Three-Dimensional Printing and Medical Imaging: A Review of the Methods and Applications

Koff W, Gustafson P. 3D Printing and the Future of Manufacturing. CSC Lead Edge Forum [Internet] 2012; Available from: 〈http://assets1.csc.com/innovation/downloads/LEF_20123DPrinting.pdf〉. Hull CW. Apparatus for Production of Threedimensional Objects By Stereolithography 1986. Alto, 2014, 3D printing market to grow to US$16.2 billion in 2018, Met Powder Rep, 69, 42, 10.1016/S0026-0657(14)70138-9 Malone, 2007, Fab@Home: the personal desktop fabricator kit, Rapid Prototyp J, 13, 245, 10.1108/13552540710776197 Berman, 2012, 3-D printing: The new industrial revolution, Bus Horiz, 55, 155, 10.1016/j.bushor.2011.11.003 Costello, 2015, Incorporating three-dimensional printing into a simulation-based congenital heart disease and critical care training curriculum for resident physicians, Congenit Heart Dis, 185, 10.1111/chd.12238 Gibson, 2006, The use of rapid prototyping to assist medical applications, Rapid Prototyp J, 12, 53, 10.1108/13552540610637273 Farooqi, 2015, Echocardiography and three-dimensional printing: sound ideas to touch a heart, J Am Soc Echocardiogr, 28, 398, 10.1016/j.echo.2015.02.005 Rengier, 2010, 3D printing based on imaging data: Review of medical applications, Int J Comput Assist Radiol Surg, 5, 335, 10.1007/s11548-010-0476-x Bibb, 2010, A review of the issues surrounding three-dimensional computed tomography for medical modelling using rapid prototyping techniques, Radiography, 16, 78, 10.1016/j.radi.2009.10.005 Olszewski, 2013, Three-dimensional rapid prototyping models in cranio-maxillofacial surgery: systematic review and new clinical applications, Proc Belg R Acad Med, 43 Rosset, 2004, OsiriX: An open-source software for navigating in multidimensional DICOM images, J Digit Imaging, 17, 205, 10.1007/s10278-004-1014-6 Cignoni, 2008, MeshLab: an open-source mesh processing tool, Eurographics Italian Chapter Conference, 129 Ebert, 2011, Getting in touch-3D printing in Forensic Imaging, Forensic Sci Int, 211, 1, 10.1016/j.forsciint.2011.04.022 Tam, 2012, 3-D printout of a DICOM file to aid surgical planning in a 6 year old patient with a large scapular osteochondroma complicating congenital diaphyseal aclasia, J Radiol Case Rep, 6, 31 Huotilainen, 2014, Inaccuracies in additive manufactured medical skull models caused by the DICOM to STL conversion process, J Craniomaxillofac Surg, 42, 259, 10.1016/j.jcms.2013.10.001 Levy, 1994, Preliminary experience with selective laser sintering models of the human temporal bone, Am J Neuroradiol, 15, 473 Boland, 2006, Application of inkjet printing to tissue engineering, Biotechnol J, 1, 910, 10.1002/biot.200600081 Nicklaus Children’s Hospital Acquires 3D Printer to Support Pediatric Surgical Planning and Research - Miami Children’s Hospital; 2015. Available from: 〈http://www.mch.com/press/EN/484/Nicklaus-Children-s-Hospital-Acquires-3D-Printer-to-Support-Pediatric-Surgical-Planning-and-Research.aspx〉. 12 Hospitals in the UK Are Using Stratasys 3D Printers for the Creation of Surgical Models Prior to Surgery - 3DPrint.com 2015. Available from: 〈http://3dprint.com/13033/stratasys-3d-printers-surgery/〉. Waran, 2014, Injecting realism in surgical training - Initial simulation experience with custom 3D models, J Surg Educ, 71, 193, 10.1016/j.jsurg.2013.08.010 Radecka, 2006, Magnusson a. Pelvicaliceal biomodeling as an aid to achieving optimal access in percutaneous nephrolithotripsy, J Endourol, 20, 92, 10.1089/end.2006.20.92 Murphy, 2014, 3D bioprinting of tissues and organs, Nat Biotechnol, 32, 773, 10.1038/nbt.2958 Singare, 2005, Customized design and manufacturing of chin implant based on rapid prototyping, Rapid Prototyp J, 11, 113, 10.1108/13552540510589485 Cohen, 2009, Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology, Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 108, 661, 10.1016/j.tripleo.2009.05.023 Liu, 2014, Liu SS-Y. Technical procedures for template-guided surgery for mandibular reconstruction based on digital design and manufacturing, Biomed Eng Online, 13, 63, 10.1186/1475-925X-13-63 Chung, 2014, Preshaping plates for minimally invasive fixation of calcaneal fractures using a real-size 3D-printed model as a preoperative and intraoperative tool, Foot Ankle Int, 35, 1231, 10.1177/1071100714544522 Singare, 2006, Fabrication of customised maxillo-facial prosthesis using computer-aided design and rapid prototyping techniques, Rapid Prototyping J, 12, 206, 10.1108/13552540610682714 Singare, 2004, Design and fabrication of custom mandible titanium tray based on rapid prototyping, Med Eng Phys, 26, 671, 10.1016/j.medengphy.2004.06.001 Parthasarathy, 2014, 3D modeling, custom implants and its future perspectives in craniofacial surgery, Ann Maxillofac Surg, 4, 9, 10.4103/2231-0746.133065 Transplant jaw made by 3D printer claimed as first - BBC News 2015; Available from: 〈http://www.bbc.com/news/technology-16907104〉. Vanhoenacker, 2001, Hereditary multiple exostoses: from genetics to clinical syndrome and complications, Eur J Radiol, 40, 208, 10.1016/S0720-048X(01)00401-6 Mahaisavariya, 2006, Rapid prototyping model for surgical planning of corrective osteotomy for cubitus varus: Report of two cases, Inj Extra, 37, 176, 10.1016/j.injury.2005.10.026 Imanishi, 2015, Three-dimensional printed calcaneal prosthesis following total calcanectomy, Int J Surg Case Rep, 10, 83, 10.1016/j.ijscr.2015.02.037 Choong, 1999, Osteosarcoma of the foot: a review of 52 patients at the Mayo Clinic, Acta Orthop Scand, 70, 361, 10.3109/17453679908997825 Schmauss, 2014, Three-dimensional printing in cardiac surgery and interventional cardiology: a single-centre experience, Eur J Cardio-Thoracic Surg, 1 Tam MDBS, 2013, 3D printing of an aortic aneurysm to facilitate decision making and device selection for endovascular aneurysm repair in complex neck anatomy, J Endovasc Ther, 20, 863, 10.1583/13-4450MR.1 Noecker, 2006, Development of patient-specific three-dimensional pediatric cardiac models, American Soc Artif Intern Organs J, 52, 349, 10.1097/01.mat.0000217962.98619.ab Sodian, 2008, Pediatric cardiac transplantation: Three-dimensional printing of anatomic models for surgical planning of heart transplantation in patients with univentricular heart, J Thorac Cardiovasc Surg, 136, 1098, 10.1016/j.jtcvs.2008.03.055 Brewster, 2003, Guidelines for the treatment of abdominal aortic aneurysms. Report of a subcommittee of the Joint Council of the American Association for Vascular Surgery and Society for Vascular Surgery, J Vasc Surg, 37, 1106, 10.1067/mva.2003.363 Schanzer, 2011, Predictors of abdominal aortic aneurysm sac enlargement after endovascular repair, Circulation, 123, 2848, 10.1161/CIRCULATIONAHA.110.014902 Zein, 2013, Three-dimensional print of a liver for preoperative planning in living donor liver transplantation, Liver Transpl, 19, 1304, 10.1002/lt.23729 Vincent, 2011, Pancreatic cancer, Lancet, 378, 607, 10.1016/S0140-6736(10)62307-0 Gillen, 2010, Preoperative/neoadjuvant therapy in pancreatic cancer: a systematic review and meta-analysis of response and resection percentages, PLoS Med, 7, e1000267, 10.1371/journal.pmed.1000267 Schwaiger, 2012, Manufacturing of patient-specific pancreas models for surgical resections, 2012 IEEE Int Conf Robot Biomimetics, ROBIO 2012 - Conf Dig, 991 Tiselius, 2001, Guidelines on urolithiasis, Eur Urol, 40, 362, 10.1159/000049803 Zhang, 2015, Evaluation of three-dimensional printing for laparoscopic partial nephrectomy of renal tumors: a preliminary report, World J Urol, 1 De Coppi, 2007, Isolation of amniotic stem cell lines with potential for therapy, Nat Biotechnol, 25, 100, 10.1038/nbt1274 Skardala, 2009, Amniotic fluid-derived stem cells accelerate healing of large skin wounds, Stem Cells Transl Med, 27, 417 Cui, 2012, Direct human cartilage repair using three-dimensional bioprinting technology, Tissue Eng Part A, 18, 1304, 10.1089/ten.tea.2011.0543 Zopf, 2013, Bioresorbable airway splint created with a three-dimensional printer, N Engl J Med, 368, 2043, 10.1056/NEJMc1206319 Practice, 2015, The shape of things to come 3D printing in medicine, 312, 2213 Waran, 2015, Neurosurgical endoscopic training via a realistic 3-dimensional model with pathology, Simul Healthc J Soc Simul Healthc, 10, 43, 10.1097/SIH.0000000000000060 Hayashi, 2008, Preparation of a simple and efficient laboratory model for training in neuroendoscopic procedures, Childs Nerv Syst, 24, 749, 10.1007/s00381-007-0553-9 Additive manufacturing: facts and forecasts - industry & automation - pictures of the future - innovation - home - Siemens Global Website 2015; Available from: 〈http://www.siemens.com/innovation/en/home/pictures-of-the-future/industry-and-automation/Additive-manufacturing-facts-and-forecasts.html〉. Lambrecht, 2009, Generation of three-dimensional prototype models based on cone beam computed tomography, Int J Comput Assist Radiol Surg, 4, 175, 10.1007/s11548-008-0275-9 3D Printing in Medical and Dental Markets: An Opportunity Analysis and Ten-Year Forecast, Smartech; 2015. Available from: 〈http://smartechpublishing.com/reports/3d-printing-in-medical-and-dental-markets-an-opportunity-analysis-and-ten-y〉. Watson, 2014, A low-cost surgical application of additive fabrication, J Surg Educ, 71, 14, 10.1016/j.jsurg.2013.10.012 MSD “bio-inks” deal to use 3D printed liver in toxicology studies; 2015. Available from: 〈http://www.outsourcing-pharma.com/Preclinical-Research/MSD-bio-inks-deal-to-use-3D-printed-liver-in-toxicology-studies〉.