Thermomechanical response of DH-36 structural steel over a wide range of strain rates and temperatures

Beukel, 1982, The strain dependence of static and dynamic strain-aging, Acta Metall., 30, 1027, 10.1016/0001-6160(82)90211-5

Conrad, 1970, The athermal component of the flow stress in crystalline solids, Mater. Sci. Eng., 6, 260, 10.1016/0025-5416(70)90054-6

Cho, 2000, Static and dynamic strain aging in304austenitic stainless steel at elevated temperature, J. Mater. Sci. Lett., 19, 2019, 10.1023/A:1026767120165

Cheng, 2000, A model for experimentally observed high-strain-rate dynamic strain aging in titanium, Acta Mater., 48, 3131, 10.1016/S1359-6454(00)00124-5

Cheng, 2001, A unified constitutive model for strain-rate and temperature dependent behavior of molybdenum, Mech. Mater., 33, 603, 10.1016/S0167-6636(01)00076-X

Johnson, G.R., Cook, W.H., 1983. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the Seventh International Symposium on Ballistic, The Hague, The Netherlands, pp. 541–547

Johnson, 1988, Evaluation of cylinder-impact test data for constitutive model constants, J. Appl. Phys., 64, 3901, 10.1063/1.341344

Krauss, 1990, Microstructures, processing, and properties of steel, ASM Handbook, 1, 126

Kocks, 1975, Thermodynamics and kinetics of slip, Progress Mater. Sci., 19, 1

Kubin, 1992, On static strain aging, Acta Metall., 40, 1037, 10.1016/0956-7151(92)90081-O

Kapoor, 1998, Determination of temperature rise during high strain rate deformation, Mech. Mater., 27, 1, 10.1016/S0167-6636(97)00036-7

Liang, 1999, A critical review of experimental results and constitutive models for BCC and FCC metals over a wide range of strain rates and temperatures, Int. J. Plast., 15, 963, 10.1016/S0749-6419(99)00021-2

Nakada, 1970, Serrated flow in Ni–C alloys, Acta Metall., 18, 437, 10.1016/0001-6160(70)90129-X

Nemat-Nasser, 1999, Flow stress of commercially pure niobium over a broad range of temperatures and strain rates, Mater. Sci. Eng. A, 284, 202, 10.1016/S0921-5093(00)00740-1

Nemat-Nasser, 1997, Direct measurement of isothermal flow stress of metals at elevated temperatures and high strain rates with application to Ta and Ta–W alloys, Acta Mater., 45, 907, 10.1016/S1359-6454(96)00243-1

Nemat-Nasser, 1998, Flow stress of fcc polycrystals with application to OFHC Cu, Acta Mater., 46, 565, 10.1016/S1359-6454(97)00230-9

Nemat-Nasser, 1991, Hopkinson techniques for dynamic recovery experiments, Proc.R. Soc. Lond, 435, 371, 10.1098/rspa.1991.0150

Nemat-Nasser, 1999, Experimentally based micromechanical modeling of dynamic response of molybdenum, Scr. Mat., 40, 859, 10.1016/S1359-6462(99)00041-X

Nemat-Nasser, 2001, Theromechanical response of AL-6XNstainless steel over a wide range of strain rates and temperatures, J. Mech. Phys. Solids, 49, 1823, 10.1016/S0022-5096(00)00069-7

Ono, 1968, Temperature dependence of dispersed barrier hardening, J. Appl. Phys., 39, 1803, 10.1063/1.1656434

Taylor, 1934, The mechanism of plastic deformation of crystals––I, II, Proc. R. Soc. London A, 145, 362, 10.1098/rspa.1934.0106

Taylor, 1938, Plastic strain in metals, J. Inst. Metals, 62, 307