Thermal management of electronic components based on hierarchical microchannels and nanofluids

Shi, 2021, Thermo-physical properties prediction of carbon-based magnetic nanofluids based on an artificial neural network, Renew. Sust. Energ. Rev., 149, 111341, 10.1016/j.rser.2021.111341 Li, 2020, Experimental study of temperature and mass fraction effects on thermal conductivity and dynamic viscosity of SiO2-oleic acid/liquid paraffin nanofluid, Int. Commun. Heat Mass Transf., 110, 104436, 10.1016/j.icheatmasstransfer.2019.104436 Qi, 2016, Study on the flow and heat transfer of liquid metal based nanofluid with different nanoparticle radiuses using two-phase lattice Boltzmann method, Int. J. Heat Mass Transf., 94, 316, 10.1016/j.ijheatmasstransfer.2015.11.068 Qi, 2017, Two-phase lattice Boltzmann simulation of the effects of base fluid and nanoparticle size on natural convection heat transfer of nanofluid, Int. J. Heat Mass Transf., 105, 664, 10.1016/j.ijheatmasstransfer.2016.10.043 Izadi, 2019, Natural convection of a magnetizable hybrid nanofluid inside a porous enclosure subjected to two variable magnetic fields, Int. J. Mech. Sci., 151, 154, 10.1016/j.ijmecsci.2018.11.019 Izadi, 2020, Natural convection of a hybrid nanofluid affected by an inclined periodic magnetic field within a porous medium, Chinese J. Phys., 65, 447, 10.1016/j.cjph.2020.03.006 Karimipour, 2016, Developing the laminar MHD forced convection flow of water/FMWNT carbon nanotubes in a microchannel imposed the uniform heat flux, J. Magn. Magn. Mater., 419, 420, 10.1016/j.jmmm.2016.06.063 Niknejadi, 2021, Experimental investigation of the hydrothermal aspects of water–Fe3O4 nanofluid inside a twisted tube, J. Therm. Anal. Calorim., 143, 801, 10.1007/s10973-020-09271-0 Li, 2020, Pool boiling heat transfer to CuO-H2O nanofluid on finned surfaces, Int. J. Heat Mass Transf., 156, 119780, 10.1016/j.ijheatmasstransfer.2020.119780 Hu, 2018, Effects of SiO2 nanoparticles on pool boiling heat transfer characteristics of water based nanofluids in a cylindrical vessel, Powder Technol., 327, 79, 10.1016/j.powtec.2017.12.046 Hussein, 2022, Natural convection in F-shaped cavity filled with Ag-water non-Newtonian nanofluid saturated with a porous medium and subjected to a horizontal periodic magnetic field, Korean J. Chem. Eng., 39, 887, 10.1007/s11814-021-1004-0 Barnoon, 2019, Two phase natural convection and thermal radiation of Non-Newtonian nanofluid in a porous cavity considering inclined cavity and size of inside cylinders, Int. Commun. Heat Mass Transf., 108, 104285, 10.1016/j.icheatmasstransfer.2019.104285 Yan, 2020, Inclined Lorentz force impact on convective-radiative heat exchange of micropolar nanofluid inside a porous enclosure with tilted elliptical heater, Int. Commun. Heat Mass Transf., 117, 104762, 10.1016/j.icheatmasstransfer.2020.104762 Mahian, 2017, Nanofluids effects on the evaporation rate in a solar still equipped with a heat exchanger, Nano Energy, 36, 134, 10.1016/j.nanoen.2017.04.025 Shahsavar, 2019, Impact of variable fluid properties on forced convection of Fe3O4/CNT/water hybrid nanofluid in a double-pipe mini-channel heat exchanger, J. Therm. Anal. Calorim., 137, 1031, 10.1007/s10973-018-07997-6 Bahiraei, 2022, Thermal-hydraulic performance of a nanofluid in a shell-and-tube heat exchanger equipped with new trapezoidal inclined baffles: Nanoparticle shape effect, Powder Technol., 395, 348, 10.1016/j.powtec.2021.09.009 Bahiraei, 2022, Two-phase simulation of irreversibilities for Ag-water nanofluid flow inside an elliptical pin-fin heat sink: entropy generation and exergy considerations, Powder Technol., 409, 117723, 10.1016/j.powtec.2022.117723 Sheikholeslami, 2022, Numerical investigation of solar system equipped with innovative turbulator and hybrid nanofluid, Sol. Energ. Mat. Solar C, 243, 111786, 10.1016/j.solmat.2022.111786 Sheikholeslami, 2022, Numerical analysis of solar energy storage within a double pipe utilizing nanoparticles for expedition of melting, Sol. Energ. Mat. Solar C, 245, 111856, 10.1016/j.solmat.2022.111856 Ding, 2021, Preparation and photothermal conversion performance of carbon-silica nanocomposite films for spectrally selective solar absorbers, Sol. Energ. Mat. Solar C, 233, 111391, 10.1016/j.solmat.2021.111391 Aghakhani, 2022, Experimental study of the effect of simultaneous application of the air-and water-cooled flow on efficiency in a Photovoltaic thermal solar collector with porous plates, Appl. Therm. Eng., 217, 119161, 10.1016/j.applthermaleng.2022.119161 Shang, 2022, The computational study of microchannel thickness effects on H2O/CuO nanofluid flow with molecular dynamics simulations, J. Mol. Liq., 345, 118240, 10.1016/j.molliq.2021.118240 Wang, 2022, Simulation of hybrid nanofluid flow within a microchannel heat sink considering porous media analyzing CPU stability, J. Pet. Sci. Eng., 208, 109734, 10.1016/j.petrol.2021.109734 Khosravi, 2021, Entropy generation of graphene–platinum hybrid nanofluid flow through a wavy cylindrical microchannel solar receiver by using neural networks, J. Therm. Anal. Calorim., 145, 1949, 10.1007/s10973-021-10828-w Jamshidmofid, 2022, Thermohydraulic assessment of a novel hybrid nanofluid containing cobalt oxide-decorated reduced graphene oxide nanocomposite in a microchannel heat sink with sinusoidal cavities and rectangular ribs, Int. Commun. Heat Mass Transf., 131, 105769, 10.1016/j.icheatmasstransfer.2021.105769 Vinoth, 2021, Flow and heat transfer behavior of hybrid nanofluid through microchannel with two different channels, Int. Commun. Heat Mass Transf., 123, 105194, 10.1016/j.icheatmasstransfer.2021.105194 Mohammadpour, 2022, Machine learning regression-CFD models for the nanofluid heat transfer of a microchannel heat sink with double synthetic jets, Int. Commun. Heat Mass Transf., 130, 105808, 10.1016/j.icheatmasstransfer.2021.105808 Ali, 2021, Numerical analysis on the thermal performance of microchannel heat sinks with Al2O3 nanofluid and various fins, Appl. Therm. Eng., 198, 117458, 10.1016/j.applthermaleng.2021.117458 Mohammadpour, 2021, Optimization of nanofluid heat transfer in a microchannel heat sink with multiple synthetic jets based on CFD-DPM and MLA, Int. J. Therm. Sci., 167, 107008, 10.1016/j.ijthermalsci.2021.107008 Farahani, 2021, Effect of PCM and porous media/nanofluid on the thermal efficiency of microchannel heat sinks, Int. Commun. Heat Mass Transf., 127, 105546, 10.1016/j.icheatmasstransfer.2021.105546 Heidarshenas, 2021, Experimental investigation of heat transfer enhancement using ionic liquid-Al2O3 hybrid nanofluid in a cylindrical microchannel heat sink, Appl. Therm. Eng., 191, 116879, 10.1016/j.applthermaleng.2021.116879 Jahanbakhshi, 2022, Cooling of a lithium-ion battery using microchannel heatsink with wavy microtubes in the presence of nanofluid, J. Energy Storage, 49, 104128, 10.1016/j.est.2022.104128 Liu, 2022, Efficacy of applying discontinuous boundary condition on the heat transfer and entropy generation through a slip microchannel equipped with nanofluid, Eng. Appl. Comp. Fluid Mech., 16, 952 Shamsuddin, 2021, Effects of surfactant and nanofluid on the performance and optimization of a microchannel heat sink, Int. J. Heat Mass Transf., 175, 121336, 10.1016/j.ijheatmasstransfer.2021.121336 Karimipour, 2021, Diminishing vortex intensity and improving heat transfer by applying magnetic field on an injectable slip microchannel containing FMWNT/water nanofluid, J. Therm. Anal. Calorim., 144, 2235, 10.1007/s10973-020-10261-5 Mohammadpour, 2022, Nanofluid heat transfer in a microchannel heat sink with multiple synthetic jets and protrusions, Int. J. Therm. Sci., 179, 107642, 10.1016/j.ijthermalsci.2022.107642 Shen, 2021, Molecular dynamics simulation of water-based Ferro-nanofluid flow in the microchannel and nanochannel: effects of number of layers and material of walls, J. Mol. Liq., 338, 116924, 10.1016/j.molliq.2021.116924 Sarvar-Ardeh, 2021, Hybrid nanofluids with temperature-dependent properties for use in double-layered microchannel heat sink; hydrothermal investigation, J. Taiwan Inst. Chem. E, 124, 53, 10.1016/j.jtice.2021.05.007 Ali, 2021, Thermo-hydraulic performance of a circular microchannel heat sink using swirl flow and nanofluid, Appl. Therm. Eng., 191, 116817, 10.1016/j.applthermaleng.2021.116817 Hasani, 2022, Two-phase mixture simulation of the performance of a grooved helical microchannel heat sink filled with biologically prepared water-silver nanofluid: Hydrothermal characteristics and irreversibility behavior, Appl. Therm. Eng., 202, 117848, 10.1016/j.applthermaleng.2021.117848 Wang, 2022, Effects of pin fins and vortex generators on thermal performance in a microchannel with Al2O3 nanofluids, Energy, 239, 122606, 10.1016/j.energy.2021.122606 Zhu, 2021, Computational study of rib shape and configuration for heat transfer and fluid flow characteristics of microchannel heat sinks with fan-shaped cavities, Appl. Therm. Eng., 195, 117171, 10.1016/j.applthermaleng.2021.117171 Pak, 1998, Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles, Exp. Heat Transf., 11, 151, 10.1080/08916159808946559 Hamilton, 1962, Thermal conductivity of heterogeneous two-component systems, Ind. Eng. Chem. Fundam., 1, 187, 10.1021/i160003a005 Brinkman, 1952, The viscosity of concentrated suspensions and solutions, J. Chem. Phys., 20, 571, 10.1063/1.1700493 Qi, 2017, Experimental and numerical research on the flow and heat transfer characteristics of TiO2-water nanofluids in a corrugated tube, Int. J. Heat Mass Transf., 115, 1072, 10.1016/j.ijheatmasstransfer.2017.08.098 Bahiraei, 2017, Efficacy of a novel liquid block working with a nanofluid containing graphene nanoplatelets decorated with silver nanoparticles compared with conventional CPU coolers, Appl. Therm. Eng., 127, 1233, 10.1016/j.applthermaleng.2017.08.136