Thin-walled timber structures: An investigation

Hancock, 2007

Yan, 2010, Greenhouse gas emissions in building construction: a case study of One Peking in Hong Kong, Build Environ, 45, 949, 10.1016/j.buildenv.2009.09.014

Aicher S, Stritzke C. Novel lightweight timber composite element – web design in shear and compression. In: Aicher, S., Reinhardt, H-W, Garrecht H., editors. Proceedings of the RILEM conference “materials and joints in timber structures - recent advancement of technology”. Stuttgart, Germany; 2013. p. 135–48.

Schafer, 2010, Computational modeling of cold-formed steel, Thin-Walled Struct, 48, 752, 10.1016/j.tws.2010.04.008

Schafer, 1998, Computational modeling of cold-formed steel: characterizing geometric imperfections and residual stresses, J Constr Steel Res, 47, 193, 10.1016/S0143-974X(98)00007-8

Brancheriau, 2002, Natural vibration analysis of clear wooden beams: a theoretical review, Wood Sci Technol, 36, 347, 10.1007/s00226-002-0143-7

CIRAD. BING® (Beam Identification by Nondestructive Grading) software. <http://ur-bois-tropicaux.cirad.fr/produits/bing/usage> [accessed 23.04.13].

AS/NZS 4357.2. Structural laminated veneer lumber, Part 2: determination of structural properties – test methods, standards Australia. Sydney, Australia; 2006.

Galambos, 1998

Kingston RST. The mechanical properties of Queensland grown hoop pine, Proj.TM.9-7, Final report, Commonwealth of Australia – Council for scientific and industrial research – division of forest products. South Melbourne, Australia; 1947.

BlueScope Steel Limited. LYSAGHT® Zed & Cee Purlins and Girts, <http://www.lysaght.com/go/product/lysaght-zed-and-cee-purlins-and-girts> [accessed 23.04.13].

AS/NZS 4600. Cold-formed steel structures, standards Australia. Sydney, Australia; 2005.

Yap, 2008, Experimental study of complex high-strength cold-formed cross-shaped steel section, ASCE J Struct Eng, 134, 1322, 10.1061/(ASCE)0733-9445(2008)134:8(1322)

Strand7, Using Strand7 – User manual – Release 2.4.4, (G+D Computing Pty Ltd). Sydney, Australia; 2010.

F.P. Laboratory, Wood handbook, Wood as an engineering material – Centennial Edition. Madison, Wisconsin (USA): United States Department of Agriculture; 2010.

Lau HH, Beale RG, Godley MHR. The influence of column base connectivity on the stability of columns and frames. In: Beale RG, editor. Proceedings of the 6th international conference on steel and aluminium structures. Oxford (UK); 2007. p. 425–32.

Lau HH, Godley MHR, Beale RG. The effect of column base connectivity on the carrying capacity of slender columns. In: Proceedings of the 9th international conference on steel and space structures. Singapore; 1999. p. 397–405.

Gilbert, 2011, Determination of the base plate stiffness and strength of steel storage racks, J Constr Steel Res, 67, 1031, 10.1016/j.jcsr.2011.01.006

Schafer BW. Designing cold-formed steel using the direct strength method. In: LaBoule RA, Yu WW, editors. Proceedings of the 18th international specialty conference on cold-formed steel structures. Orlando, Florida; 2006. p. 475–90.