Thermal-mechanical crack propagation in orthotropic composite materials by the extended four-node consecutive-interpolation element (XCQ4)

Sih, 1965, On cracks in rectilinear anisotropic bodies, Int J Fract Mech, 1, 189, 10.1007/BF00186854

Bowie, 1972, Central crack in plane orthotropic rectangular sheet, Int J Fract Mech, 8, 49, 10.1007/BF00185197

Viola, 1989, Crack propagation in an orthotropic medium under general loading, Eng Fract Mech, 34, 1155, 10.1016/0013-7944(89)90277-4

Nobile, 2005, Fracture analysis for orthotropic cracked plates, Compos Struct, 68, 285, 10.1016/j.compstruct.2004.03.020

Zhang, 2015, A fictitious crack XFEM with two new solution algorithms for cohesive crack growth modeling in concrete structures, Eng Comput, 32, 473, 10.1108/EC-08-2013-0203

Yu, 2018, Numerical simulation of 2-D weak and strong discontinuities by a novel approach based on XFEM with local mesh refinement, Comput Struct, 196, 112, 10.1016/j.compstruc.2017.11.007

de Luycker, 2011, X-FEM in isogeometric analysis for linear fracture mechanics, Int J Numer Meth Eng, 87, 541, 10.1002/nme.3121

Bui, 2015, Extended isogeometric dynamic and static fracture analysis for cracks in piezoelectric materials using nurbs, Comput Methods Appl Mech Eng, 295, 470, 10.1016/j.cma.2015.07.005

Singh, 2017, A simple, efficient and accurate Beziér extraction based T-spline XIGA for crack simulations, Theoret Appl Fract Mech, 88, 74, 10.1016/j.tafmec.2016.12.002

Nguyen, 2014, Crack growth modeling in elastic solids by the extended meshfree galerkin radial point interpolation method, Eng Anal Boundary Elem, 44, 87, 10.1016/j.enganabound.2014.04.021

Nguyen, 2016, Transient dynamic fracture analysis by and extended meshfree method with different crack-tip enrichments, Meccanica, 52, 2363, 10.1007/s11012-016-0589-6

Bui, 2018, Analysis of transient dynamic fracture parameters of cracked functionally graded composites by improved meshfree methods, Theoret Appl Fract Mech, 96, 642, 10.1016/j.tafmec.2017.10.005

Duflot, 2008, The extended finite element method in thermoelastic fracture mechanics, Int J Numer Meth Eng, 74, 827, 10.1002/nme.2197

Pant, 2010, Numerical simulation of thermo-elastic fracture problems using element free galerkin method, Int J Mech Sci, 52, 1745, 10.1016/j.ijmecsci.2010.09.008

Bouhala, 2012, Thermal and thermo-mechanical influence on crack propagation using an extended meeshfree method, Eng Fract Mech, 88, 35, 10.1016/j.engfracmech.2012.04.001

Nguyen, 2017, Simulation of dynamic and static thermoelastic fracture problems by extended nodal gradient finite elements, Int J Mech Sci, 134, 370, 10.1016/j.ijmecsci.2017.10.022

Pathak, 2015, Fatigue crack growth simulations of 3D linear elastic cracks under thermal load by XFEM, Frontiers Struct Civil Eng, 9, 359, 10.1007/s11709-015-0304-z

Pathak, 2016, Three-dimensional quasi-static interfacial crack growth simulations in thermo-mechanical environment by coupled FE-EFGapproach, Theoret Appl Fract Mech, 86, 267, 10.1016/j.tafmec.2016.08.001

Pathak, 2016, Numerical simulation of 3D therrmo-elastic fatigue crack growth problems using coupled FE-EFG approach, J Inst Eng (India): Ser C, 98, 295

Pathak, 2017, Three-dimensional quasi-static fatigue crack growth analysis in functionally graded materials (FGMs) using coupled FE-XFEG approach, Theoret Appl Fract Mech, 92, 59, 10.1016/j.tafmec.2017.05.010

Kumar, 2018, Experimental and numerical studies to estimate fatigue crack growth behavior of Ni-based super alloy, Theoret Appl Fract Mech, 96, 604, 10.1016/j.tafmec.2018.07.002

Jernkvist, 2001, Fracture of wood under mixed mode loading II. Experimental investigation of Picea abies, Eng Fract Mech, 68, 565, 10.1016/S0013-7944(00)00128-4

Cahill, 2014, An experimental/numerical investigation into the main driving force of crack propagation in uni-directional fibre-reinforced composite laminae, Compos Struct, 107, 119, 10.1016/j.compstruct.2013.05.039

Ke, 2008, Determination of fracture toughness of anisotropic rocks by boundary element method, Rock Mech Rock Eng, 41, 509, 10.1007/s00603-005-0089-9

Aliabadi, 1998, Crack growth analysis in homogeneous orthotropic laminates, Compos Sci Technol, 58, 1697, 10.1016/S0266-3538(97)00240-6

Kim, 2003, The interaction integral for fracture of orthotropic functionally graded materials: evaluation of stress intensity factors, Int J Solids Struct, 40, 3967, 10.1016/S0020-7683(03)00176-8

Asadpoure, 2007, Developing new enrichment functions for crack simulation in orthotropic media by the extended finite element method, Int J Numer Meth Eng, 69, 2150, 10.1002/nme.1839

Ghorashi, 2011, Orthotropic enriched element free Galerkin method for fracture analysis of composites, Eng Fract Mech, 78, 1906, 10.1016/j.engfracmech.2011.03.011

Motamedi, 2010, Dynamic crack propagation analysis of orthotropic media by the extended finite element method, Int J Fract, 161, 21, 10.1007/s10704-009-9423-7

Pasternak, 2012, Boundary integral equations and the boundary element method for fracture mechanics analysis in 2D anisotropic thermoelasticity, Eng Anal Boundary Elem, 36, 1931, 10.1016/j.enganabound.2012.07.007

Bouhala, 2015, Thermo-anisotropic crack propagation by XFEM, Int J Mech Sci, 103, 235, 10.1016/j.ijmecsci.2015.09.014

Bayesteh, 2015, Thermo-mechanical fracture study of inhomogeneous cracked solids by the extended isogeometric analysis method, Eur J Mech A/Solids, 51, 123, 10.1016/j.euromechsol.2014.12.004

Zheng, 2010, A novel twice-interpolation finite element method for solid mechanics problems, Acta Mech Sin, 26, 265, 10.1007/s10409-009-0265-3

Bui, 2014, A consecutive-interpolation quadrilateral element (CQ4): formulation and applications, Finite Elem Anal Des, 84, 14, 10.1016/j.finel.2014.02.004

Bui, 2016, Analysis of 2-dimensional transient problems for linear elastic and piezoelectric structures using the consecutive-interpolation quadrilateral element (CQ4), Eur J Mech A Solids, 58, 112, 10.1016/j.euromechsol.2016.01.010

Nguyen, 2016, Enhanced nodal gradient 3D consecutive-interpolation tetrahedral element (CTH4) for heat transfer analysis, Int J. Heat Mass Transf, 103, 14, 10.1016/j.ijheatmasstransfer.2016.07.038

Nguyen, 2017, Numerical analysis of 3-D solids and composite structures by an enhanced 8-node hexahedral element, Finite Elem Anal Des, 131, 1, 10.1016/j.finel.2017.04.002

Kang, 2015, An extended consecutive-interpolation quadrilateral element (XCQ4) applied to linear elastic fracture mechanics, Acta Mech, 226, 3991, 10.1007/s00707-015-1451-y

Kang, 2017, Quasi-static crack propagation simulation by an enhanced nodal gradient finite element with different enrichments, Theorical Appl Fract Mech, 87, 61, 10.1016/j.tafmec.2016.10.006

Kang, 2017, Dynamic stationary crack analysis of isotropic solids and anisotropic composites by enhanced local enriched consecutive-interpolation elements, Compos Struct, 180, 221, 10.1016/j.compstruct.2017.08.021

Moës, 1999, A finite element method for crack growth without remeshing, Int J Numer Meth Eng, 46, 131, 10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J

Lekhnitskii, 1963

Hu, 2013, A new enriched finite element for fatigue crack growth, Int J Fatigue, 48, 247, 10.1016/j.ijfatigue.2012.11.003

Hu, 2016, A size independent enriched finite element for the modeling of bimaterial interface cracks, Comput Struct, 172, 1, 10.1016/j.compstruc.2016.05.005

Hu, 2017, A novel size independent symplectic analytical singular element for inclined crack terminating at bimaterial interface, Appl Math Model, 50, 361, 10.1016/j.apm.2017.05.046

Hu, 2017, A new cohesive crack tip symplectic analytical singular element involving plastic zone length for fatigue crack growth prediction under variable amplitude cyclic loading, Eur J Mech A Solids, 65, 79, 10.1016/j.euromechsol.2017.03.008

Belytschko, 2001, Arbitrary discontinuities in finite elements, Int J Numer Meth Eng, 50, 993, 10.1002/1097-0207(20010210)50:4<993::AID-NME164>3.0.CO;2-M

Fries, 2008, A corrected XFEM approximation without problems in blending elements, Int J Numer Meth Eng, 75, 503, 10.1002/nme.2259

Giner, 2009, An Abaqus implementation of the extended finite element method, Eng Fract Mech, 76, 347, 10.1016/j.engfracmech.2008.10.015

Hu, 2016, Integrated XFEM-CE analysis of delamination migration in multi-directional composite laminates, Compos A, 90, 161, 10.1016/j.compositesa.2016.07.007

Agathos, 2016, A well-conditioned and optimally convergent XFEM for 3D linear elastic fracture, Int J Numer Meth Eng, 105, 643, 10.1002/nme.4982

Chen, 2014, A floating node method for the modelling of discontinuities in composites, Eng Fract Mech, 127, 104, 10.1016/j.engfracmech.2014.05.018

Hu, 2018, Modelling delamination migration using virtual embedded cohesive elements formed through floating nodes, Compos Struct, 204, 500, 10.1016/j.compstruct.2018.07.120

Hattiangadi, 2005, A numerical study on interface crack growth under heat flux loading, Int J Solids Struct, 42, 6335, 10.1016/j.ijsolstr.2005.05.050

Hu, 2016, A symplectic analytical singular element for steady-state thermal conduction with singularities in composite structures, Numerical Heat Transf Part B: Fundamentals, 70, 406, 10.1080/10407790.2016.1230382

Hu, 2017, Study on steady-state thermal conduction with singularities in multi-material composites, Int J Heat Mass Transf, 104, 861, 10.1016/j.ijheatmasstransfer.2016.09.008

Hu, 2018, A symplectic analytical singular element for steady-state thermal conduction with singularities in anisotropic material, J Heat Transfer, 140, 091301, 10.1115/1.4040085

Moës, 2003, A computational approach to handle complex microstructure geometries, Comput Methods Appl Mech Eng, 192, 3163, 10.1016/S0045-7825(03)00346-3

Belytschko, 1994, Element-Free Galerkin methods, Int J Numer Meth Eng, 37, 229, 10.1002/nme.1620370205

Banks-Sills, 2004, The conservative M-integral for thermal-elastic problems, Int J Fract, 125, 149, 10.1023/B:FRAC.0000021065.46630.4d

Dunavant, 1985, High degree efficient symmetrical Gaussian quadrature rules for the triangle, Int J Numer Meth Eng, 21, 1129, 10.1002/nme.1620210612

Qian, 1996, Mixed mode fatige crack growth: a literature survey, Eng Fract Mech, 55, 969, 10.1016/S0013-7944(96)00071-9

Adden, 2006, Material forces as a simple criterion for the description of crck-turning problems, Aerosp Sci Technol, 10, 519, 10.1016/j.ast.2006.03.009

Baydoun, 2012, Crack propagation criteria in three dimensions using the XFEM and an explicit-implicit crack description, Int J Fract, 178, 51, 10.1007/s10704-012-9762-7

Sajjadi, 2015, A novel mixed mode brittle fracture criterion for crack prediction under static and fatigue loading, Fatigure Fract Eng Mater Struct, 38, 1372, 10.1111/ffe.12320

Erdogan, 1963, On the crack extension in plates under plane loading and transverse shear, J Basic Eng, 85, 519, 10.1115/1.3656897

Stolarska, 2001, Modelling crack growth by level sets in the extended finite method, Int J Numer Meth Eng, 51, 943, 10.1002/nme.201

Leonel, 2011, Multiple random crack propagation using a boundary element formulation, Eng Fract Mech, 78, 1077, 10.1016/j.engfracmech.2010.11.012

Saouma, 1987, Mixed mode crack propagation in homogeneous anisotropic solids, Eng Fract Mech, 27, 171, 10.1016/0013-7944(87)90166-4

Ke, 2009, Modeling crack propagation path of anisotropic rocks using boundary element method, Int J Numer Anal Meth Geomech, 33, 1227, 10.1002/nag.764