10.1007/978-1-4612-1924-8
10.1016/0278-6125(94)90006-X
Arzi , Y and Kalir , A . 1996. “Approximating throughput of non-homogeneous multiple-parallel machines' production lines”. Tel Aviv, Israel: Department of Industrial Engineerin, Tel Aviv University. Technical Report
Biller S, 2008, IEEE Transactions on Automation Science and Engineering
10.1080/00207549008942783
Blumenfeld DE, 2005, Mathematical Problems in Engineering, 293, 10.1155/MPE.2005.293
10.1016/0925-5273(94)90069-8
10.1080/00207540050117332
Burman MH, 1995, Thesis (PhD)
Buxey GM, 1973, AIIE Transactions, 5, 37, 10.1080/05695557308974880
Buzacott JA, 1978, AIIE Transactions, 10, 197, 10.1080/05695557808975204
10.1080/07408178708975416
Buzacott JA, 1993, Stochastic models of manufacturing systems
Chen FF, 1996, Jounral of Manufacturing Systems, 15, 143, 10.1016/0278-6125(96)89567-7
Chiang S-Y, 1999, Thesis (PhD)
Chiang S-Y, 2006, Mathematical Problems in Engineering
10.1155/S1024123X0000137X
10.1155/S1024123X00001381
10.1155/S1024123X01001776
10.1080/07408178708975381
10.1007/s00291-004-0193-3
Colledani M, 2005, 5th international conference on analysis of manufacturing systems—production management
Colledani M, 2005, 5th international conference on analysis of manufacturing systems—production management
10.1080/07408179008964165
10.1080/00207549408956959
Dallery Y, 1999, 2nd internationl conference on analysis and modeling of manufacturing systems
10.1080/07408178808966181
10.1080/00207549008942719
10.1080/00207548708919865
10.1080/00207548808947892
10.1080/00207549608904910
Denardo EV, 1997, Management Science, 43, 1296, 10.1287/mnsc.43.9.1296
10.1080/00207540310001602838
Diamantidis AC, 2006, Computer & Industrial Engineering, 50, 466
10.1080/07408179108963866
10.1080/00207549408957007
10.1080/07408179208964237
Frein Y, 1996, IIE Transactions, 28, 545, 10.1080/15458830.1996.11770699
Gershwin SB, 1989, Queueing networks with blocking, 127
Gershwin SB, 1991, IIE Transactions, 23, 315, 10.1080/07408179108963865
Gershwin SB, 1994, Manufacturing systems engineering
10.1080/07408170008967448
Gershwin SB, 2003, Analysis and modeling of manufacturing systems, 10.1007/978-1-4615-1019-2
Gershwin SB, 2001, 3rd Aegean international conference on design and analysis of manufacturing systems
10.1080/00207540500385980
10.1080/00207549308956742
10.1016/S0278-6125(99)80033-8
10.1080/00207729808929586
Helber S, 1999, In: Lecture notes in economics and mathematical systems
Helber S, 2005, OR Spectrum, 27, 221, 10.1007/s00291-005-0198-6
10.1023/B:ANOR.0000011188.11019.33
Helber S, 2003, Analysis and modleing of manufacturing systems, 85, 10.1007/978-1-4615-1019-2_4
10.1080/07408179208964201
10.1080/07408170208928855
Huang N, 1998, Estimating throughput of serial production lines with identical stations
10.1080/05695557708975141
Inman RR, 1999, Production and Operation Management, 4, 409, 10.1111/j.1937-5956.1999.tb00316.x
10.1080/0020754031000077293
Iyama T, 1987, International Journal of Production Research, 25, 1157
Jacobs DA, 1993, Thesis (PhD)
10.1016/0898-1221(91)90110-P
10.1080/00207729508929067
10.1155/S1024123X9500010X
10.1155/S1024123X95000147
Jacobs DA, 1996, Recent advances in control and optimization of manufacturing systems, 121, 10.1007/BFb0015116
Jafari MA, 1987, IIE Transactions, 19, 1157
10.1080/07408178908966216
10.1080/07408179808966436
10.1080/07408179908969842
10.1080/07408170590969861
Kim DS, 2002, IEEE Transactions on Automatic Control, 47, 1134, 10.1109/TAC.2002.800653
Kim J, 2004, Thesis (PhD)
10.1007/s00291-005-0202-1
10.1080/05695558308974659
Kuhn H, 2003, Analysis and modeling of manufacturing systems, 155, 10.1007/978-1-4615-1019-2_7
Kuo C-T, 1996, Thesis (PhD)
10.1155/S1024123X96000348
Kuo C-T, 1997, Mathematical Problems in Engineering, 3, 95, 10.1155/S1024123X97000501
10.1155/S1024123X95000202
Levantesi R, 2003, Analysis and modeling of manufacturing systems, 181, 10.1007/978-1-4615-1019-2_8
Levantesi R, 2003, Analysis and modeling of manufacturing systems, 201, 10.1007/978-1-4615-1019-2_9
10.1080/07408170490458553
10.1016/j.cie.2005.01.006
10.1080/07408170600733228
10.1080/00207540500371980
10.1080/07408170601013661
Li J, 2004, Annals of Operations Research, 126, 159, 10.1023/B:ANOR.0000012279.78938.6b
Li J, 2006, Mathematical Problems in Engineering, 1, 10.1155/MPE/2006/27328
10.1080/00207540500031899
10.1155/S1024123X99001209
Li J, 2003, Analysis and modeling of manufacturing systems, 221, 10.1007/978-1-4615-1019-2_10
Li J, 2007, Production systems engineering
Liberopoulos G, 1994, IEEE Transactions on Automation Science and Engineering, 39, 889, 10.1109/9.286278
10.1016/0967-0661(93)92114-J
Liu X-G, 1989, Queueing networks with blocking, 87
10.1016/0377-2217(90)90181-A
10.1080/07408170500327352
Matta A, 2005, OR Spectrum, 27, 265, 10.1007/s00291-005-0197-7
10.1080/07408170701488037
Mocanu S, 2005, 5th international conference on analysis of manufacturing systems—production management
10.1016/S0278-6125(97)83051-8
Narahari Y, 1994, IEEE Transactions on Robotics and Automation, 10, 330, 10.1109/70.282547
Nemec JE, 1999, Thesis (PhD)
10.1080/00207540600791616
Özdo[gtilde]ru U, 2003, Analysis and modeling of manufacturing systems, 255
Papadopoulos HT, 1993, Queueing theory in manufacturing systems analysis and design
10.1016/0377-2217(95)00378-9
10.1002/(SICI)1520-6750(199810)45:7<669::AID-NAV2>3.0.CO;2-9
10.1080/07408170108936854
Proceedings of the international workshop on performance evaluation and optimization of production lines. 1997. Samos Island, Greece
Proceedings of the 2nd Aegean international conference on analysis and modeling of manufacturing systems. 1999. Tinos Island, Greece
Proceedings of the 3rd Aegean international conference on design and analysis of manufacturing systems. 2001. Samos Island, Greece
Proceedings of the 4th Aegean international conference on analysis of manufacturing systems. 2003. Samos Island, Greece
Proceedings of the 5th international conference on analysis of manufacturing systems—production management. 2005. Zakynthos Island, Greece
Proceedings of the 5th international conference on analysis of manufacturing systems. 2007. Lunteren, the Netherlands
Roser C, 2003, JSME International Journal Series C—Mechanical Systems Machine Elements and Manufacturing, 46, 73, 10.1299/jsmec.46.73
Sadr J, 2004, Annals of Operations Research, 125, 167, 10.1023/B:ANOR.0000011190.86293.c1
Sevastyanov BA, 1962, Theory of Probability Applications, 6, 429, 10.1137/1107040
10.1080/07408179108963851
Suliman SMA, 1999, International Journal of Production Economics, 63, 69, 10.1016/S0925-5273(99)00006-7
Syrowicz D, 1999, Decomposition analysis of a deterministic, multiple-part-type, multiple-failure-mode production lines. Thesis (SM)
10.1016/S0925-5273(97)00132-1
Tan B, 2001, Mathematical and Computer Modeling, 33, 1011, 10.1016/S0895-7177(00)00296-X
Tan B, 2001, Journal of the Operational Research Society, 51, 1296, 10.1057/palgrave.jors.2601020
10.1080/07408170108936830
Terracol C, 1987, Proceedings of the IEEE international conference on robotics and automation, 1333
10.1080/07408170208928849
10.1111/j.1475-3995.1999.tb00170.x
Viswanadham N, 1992, Performance modeling of automated manufacturing system
Viswanadham N, 1996, IEEE Transactions on Systems, Man, and Cybernetics—Part A: Systems and Humans, 36, 222, 10.1109/3468.485748
Werner L, 2001, Thesis (Masters)
Yang S, 1999, 2nd international conference on analysis and modeling of manufacturing systems
Yang S, 2000, Annals of Operations Research, 93, 405, 10.1023/A:1018944411591
10.1016/S0895-7177(97)00052-6
Yerelan S, 1997, Mathematics and Computer Modeling, 25, 109, 10.1016/S0895-7177(97)00052-6
