Three-dimensional printing of graphene-based materials and the application in energy storage

Wu, 2017 Güler, 2020, A short review on mechanical properties of graphene reinforced metal matrix composites, J. Mater. Res. Technol., 9, 6808, 10.1016/j.jmrt.2020.01.077 Wu, 2014, Molecular dynamics simulation of graphene sheets joining under ion beam irradiation, Carbon, 66, 31, 10.1016/j.carbon.2013.08.027 Novoselov, 2004, Electric field effect in atomically thin carbon films, Science, 306, 666, 10.1126/science.1102896 Castro, 2009, The electronic properties of graphene, Rev. Mod. Phys., 81 Geim, 2007, The rise of graphene, Nat. Mater., 6, 183, 10.1038/nmat1849 Huang, 2021, Graphene film for thermal management: a review, Nano Mat. Sci., 7, 1 Kumar, 2019, A review of the mechanical and thermal properties of graphene and its hybrid polymer nanocomposites for structural applications, J. Mater. Sci., 54, 5992, 10.1007/s10853-018-03244-3 Wang, 2008, Gate-variable optical transitions in graphene, Science, 320, 206, 10.1126/science.1152793 Wu, 2019, Recent progress in the synthesis of graphene/CNT composites and the energy-related applications, J. Mater. Sci. Technol., 55, 16 Wu, 2018, Graphene and graphene-based nanomaterials for DNA detection: a review, Molecules, 23, 2050, 10.3390/molecules23082050 Chi, 2020, Graphene materials in green energy applications: recent development and future perspective, Renew. Sustain. Energy Rev., 120, 109656, 10.1016/j.rser.2019.109656 Kandasamy, 2019, Recent advances in graphene based nano-composites for automotive and off-highway vehicle applications, Curr. Grap. Sci., 3, 1 Bunch, 2007, Electromechanical resonators from graphene sheets, Science (New York, N.Y.), 315, 490, 10.1126/science.1136836 Bae, 2010, Roll-to-roll production of 30-inch graphene films for transparent electrodes, Nat. Nanotechnol., 5, 574, 10.1038/nnano.2010.132 Stoller, 2008, Graphene-based ultracapacitors, Nano Lett., 8, 3498, 10.1021/nl802558y Li, 2012, Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates, Proc. Natl. Acad. Sci. U. S. A, 109, 17360, 10.1073/pnas.1210072109 Yang, 2015, Preparation of 3D graphene-based architectures and their applications in supercapacitors, Progr. Nat. Sci. Mat. Int., 25, 554, 10.1016/j.pnsc.2015.11.010 Ma, 2014, Three-dimensional graphene networks: synthesis, properties and applications, Natl. Sci. Rev., 2, 40, 10.1093/nsr/nwu072 Cao, 2014, Three-dimensional graphene materials: preparation, structures and application in supercapacitors, Energy Environ. Ence, 7, 1850 Kim, 2016, Lanthanum-catalysed synthesis of microporous 3D graphene-like carbons in a zeolite template, Nature, 535, 131, 10.1038/nature18284 Xu, 2014, Facile fabrication of three-dimensional graphene foam/poly(dimethylsiloxane) composites and their potential application as strain sensor, ACS Appl. Mater. Interfaces, 6, 13455, 10.1021/am502208g Jiang, 2019, Highly compressible and sensitive pressure sensor under large strain based on 3D porous reduced graphene oxide fiber fabrics in wide compression strains, ACS Appl. Mater. Interfaces, 11, 37051, 10.1021/acsami.9b11596 Qiucheng, 2018, Bio-templating growth of nepenthes-like N-doped graphene as bifunctional polysulfide scavenger for LiS batteries, ACS Nano, 12, 10240, 10.1021/acsnano.8b05246 Pruna, 2019, The effect of solvothermal conditions on the properties of three-dimensional N-doped graphene aerogels, Nanomaterials, 9, 350, 10.3390/nano9030350 Hu, 2013, Ultralight and highly compressible graphene aerogels, Adv. Mater., 25, 2219, 10.1002/adma.201204530 Sun, 2011, A one-step strategy for thermal- and pH-responsive graphene oxide interpenetrating polymer hydrogel networks, J. Mater. Chem., 21, 4095, 10.1039/c1jm10276a Cao, 2021, Wearable piezoresistive pressure sensors based on 3D graphene, Chem. Eng. J., 406, 126777, 10.1016/j.cej.2020.126777 2012 Wu, 2019, Perspective of additive manufacturing for metamaterials development, Smart Mater. Struct., 28, 10.1088/1361-665X/ab2eb6 Macdonald, 2017, Comparing microfluidic performance of three-dimensional (3D) printing platforms, Anal. Chem., 89, 3858, 10.1021/acs.analchem.7b00136 Sreehitha, 2017, Impact of 3D printing in automotive industries, Int. J. Mech. Prod. Eng., 5, 91 Wu, 2020, In-plane impact resistance enhancement with a graded cell-wall angle design for auxetic metamaterials, Compos. Struct., 247, 112451, 10.1016/j.compstruct.2020.112451 Yan, 2018, A review of 3D printing technology for medical applications, Engineering, 4, 729, 10.1016/j.eng.2018.07.021 Browne, 2020, 3D printing for electrochemical energy applications, Chem. Rev., 120, 2783, 10.1021/acs.chemrev.9b00783 2011 Singh, 2010, Inkjet printing—process and its applications, Adv. Mater., 22, 673, 10.1002/adma.200901141 Sui, 2020, Review—inkjet printing of metal structures for electrochemical sensor applications: a review, J. Electrochem. Soc., 167, 10.1149/1945-7111/ab721f Zhang, 2017, 3D printing technologies for electrochemical energy storage, Nano Energy, 40, 418, 10.1016/j.nanoen.2017.08.037 Li, 2017, Recent developments in graphene conductive ink: preparation, printing technology and application, Chin. Sci. Bull., 62, 3217, 10.1360/N972017-00288 Fan, 2008, Deoxygenation of exfoliated graphite oxide under alkaline conditions: a green route to graphene preparation, Adv. Mater., 20, 4490, 10.1002/adma.200801306 Garcia-Argumanez, 2019, Electrochemical reduction of Graphene Oxide on biomedical grade CoCr alloy, Appl. Surf. Sci., 465, 1028, 10.1016/j.apsusc.2018.09.188 Akhavan, 2009, Photocatalytic reduction of graphene oxide nanosheets on TiO2 thin film for photoinactivation of bacteria in solar light irradiation, J. Phys. Chem. C, 113, 20214, 10.1021/jp906325q Le, 2011, Graphene supercapacitor electrodes fabricated by inkjet printing and thermal reduction of graphene oxide, Electrochem. Commun., 13, 355, 10.1016/j.elecom.2011.01.023 Mei, 2011, Ultrasonication-assisted ultrafast reduction of graphene oxide by zinc powder at room temperature, Carbon, 49, 5389, 10.1016/j.carbon.2011.08.019 Li, 2020, Mechanisms of liquid phase exfoliation for the production of graphene, ACS Nano, 14, 10976, 10.1021/acsnano.0c03916 Li, 2017, Scalable fabrication and integration of graphene microsupercapacitors through full inkjet printing, ACS Nano, 11, 8249, 10.1021/acsnano.7b03354 Manna, 2019, Printed strain sensors using graphene nanosheets prepared by water-assisted liquid phase exfoliation, Adv. Mater. Interf., 6, 1900034, 10.1002/admi.201900034 Khaled, 2013, Electrochemically exfoliated graphene as solution-processable, highly conductive electrodes for organic electronics, ACS Nano, 7, 3598, 10.1021/nn400576v Wang, 2019, Ink-based 3D printing technologies for graphene-based materials: a review, Adv. Comp. Hybrid Mat., 2, 1, 10.1007/s42114-018-0067-9 Min, 2011, Submillimeter-scale graphene patterning through ink-jet printing of graphene oxide ink, Chem. Lett., 40, 54, 10.1246/cl.2011.54 Torrisi, 2012, Inkjet-printed graphene electronics, ACS Nano, 6, 2992, 10.1021/nn2044609 Yang, 2016, Parameter study on 3D-printing graphene oxidize based on directional freezing, J. Manuf. Sci. Eng., 139 Xu, 2014, Inkjet-printed energy storage device using graphene/polyaniline inks, J. Power Sources, 248, 483, 10.1016/j.jpowsour.2013.09.096 Jabari, 2016, Aerosol-Jet printing of highly flexible and conductive graphene/silver patterns, Mater. Lett., 174, 40, 10.1016/j.matlet.2016.03.082 Chi, 2014, Freestanding graphene paper supported three-dimensional porous graphene–polyaniline nanocomposite synthesized by inkjet printing and in flexible all-solid-state supercapacitor, ACS Appl. Mater. Interfaces, 6, 16312, 10.1021/am504539k Karim, 2019, All inkjet-printed graphene-silver composite ink on textiles for highly conductive wearable electronics applications, Sci. Rep., 9, 8035, 10.1038/s41598-019-44420-y Li, 2013, Efficient inkjet printing of graphene, Adv. Mater., 25, 3985, 10.1002/adma.201300361 Lewis, 2006, Direct ink writing of 3D functional materials, Adv. Funct. Mater., 16, 2193, 10.1002/adfm.200600434 Wan, 2020, Direct ink writing based 4D printing of materials and their applications, Adv. Sci., 7, 2001000, 10.1002/advs.202001000 Wei, 2017, 3D direct writing fabrication of electrodes for electrochemical storage devices, J. Power Sources, 354, 134, 10.1016/j.jpowsour.2017.04.042 Vaezi, 2013, A review on 3D micro-additive manufacturing technologies, Int. J. Adv. Manuf. Technol., 67, 1721, 10.1007/s00170-012-4605-2 Xiao, 2018, Three-dimensional graphene-based materials by direct ink writing method for lightweight application, Int. J. Lightwght Mat. Manuf., 1, 96 Huang, 2011, Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors, Nano Res., 4, 675, 10.1007/s12274-011-0123-z Zishen, 2018, Three-dimensional printing of polyaniline/reduced graphene oxide composite for high-performance planar supercapacitor, ACS Appl. Mater. Interfaces, 10, 10437, 10.1021/acsami.7b19635 Yun, 2019, Direct 3D printing of a graphene oxide hydrogel for fabrication of a high areal specific capacitance microsupercapacitor, RSC Adv., 9, 29384, 10.1039/C9RA04882K Naficy S, 2014, Graphene oxide dispersions: tuning rheology to enable fabrication %, J. Mater. Horiz., 1, 326, 10.1039/C3MH00144J Farahani, 2016, Three-dimensional printing of multifunctional nanocomposites: manufacturing techniques and applications, Adv. Mater., 28, 5794, 10.1002/adma.201506215 García-Tuon, 2015, Printing in three dimensions with graphene, Adv. Mater., 27, 1688, 10.1002/adma.201405046 Guo, 2019, Recent advances on 3D printing graphene-based composites, Nano Mater. Sci., 1, 101, 10.1016/j.nanoms.2019.03.003 Jiang, 2019, Direct ink writing of wearable thermoresponsive supercapacitors with rGO/CNT composite electrodes, Adv. Mat. Technol., 4, 1900691, 10.1002/admt.201900691 Wang, 2020, Direct graphene-carbon nanotube composite ink writing all-solid-state flexible microsupercapacitors with high areal energy density, Adv. Funct. Mater., 30, 1907284, 10.1002/adfm.201907284 Zhu, 2015, Highly compressible 3D periodic graphene aerogel microlattices, Nat. Commun., 6, 6962, 10.1038/ncomms7962 Jiang, 2018, Direct 3D printing of ultralight graphene oxide aerogel microlattices, Adv. Funct. Mater., 28, 1707024, 10.1002/adfm.201707024 Wang, 2020, Liquid crystalline 3D printing for superstrong graphene microlattices with high density, Carbon, 159, 166, 10.1016/j.carbon.2019.12.039 García-Tu?Ón, 2017, Graphene oxide: an all-in-one processing additive for 3D printing, ACS Appl. Mater. Interfaces, 9, 32977, 10.1021/acsami.7b07717 Zhu, 2016, Supercapacitors based on three-dimensional hierarchical graphene aerogels with periodic macropores, Nano Lett., 16, 3448, 10.1021/acs.nanolett.5b04965 Sang, 2018, Graphene inks for printed flexible electronics: graphene dispersions, ink formulations, printing techniques and applications, Adv. Colloid Interface Sci., 261, 41, 10.1016/j.cis.2018.09.003 Liu, 2018, Development of graphene oxide/polyaniline inks for high performance flexible microsupercapacitors via extrusion printing, Adv. Funct. Mater., 28, 1706592.1 Loh, 2019, Direct ink writing of graphene-based solutions for gas sensing, Acs Appl. Nano Mat., 2, 4104, 10.1021/acsanm.9b00572 Penumakala, 2020, A critical review on the fused deposition modeling of thermoplastic polymer composites, Compos. Part B Eng., 201, 108336, 10.1016/j.compositesb.2020.108336 Ning, 2015, Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling, Compos. Part B Eng., 80, 369, 10.1016/j.compositesb.2015.06.013 Wei, 2015, 3D printable graphene composite, Sci. Rep., 5, 11181, 10.1038/srep11181 Foo, 2018, Three-dimensional printed electrode and its novel applications in electronic devices, Sci. Rep., 8, 7399, 10.1038/s41598-018-25861-3 Prashantha, 2017, Multifunctional properties of 3D printed poly(lactic acid)/graphene nanocomposites by fused deposition modeling, J. Macromol. Sci., 54, 24, 10.1080/10601325.2017.1250311 Pegoretti, 2016, Fused deposition modelling with ABS-graphene nanocomposites, Compos. Part A Appl. Sci. Manuf., 85, 181, 10.1016/j.compositesa.2016.03.013 Huang, 2012, Graphene-based composites, Chem. Soc. Rev., 41, 666, 10.1039/C1CS15078B Ren, 2018, Simultaneous enhancement on thermal and mechanical properties of polypropylene composites filled with graphite platelets and graphene sheets, Compos. Part A Appl. Sci. Manuf., 112, 57, 10.1016/j.compositesa.2018.05.017 Nguyen, 2018, Recent advances on 3D printing technique for thermal-related applications, Adv. Eng. Mater., 20, 1700876, 10.1002/adem.201700876 Yu, 2017, Incorporation of graphitic nano-filler and poly(lactic acid) in fused deposition modeling, J. Appl. Polym. Sci., 134, 44703, 10.1002/app.44703 Kim, 2020, Characterization of electrical heating of graphene/PLA honeycomb structure composite manufactured by CFDM 3D printer, Fashion, 7, 8 Chen, 2017, 3D printing biocompatible polyurethane/poly(lactic acid)/graphene oxide nanocomposites: anisotropic properties, ACS Appl. Mater. Interfaces, 9, 4015, 10.1021/acsami.6b11793 Jia, 2017, High through-plane thermal conductivity of polymer based product with vertical alignment of graphite flakes achieved via 3D printing, Compos. Sci. Technol., 145, 55, 10.1016/j.compscitech.2017.03.035 Zhu, 2017, Thermal and mechanical properties of polyamide 12/graphene nanoplatelets nanocomposites and parts fabricated by fused deposition modeling, J. Appl. Polym. Sci., 134, 45332, 10.1002/app.45332 2012 A, 2010, A review on stereolithography and its applications in biomedical engineering, Biomaterials, 31, 6121, 10.1016/j.biomaterials.2010.04.050 Wang, 2018, 3D printing of graphene-doped target for "matrix-free" laser desorption/ionization mass spectrometry, Chem. Commun., 54, 2723, 10.1039/C7CC09649F Lim, 2017, Characterization of products using additive manufacturing with graphene/photopolymer-resin nano-fluid, J. Nanosci. Nanotechnol., 17, 5492, 10.1166/jnn.2017.14159 Feng, 2019, Graphene-reinforced biodegradable resin composites for stereolithographic 3D printing of bone structure scaffolds, J. Nanomater., 2019, 1, 10.1155/2019/9710264 Lin, 2015, 3D stereolithography printing of graphene oxide reinforced complex architectures, Nanotechnology, 26, 434003, 10.1088/0957-4484/26/43/434003 Chiappone, 2017, Study of graphene oxide-based 3D printable composites: effect of the in situ reduction, Compos. Part B Eng., 124, 9, 10.1016/j.compositesb.2017.05.049 Tsang, 2019, GO-modified flexible polymer nanocomposites fabricated via 3D stereolithography, Front. Chem. Sci. Eng., 13, 736, 10.1007/s11705-019-1836-x Manapat, 2017, High-strength stereolithographic 3D printed nanocomposites: graphene oxide metastability, ACS Appl. Mater. Interfaces, 9, 10085, 10.1021/acsami.6b16174 Taormina, 2018, 3D printing processes for photocurable polymeric materials: technologies, materials, and future trends, J. Appl. Biomater. Funct. Mater., 16, 151 Hensleigh, 2018, Additive manufacturing of complex micro-architected graphene aerogels, Mat. Horizons, 5, 1025 Korhonen, 2016, Fabrication of graphene-based 3D structures by stereolithography, Phys. Status Solidi (a), 213, 982, 10.1002/pssa.201532761 Zhou, 2017, 3D bioprinted graphene oxide-incorporated matrix for promoting chondrogenic differentiation of human bone marrow mesenchymal stem cells, Carbon, 116, 615, 10.1016/j.carbon.2017.02.049 ZhuC, 2016, 3D graphene-based hybrid materials: synthesis and applications in energy storage and conversion, Nanosc. Camb., 8, 15414, 10.1039/C6NR04770J Ma, 2020, Synthesis of three-dimensional graphene-based materials for applications in energy storage, JOM, 72, 2445, 10.1007/s11837-020-04074-y Fu, 2017, Progress in 3D printing of carbon materials for energy-related applications, Adv. Mater., 29, 1603486, 10.1002/adma.201603486 Waseem, 2018, Recent advancements in supercapacitor technology, Nano Energy, 52, 441, 10.1016/j.nanoen.2018.08.013 Nathan-Walleser, 2014, 3D micro-extrusion of graphene-based active electrodes: towards high-rate AC line filtering performance electrochemical capacitors, Adv. Funct. Mater., 24, 10.1002/adfm.201304151 Sun, 2015, Layer-by-layer printing of laminated graphene-based interdigitated microelectrodes for flexible planar micro-supercapacitors, Electrochem. Commun., 51, 33, 10.1016/j.elecom.2014.11.023 Qi, 2018, 3D-Printed, superelastic polypyrrole–graphene electrodes with ultrahigh areal capacitance for electrochemical energy storage, Adv. Mat. Technol., 1800053, 10.1002/admt.201800053 Yao, 2016, 3D-Printed structure boosts the kinetics and intrinsic capacitance of pseudocapacitive graphene aerogels, Adv. Mater., 535, 131 Azhari, 2017, Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes, Carbon, 119, 257, 10.1016/j.carbon.2017.04.028 Hondred, 2019, Enhanced electrochemical biosensor and supercapacitor with 3D porous architectured graphene via salt impregnated inkjet maskless lithography, Nanosc. Horizons, 4, 735, 10.1039/C8NH00377G Foster, 2017, 3D printed graphene based energy storage devices, Sci. Rep., 7, 42233, 10.1038/srep42233 Li, 2019, Additive manufacturing high performance graphene-based composites: a review, Compos. Part A Appl. Sci. Manuf., 124, 105483, 10.1016/j.compositesa.2019.105483 Jiang, 2019, Screen-printable films of graphene/CoS2/Ni3S4 composites for flexible and arbitrary-shaped all-solid-state hybrid supercapacitor device, Carbon, 146, 557, 10.1016/j.carbon.2019.02.045 Shi, 2019, Ultrahigh-voltage integrated micro-supercapacitors with designable shapes and superior flexibility, Energy Environ. Sci., 12, 1534, 10.1039/C8EE02924E Quanhong, 2018, Water-soluble hybrid graphene ink for gravure-printed planar supercapacitors, Adv. Electr. Mat., 4, 1800059, 10.1002/aelm.201800059 Li, 2019, High-performance supercapacitor carbon electrode fabricated by large-scale roll-to-roll micro-gravure printing, J. Phys. D Appl. Phys., 52, 5501, 10.1088/1361-6463/aafbf3 Li, 2019, Inkjet printed pseudocapacitive electrodes on laser-induced graphene for electrochemical energy storage, Mater. Today Energy, 12, 155, 10.1016/j.mtener.2019.01.005 Sundriyal, 2017, Inkjet-printed electrodes on A4 paper substrates for low-cost, disposable, and flexible asymmetric supercapacitors, ACS Appl. Mater. Interfaces, 9, 38507, 10.1021/acsami.7b11262 Diao, 2018, Flexible supercapacitor Based on inkjetprinted graphene@polyaniline nanocomposites with ultrahigh capacitance, Macromol. Mater. Eng., 303, 1800092, 10.1002/mame.201800092 Gao, 2018, 3D printing of tunable energy storage devices with both high areal and volumetric energy densities, Adv. Energy Mater., 9, 1802578, 10.1002/aenm.201802578 Tang, 2018, Architectured leaf-inspired Ni0.33Co0.66S2/graphene aerogels via 3D printing for high-performance energy storage, Adv. Funct. Mater., 28, 1805057, 10.1002/adfm.201805057 Tang, 2018, Generalized 3D printing of graphene-based mixed-dimensional hybrid aerogels, ACS Nano, 12, 3502, 10.1021/acsnano.8b00304 Mensing, 2020, 2D and 3D printing for graphene based supercapacitors and batteries: a review, Sustain. Mat. Technol., 25 Guo, 2021, 3D printing of reduced graphene oxide aerogels for energy storage devices: a paradigm from materials and technologies to applications, Energy Stor. Mat., 39, 146 Li, 2019, Direct inkjet printing of aqueous inks to flexible all-solid-state graphene hybrid micro-supercapacitors, ACS Appl. Mater. Interfaces, 11, 46044, 10.1021/acsami.9b12225 Yao, 2020, 3D-printed structure boosts the kinetics and intrinsic capacitance of pseudocapacitive graphene aerogels, Adv. Mater., 32, 1906652, 10.1002/adma.201906652 Zhu, 2017, 3D printed functional nanomaterials for electrochemical energy storage, Nano Today, 15, 107, 10.1016/j.nantod.2017.06.007 Sun, 2013, 3D printing of interdigitated Li-ion microbattery architectures, Adv. Mater. (Deerfield Beach, Fla.), 25, 4539, 10.1002/adma.201301036 Fu, 2016, Graphene oxide-based electrode inks for 3D-printed lithium-ion batteries, Adv. Mater., 28, 2587, 10.1002/adma.201505391 Sun, 2020, 3D printing nanocomposite gel-based thick electrode enabling both high areal capacity and rate performance for lithium-ion battery, Chem. Eng. J., 381, 122641, 10.1016/j.cej.2019.122641 Shen, 2018, 3D printing sulfur copolymer-graphene architectures for Li-S batteries, Adv. Energy Mater., 8, 1701527.1, 10.1002/aenm.201701527 Chen, 2020, 3D printed high-loading lithium-sulfur battery toward wearable energy storage, Adv. Funct. Mater., 30, 1909469, 10.1002/adfm.201909469 Gao, 2019, Toward a remarkable Li-S battery via 3D printing, Nano Energy, 56, 595, 10.1016/j.nanoen.2018.12.001 Zhang, 2018, Extending cycling life of lithium–oxygen batteries based on novel catalytic nanofiber membrane and controllable screen-printed method, J. Mater. Chem. A, 6, 21458, 10.1039/C8TA07884J Zhang, 2018, Extending cycling life of lithium-oxygen batteries based on novel catalytic nanofiber membrane and controllable screen-printed method, J. Mater. Chem. A, 6, 21458, 10.1039/C8TA07884J Lacey, 2018, Extrusion-based 3D printing of hierarchically porous advanced battery electrodes, Adv. Mater., 30, 1705651, 10.1002/adma.201705651 Qiao, 2018, 3D-Printed graphene oxide framework with thermal shock synthesized nanoparticles for Li-CO2 batteries, Adv. Funct. Mater., 28, 1805899.1, 10.1002/adfm.201805899 Lin, 2020, 3D printing of free-standing “O2 breathable” air electrodes for high-capacity and long-life Na-O2 batteries, Chem. Mater., 32, 3018, 10.1021/acs.chemmater.9b05360 Brown, 2019, 3D printing of hybrid MoS2-graphene aerogels as highly porous electrode materials for sodium ion battery anodes, Mater. Des., 170, 107689, 10.1016/j.matdes.2019.107689 Ding, 2017, 3D-Printed hierarchical porous frameworks for sodium storage, ACS Appl. Mater. Interfaces, 9, 41871, 10.1021/acsami.7b12892 Zeng, 2020, Recent progresses of 3D printing technologies for structural energy storage devices, Mat. Today Nano, 12, 100094, 10.1016/j.mtnano.2020.100094 Li, 2021, Lithium/sodium-ion capacitors based on 3D graphene-based materials, J. Energy Stor., 40, 102822, 10.1016/j.est.2021.102822 Bai, 2018, A scalable approach to dendrite-free lithium anodes via spontaneous reduction of spray-coated graphene oxide layers, Adv. Mater., 30, 1801213, 10.1002/adma.201801213 Zhang, 2020, 3D-printed functional electrodes towards Zn-Air batteries, Mater. Today Energy, 16, 100407, 10.1016/j.mtener.2020.100407 A, 2019, Effect of thermally decomposable spacers on graphene microsphere structure and restacking of graphene sheets during electrode fabrication, Carbon, 150, 128, 10.1016/j.carbon.2019.05.014 Ciochoń, 2020, Reversible graphitization of SiC: a route towards high-quality graphene on a minimally step bunched substrate, Appl. Surf. Sci., 528, 146917, 10.1016/j.apsusc.2020.146917 Wu, 2017, Joining of graphene flakes by low energy N ion beam irradiation, Appl. Phys. Lett., 110, 133102, 10.1063/1.4979166 Mensing, 2020, 2D and 3D printing for graphene based supercapacitors and batteries: a review, Sustain. Mater. Technol., 25 Wang, 2019, Functional inks for printable energy storage applications based on 2D materials, ChemSusChem, 13, 1330, 10.1002/cssc.201902019 Wang, 2020, Significantly enhanced ultrathin NiCo-based MOF nanosheet electrodes hybrided with Ti3C2Tx MXene for high performance asymmetric supercapacitors, Eng. Sci., 9, 50 He, 2019, Screen printing of a highly conductive graphene ink for flexible printed electronics, ACS Appl. Mater. Interfaces, 11, 32225, 10.1021/acsami.9b04589 Hassan, 2015, A feasibility study of roll to roll printing on graphene, Appl. Mech. Mater., 799–800, 402, 10.4028/www.scientific.net/AMM.799-800.402