Thermodynamic description of the quaternary Al-Si-Mg-Sc system and its application to the design of novel Sc-additional A356 alloys

John, 2004

Samuel, 2014, Effect of grain refiner on the tensile and impact properties of Al–Si–Mg cast alloys, Mater. Des., 56, 468, 10.1016/j.matdes.2013.11.058

Liu, 2015, Twin-controlled growth of eutectic Si in unmodified and Sr-modified Al–12.7%Si alloys investigated by SEM/EBSD, Acta Mater., 97, 338, 10.1016/j.actamat.2015.06.041

Pramod, 2015, Effect of Sc addition on the microstructure and wear properties of A356 alloy and A356–TiB2 in situ composite, Mater. Des., 78, 85, 10.1016/j.matdes.2015.04.026

Patakham, 2013, Modification mechanism of eutectic silicon in Al–6Si–0.3Mg alloy with scandium, J. Alloys Compd., 575, 273, 10.1016/j.jallcom.2013.05.139

Cousineau, 2001, 157

Liang, 2014, Phosphorus in Al–Si cast alloys: thermodynamic prediction of the AlP and eutectic (Si) solidification sequence validated by microstructure and nucleation undercooling data, Acta Mater., 72, 41, 10.1016/j.actamat.2014.02.042

Eiken, 2015, Impact of P and Sr on solidification sequence and morphology of hypoeutectic Al–Si alloys: combined thermodynamic computation and phase-field simulation, Acta Mater., 98, 152, 10.1016/j.actamat.2015.06.056

Scheil, 1942, Bemerkungen zur Schichtkristallbildung, Z. Metallkd, 34, 70

Zhang, 2012, TCAL1 and MOBAL2 – the development and validation of new thermodynamic and mobility databases for aluminium alloys, 13, 305

Tang, 2012, Thermodynamic description of the Al–Mg–Si system using a new formulation for the temperature dependence of the excess Gibbs energy, Thermochim. Acta, 527, 131, 10.1016/j.tca.2011.10.017

Gröbner, 1999, Experimental investigations and thermodynamic calculation in the Al-Mg-Sc system, Z. Metallkd., 90, 872

Zhang, 2016, Phase equilibria and solidification characteristics of the Al–Sc–Si alloys, J. Mater. Sci., 51, 1644, 10.1007/s10853-015-9487-x

Davydov, 2000, Scientific principles of making an alloying addition of scandium to aluminium alloys, Mater. Sci. Eng. A, 280, 30, 10.1016/S0921-5093(99)00652-8

Xu, 2015, The synergic effects of Sc and Zr on the microstructure and mechanicalproperties of Al–Si–Mg alloy, Mater. Des., 88, 485, 10.1016/j.matdes.2015.09.045

Tzeng, 2015, The effect of trace Sc on the quench sensitivity of Al–7Si–0.6Mg alloys, Mater. Lett., 161, 340, 10.1016/j.matlet.2015.08.108

Zhang, 2012, Effects of Sc content on the microstructure of As-Cast Al-7 wt.%Si alloys, Mater. Charact., 66, 104, 10.1016/j.matchar.2011.11.005

Cho, 2008, Effect of strontium and phosphorus on eutectic Al-Si nucleation and formation of β-Al5FeSi in hypoeutectic Al-Si foundry alloys, Metall. Mater. Trans. A, 39, 2435, 10.1007/s11661-008-9580-8

Campbell, 2009, Technical forum: reader and author dialogue, Int. J. Met. Cast, 3, 65-59

Lu, 1987, The mechanism of silicon modification in aluminum–silicon alloys: impurity induced twinning, Metall. Trans. A, 18, 1721, 10.1007/BF02646204

Cacciamani, 1999, Thermodynamic measurements and assessment of the Al-Sc system, Intermetallics, 7, 101, 10.1016/S0966-9795(98)00022-3

Kang, 2008, Critical evaluation and thermodynamic optimization of the Al–Ce, Al–Y, Al–Sc, and Mg–Sc binary systems, Calphad, 32, 413, 10.1016/j.calphad.2008.03.002

Bo, 2010, Thermodynamic analysis of Al–Sc, Cu–Sc and Al–Cu–Sc system, J. Alloys Compd., 490, 318, 10.1016/j.jallcom.2009.10.003

Shevchenko, 2014, Thermodynamic properties of Al-Sc alloys, Powder Metall. Metal Ceram., 53, 243, 10.1007/s11106-014-9610-6

Pisch, 1998, Mg-rich phase equilibria and thermodynamic assessment of the Mg-Sc System, Z. Metallkd., 89, 474

Tyvanchuk, 1988, Isothermal section of the Sc-Al-Si system at 770 K, Metally, 4, 187

Rokhlin, 2012, Phase equilibria in aluminum-rich Al-Sc-Si alloys during solidification, Russ. Metall., 7, 606, 10.1134/S0036029512070129

Dinsdale, 1991, SGTE data for pure elements, Calphad, 15, 317, 10.1016/0364-5916(91)90030-N

Redlich, 1948, Algebraic representation of thermodynamic properties and the classification of solutions, J. Ind. Eng. Chem., 40, 84, 10.1021/ie50458a036

Hao, 2014, The quaternary Al-Fe-Ni-Si phase equilibria in Al-rich corner: experimental measurement and thermodynamic modeling, J. Mater. Sci., 49, 1157, 10.1007/s10853-013-7795-6

Zhang, 2009, Thermodynamic properties of the Al-Fe-Ni system acquired via a hybrid approach combining calorimetry, first-principles and CALPHAD, Acta Mater., 57, 5324, 10.1016/j.actamat.2009.07.031

Sundman, 1981, A regular solution model for phases with several components and sublattices, suitable for computer applications, J. Phys. Chem. Solids, 42, 297, 10.1016/0022-3697(81)90144-X

Sundman, 1985, The Thermo-Calc databank system, Calphad, 9, 153, 10.1016/0364-5916(85)90021-5

Maxwell, 1975, A simple model for grain refinement during solidification, Acta Metall., 23, 229, 10.1016/0001-6160(75)90188-1

Jiang, 2013, Correlation of microstructure with mechanical properties and fracture behavior of A356-T6 aluminum alloy fabricated by expendable pattern shell casting with vacuum and low-pressure, gravity casting and lost foam casting, Mater. Sci. Eng. A, 560, 396, 10.1016/j.msea.2012.09.084

Chen, 2015, Thermodynamic, elastic and electronic properties of AlSc2Si2, Mater. Lett., 138, 148, 10.1016/j.matlet.2014.10.006