Thermo fatigue cracking of die casting dies

Srivastava, 2004, Computer modeling and prediction of thermal fatigue cracking in die-casting tooling, Wear, 256, 38, 10.1016/S0043-1648(03)00281-3 Joshi, 2001, Dissolution and soldering behavior of nitrided hot working steel with multilayer LAFAD PVD coatings, Surf Coat Technol, 146–147, 338, 10.1016/S0257-8972(01)01426-8 Joshi, 2004, Intermetallic formation and its relation to interface mass loss and tribology in die casting dies, Wear, 256, 1232, 10.1016/j.wear.2003.08.001 Persson, 2004, Failure modes in field-tested brass die casting dies, J Mater Process Technol, 148, 108, 10.1016/j.jmatprotec.2004.01.052 Persson, 2004, Simulation and evaluation of thermal fatigue cracking of hot work tool steels, Int J Fatigue, 26, 1095, 10.1016/j.ijfatigue.2004.03.005 Persson, 2005, Thermal fatigue cracking of surface engineered hot work tool steels, Surf Coat Technol, 191, 216, 10.1016/j.surfcoat.2004.04.053 Wang, 1997, A study of PVD coatings and die materials for extended die-casting die life, Surf Coat Technol, 94–95, 60, 10.1016/S0257-8972(97)00476-3 Bergant, 2011, Laser cladding and heat treatment of Ni–Co–Mo maraging steel, J ASTM Int, 8, 12 Brnić, 2009, Tool material behavior at elevated temperatures, Mater Manuf Process, 24, 758, 10.1080/10426910902809800 Pleterski, 2011, Use of Pulse Shaping in Laser Cladding of Cold-Work Tool Steel, J Mater Sci Technol, 27, 707, 10.1016/S1005-0302(11)60130-8 Pleterski, 2011, Blanking punch life improvement by laser cladding, Eng Fail Anal, 18, 1527, 10.1016/j.engfailanal.2011.05.010 Muhič, 2011, A new approach to monitoring thermal fatigue cracks in die casting moulds, Int J Mater Res, 102, 69, 10.3139/146.110444 Fazarinc, 2011, Thermal fatigue testing of bulk functionally graded materials, Procedia Eng, 10, 692, 10.1016/j.proeng.2011.04.115 Krušič, 2009, The impact of the forming system parameters on tool service life and product accuracy in cold forming, Int J Microstruct Mater Properties, 4, 547, 10.1504/IJMMP.2009.031590 Peet, 2011, Fatigue of extremely fine bainite, Mater Sci Technol, 27, 119, 10.1179/026708310X12688283410244 Mrvar, 2006, Characterization of solidification and hot workability of MgAl6Mn foundry alloy, RMZ-Mater Geoenviron, 53, 175 Corujeira Gallo, 2010, Premature thermal fatigue failure of aluminium injection dies with duplex surface treatment, Mater Sci Eng: A, 527, 7764, 10.1016/j.msea.2010.08.048 Wang, 2009, Thermal fatigue behavior of an iron-based laser sintered material, Mater Sci Eng: A, 513–514, 64, 10.1016/j.msea.2009.01.053 Wang Y. Why Die Casting Dies Fail, Paper, 10th SDCE International die casting exposition & congress, NADCA, St. Louis, Missouri; 1979. Sokovic, 2006, Improvement of tool life of die-casting tools with duplex treatment, Int J Microstruct Mater Properties, 1, 231, 10.1504/IJMMP.2006.010629 Panjan, 2004, Improvement of die-casting tools with duplex treatment, Surf Coat Technol, 180–181, 561, 10.1016/j.surfcoat.2003.10.119 Kulkarni, 2002, Thermal cracking behavior of multi-layer LAFAD coatings on nitrided die steels in liquid aluminum processing, Surf Coat Technol, 149, 171, 10.1016/S0257-8972(01)01452-9 Srivastava, 2003, A multilayer coating architecture to reduce heat checking of die surfaces, Surf Coat Technol, 163–164, 631, 10.1016/S0257-8972(02)00690-4 Klobčar, 2008, Suitability of maraging steel weld cladding for repair of die casting tooling. Part II: Influence of ageing during aluminium alloy die casting on maraging steel weld microstructure, mechanical properties and crack growth, Int J Mater Res, 99, 1006, 10.3139/146.101733 Klobčar, 2009, Suitability of maraging steel weld cladding for repair of die-casting tooling. Part 1, Influence of welding and aging heat treatment on 18% Ni maraging steel weld microstructure and mechanical properties, Int J Mater Res, 100, 713, 10.3139/146.110078 Klobčar, 2011, Laser grooving of surface cracks on hot work tool steel, Metalurgija (Sisak), 50, 235 Klobčar, 2008, Thermal fatigue of materials for die-casting tooling, Mater Sci Eng.: A, 472, 198, 10.1016/j.msea.2007.03.025 Klobčar, 2008, Aging of maraging steel welds during aluminium alloy die casting, Comput Mater Sci, 44, 515, 10.1016/j.commatsci.2008.04.011 Fuchs KD. Hot-work tool steels with improved properties for die casting applications. In: Rosso M, Actis Grande M, Ugues D, editors. Proceedings of 7th international tooling conference, Torino; 2006. Ahmer Z et al. Cyclic behaviour simulation of X38CrMoV5-47HRC (AISI H11) tempered martensitic hot work tool steel. In: Rosso M, Actis Grande M, Ugues D, editors. Tool, proceedings of 7th international tooling conference, Torino; 2006. p. 513–20. Bergström J, Rézai-Aria F. High temperature fatigue of tool steels. In: Rosso M, Actis Grande M, Ugues D, editors. Tool, proceedings of 7th international tooling conference, Torino; 2006. Michaud P et al. Influence of chemical composition on the precipitation of secondary carbides in modified AISI H11 hot-work tool steels. In: Rosso M, Actis Grande M, Ugues D, editors. Tool, proceedings of 7th international tooling conference, Torino; 2006. p. 733–40. Daffos C, Lamesle P, Rézai-Aria F. Fatigue-oxidation interaction models for life prediction of hot forming tools steels under transient thermomechanical loadings. In: Rosso M, Actis Grande M, Ugues D, editors. Tool, proceedings of 7th international tooling conference, Torino; 2006. p. 471–8. Medjedoub F et al. Experimental conditions and environmental effects on thermal fatigue damage accumulation and life of die-casting steel X38CrMoV5 (AISI H11). In: Rosso M, Actis Grande M, Ugues D, editors. Tool, proceedings of 7th international tooling conference, Torino; 2006. p. 461–70. Kosec, 2003, Temperature field analysis on active working surface of the die-casting die, Metall, 57, 134 Kosec, 2001, Analysis of casting die failures, Eng Fail Anal, 8, 355, 10.1016/S1350-6307(00)00032-7 Kosel, 1983, Heat checking of hot work tools, Mech Eng J, 29, E1 Muhič, 2010, Thermal fatigue cracking of die-casting dies, Metalurgija (Sisak), 49, 9 Muhic, 2010, Analysis of die casting tool material = Analiza materiala orodja za tlačno litje, Stroj Vestn, 56, 351 Klobčar, 2008, Thermal stresses in aluminium alloy die casting dies, Comput Mater Sci, 43, 1147, 10.1016/j.commatsci.2008.03.009 Hibbit KS. Inc. Abaqus 6.7. <Marlok brochure 2005.pdf>, In: http://www.metso.com/MEP/info.nsf/WebWID/WTB-051025-22570-3FF66/$File/Marlok%20brochure%202005.pdf(Ed.), 2005. Ravne M. Materialne lastnosti jekla H13, 2008 <www.sz-metal.si>. Böhler. High-performance materials for the aircraft and aerospace industry. p. 1–16. http://www.lacour-faber.dk/dk/download/bohler_staal_til_rum_og_luftfart.pdf. Properties of 1.6356 welding rod <http://www.bohler-uddeholm.cz/czech/files/Prirucka_UTP_AJ.pdf>.