Thermal improvement of linear Fresnel solar system utilizing Al2O3-water nanofluid and multi-way twisted tape

Al Moussawi, 2017, Selection based on differences between cogeneration and trigeneration in various prime mover technologies, Renew. Sustain. Energy Rev., 74, 491, 10.1016/j.rser.2017.02.077

Murugan, 2016, Tri and polygeneration systems-A review, Renew. Sustain. Energy Rev., 60, 1032, 10.1016/j.rser.2016.01.127

Rong, 2017, Polygeneration systems in buildings: a survey on optimization approaches, Energy Build., 151, 439, 10.1016/j.enbuild.2017.06.077

Nathan, 2018, Solar thermal hybrids for combustion power plant: a growing opportunity, Prog. Energy Combust. Sci., 64, 4, 10.1016/j.pecs.2017.08.002

Kalogirou, 2016, Exergy analysis of solar thermal collectors and processes, Prog. Energy Combust. Sci., 56, 106, 10.1016/j.pecs.2016.05.002

Wu, 2006, Combined cooling, heating and power: a review, Prog. Energy Combust. Sci., 32, 459, 10.1016/j.pecs.2006.02.001

Morin, 2012, Comparison of linear fresnel and parabolic trough collector power plants, Sol. Energy, 86, 1, 10.1016/j.solener.2011.06.020

Bellos, 2018, Assessment of linear solar concentrating technologies for Greek climate, Energy Convers. Manag., 171, 1502, 10.1016/j.enconman.2018.06.076

Zhu, 2014, History, current state, and future of linear Fresnel concentrating solar collectors, Sol. Energy, 103, 639, 10.1016/j.solener.2013.05.021

Sundar, 2020, Efficiency, energy and economic analysis of twisted tape inserts in a thermosyphon solar flat plate collector with Cu nanofluids, Renew. Energy Focus, 35, 10, 10.1016/j.ref.2020.06.004

Choi, 1995

Godson, 2010, Enhancement of heat transfer using nanofluids—an overview, Renew. Sustain. Energy Rev., 14, 629, 10.1016/j.rser.2009.10.004

Li, 2020, Transient pool boiling and particulate deposition of copper oxide nano-suspensions, Int. J. Heat Mass Tran., 155, 119743, 10.1016/j.ijheatmasstransfer.2020.119743

Paul, 2010, Techniques for measuring the thermal conductivity of nanofluids: a review, Renew. Sustain. Energy Rev., 14, 1913, 10.1016/j.rser.2010.03.017

Trisaksri, 2007, Critical review of heat transfer characteristics of nanofluids, Renew. Sustain. Energy Rev., 11, 512, 10.1016/j.rser.2005.01.010

Eastman, 1996

Raja, 2016, Review on nanofluids characterization, heat transfer characteristics and applications, Renew. Sustain. Energy Rev., 64, 163, 10.1016/j.rser.2016.05.079

Gupte, 1995, Role of micro-convection due to non-affine motion of particles in a mono-disperse suspension, Int. J. Heat Mass Tran., 38, 2945, 10.1016/0017-9310(95)00060-M

Srinivas, 2016, Nanofluids with CNTs for automotive applications, Heat Mass Tran., 52, 701, 10.1007/s00231-015-1588-1

Li, 2020, Pool boiling heat transfer to CuO-H2O nanofluid on finned surfaces, Int. J. Heat Mass Tran., 156, 119780, 10.1016/j.ijheatmasstransfer.2020.119780

Cheng, 2018, A novel optical optimization model for linear Fresnel reflector concentrators, Renew. Energy, 129, 486, 10.1016/j.renene.2018.06.019

Liu, 2014, Thermodynamic and optical analysis for a CPV/T hybrid system with beam splitter and fully tracked linear Fresnel reflector concentrator utilizing sloped panels, Sol. Energy, 103, 191, 10.1016/j.solener.2014.01.047

Zhu, 2017, Design and thermal performances of a scalable linear Fresnel reflector solar system, Energy Convers. Manag., 146, 174, 10.1016/j.enconman.2017.05.031

Barbón, 2020, Influence of solar tracking error on the performance of a small-scale linear Fresnel reflector, Renew. Energy, 162, 43, 10.1016/j.renene.2020.07.132

Khandelwal, 2021, Comparative analysis of the linear Fresnel reflector assisted solar cycle on the basis of heat transfer fluids, Mater. Today Proc., 38, 74, 10.1016/j.matpr.2020.05.792

Hachicha, 2020, On the thermal and thermodynamic analysis of parabolic trough collector technology using industrial-grade MWCNT based nanofluid, Renew. Energy, 161, 1303, 10.1016/j.renene.2020.07.096

Abubakr, 2020, An intuitive framework for optimizing energetic and exergetic performances of parabolic trough solar collectors operating with nanofluids, Renew. Energy, 157, 130, 10.1016/j.renene.2020.04.160

Bellos, 2018, Thermal, hydraulic and exergetic evaluation of a parabolic trough collector operating with thermal oil and molten salt based nanofluids, Energy Convers. Manag., 156, 388, 10.1016/j.enconman.2017.11.051

Bretado de los Rios, 2018, Thermal performance of a parabolic trough linear collector using Al2O3/H2O nanofluids, Renew. Energy, 122, 665, 10.1016/j.renene.2018.01.094

Azmi, 2014, Comparison of convective heat transfer coefficient and friction factor of TiO2 nanofluid flow in a tube with twisted tape inserts, Int. J. Therm. Sci., 81, 84, 10.1016/j.ijthermalsci.2014.03.002

Piriyarungrod, 2018, Intensification of thermo-hydraulic performance in heat exchanger tube inserted with multiple twisted-tapes, Appl. Therm. Eng., 136, 516, 10.1016/j.applthermaleng.2018.02.097

Naik, 2014, Comparative study on thermal performance of twisted tape and wire coil inserts in turbulent flow using CuO/water nanofluid, Exp. Therm. Fluid Sci., 57, 65, 10.1016/j.expthermflusci.2014.04.006

Eiamsa-ard, 2012, Single-phase heat transfer of CuO/water nanofluids in micro-fin tube equipped with dual twisted-tapes, Int. Commun. Heat Mass Tran., 39, 1453, 10.1016/j.icheatmasstransfer.2012.08.007

Singh, 2010, Thermal performance of linear Fresnel reflecting solar concentrator with trapezoidal cavity absorbers, Appl. Energy, 87, 541, 10.1016/j.apenergy.2009.08.019

Negi, 1989, Optical and thermal performance evaluation of a linear fresnel reflector solar concentrator, Sol. Wind Technol., 6, 589, 10.1016/0741-983X(89)90095-7

Singh, 1999, Technical note: performance study of a linear Fresnel concentrating solar device, Renew. Energy, 18, 409, 10.1016/S0960-1481(98)00805-2

Modest, 2013

ANSYS® Academic Research, Release 18.1, ANSYS FLUENT, Theory Guide, ANSYS, Inc.

Versteeg, 2007

Flows-model, 1994

Koo, 2005, Laminar nanofluid flow in microheat-sinks, Int. J. Heat Mass Tran., 48, 2652, 10.1016/j.ijheatmasstransfer.2005.01.029

Pak, 1998, Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particle, Exp. Heat Tran., 11, 151, 10.1080/08916159808946559

Koo, 2004, Viscous dissipation effects in micro tubes and micro channels, Int. J. Heat Mass Tran., 47, 3159, 10.1016/j.ijheatmasstransfer.2004.02.017

Koo, 2004

Prasher, 2005, Thermal conductivity of nano scale colloidal solution, Phys. Rev. Lett., 94, 10.1103/PhysRevLett.94.025901

Jang, 2004, The role of Brownian motion in the enhanced thermal conductivity of nanofluids, Appl. Phys. Lett., 84, 4316, 10.1063/1.1756684

J. Li, Computational analysis of nanofluid flow in micro channels with applications to micro-heat sinks and bio-MEMS, PhD Thesis NC State University, Raleigh, NC, the United States; 2008.

Manglik, 1993, Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes: Part II—transition and turbulent flows, J. Heat Tran., 115, 890, 10.1115/1.2911384

Mathur, 1991, Optical design and concentration characteristics of linear Fresnel reflector solar concentrators—II. Mirror elements of equal width, Energy Convers. Manag., 31, 221, 10.1016/0196-8904(91)90076-U

Kim, 2009, Convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions, Curr. Appl. Phys., 9, 119, 10.1016/j.cap.2008.12.047

Jafaryar, 2019

Duffie, 2013, Optical performance of concentrating collectors