Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review
Tóm tắt
Từ khóa
Tài liệu tham khảo
British Petroleum, 2016, BP statistical review of world, Energy
British Petroleum, 2016, BP Energy Outlook, 53, 2016
Wada, 2009, Research and development of electric vehicles for clean transportation, J Environ Sci, 21, 745, 10.1016/S1001-0742(08)62335-9
Andersen, 2009, Integrating private transport into renewable energy policy: the strategy of creating intelligent recharging grids for electric vehicles, Energy Policy, 37, 2481, 10.1016/j.enpol.2009.03.032
Westbrook MH, Engineers I of E, Engineers S of A. The electric car: development and future of battery, hybrid and fuel-cell cars. vol. 38; 2001.
Reddy, 2010
Aifantis, 2010
Budde-Meiwes, 2013, A review of current automotive battery technology and future prospects, Proc Inst Mech Eng Part D J Automob Eng, 227, 761, 10.1177/0954407013485567
Warner, 2015, 1
Conte, 2006, Battery and battery management for hybrid electric vehicles: a review, E I Elektrotechnik Und Informationstechnik, 123, 424, 10.1007/s00502-006-0383-6
Pesaran A, Santhanagopalan GK. Addressing the impact of temperature extremes on large format Li-ion batteries for vehicle applications. In: 30th int batter semin; 2013.
Motloch, 2002, High-power battery testing procedures and analytical methodologies for HEV’s, Futur Car Congr, 2002, 1
Sun, 2016, Toxicity, a serious concern of thermal runaway from commercial Li-ion battery, Nano Energy, 27, 313, 10.1016/j.nanoen.2016.06.031
Pesaran, 2002, Battery thermal models for hybrid vehicle simulations, J Power Sources, 110, 377, 10.1016/S0378-7753(02)00200-8
Dahlin GR, Strom KE. Lithium batteries: research, technology and applications; 2010.
Amatucci, 1996, CoO2, The end member of the LixCoO2 solid solution, J Electrochem Soc, 143, 1114, 10.1149/1.1836594
Nitta, 2015, Li-ion battery materials: present and future, Mater Today, 18, 252, 10.1016/j.mattod.2014.10.040
Sivakumar, 2015, Synthesis of surface modified LiFePO4 cathode material via polyol technique for high rate lithium secondary battery, Appl Surf Sci, 337, 234, 10.1016/j.apsusc.2015.02.100
Lee, 2013, Electrochemical enhancement of LiFePO4 as a cathode material by incorporating Cu flakes for lithium ion rechargeable battery, Solid State Ionics, 231, 18, 10.1016/j.ssi.2012.10.015
Shen, 2014, Low temperature process modified MCMB for lithium ion batteries, Solid State Ionics, 268, 282, 10.1016/j.ssi.2014.07.001
Zuo, 2017, Silicon based lithium-ion battery anodes: a chronicle perspective review, Nano Energy, 31, 113, 10.1016/j.nanoen.2016.11.013
Wang, 2016, A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles, Renew Sustain Energy Rev, 64, 106, 10.1016/j.rser.2016.05.033
Doughty, 2012, A general discussion of Li ion battery safety, Electrochem Soc Interface, 21, 37, 10.1149/2.F03122if
Younesi, 2015, Lithium salts for advanced lithium batteries: Li-metal, Li-O2, and Li-S, Energy Environ Sci, 8, 1905, 10.1039/C5EE01215E
Jiang, 2016, Core-shell-structured nanofibrous membrane as advanced separator for lithium-ion batteries, J Membr Sci, 510, 1, 10.1016/j.memsci.2016.02.067
Liu, 2016, Improvement of meltdown temperature of lithium-ion battery separator using electrospun polyethersulfone membranes, Polymer, 107, 163, 10.1016/j.polymer.2016.11.020
Panasonic Industrial devices. Lithium ion batteries; 2007. https://industrial.panasonic.com/cdbs/www-data/pdf/ACA4000/ACA4000PE3.pdf.
Wk057. Pics/Info: Inside the battery pack. Tesla Mot Club; 2014. https://teslamotorsclub.com/tmc/threads/pics-info-inside-the-battery-pack.34934/.
Messina C. Lithium-ion cylindrical cells vs. prismatic cells. Reli Batter; 2015. http://www.relionbattery.com/blog/lithium-cells-should-i-go-cylindrical-or-prismatic.
Roper LD. Tesla Model S; 2016. http://www.roperld.com/science/TeslaModelS.htm.
Tesla Model S. Wikipedia.org 2017. https://en.wikipedia.org/wiki/Tesla_Model_S#Battery.
Goodenough, 2013, The Li-ion rechargeable battery: a perspective, J Am Chem Soc, 135, 1167, 10.1021/ja3091438
Shim, 2002, Electrochemical analysis for cycle performance and capacity fading of a lithium-ion battery cycled at elevated temperature, J Power Sources, 112, 222, 10.1016/S0378-7753(02)00363-4
Sato, 2001, Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehicles, J Power Sources, 99, 70, 10.1016/S0378-7753(01)00478-5
Broussely, 2005, Main aging mechanisms in Li ion batteries, J Power Sources, 146, 90, 10.1016/j.jpowsour.2005.03.172
Ning, 2003, Capacity fade study of lithium-ion batteries cycled at high discharge rates, J Power Sources, 117, 160, 10.1016/S0378-7753(03)00029-6
MacNeil, 2002, A comparison of the electrode/electrolyte reaction at elevated temperatures for various Li-ion battery cathodes, J Power Sources, 108, 8, 10.1016/S0378-7753(01)01013-8
Huang, 2000, The limits of low-temperature performance of li-ion cells, J Electrochem Soc, 147, 2893, 10.1149/1.1393622
Lin, 2001, Low-temperature behavior of Li-ion cells, Electrochem Solid-State Lett, 4, A71, 10.1149/1.1368736
Nagpure, 2010, Thermal diffusivity study of aged Li-ion batteries using flash method, J Power Sources, 195, 872, 10.1016/j.jpowsour.2009.08.025
Belt, 2003, A capacity and power fade study of Li-ion cells during life cycle testing, J Power Sources, 123, 241, 10.1016/S0378-7753(03)00537-8
Nunotani, 2011, Development and performance evaluation of lithium iron phosphate battery with superior rapid charging performance—second report: evaluation of battery capacity loss characteristics, 1
Ramadass, 2002, Capacity fade of Sony 18,650 cells cycled at elevated temperatures: Part I. Cycling performance, J Power Sources, 112, 606, 10.1016/S0378-7753(02)00474-3
Wu, 2007, High-rate capability of lithium-ion batteries after storing at elevated temperature, Electrochim Acta, 52, 3719, 10.1016/j.electacta.2006.10.045
Jiang, 2015
Xiao, 2013, Atomic layer coating to mitigate capacity fading associated with manganese dissolution in lithium ion batteries, Electrochem Commun, 32, 31, 10.1016/j.elecom.2013.03.030
Zhou, 2016, Triphenyl phosphite as an electrolyte additive to improve the cyclic stability of lithium-rich layered oxide cathode for lithium-ion batteries, Electrochim Acta, 216, 44, 10.1016/j.electacta.2016.09.008
Shah, 2016, Experimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells, J Power Sources, 330, 167, 10.1016/j.jpowsour.2016.08.133
Feng, 2014, Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry, J Power Sources, 255, 294, 10.1016/j.jpowsour.2014.01.005
Peng, 2015, Thermal behavior analyses of stacked prismatic LiCoO2 lithium-ion batteries during oven tests, Int J Heat Mass Transf, 88, 411, 10.1016/j.ijheatmasstransfer.2015.04.101
Zhao, 2016, Simulation and experimental study on lithium ion battery short circuit, Appl Energy, 173, 29, 10.1016/j.apenergy.2016.04.016
Ye, 2016, Thermal behavior and failure mechanism of lithium ion cells during overcharge under adiabatic conditions, Appl Energy, 182, 464, 10.1016/j.apenergy.2016.08.124
Hatchard, 2014, Building a “smart nail” for penetration tests on Li-ion cells, J Power Sources, 247, 821, 10.1016/j.jpowsour.2013.09.022
Wang, 2017, Progressive mechanical indentation of large-format Li-ion cells, J Power Sources, 341, 156, 10.1016/j.jpowsour.2016.11.094
Wang, 2012, Thermal runaway caused fire and explosion of lithium ion battery, J Power Sources, 208, 210, 10.1016/j.jpowsour.2012.02.038
Bandhauer, 2011, A critical review of thermal issues in lithium-ion batteries, J Electrochem Soc, 158, R1, 10.1149/1.3515880
Spotnitz, 2003, Abuse behavior of high-power, lithium-ion cells, J Power Sources, 113, 81, 10.1016/S0378-7753(02)00488-3
Balakrishnan, 2006, Safety mechanisms in lithium-ion batteries, J Power Sources, 155, 401, 10.1016/j.jpowsour.2005.12.002
Ouyang, 2015, Overcharge-induced capacity fading analysis for large format lithium-ion batteries with LiyNi1/3Co1/3Mn1/3O2+LiyMn2O4 composite cathode, J Power Sources, 279, 626, 10.1016/j.jpowsour.2015.01.051
Yuan, 2015, Overcharge failure investigation of lithium-ion batteries, Electrochim Acta, 178, 682, 10.1016/j.electacta.2015.07.147
Chiu, 2014, Cycle life analysis of series connected lithium-ion batteries with temperature difference, J Power Sources, 263, 75, 10.1016/j.jpowsour.2014.04.034
Huang, 2006, Thermal study on single electrodes in lithium-ion battery, J Power Sources, 156, 541, 10.1016/j.jpowsour.2005.05.083
Park, 2003, Dynamic thermal model of Li-ion battery for predictive behavior in hybrid and fuel cell vehicles, SAE Int
Zhao, 2015, A review of thermal performance improving methods of lithium ion battery: electrode modification and thermal management system, J Power Sources, 299, 557, 10.1016/j.jpowsour.2015.09.001
Cosley, 2004, Battery thermal management system, 38
Mohammadian, 2015, Internal cooling of a lithium-ion battery using electrolyte as coolant through microchannels embedded inside the electrodes, J Power Sources, 293, 458, 10.1016/j.jpowsour.2015.05.055
Environmental Idaho National Engineering and Laboratory. FreedomCAR battery test manual for power-assist hybrid electric vehicles. Doe/Id-11069; 2003. doi:11069.
Fan, 2003, On the discharge capability and its limiting factors of commercial 18,650 Li-ion cell at low temperatures, J Power Sources, 117, 170, 10.1016/S0378-7753(03)00354-9
Nagasubramanian, 2001, Electrical characteristics of 18650 Li-ion cells at low temperatures, J Appl Electrochem, 31, 99, 10.1023/A:1004113825283
Jaguemont, 2016, A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures, Appl Energy, 164, 99, 10.1016/j.apenergy.2015.11.034
Senyshyn, 2015, Low-temperature performance of Li-ion batteries: the behavior of lithiated graphite, J Power Sources, 282, 235, 10.1016/j.jpowsour.2015.02.008
Zhang, 2003, The low temperature performance of Li-ion batteries, J Power Sources, 115, 137, 10.1016/S0378-7753(02)00618-3
Zhang, 2004, Electrochemical impedance study on the low temperature of Li-ion batteries, Electrochim Acta, 49, 1057, 10.1016/j.electacta.2003.10.016
Waldmann, 2014, Temperature dependent ageing mechanisms in Lithium-ion batteries – a Post-Mortem study, J Power Sources, 262, 129, 10.1016/j.jpowsour.2014.03.112
Pesaran, 2003, Cooling and preheating of batteries in hybrid electric vehicles, 1
Chen, 1996, Thermal analysis of lithium-ion batteries, J Electrochem Soc, 143, 2708, 10.1149/1.1837095
Chen, 2005, Thermal analysis of lithium-ion batteries, J Power Sources, 140, 111, 10.1016/j.jpowsour.2004.05.064
Holman, 2010
Xiao, 2013, Theoretical and experimental analysis of heat generations of a pouch type LiMn2O4/carbon high power Li-polymer battery, J Power Sources, 241, 46, 10.1016/j.jpowsour.2013.04.062
Ye, 2012, Electro-thermal modeling and experimental validation for lithium ion battery, J Power Sources, 199, 227, 10.1016/j.jpowsour.2011.10.027
Lai, 2015, Insight into heat generation of lithium ion batteries based on the electrochemical-thermal model at high discharge rates, Int J Hydrogen Energy, 40, 13039, 10.1016/j.ijhydene.2015.07.079
Zhang, 2011, Thermal analysis of a cylindrical lithium-ion battery, Electrochim Acta, 56, 1246, 10.1016/j.electacta.2010.10.054
Nyman, 2010, Analysis of the polarization in a Li-ion battery cell by numerical simulations, J Electrochem Soc, 157, A1236, 10.1149/1.3486161
Gu, 2000, Thermal-electrochemical modeling of battery systems, J Electrochem Soc, 147, 2910, 10.1149/1.1393625
Bernardi, 1985, A general energy balance for battery systems, J Electrochem Soc, 132, 5, 10.1149/1.2113792
Karimi, 2013, Thermal management of lithium-ion batteries for electric vehicles, Int J Energy Res, 37, 13, 10.1002/er.1956
Inui, 2007, Simulation of temperature distribution in cylindrical and prismatic lithium ion secondary batteries, Energy Convers Manag, 48, 2103, 10.1016/j.enconman.2006.12.012
Bergman, 2011
Fuller, 1994, Simulation and optimization of the dual lithium ion insertion cell, J Electrochem Soc, 141, 1, 10.1149/1.2054684
Doyle, 1993, Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell, J Electrochem Soc, 140, 1526, 10.1149/1.2221597
Doyle, 1996, Comparison of modeling predictions with experimental data from plastic lithium ion cells, J Electrochem Soc, 143, 1890, 10.1149/1.1836921
Abada, 2016, Safety focused modeling of lithium-ion batteries: a review, J Power Sources, 306, 178, 10.1016/j.jpowsour.2015.11.100
Subramanian, 2001, Approximate solutions for galvanostatic discharge of spherical particles I. Constant diffusion coefficient, J Electrochem Soc, 148, E444, 10.1149/1.1409397
Subramanian, 2004, A boundary condition for porous electrodes, Electrochem Solid-State Lett, 7, A259, 10.1149/1.1773751
Guo, 2011, Single-particle model for a lithium-ion cell: thermal behavior, J Electrochem Soc, 158, A122, 10.1149/1.3521314
Dubey, 2016, Ion cell performance using single particle representation of battery electrode, J Electroanal Chem, 768, 11, 10.1016/j.jelechem.2016.02.018
Santhanagopalan, 2006, Review of models for predicting the cycling performance of lithium ion batteries, J Power Sources, 156, 620, 10.1016/j.jpowsour.2005.05.070
Wang, 1998, Micro-macroscopic coupled modeling of batteries and fuel cells, J Electrochem Soc, 145, 3407, 10.1149/1.1838820
Jokar, 2016, Review of simplified pseudo-two-dimensional models of lithium-ion batteries, J Power Sources, 327, 44, 10.1016/j.jpowsour.2016.07.036
Di Domenico, 2008, Lithium-ion battery state of charge estimation with a Kalman Filter based on a electrochemical model, vol. 32, 702
Di Domenico, 2010, Lithium-ion battery state of charge and critical surface charge estimation using an electrochemical model-based extended Kalman filter, J Dyn Syst Meas Control, 132, 61302, 10.1115/1.4002475
Lin, 2016, Simplification and efficient simulation of electrochemical model for Li-ion battery in EVs, Energy Procedia, 104, 68, 10.1016/j.egypro.2016.12.013
Cai, 2009, Reduction of model order based on proper orthogonal decomposition for lithium-ion battery simulations, J Electrochem Soc, 156, A154, 10.1149/1.3049347
Luo, 2013, A new extension of physics-based single particle model for higher charge–discharge rates, J Power Sources, 241, 295, 10.1016/j.jpowsour.2013.04.129
Chen, 2014, Adaptive gain sliding mode observer for state of charge estimation based on combined battery equivalent circuit model, Comput Chem Eng, 64, 114, 10.1016/j.compchemeng.2014.02.015
Liaw, 2004, Modeling of lithium ion cells? A simple equivalent-circuit model approach, Solid State Ionics, 175, 835, 10.1016/j.ssi.2004.09.049
Seaman, 2014, A survey of mathematics-based equivalent-circuit and electrochemical battery models for hybrid and electric vehicle simulation, J Power Sources, 256, 410, 10.1016/j.jpowsour.2014.01.057
Greenleaf, 2014, Application of physical electric circuit modeling to characterize Li-ion battery electrochemical processes, J Power Sources, 270, 113, 10.1016/j.jpowsour.2014.07.083
Zhang, 2010, Comprehensive dynamic battery modeling for PHEV applications, 1
Andre, 2011, Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II: Modelling, J Power Sources, 196, 5349, 10.1016/j.jpowsour.2010.07.071
Chan, 2000, A new battery model for use with battery energy storage systems and electric vehicles power systems, 470
Chen, 2006, Accurate electrical battery model capable of predicting runtime and I-V performance, IEEE Trans Energy Convers, 21, 504, 10.1109/TEC.2006.874229
Rahimian, 2011, Comparison of single particle and equivalent circuit analog models for a lithium-ion cell, J Power Sources, 196, 8450, 10.1016/j.jpowsour.2011.06.007
Lam, 2011, A practical circuit-based model for Li-ion battery cells in electric vehicle applications, 1
Liaw, 2005, Modeling capacity fade in lithium-ion cells, J Power Sources, 140, 157, 10.1016/j.jpowsour.2004.08.017
Szumanowski, 2008, Battery management system based on battery nonlinear dynamics modeling, IEEE Trans Veh Technol, 57, 1425, 10.1109/TVT.2007.912176
Hu, 2012, A comparative study of equivalent circuit models for Li-ion batteries, J Power Sources, 198, 359, 10.1016/j.jpowsour.2011.10.013
Song, 2000, Electrochemical-thermal model of Lithium polymer batteries, J Electrochem Soc, 147, 2086, 10.1149/1.1393490
Smith, 2006, Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles, J Power Sources, 160, 662, 10.1016/j.jpowsour.2006.01.038
Prada, 2012, Simplified electrochemical and thermal model of LiFePO4-graphite Li-ion batteries for fast charge applications, J Electrochem Soc, 159, A1508, 10.1149/2.064209jes
Greco, 2016, A coupled thermal and electrochemical study of lithium-ion battery cooled by paraffin/porous-graphite-matrix composite, J Power Sources, 315, 127, 10.1016/j.jpowsour.2016.03.018
Basu, 2016, Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system, Appl Energy, 181, 1, 10.1016/j.apenergy.2016.08.049
Lin, 2014, A lumped-parameter electro-thermal model for cylindrical batteries, J Power Sources, 257, 1, 10.1016/j.jpowsour.2014.01.097
Saw, 2014, Electro-thermal characterization of Lithium Iron Phosphate cell with equivalent circuit modeling, Energy Convers Manag, 87, 367, 10.1016/j.enconman.2014.07.011
Bandhauer, 2013, Passive, internal thermal management system for batteries using microscale liquid-vapor phase change, Appl Therm Eng, 61, 756, 10.1016/j.applthermaleng.2013.08.004
Giuliano, 2011, Thermal analysis and management of lithium-titanate batteries, J Power Sources, 196, 6517, 10.1016/j.jpowsour.2011.03.099
Kelly, 2006, Battery usage and thermal performance of the Toyota Prius and Honda Insight during chassis dynamometer testing, 247
Kim G-H, Pesaran A. Battery thermal management system design modeling. In: 22nd int batter hybrid fuel cell electr veh conf exhib EVS22, vol. 1; 2006. p. 126–33.
Park, 2013, A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles, J Power Sources, 239, 30, 10.1016/j.jpowsour.2013.03.102
Sun, 2014, Development of cooling strategy for an air cooled lithium-ion battery pack, J Power Sources, 272, 404, 10.1016/j.jpowsour.2014.08.107
Mohammadian, 2015, Thermal management optimization of an air-cooled Li-ion battery module using pin-fin heat sinks for hybrid electric vehicles, J Power Sources, 273, 431, 10.1016/j.jpowsour.2014.09.110
Mohammadian, 2015, Thermal management improvement of an air-cooled high-power lithium-ion battery by embedding metal foam, J Power Sources, 296, 305, 10.1016/j.jpowsour.2015.07.056
Mohammadian, 2017, Cumulative effects of using pin fin heat sink and porous metal foam on thermal management of lithium-ion batteries, Appl Therm Eng, 118, 375, 10.1016/j.applthermaleng.2017.02.121
Yu, 2014, Thermal analysis and two-directional air flow thermal management for lithium-ion battery pack, J Power Sources, 270, 193, 10.1016/j.jpowsour.2014.07.086
Wang, 2014, Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies, Appl Energy, 134, 229, 10.1016/j.apenergy.2014.08.013
Fathabadi, 2014, A novel design including cooling media for Lithium-ion batteries pack used in hybrid and electric vehicles, J Power Sources, 245, 495, 10.1016/j.jpowsour.2013.06.160
Fan, 2013, A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles, J Power Sources, 238, 301, 10.1016/j.jpowsour.2013.03.050
Yang, 2015, Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: a comparative analysis between aligned and staggered cell arrangements, Appl Therm Eng, 80, 55, 10.1016/j.applthermaleng.2015.01.049
Tong, 2016, Thermo-electrochemical model for forced convection air cooling of a lithium-ion battery module, Appl Therm Eng, 99, 672, 10.1016/j.applthermaleng.2016.01.050
Yang, 2016, Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack, Int J Therm Sci, 108, 132, 10.1016/j.ijthermalsci.2016.05.009
Saw, 2016, Computational fluid dynamic and thermal analysis of lithium-ion battery pack with air cooling, Appl Energy, 177, 783, 10.1016/j.apenergy.2016.05.122
Zhu, 2013, Development of a theoretically based thermal model for lithium ion battery pack, J Power Sources, 223, 155, 10.1016/j.jpowsour.2012.09.035
Wang, 2015, Development of efficient air-cooling strategies for lithium-ion battery module based on empirical heat source model, Appl Therm Eng, 90, 521, 10.1016/j.applthermaleng.2015.07.033
Chen, 2016, Comparison of different cooling methods for lithium ion battery cells, Appl Therm Eng, 94, 846, 10.1016/j.applthermaleng.2015.10.015
Lan, 2016, Thermal management for high power lithium-ion battery by minichannel aluminum tubes, Appl Therm Eng, 101, 284, 10.1016/j.applthermaleng.2016.02.070
Zhang, 2017, Investigation on the promotion of temperature uniformity for the designed battery pack with liquid flow in cooling process, Appl Therm Eng, 116, 655, 10.1016/j.applthermaleng.2017.01.069
Tong, 2015, Numerical investigation of water cooling for a lithium-ion bipolar battery pack, Int J Therm Sci, 94, 259, 10.1016/j.ijthermalsci.2015.03.005
Huo, 2015, Investigation of power battery thermal management by using mini-channel cold plate, Energy Convers Manag, 89, 387, 10.1016/j.enconman.2014.10.015
Qian, 2016, Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling, Energy Convers Manag, 126, 622, 10.1016/j.enconman.2016.08.063
Jin, 2014, Ultra-thin minichannel LCP for EV battery thermal management, Appl Energy, 113, 1786, 10.1016/j.apenergy.2013.07.013
Jarrett, 2011, Design optimization of electric vehicle battery cooling plates for thermal performance, J Power Sources, 196, 10359, 10.1016/j.jpowsour.2011.06.090
Jarrett, 2014, Influence of operating conditions on the optimum design of electric vehicle battery cooling plates, J Power Sources, 245, 644, 10.1016/j.jpowsour.2013.06.114
Zhao, 2015, Thermal performance of mini-channel liquid cooled cylinder based battery thermal management for cylindrical lithium-ion power battery, Energy Convers Manag, 103, 157, 10.1016/j.enconman.2015.06.056
Huo, 2015, The numerical investigation of nanofluid based cylinder battery thermal management using lattice Boltzmann method, Int J Heat Mass Transf, 91, 374, 10.1016/j.ijheatmasstransfer.2015.07.128
Yang, 2016, Thermal management of Li-ion battery with liquid metal, Energy Convers Manag, 117, 577, 10.1016/j.enconman.2016.03.054
Zhao, 2014, An experimental study of lithium ion battery thermal management using flexible hydrogel films, J Power Sources, 255, 29, 10.1016/j.jpowsour.2013.12.138
Zhang, 2014, Investigation on a hydrogel based passive thermal management system for lithium ion batteries, Energy, 68, 854, 10.1016/j.energy.2014.03.012
Adams DT, Berdichevsky G, Colson TE, Hebert A, Kohn S, Lyons D, et al. Battery pack thermal management system. US Patent 20090023056, vol. A1; 2009.
Van Gils, 2014, Battery thermal management by boiling heat-transfer, Energy Convers Manag, 79, 9, 10.1016/j.enconman.2013.12.006
Hirano, 2014, Boiling liquid battery cooling for electric vehicle, 1
An, 2017, Experimental investigation on lithium-ion battery thermal management based on flow boiling in mini-channel, Appl Therm Eng, 117, 534, 10.1016/j.applthermaleng.2017.02.053
Manimaran, 2011, Factors affecting the thermal performance of heat pipe – a review, Therm Eng, 37A, 4143
Krishna, 2017, Heat pipe with nano enhanced-PCM for electronic cooling application, Exp Therm Fluid Sci, 81, 84, 10.1016/j.expthermflusci.2016.10.014
Shukla, 2015, Heat pipe for aerospace applications—an overview, J Electron Cool Therm Control, 5, 1, 10.4236/jectc.2015.51001
Pise, 2016, Investigation of solar heat pipe collector using nanofluid and surfactant, Energy Procedia, 90, 481, 10.1016/j.egypro.2016.11.215
Wang, 2017, Performance analysis of heat pipe radiator unit for space nuclear power reactor, Ann Nucl Energy, 103, 74, 10.1016/j.anucene.2017.01.015
Rao, 2013, Experimental investigation on thermal management of electric vehicle battery with heat pipe, Energy Convers Manag, 65, 92, 10.1016/j.enconman.2012.08.014
Fasula, 2009
Burban, 2013, Experimental investigation of a pulsating heat pipe for hybrid vehicle applications, Appl Therm Eng, 50, 94, 10.1016/j.applthermaleng.2012.05.037
Rao, 2014, Experimental study of an OHP-cooled thermal management system for electric vehicle power battery, Exp Therm Fluid Sci, 57, 20, 10.1016/j.expthermflusci.2014.03.017
Putra, 2016, Experimental investigation on performance of lithium-ion battery thermal management system using flat plate loop heat pipe for electric vehicle application, Appl Therm Eng, 99, 784, 10.1016/j.applthermaleng.2016.01.123
Zhao, 2015, An experimental study of heat pipe thermal management system with wet cooling method for lithium ion batteries, J Power Sources, 273, 1089, 10.1016/j.jpowsour.2014.10.007
Ye, 2016, Performance assessment and optimization of a heat pipe thermal management system for fast charging lithium ion battery packs, Int J Heat Mass Transf, 92, 893, 10.1016/j.ijheatmasstransfer.2015.09.052
Tran, 2014, Experimental investigation on heat pipe cooling for hybrid electric vehicle and electric vehicle lithium-ion battery, J Power Sources, 265, 262, 10.1016/j.jpowsour.2014.04.130
Tran, 2014, Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery, Appl Therm Eng, 63, 551, 10.1016/j.applthermaleng.2013.11.048
Wang, 2015, Experimental investigation on EV battery cooling and heating by heat pipes, Appl Therm Eng, 88, 54, 10.1016/j.applthermaleng.2014.09.083
Greco, 2014, A theoretical and computational study of lithium-ion battery thermal management for electric vehicles using heat pipes, J Power Sources, 257, 344, 10.1016/j.jpowsour.2014.02.004
Ye, 2015, Numerical analyses on optimizing a heat pipe thermal management system for lithium-ion batteries during fast charging, Appl Therm Eng, 86, 281, 10.1016/j.applthermaleng.2015.04.066
Rao, 2011, A review of power battery thermal energy management, Renew Sustain Energy Rev, 15, 4554, 10.1016/j.rser.2011.07.096
Yan, 2016, Numerical study on the thermal performance of a composite board in battery thermal management system, Appl Therm Eng, 106, 131, 10.1016/j.applthermaleng.2016.05.187
Quanying, 2008, Experimental study on the thermal storage performance and preparation of paraffin mixtures used in the phase change wall, Sol Energy Mater Sol Cells, 92, 1526, 10.1016/j.solmat.2008.07.002
Karimi, 2016, Experimental study of a cylindrical lithium ion battery thermal management using phase change material composites, J Energy Storage, 10.1016/j.est.2016.08.005
Samimi, 2016, Thermal management analysis of a Li-ion battery cell using phase change material loaded with carbon fibers, Energy, 96, 355, 10.1016/j.energy.2015.12.064
Babapoor, 2015, Thermal management of a Li-ion battery using carbon fiber-PCM composites, Appl Therm Eng, 82, 281, 10.1016/j.applthermaleng.2015.02.068
Malik, 2016, Review on use of phase change materials in battery thermal management for electric and hybrid electric vehicles, Int J Energy Res, 40, 1011, 10.1002/er.3496
Goli, 2014, Graphene-enhanced hybrid phase change materials for thermal management of Li-ion batteries, J Power Sources, 248, 37, 10.1016/j.jpowsour.2013.08.135
Shirazi, 2016, Paraffin nanocomposites for heat management of lithium-ion batteries: a computational investigation, J Nanomater, 2016, 1, 10.1155/2016/2131946
Javani, 2014, Modeling of passive thermal management for electric vehicle battery packs with PCM between cells, Appl Therm Eng, 73, 305, 10.1016/j.applthermaleng.2014.07.037
Wang, 2015, Paraffin and paraffin/aluminum foam composite phase change material heat storage experimental study based on thermal management of Li-ion battery, Appl Therm Eng, 78, 428, 10.1016/j.applthermaleng.2015.01.009
Alipanah, 2016, Numerical studies of lithium-ion battery thermal management systems using phase change materials and metal foams, Int J Heat Mass Transf, 102, 1159, 10.1016/j.ijheatmasstransfer.2016.07.010
Li, 2014, Experimental study of a passive thermal management system for high-powered lithium ion batteries using porous metal foam saturated with phase change materials, J Power Sources, 255, 9, 10.1016/j.jpowsour.2014.01.006
Qu, 2014, Numerical model of the passive thermal management system for high-power lithium ion battery by using porous metal foam saturated with phase change material, Int J Hydrogen Energy, 39, 3904, 10.1016/j.ijhydene.2013.12.136
Hussain, 2016, Experimental investigation of a passive thermal management system for high-powered lithium ion batteries using nickel foam-paraffin composite, Energy, 115, 209, 10.1016/j.energy.2016.09.008
Jiang, 2016, Thermal optimization of composite phase change material/expanded graphite for Li-ion battery thermal management, Appl Therm Eng, 108, 1119, 10.1016/j.applthermaleng.2016.07.197
Ling, 2014, Experimental and numerical investigation of the application of phase change materials in a simulative power batteries thermal management system, Appl Energy, 121, 104, 10.1016/j.apenergy.2014.01.075
Yan, 2016, Experimental study on the application of phase change material in the dynamic cycling of battery pack system, Energy Convers Manag, 128, 12, 10.1016/j.enconman.2016.09.058
Lv, 2016, Experimental study on a novel battery thermal management technology based on low density polyethylene-enhanced composite phase change materials coupled with low fins, Appl Energy, 178, 376, 10.1016/j.apenergy.2016.06.058
Wu, 2016, An experimental study of thermal management system using copper mesh-enhanced composite phase change materials for power battery pack, Energy, 113, 909, 10.1016/j.energy.2016.07.119
Azizi, 2016, Thermal management of a LiFePO4 battery pack at high temperature environment using a composite of phase change materials and aluminum wire mesh plates, Energy Convers Manag, 128, 294, 10.1016/j.enconman.2016.09.081
Lin, 2015, Experiment and simulation of a LiFePO4 battery pack with a passive thermal management system using composite phase change material and graphite sheets, J Power Sources, 275, 742, 10.1016/j.jpowsour.2014.11.068
Balandin, 2011, Thermal properties of graphene and nanostructured carbon materials, Nat Mater, 10, 569, 10.1038/nmat3064
Wu, 2017, Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system, Energy Convers Manag, 138, 486, 10.1016/j.enconman.2017.02.022
Ling, 2015, A hybrid thermal management system for lithium ion batteries combining phase change materials with forced-air cooling, Appl Energy, 148, 403, 10.1016/j.apenergy.2015.03.080
Hémery, 2014, Experimental performances of a battery thermal management system using a phase change material, J Power Sources, 270, 349, 10.1016/j.jpowsour.2014.07.147
Rao, 2016, Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system, Appl Energy, 164, 659, 10.1016/j.apenergy.2015.12.021
Zhao, 2017, Experimental study on the thermal management performance of phase change material coupled with heat pipe for cylindrical power battery pack, Exp Therm Fluid Sci, 82, 182, 10.1016/j.expthermflusci.2016.11.017
Wang, 2016, Thermal performance of phase change material/oscillating heat pipe-based battery thermal management system, Int J Therm Sci, 102, 9, 10.1016/j.ijthermalsci.2015.11.005
Zhao, 2016, Experiment study of oscillating heat pipe and phase change materials coupled for thermal energy storage and thermal management, Int J Heat Mass Transf, 99, 252, 10.1016/j.ijheatmasstransfer.2016.03.108
Vlahinos A, Pesaran AA. Energy efficient battery heating in cold climates. SAE tech. pap., vol. 2002-01-19; 2002. http://dx.doi.org/10.4271/2002-01-1975.
Ji, 2013, Heating strategies for Li-ion batteries operated from subzero temperatures, Electrochim Acta, 10.1016/j.electacta.2013.03.147
Stuart, 2004, HEV battery heating using AC currents, J Power Sources, 10.1016/j.jpowsour.2003.10.014
Zhu, 2016, An alternating current heating method for lithium-ion batteries from subzero temperatures, Int J Energy Res, 40, 1869, 10.1002/er.3576
Wang, 2016, Lithium-ion battery structure that self-heats at low temperatures, Nature, 529, 515, 10.1038/nature16502
Zhang, 2016, Rapid self-heating and internal temperature sensing of lithium-ion batteries at low temperatures, Electrochim Acta, 218, 149, 10.1016/j.electacta.2016.09.117
Al Hallaj, 2000, A novel thermal management system for electric vehicle batteries using phase-change material, J Electrochem Soc, 147, 3231, 10.1149/1.1393888