Thermal energy storage with phase change material—A state-of-the art review
Tóm tắt
Từ khóa
Tài liệu tham khảo
Agyenim, 2008, Experimental investigation of PCMs for the hot side of a vapour compression heat pump to adjust tariff rates
Agyenim, 2010, The development of a finned phase change material (PCM) storage system to take advantage of off-peak electricity tariff for improvement in cost of heat pump operation, Energy and Buildings, 42, 1552, 10.1016/j.enbuild.2010.03.027
Agyenim, 2009, A comparison of heat transfer enhancement in a medium thermal energy storage heat exchanger suing fins, Solar Energy, 83, 1509, 10.1016/j.solener.2009.04.007
Agyenim, 2010, Design and experimental testing of the performance of an outdoor LiBr/H2O solar thermal absorption cooling system with a cold store, Solar Energy, 84, 735, 10.1016/j.solener.2010.01.013
Agyenim, 2010, A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS), Renewable and Sustainable Energy Reviews, 14, 615, 10.1016/j.rser.2009.10.015
Akgun, 2008, Thermal energy performance of a paraffin in a novel tube-in-shell system, Applied Thermal Engineering, 28, 405, 10.1016/j.applthermaleng.2007.05.013
Al-Hinti, 2010, Experimental investigation on the use of water-phase change material storage in conventional solar water heating systems, Energy Conversion and Management, 51, 1735, 10.1016/j.enconman.2009.08.038
Alkilani, 2009, Output air temperature predication in a solar air heater integrated with phase change material, European Journal of Scientific Research, 27, 334
Anderson, 2009, Performance of a building integrated photovoltaic/thermal (BIPVT) solar collector, Solar Energy, 83, 445, 10.1016/j.solener.2008.08.013
ASHRAE, 1991, 48
Banaszek, 2000, Numerical analysis of the paraffin wax-air spiral thermal energy storage unit, Applied Thermal Engineering, 49, 323, 10.1016/S1359-4311(99)00028-9
Barba, 2003, Discharge mode for encapsulated PCMs in storage tanks, Solar Energy, 74, 141, 10.1016/S0038-092X(03)00117-8
Bedecarrats, 1996, Dumas phase-change thermal energy storage using spherical capsules. Performance of a test plant, International Journal of Refrigeration, 19, 187, 10.1016/0140-7007(95)00080-1
Belusko, 2001, Experimental study of a roof integrated solar collector in a solar heating system
Bony, 2007, Numerical model and experimental validation of heat storage with phase change materials, Energy and Buildings, 39, 1065, 10.1016/j.enbuild.2006.10.017
Bourke, 2012, New test method for gas boosters with domestic solar water heaters, Solar Energy, 86, 78, 10.1016/j.solener.2011.09.004
Cabeza, 2002, Immersion corrosion tests on metal-salt hydrate pairs for latent heat storage in the 48 to 58°C temperature range, Materials and Corrosion, 52, 902, 10.1002/maco.200290004
Cabeza, 2005, An approach to the simulation of PCMs in building applications using TRNSYS, Applied Thermal Engineering, 25, 1796, 10.1016/j.applthermaleng.2004.11.001
Cabeza, 2006, Modelization of a water tank including a PCM module, Applied Thermal Engineering, 26, 1328, 10.1016/j.applthermaleng.2005.10.022
Cabeza, 2006, Experimentation with a water tank including a PCM module, Solar Energy Materials and Solar Cells, 90, 1273, 10.1016/j.solmat.2005.08.002
Cabeza, 2008, Natural convection heat transfer coefficients in phase change material (PCM) modules with external vertical fins, Applied Thermal Engineering, 28, 1676, 10.1016/j.applthermaleng.2007.11.004
Cabeza, 2008, Energetic and exergetic analysis of a domestic water tank with phase change material, International Journal of Energy Research, 32, 204, 10.1002/er.1341
Cabeza, 2011, Materials used as PCM in thermal energy storage in buildings: A review, Renewable and Sustainable Energy Reviews, 15, 1675, 10.1016/j.rser.2010.11.018
Canbazoglu, 2005, Enhancement of solar thermal energy storage performance using sodium thiosulfate pentahydrate of a conventional solar water heating system, Energy and Buildings, 37, 235, 10.1016/j.enbuild.2004.06.016
Cassedy, 2000
Dall’O’, 2012, A methodology for evaluating the potential energy savings of retrofitting residential building stocks, Sustainable Cities and Society, 4, 12, 10.1016/j.scs.2012.01.004
De Gracia, 2011, Thermal analysis of including phase change material in a domestic hot water cylinder, Applied Thermal Engineering, 31, 3938, 10.1016/j.applthermaleng.2011.07.043
Delisle, 2007, Model of a PV/thermal unglazed transpired solar collector, 10
Dermott, 1979, Storage assisted air-conditioning using a new low-cost PCM packaging concept
Dincer, 2003, Exergy–cost–energy–mass analysis of thermal systems and processes, Energy Conversion and Management, 44, 1633, 10.1016/S0196-8904(02)00179-6
Domanski, 1994, Experimental study for the melting of PCM inside concentric horizontal cylindrical annuli, 503
El-Dessouky, 1997, Effectiveness of a thermal energy storage system using phase-change materials, Energy Conversion and Management, 38, 601, 10.1016/S0196-8904(96)00072-6
El-Sawi, 2013, Centralized latent heat thermal energy storage system: Model development and validation, Energy and Buildings, 10.1016/j.enbuild.2013.05.027
Enibe, 2002, Performance of a natural circulation solar air heating system with phase change material energy storage, Renewable Energy, 27, 69, 10.1016/S0960-1481(01)00173-2
Enibe, 2003, Thermal analysis of a natural circulation solar air heater with phase change material energy storage, Renewable Energy, 28, 2269, 10.1016/S0960-1481(03)00071-5
Esen, 1998, Geometric design of solar-aided latent heat store depending on various parameters and phase change materials, Solar Energy, 62, 19, 10.1016/S0038-092X(97)00104-7
Farid, 2004, A review on phase change energy storage. Materials and Applications, Energy Conversation and Management, 45, 1597, 10.1016/j.enconman.2003.09.015
Farid, 1989, Performance of direct contact latent heat storage unit, Solar Energy, 43, 237, 10.1016/0038-092X(89)90023-6
Farrell, 2006, Corrosive effects of salt hydrate phase change materials used with aluminium and copper, Journal of Materials Processing Technology, 175, 198, 10.1016/j.jmatprotec.2005.04.058
Fatah, 1994, Thermal performance of a simple design solar air heater with built in thermal energy storage systems, Energy Conversion and Management, 36, 989, 10.1016/0196-8904(94)00069-C
Fath, 1991, Heat exchanger performance for latent heat thermal energy storage system, Energy Conversion and Management, 31, 149, 10.1016/0196-8904(91)90067-S
Fuqiao, 2002, A review of research concerning the use of PCMS in air conditioning and refrigeration engineering, Advances in Building Technology, 1273
Goyal, 1998, Effect of thermal storage on the performance of an air collector; a periodic analysis, Energy Conversion and Management, 39, 193, 10.1016/S0196-8904(96)00226-9
Gu, 2013, Impact of urban residences on energy consumption and carbon emissions: An investigation in Nanjing, China, Sustainable Cities and Society, 7, 52, 10.1016/j.scs.2012.11.004
Haghighat, 2011, Impact of non-uniform urban surface temperature on pollution dispersion in urban areas, Building Simulation, 4, 227, 10.1007/s12273-011-0035-6
Hajat, 2002, Impact of hot temperatures on death in London: A time series approach, Journal of Epidemiology and Community Health, 56, 367, 10.1136/jech.56.5.367
Halawa, 2007, Numerical analysis of a PCM thermal storage system with varying wall temperature, Energy Conversion and Management, 46, 2592, 10.1016/j.enconman.2004.11.003
Hale, 1978, Photographic observation of the solid-liquid interface motion during melting of a solid heated from an isothermal vertical wall, Letters in Heat and Mass Transfer, 5, 329, 10.1016/0094-4548(78)90041-3
Hale, 1980, Solid-liquid phase change heat transfer and interface motion in materials cooled or heated from above or below, International Journal of Heat and Mass Transfer, 23, 283, 10.1016/0017-9310(80)90116-7
Hasnain, 1998, Review on sustainable thermal energy storage technologies. Part I. Heat storage materials and techniques, Energy Conversion and Management, 39
Hasnain, 1998, Review on sustainable thermal energy storage technologies. Part II: Cool thermal storage, Energy Conversion and Management, 39, 1139, 10.1016/S0196-8904(98)00024-7
Hayhoe, 2010, Climate change, heat waves, and mortality projections for Chicago, Journal of Great Lakes Research, 36, 65, 10.1016/j.jglr.2009.12.009
Hüseyin, 2005, Experimental evaluation of energy and exergy efficiency of a seasonal latent heat storage system for greenhouse heating, Energy Conversion and Management, 46, 1523, 10.1016/j.enconman.2004.07.001
Hüseyin, 2009, Performance analysis of a latent heat storage system with phase change material for new designed solar collectors in greenhouse heating, Solar Energy, 83, 2109, 10.1016/j.solener.2009.07.005
Ibrahim, 2002
IEA, 2008
José, 2005, Improvement of a thermal energy storage using plates with paraffin–graphite composite, International Journal of Heat and Mass Transfer, 48, 2561, 10.1016/j.ijheatmasstransfer.2004.11.027
Jurinak, 1979, Sizing phase change energy storage units for air based solar heating sytems, Solar Energy, 22, 355, 10.1016/0038-092X(79)90189-0
Kalogirou, 2004, Environmental benefits of domestic solar water systems, Energy Conversion and Management, 45, 3075, 10.1016/j.enconman.2003.12.019
Kalogirou, 2004, Solar thermal collectors and applications, Progress in Energy and Combustion Science, 20, 231, 10.1016/j.pecs.2004.02.001
Kamimoto, 1985, Latent heat storage unit using form-stable high density polyethylene for solar thermal applications
Kenisarin, 2007, Solar energy storage using phase change materials, Renewable and Sustainable Energy Reviews, 11, 1913, 10.1016/j.rser.2006.05.005
Kerslake, 1993, Analysis of thermal energy storage material with change-of-phase volumetric effects, Journal of Solar Energy Engineering, 115, 176, 10.1115/1.2930019
Kinney, 2008, Approaches for estimating effects of climate change on heat-related deaths: Challenges and opportunities, Environmental Science and Policy, 11, 87, 10.1016/j.envsci.2007.08.001
Kousksou, 2011, PCM storage for solar DHW: From an unfulfilled promise to a real benefit, Solar Energy, 85, 2033, 10.1016/j.solener.2011.05.012
Kousksou, 2007, Second law analysis of latent thermal storage for solar system, Solar Energy Materials and Solar Cells, 91, 1275, 10.1016/j.solmat.2007.04.029
Krishnananth, 2012, Experimental study on double pass solar air heater with thermal energy storage, Journal of King Saud University-Engineering Sciences
Lacroix, 1999, Electric water heater designs for load shifting and control of bacterial contamination, Energy Conversion and Management, 40, 1313, 10.1016/S0196-8904(99)00013-8
Li, 2011, Study on preparation, structure and thermal energy storage property of capric–palmitic acid/attapulgite composite phase change materials, Applied Energy, 88, 3125, 10.1016/j.apenergy.2011.02.030
Liu, 2001, Calorimetric evaluation of phase change materials for use as thermal interface materials, Thermochimica Acta, 366, 135, 10.1016/S0040-6031(00)00716-4
Li-Wu, 2013, Effects of melting temperature and the presence of internal fins on the performance of a phase change material (PCM)-based heat sink, International Journal of Thermal Sciences, 70, 114, 10.1016/j.ijthermalsci.2013.03.015
Long, 2008, Numerical and experimental study on heat pump water heater with PCM for thermal storage, Energy and Buildings, 40, 666, 10.1016/j.enbuild.2007.05.001
Medrano, 2009, Experimental evaluation of commercial heat exchangers for use as PCM thermal storage systems, Applied Energy, 86, 2047, 10.1016/j.apenergy.2009.01.014
Mehling, 2002, Improvement of stratified hot water heat stores using a PCM-module
Mehling, 2003, PCM-module to improve hot water heat stores with stratification, Renewable Energy, 28, 699, 10.1016/S0960-1481(02)00108-8
Mehling, 2008, 181
Michelsa, 2007, Cascaded latent heat storage for parabolic trough solar power plants, Solar Energy, 81, 829, 10.1016/j.solener.2006.09.008
Mohammed, 2004, A review on phase change energy storage: Materials and applications, Energy Conversion and Management, 45, 1597, 10.1016/j.enconman.2003.09.015
Morrison, 1978, Effects of phase-change energy storage on the performance of air-based and liquid-based solar heating systems, Solar Energy, 20, 57, 10.1016/0038-092X(78)90141-X
Nallusamy, 2007, Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources, Renewable Energy, 32, 1206, 10.1016/j.renene.2006.04.015
Neeper, 2000, Thermal dynamics of wallboard with latent heat storage, Solar Energy, 68, 393, 10.1016/S0038-092X(00)00012-8
Ng, 2009, Policies and technical guidelines for urban planning of high-density cities - air ventilation assessment (AVA) of Hong Kong, Building and Environment, 44, 1478, 10.1016/j.buildenv.2008.06.013
Nkwetta, 2008, Short-term performance evolution of a novel retrofit heat exchanger for solar water heating systems
Pérez-Lombard, 2008, A review on buildings energy consumption information, Energy and Buildings, 40, 394, 10.1016/j.enbuild.2007.03.007
Porisini, 1988, Salt hydrates used for latent heat storage: Corrosion of metals and reliability of thermal performance, Solar Energy, 41, 193, 10.1016/0038-092X(88)90136-3
Py, 2001, Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material, International Journal of Heat and Mass Transfer, 44, 2727, 10.1016/S0017-9310(00)00309-4
Rabin, 1995, Integrated solar collector storage system based on a salt-hydrate phase-change material, Solar Energy, 55, 435, 10.1016/0038-092X(95)00074-2
Regin, 2008, Heat transfer characteristics of thermal energy storage system using PCM capsules: A review, Renewable and Sustainable Energy Reviews, 12, 2438, 10.1016/j.rser.2007.06.009
Rosa, 2012, Urban policies and sustainable energy management, Sustainable Cities and Society, 4, 29, 10.1016/j.scs.2012.03.003
Saitoh, 1985, Spherical capsule-type latent heat thermal energy storage/heat pump system with application to solar system
Saman, 2005, Thermal performance of PCM thermal storage unit for a roof integrated solar heating system, Solar Energy, 78, 341, 10.1016/j.solener.2004.08.017
Sharma, 2006, Effect of thermo-physical properties of heat exchanger material on the performance of latent heat storage system using an enthalpy method, International Journal of Energy Research, 30, 191, 10.1002/er.1130
Sharma, 2009, Review on thermal energy storage with phase change materials and applications, Renewable and Sustainable Energy Reviews, 13, 318, 10.1016/j.rser.2007.10.005
Shukla, 2012, A state of art review on the performance of transpired solar collector, Renewable and Sustainable Energy Reviews, 16, 3975, 10.1016/j.rser.2012.02.029
Sokhansan, 1991, Evaluation of a solar collector system with thermal storage for preheating ventilation air in farm buildings, Energy Conversion and Management, 32, 183, 10.1016/0196-8904(91)90157-E
Sozen, 1991, Thermal charging and discharging of sensible and latent heat storage packed beds, AIAA Journal of Thermophysics, 5, 623, 10.2514/3.309
Stritih, 2002, Thermal storage of solar energy in the wall for building Ventilation
Talmatsky, 2008, PCM storage for solar DHW: An unfulfilled promise?, Solar Energy, 82, 861, 10.1016/j.solener.2008.04.003
Tian, 2012, A thermal and exergetic analysis of Metal Foam-enhanced Cascaded thermal Energy storage (MF-CTES), International Journal of Heat and Mass Transfer, 58, 86, 10.1016/j.ijheatmasstransfer.2012.11.034
Tian, 2011, A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals, Energy, 36, 5539, 10.1016/j.energy.2011.07.019
Tian, 2013, A review of solar collectors and thermal energy storage in solar thermal applications, Applied Energy, 104, 538, 10.1016/j.apenergy.2012.11.051
Tyagi, 2012, Comparative study based on exergy analysis of solar air heater collector using thermal energy storage, International Journal of Energy Research, 36, 724, 10.1002/er.1827
Vakilaltojjar, 2001, Analysis and modeling of a phase change storage system for air conditioning applications, Applied Thermal Engineering, 21, 249, 10.1016/S1359-4311(00)00037-5
Verma, 2008, Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material, Renewable and Sustainable Energy Reviews, 12, 999, 10.1016/j.rser.2006.11.002
Wang, 2012, Multi-zone building energy management using intelligent control and optimization, Sustainable Cities and Society
Zalba, 2003, Review on thermal energy storage with phase change: Materials, heat transfer analysis and applications, Applied Thermal Engineering, 23, 251, 10.1016/S1359-4311(02)00192-8