Thermal properties of intumescent coating with waterborne melamine-acrylic emulsion resin for plywood

Li, M, Bian, C, Yang, GX, Qiang, XH, “Facile Fabrication of Water-Based and Non-Fluorinated Superhydrophobic Sponge for Efficient Separation of Immiscible Oil/Water Mixture and Water-in-Oil Emulsion.” Chem. Eng. J., 368 350–358 (2019)

Sharifi, Z, Pakshir, M, Amini, A, Rafiei, R, “Hybrid Graphene Oxide Decoration and Water-Based Polymers for Mild Steel Surface Protection in Saline Environment.” J. Ind. Eng. Chem., 74 41–54 (2019)

Jiang, J, Li, J, Gao, Q, “Effect of Flame Retardant Treatment on Dimensional Stability and Thermal Degradation of Wood.” Construct. Build. Mater., 75 74–81 (2015)

Huang, Y, Jones, FN, “Synthesis of Crosslinkable Acrylic Latexes by Emulsion Polymerization in the Presence of Etherified Melamine-Formaldehyde (MF) Resins.” Prog. Org. Coat., 28 133–141 (1996)

Han, RL, Zhang, YF, “Studies on Performance of Cured Water-Borne Melamine–Acrylic Emulsion Coatings.” J. Adhes. Sci. Technol., 25 883–892 (2011)

Córdoba, CA, Collins, SE, Passeggi, MCG, Vaillard, SE, Gugliotta, LM, Minari, RJ, “Crosslinkable Acrylic-Melamine Latex Produced by Miniemulsion Polymerization.” Prog. Org. Coat., 118 82–90 (2018)

Córdoba, CA, Ronco, LI, Passeggi, MCG, Minari, RJ, Gugliotta, LM, “Waterborne Acrylic-Melamine Latexes with Controlled Film Microstructure.” Prog. Org. Coat., 136 105239 (2019)

Magami, SM, Guthrie, JT, “Amino Resin Cross-Linked Can Coatings.” Surf. Coat. Int., 95 64–73 (2012)

Paine, MRL, Pianegonda, NA, Huynh, TT, Manefield, M, MacLaughlin, SA, Rice, SA, Barker, PJ, Blanksby, SJ, “Evaluation of Hindered Amine Light Stabilisers and Their N-Chlorinated Derivatives as Antibacterial and Antifungal Additives for Thermoset Surface Coatings.” Prog. Org. Coat., 99 330–336 (2016)

Li, ZS, Wang, HJ, Zhang, S, Zhao, W, Jiang, QH, Wang, MQ, Zhao, J, Lu, W, “Smoke Density Evaluation of Acrylic Resin and Intumescent Flame Retardant Coatings.” Pigm. Resin Technol., 45 86–92 (2016)

Dong, X, Yang, JN, Hua, XZ, Nie, SB, Kong, FB, “Synthesis of a Novel Char-Forming Agent (PEIC): Improvement in Flame Retardancy, Thermal Stability, and Smoke Suppression for Intumescent Flame-Retardant Polypropylene Composites.” J. Appl. Polym. Sci., 137 48296 (2020)

Yew, MC, Sulong, NR, “Fire-Resistive Performance of Intumescent Flame-Retardant Coatings for Steel.” Mater. Des., 34 719–724 (2012)

Jaramillo, AF, Díaz-Gómez, A, Ramirez, J, Berrio, M, Cornejo, V, Rojas, D, Montoya, L, Mera, A, Melendrez, M, “Eco-Friendly Fire-Resistant Coatings Containing Dihydrogen Ammonium Phosphate Microcapsules and Tannins.” Coatings, 11 280 (2021)

Liang, SY, Neisius, NM, Gaan, S, “Recent Developments in Flame Retardant Polymeric Coatings.” Prog. Org. Coat., 76 1642–1665 (2013)

Yew, MC, Sulong, NHR, Yew, MK, Amalina, MA, Johan, MR, “Influences of Flame-Retardant Fillers on Fire Protection and Mechanical Properties of Intumescent Coatings.” Prog. Org. Coat., 78 59–66 (2015)

Chuang, CS, Tsai, KC, Wang, MK, Ou, CC, Ko, CH, Shiau, IL, “Effects of Intumescent Formulation for Acrylic-Based Coating on Flame-Retardancy of Painted Red Lauan (Parashorea spp.) Thin Plywood.” Wood Sci. Technol., 42 593–607 (2008)

Alongi, J, Han, ZD, Bourbigot, S, “Intumescence: Tradition Versus Novelty. A Comprehensive Review.” Prog. Polym. Sci., 51 28–73 (2015)

Pimenta, JT, Concalves, C, Hiliou, L, Coelho, JFJ, Magalhars, FD, “Effect of Binder on Performance of Intumescent Coatings.” J. Coat. Technol. Res., 13 227–238 (2016)

Puri, RG, Khanna, AS, “Intumescent Coatings: A Review on Recent Progress.” J. Coat. Technol. Res., 14 1–20 (2017)

Anees, SM, Dasari, A, “A Review on the Environmental Durability of Intumescent Coatings for Steels.” J. Mater. Sci., 53 124–145 (2018)

Duquesne, S, Magnet, S, Jana, C, Delobel, R, “Thermoplastic Resins for Thin Film Intumescent Coatings - Towards a Better Understanding of Their Effect on Intumescence Efficiency.” Polym. Degrad. Stab., 88 63–69 (2005)

Samyn, F, Bourbigot, S, “Thermal Decomposition of Flame Retarded Formulations PA6/Aluminum Phosphinate/Melamine Polyphosphate/Organomodified Clay: Interactions Between the Constituents?” Polym. Degrad. Stab., 97 2217–2230 (2012)

Girardin, B, Fontaine, G, Duquesne, S, Forsth, M, Bourbigot, S, “Measurement of Kinetics and Thermodynamics of the Thermal Degradation for Flame Retarded Materials: Application to EVA/ATH/NC.” J. Anal. Appl. Pyrol., 124 130–148 (2017)

Chuang, CS, Fan, YJ, Sheen, HJ, “Flame Retardancy Effects on Intumescent Coatings with Vinyl Acetate Copolymers.” Int. Polym. Process., 34 541–550 (2019)

Chuang, CS, Wu, CY, Wu, KC, Sheen, HJ, “Flame Retardancy of Water-Based Intumescent Coatings with Etherified Melamine-Formaldehyde and Polyvinyl Acetate Copolymer Hybrid Resin.” J. Appl. Polym. Sci., 137 e49279 (2020)

Pizzi, A, Panamgama, LA, “Diffusion Hindrance vs. Wood-Induced Catalytic Activation of MUF Adhesive Polycondensation.” J. Appl. Polym. Sci., 58 109–115 (1995)

Chiu, HT, Huang, YC, Chiang, CH, “Curing Behavior of Anionic Poly(urethane urea) Dispersions Crosslinked with Partially Methylated Melamine Formaldehyde.” J. Appl. Polym. Sci., 106 849–856 (2007)

Merline, DJ, Vukusic, S, Abdala, AA, “Melamine Formaldehyde: Curing Studies and Reaction Mechanism.” Polym. J., 45 413–419 (2013)

Farag, ZR, Friedrich, JF, Kruger, S, “Cured Melamine Systems as Thick Fire-Retardant Layers Deposited by Combination of Plasma Technology and Dip-Coating.” J. Adhes. Sci. Technol., 29 807–820 (2015)

Xie, Y, Xu, J, Militz, H, Wang, F, Wang, Q, Mai, C, Xiao, Z, “Thermo-Oxidative Decomposition and Combustion Behavior of Scots Pine (Pinus sylvestris L.) Sapwood Modified with Phenol- and Melamine-Formaldehyde Resins.” Wood Sci. Technol., 50 1125–1143 (2016)

Xiao, Z, Liu, S, Zhang, Z, Mai, C, Xie, Y, Wang, Q, “Fire Retardancy of an Aqueous, Intumescent, and Translucent Wood Varnish Based on Guanylurea Phosphate and Melamine-Urea-Formaldehyde Resin.” Prog. Org. Coat., 121 64–72 (2018)

Lu, H, Zheng, SX, “Miscibility and Phase Behavior in Thermosetting Blends of Polybenzoxazine and Poly(ethylene oxide).” Polymer, 44 4689–4698 (2003)

Kim, S, Kim, HJ, “Study of Miscibility of Melamine-Formaldehyde Resin and Poly(vinyl acetate) Blends for use as Adhesives in Engineered Flooring.” J. Adhes. Sci. Technol., 20 209–219 (2006)

Camino, G, Costa, L, Martinasso, G, “Intumescent Fire-Retardant Systems.” Polym. Degrad. Stab., 23 359–376 (1989)

Lotsch, BV, Schnick, W, “New Light on an Old Story: Formation of Melam During Thermal Condensation of Melamine.” Chem. Eur. J., 13 4956–4968 (2007)

Dasari, A, Yu, ZZ, Cai, GP, Mai, YW, “Recent Developments in the Fire Retardancy of Polymeric Materials.” Prog. Polym. Sci., 38 1357–1387 (2013)

Liu, X, Hao, JW, Gaan, S, “Recent Studies on the Decomposition and Strategies of Smoke and Toxicity Suppression for Polyurethane Based Materials.” RSC Adv., 6 74742–74756 (2016)

Le Bras, M, Bourbigot, S, Revel, B, “Comprehensive Study of the Degradation of an Intumescent EVA-based Material During Combustion.” J. Mater. Sci., 34 5777–5782 (1999)

Bourbigot, S, Le Bras, M, Dabrowski, F, Gilman, JW, Kashiwagi, T, “PA-6 Clay Nanocomposite Hybrid as Char Forming Agent in Intumescent Formulations.” Fire Mater., 24 201–208 (2000)

Bourbigot, S, Le Bras, M, Delobel, R, Decressaing, R, Amourex, JP, “Synergistic Effect of Zeolite in an Intumescence Process: Study of the Carbonaceous Structures using Solid-State NMR.” J. Chem. Soc. Faraday Trans., 92 149–158 (1996)

Duncan, TM, Douglass, DC, “On the 31P Chemical Shift Anisotropy in Condensed Phosphates.” Chem. Phys., 87 339–349 (1984)