Tips and tricks for characterizing shape memory wire part 5: Full-field strain measurement by digital image correlation
Tóm tắt
This is the fifth paper in a series on the experimental characterization of shape memory alloy (SMA) wires. In this installment we focus on the use of digital image correlation (DIC) to measure the strain field on the surface of the wire. After a brief overview of the principles and mathematics behind DIC, two different thermo-mechanical tension tests using DIC are presented to demonstrate the technique. The first experiment consists of Joule heating a shape memory (SM) wire to induce the shape memory effect, using 2-D DIC to measure the strain field. The second experiment measures the response of a superelastic (SE) wire to mechanical cycling at room temperature, using 3-D DIC to measure the strain field and an infrared camera to measure the temperature field. In addition to describing the experimental results, attention is paid to specimen preparation and the two experimental setups. Many of the challenges and precautions associated with using DIC are discussed, along with practical recommendations for specimen speckle patterns, digital photography, and data post processing.
Tài liệu tham khảo
Shaw, J.A., Churchill, C.B., and Iadicola, M.A., “Tips and Tricks for Characterizing Shape Memory Alloy Wire: Part 1 – Differential Scanning Calorimetry & Basic Phenomena,” Tips and Tricks for Characterizing Shape Memory Alloy Wire: Part 1 – Differential Scanning Calorimetry & Basic Phenomena 32(5):55–62 (2008).
Churchill, C.B., Shaw J.A., and Iadicola, M.A., “Tips and Tricks for Characterizing Shape Memory Alloy Wire: Part 2 – Fundamental Isothermal Responses,” Tips and Tricks for Characterizing Shape Memory Alloy Wire: Part 2 – Fundamental Isothermal Responses 33(1):51–62 (2009).
Churchill, C.B., Shaw, J.A., and Iadicola, M.A., “Tips and Tricks for Characterizing Shape Memory Alloy Wire: Part 3 – Localization And Propagation Phenomena,” Tips and Tricks for Characterizing Shape Memory Alloy Wire: Part 3 – Localization And Propagation Phenomena 33(5):70–78 (2009).
Churchill, C.B., Shaw, J.A., and Iadicola, M.A., “Tips and Tricks for Characterizing Shape Memory Alloy Wire: Part 4 – Thermo-Mechanical Coupling,” Tips and Tricks for Characterizing Shape Memory Alloy Wire: Part 4 – Thermo-Mechanical Coupling 34(2):63–80 (2010).
Sutton, M.A., Orteu, J.J., and Schreier, H.W., Image Correlation for Shape, Motion, and Deformation Measurements: Basic Concepts, Theory, and Applications, Springer, New York (2009).
Daly, S., “Digital Image Correlation in Experimental Mechanics for Aerospace Materials and Structures,” Encyclopedia of Aerospace Engineering, Wiley and Sons (2010).
Réthoré, J., Hild, F., and Roux, S., “Extended Digital Image Correlation with Crack Shape Optimization,” Extended Digital Image Correlation with Crack Shape Optimization 73:248–272 (2008).
Poissant, J., and Barthelat, F., “A Novel “Subset Splitting” Procedure for Digital Image Correlation on Discontinuous Displacement Fields,” Experimental Mechanics 50:353–364 (2010). DOI: 10.1007/s11340-009-9220-2.
Peters, W.H., and Ranson, W.F., “Digital Imaging Techniques in Experimental Stress Analysis,” Digital Imaging Techniques in Experimental Stress Analysis 21(3):427–432 (1982).
Sutton, M.A., Wolters, W.J., Peters, W.H., Ranson, W.F., and McNeill, S.R., “Determination of Displacements Using an Improved Digital Correlation Method,” Determination of Displacements Using an Improved Digital Correlation Method 1(3):133–139 (1983).
Peters, W.H., Ranson, W.F., Sutton, M.A., Chu, T.C., and Anderson, J., “Application of Digital Correlation Methods to Rigid Body Mechanics,” Application of Digital Correlation Methods to Rigid Body Mechanics 22:738–742 (1983).
Luo, P., Chao, Y., Sutton, M., and Peters, W., “Accurate Measurement of Three-dimensional Deformations in Deformable and Rigid Bodies Using Computer Vision,” Accurate Measurement of Three-dimensional Deformations in Deformable and Rigid Bodies Using Computer Vision 33(2):123–132 (1993).
Faugeras O., Three-Dimensional Computer Vision: A Geometric Viewpoint, MIT Press, Cambridge, MA (1993).
Helm, J.D., McNeill, S.R., and Sutton, M.A., “Improved Three-dimensional Image Correlation for Surface Displacement Measurement,” Improved Three-dimensional Image Correlation for Surface Displacement Measurement 35:1911–1920 (1996).
Bay, B., Smith, T., Fyhrie, D., and Saad, M., “Digital Volume Correlation: Three-dimensional Strain Mapping Using X-ray Tomography,” Experimental Mechanics 39:217–226 (1999). DOI: 10.1007/BF02323555.
Franck, C., Hong, S., Maskarinec, S., Tirrell, D., and Ravichandran, G., “Three-dimensional Full-field Measurements of Large Deformations in Soft Materials Using Confocal Microscopy and Digital Volume Correlation,” Experimental Mechanics 47:427–438 (2007). DOI: 10.1007/s11340-007-9037-9.
Sutton, M.A., McNeill, S.R., Helm, J.D., and Chao, Y.J., “Advances in Two-dimensional and Three-dimensional Computer Vision,” Photomechanics, Topics Applied Physics, Volume 77, Springer Verlag, pp. 323–372 (2000).
Schreier, H.W., Garcia, D., and Sutton M.A. “Advances in Light Microscope Stereo Vision,” Experimental Mechanics 44:278–288 (2004).
Schreier, H.W., Braasch, J.R., and Sutton, M.A., “Systematic Errors in Digital Image Correlation Caused by Intensity Interpolation,” Systematic Errors in Digital Image Correlation Caused by Intensity Interpolation 39(11):2915–2921 (2000).
Sutton, M.A., Yan, J.H., Tiwari, V. Schreier, H.W., and Orteu, J.J. “The Effect of Out-of-plane Motion on 2D and 3D Digital Image Correlation Measurements,” Optics and Lasers in Engineering 46(10):746–757 (2008).
Zavattieri, P.D., Savic, V. Hector, L.G., Jr., Fekete, J.R., Tong, W., and Xuan, Y., “Spatio-temporal Characteristics of the Portevin–Le Châtelier Effect in Austenitic Steel with Twinning Induced Plasticity,” Spatio-temporal Characteristics of the Portevin–Le Châtelier Effect in Austenitic Steel with Twinning Induced Plasticity 25:2298–2330 (2009).
Knauss, W.G., Chasiotis, I., and Huang, Y., “Mechanical Measurements at the Micron and Nanometer Scales,” Mechanical Measurements at the Micron and Nanometer Scales 35:217–231 (2003).
Chu, T.C., Ranson, W.F., and Sutton, M.A. “Applications of Digital-image-correlation Techniques to Experimental Mechanics,” Experimental Mechanics 25(3):232–244 (1985).
Reu, P.L., and Miller, T.J., “The Application of High-speed Digital Image Correlation,” The Application of High-speed Digital Image Correlation 43(8):673–688 (2008).
Berfield, T., Patel, J., Shimmin, R., Braun, P., Lambros, J., and Sottos, N., “Micro- and Nanoscale Deformation Measurement of Surface and Internal Planes via Digital Image Correlation,” Micro- and Nanoscale Deformation Measurement of Surface and Internal Planes via Digital Image Correlation 47(1):51–62 (2007).
Churchill, C.B., and Shaw, J.A., “Thermo-electro-mechanical Shakedown Response of Conditioned Shape Memory Alloy Wires,” Proceedings of the ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2009), ASME, Volume 1, pp. 137–148, (2009).
National Instruments (www.dasylab.com), Data Acquisition System Laboratory (DASY-Lab) Manual, DASY-Lab, Austin, TX.
Tong, W. “A Users Guide to the Yale Surface Deformation Mapping Program (SDMAP),” Technical Report, Department of Mechanical Engineering, Yale University, New Haven, CT (2004).
Tong, W. “An Evaluation of Digital Image Correlation Criteria for Strain Mapping Applications,” Strain 41(4):167–175 (2005).
Sutton, M.A., McNeill, S.R., Jang, J., and Babai, M., “Effect of Subpixel Image Restoration on Digital Correlation Error Estimates,” Effect of Subpixel Image Restoration on Digital Correlation Error Estimates 1988:870–877 (1988).
Bruck, H., McNeill, S. Sutton, M., and Peters, W., “Digital Image Correlation Using Newton-Raphson Method of Partial Differential Correction,” Digital Image Correlation Using Newton-Raphson Method of Partial Differential Correction 29(3):261–267 (1989).
Vendroux, G., and Knauss, W.G., “Submicron Deformation Field Measurements: Part 2. Improved Digital Image Correlation,” Submicron Deformation Field Measurements: Part 2. Improved Digital Image Correlation 38:86–92 (1998).
Iadicola, M.A., and Shaw, J.A., “The Effect Of Uniaxial Cyclic Deformation on the Evolution of Phase Transformation Fronts in Pseudoelastic NiTi Wire,” The Effect Of Uniaxial Cyclic Deformation on the Evolution of Phase Transformation Fronts in Pseudoelastic NiTi Wire 13(2):143–156 (2002).
Sun, H., Pathak, A., Luntz, J., Brei, D., Alexander, P.W., and Johnson, N.L., “Stabilizing Shape Memory Alloy Actuator Performance Through Cyclic Shakedown: An Empirical Study,” Porter Davis, L., Henderson, B.K., and McMickell, M.B., (eds), Proceedings of SPIE, Industrial and Commercial Applications of Smart Structures Technologies 2008, Volume 6930, SPIE, pp. 69300Q–(2008).
Correlated Solutions, Inc. (www.correlatedsolutions.com), Vic-Snap Manual, Correlated Solutions, Inc., Columbia, SC.
Correlated Solutions, Inc. (www.correlatedsolutions.com), Vic-3D Manual, Correlated Solutions, Inc., Columbia, SC.