Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels

10.3171/2014.2.FOCUS13561

FDA 510(k) summary statement for Osteofab Patient Specific Cranial Device. Report Number K121818 Center for Devices and Radiological Health (2013) http://www.accessdata.fda.gov/cdrh_docs/pdf12/K121818.pdf (viewed 10/11/15).

10.1056/NEJMc1206319

S. K. Bhatia S. Sharma 3D-printed prosthetics roll off the presses. Chem. Eng. Prog. 110 28–33 (2014) www.aiche.org/sites/default/files/cep/20140528.pdf (viewed 10/12/15).

10.1126/science.aaa2397

10.1038/nbt.3056

10.1126/scitranslmed.3009696

10.1126/science.1226340

10.1038/nbt.2958

10.1126/scitranslmed.3008558

10.1038/nbt.2983

10.1021/nl4007744

10.1088/1758-5082/4/3/035005

10.1002/jbm.a.34420

10.1016/j.biomaterials.2009.07.056

T. Xua, C. A. Gregorya, P. Molnara, X. Cuia, S. Jalotab, S. B. Bhadurib, T. Bolanda, Viability and electrophysiology of neural cell structures generated by the inkjet printing method. Biomaterials 27, 3580–3588 (2006).

10.1002/adma.201305506

10.1038/ncomms4935

10.1038/nmat3357

10.1088/1758-5082/4/2/022001

10.1088/1758-5082/2/2/022001

10.1016/j.biomaterials.2009.06.034

A. Lantada in Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices A. D. Lantada Ed. (Springer US New York 2013) pp. 261–275.

10.1016/j.progpolymsci.2011.11.007

10.1016/j.tibtech.2012.10.005

10.1109/TBME.2013.2243912

10.1002/adma.201004625

10.1016/j.addr.2006.03.001

10.1016/j.jconrel.2005.09.023

10.1084/jem.147.6.1584

10.1016/S0268-005X(96)80047-6

10.1074/jbc.271.22.13008

10.1016/j.biomaterials.2003.10.002

10.1108/13552540310489631

10.1371/journal.pone.0108252

10.1093/nar/gkn613

10.1038/nmeth.2089

10.1016/j.actbio.2013.04.036

10.1002/jmor.1050880104

10.1242/jcs.067579

10.1371/journal.pone.0051499