Manufacturing Science and Engineering, 122, 586, 10.1115/1.1287591