Three-dimensional trueness analysis of ceramic crowns fabricated using a chairside computer-aided design/manufacturing system: An in vitro study

Beuer, 2008, Digital dentistry: an overview of recent developments for CAD/CAM generated restorations, Br Dent J, 204, 505, 10.1038/sj.bdj.2008.350 Mehl, 2013, Prosthodontics in digital times: a case report, Quintessence Int, 44, 29 Kim, 2016, Trueness of milled prostheses according to number of ball-end mill burs, J Prosthet Dent, 115, 624, 10.1016/j.prosdent.2015.10.014 Ng, 2014, A comparison of the marginal fit of crowns fabricated with digital and conventional methods, J Prosthet Dent, 112, 555, 10.1016/j.prosdent.2013.12.002 Srinivasan, 2017, CAD/CAM milled removable complete dentures: an in vitro evaluation of trueness, Clin Oral Investig, 21, 2007, 10.1007/s00784-016-1989-7 Renne, 2012, Predicting marginal fit of CAD/CAM crowns based on the presence or absence of common preparation errors, J Prosthet Dent, 108, 310, 10.1016/S0022-3913(12)60183-8 Huang, 2014, Microstructure and mechanical properties of zirconia-toughened lithium disilicate glass–ceramic composites, Mater Chem Phys, 143, 845, 10.1016/j.matchemphys.2013.10.023 Elsaka, 2016, Mechanical properties of zirconia reinforced lithium silicate glass-ceramic, Dent Mater, 32, 908, 10.1016/j.dental.2016.03.013 Sato, 2016, Effects of surface treatments on the bond strength between resin cement and a new zirconia-reinforced lithium silicate ceramic, Oper Dent, 41, 284, 10.2341/14-357-L Kim, 2016, Effect of the crystallization process on the marginal and internal gaps of lithium disilicate CAD/CAM crowns, Biomed Res Int, 2016, 8635483 Lambert, 2017, Dental biomaterials for chairside CAD/CAM: state of the art, J Adv Prosthodont, 9, 486, 10.4047/jap.2017.9.6.486 Steier, 2013, Influence of pressure-assisted polymerization on the microstructure and strength of polymer-infiltrated ceramics, J Mater Sci, 48, 3239, 10.1007/s10853-012-7106-7 Coldea, 2013, Mechanical properties of polymer-infiltrated-ceramic-network materials, Dent Mater, 29, 419, 10.1016/j.dental.2013.01.002 Özarslan, 2016, Effects of different surface finishing procedures on the change in surface roughness and color of a polymer infiltrated ceramic network material, J Adv Prosthodont, 8, 16, 10.4047/jap.2016.8.1.16 Kirsch, 2017, Trueness of four different milling procedures used in dental CAD/CAM systems, Clin Oral Investig, 21, 551, 10.1007/s00784-016-1916-y Bosch, 2014, A 3-dimensional accuracy analysis of chairside CAD/CAM milling processes, J Prosthet Dent, 112, 1425, 10.1016/j.prosdent.2014.05.012 De Paula Silveira, 2017, Marginal and internal fit of CAD-CAM-fabricated composite resin and ceramic crowns scanned by 2 intraoral cameras, J Prosthet Dent, 117, 386, 10.1016/j.prosdent.2016.07.017 Yildirim, 2017, Evaluation of marginal and internal adaptation of hybrid and nanoceramic systems with microcomputed tomography: an in vitro study, J Prosthet Dent, 118, 200, 10.1016/j.prosdent.2016.11.005 Sener-Yamaner, 2017, Effect of material and fabrication technique on marginal fit and fracture resistance of adhesively luted inlays made of CAD/CAM ceramics and hybrid materials, J Adhes Sci Technol, 31, 55, 10.1080/01694243.2016.1204144 DIN ISO 12836:2012. Digitizing devices for CAD/CAM systems for indirect dental restorations – Test methods for assessing accuracy. Digitizing devices for CAD/CAM systems for indirect dental restorations – Test methods for assessing accuracy (ISO 12836:2012). DIN ISO 5725-1:1997-11. Accuracy (trueness and precision) of measurement methods and results-part 1: General principles and definitions (ISO 5725-1:1994). Jin, 2018, Accuracy (trueness and precision) of dental models fabricated using additive manufacturing methods, Int J Comput Dent, 21, 107 Jeon, 2016, Repeatability and reproducibility of individual abutment impression, assessed with a blue light scanner, J Adv Prosthodont, 8, 214, 10.4047/jap.2016.8.3.214 Schaefer, 2012, Marginal and internal fit of pressed lithium disilicate partial crowns in vitro: a three-dimensional analysis of accuracy and reproducibility, Dent Mater, 28, 320, 10.1016/j.dental.2011.12.008 Chavali, 2017, Machinability of CAD-CAM materials, J Prosthet Dent, 118, 194, 10.1016/j.prosdent.2016.09.022 Koizumi, 2015, Surface roughness and gloss of current CAD/CAM resin composites before and after toothbrush abrasion, Dent Mater J, 34, 881, 10.4012/dmj.2015-177 Jeong, 2017, Ceramic molar crown reproducibility by digital workflow manufacturing: an in vitro study, J Adv Prosthodont, 9, 252, 10.4047/jap.2017.9.4.252 Boening, 2000, Clinical fit of procera all ceram crowns, J Prosthet Dent, 84, 419, 10.1067/mpr.2000.109125 Coldea, 2013, In-vitro strength degradation of dental ceramics and novel PICN material by sharp indentation, J Mech Behav Biomed Mater, 26, 34, 10.1016/j.jmbbm.2013.05.004 Tsitrou, 2007, Brittleness index of machinable dental materials and its relation to the marginal chipping factor, J Dent, 35, 897, 10.1016/j.jdent.2007.07.002 Ruse, 2014, Resin-composite blocks for dental CAD/CAM applications, J Dent Res, 93, 1232, 10.1177/0022034514553976 Rezende, 2017, Effect of cement space on stress distribution in Y-TZP based crowns, Dent Mater, 33, 144, 10.1016/j.dental.2016.11.006 Anadioti, 2014, 3D and 2D marginal fit of pressed and CAD/CAM lithium disilicate crowns made from digital and conventional impressions, J Prosthodont, 23, 610, 10.1111/jopr.12180 Association AD, 2019, ANSI/ADA specification No. 8 for zinc phosphate cement, 1970 McLean, 1971, The estimation of cement film thickness by an in vivo technique, Br Dent J, 131, 107, 10.1038/sj.bdj.4802708 Schwartz, 1970, Unserviceable crowns and fixed partial dentures:life-span and cause for loss of serviceability, J Am Dent Assoc, 81, 1395, 10.14219/jada.archive.1970.0398 Mously, 2014, Marginal and internal adaptation of ceramic crown restorations fabricated with CAD/CAM technology and the heat-press technique, J Prosthet Dent, 112, 249, 10.1016/j.prosdent.2014.03.017 Lehmann, 2011, The effect of optical conditioning of preparations with scan spray on preparation form, Acta Stomatol Croat, 45, 86 Kurbad, 2000, The optical conditioning of Cerec preparations with scan spray, Int J Comput Dent, 3, 269