Thermal energy storage inside the chamber with a brick wall using the phase change process of paraffinic materials: A numerical simulation

Shaker, 2022, CFD analysis of Al2O3-syltherm oil Nanofluid on parabolic trough solar collector with a new flange-shaped turbulator model, Theoret. Appl. Mech. Lett., 12, 10.1016/j.taml.2022.100323

Sani, 2022, The effect of MoS2–Ag/H2O hybrid nanofluid on improving the performance of a solar collector by placing wavy strips in the absorber tube, Case Stud. Therm. Eng., 30, 10.1016/j.csite.2022.101760

Armin, 2021, Investigation of the fuel injection angle/time on combustion, energy, and emissions of a heavy-duty dual-fuel diesel engine with reactivity control compression ignition mode, Energy Reports, 7, 5239, 10.1016/j.egyr.2021.08.115

Zadeh, 2021, Performance assessment and optimization of a helical Savonius wind turbine by modifying the Bach's section, SN Appl. Sci., 3, 739, 10.1007/s42452-021-04731-0

Khandouzi, 2021, Evaluating and optimizing the geometry of thermal foundation pipes for the utilization of the geothermal energy: Numerical simulation, J. Energy Storage, 37, 10.1016/j.est.2021.102464

Ye, 2018, Research on melting and solidification processes for enhanced double tubes with constant wall temperature/wall heat flux, Heat Transfer Asian Res., 47, 583, 10.1002/htj.21328

Deng, 2019, Improving the melting performance of a horizontal shell-tube latent-heat thermal energy storage unit using local enhanced finned tube, Energy Build., 183, 161, 10.1016/j.enbuild.2018.11.018

Ye, 2012, Fluid flow and heat transfer in a latent thermal energy unit with different phase change material (PCM) cavity volume fractions, Appl. Therm. Eng., 42, 49, 10.1016/j.applthermaleng.2012.03.002

Hong, 2018, Can the melting behaviors of solid-liquid phase change be improved by inverting the partially thermal-active rectangular cavity?, Int. J. Heat Mass Transfer, 126, 571, 10.1016/j.ijheatmasstransfer.2018.06.012

Hong, 2019, Solid-liquid phase-change thermal storage and release behaviors in a rectangular cavity under the impacts of mushy region and low gravity, Int. J. Heat Mass Transfer, 130, 1120, 10.1016/j.ijheatmasstransfer.2018.11.024

Ye, 2016, Thermal and hydraulic performance of natural convection in a rectangular storage cavity, Appl. Therm. Eng., 93, 1114, 10.1016/j.applthermaleng.2015.10.083

Al-Abidi, 2013, Internal and external fin heat transfer enhancement technique for latent heat thermal energy storage in triplex tube heat exchangers, Appl. Therm. Eng., 53, 147, 10.1016/j.applthermaleng.2013.01.011

Pizzolato, 2017, Design of effective fins for fast PCM melting and solidification in shell-and-tube latent heat thermal energy storage through topology optimization, Appl. Energy, 208, 210, 10.1016/j.apenergy.2017.10.050

Nakhchi, 2021, A numerical study on the effects of nanoparticles and stair fins on performance improvement of phase change thermal energy storages, Energy, 215, 10.1016/j.energy.2020.119112

Mahdi, 2019, Simultaneous energy storage and recovery in the triplex-tube heat exchanger with PCM, copper fins and Al2O3 nanoparticles, Energy Convers. Manage., 180, 949, 10.1016/j.enconman.2018.11.038

Gholinia, 2020, Investigation of different base fluids suspend by CNTs hybrid nanoparticle over a vertical circular cylinder with sinusoidal radius, Case Stud. Therm. Eng., 21, 10.1016/j.csite.2020.100666

Hatami, 2016, Optimization of a circular-wavy cavity filled by nanofluid under the natural convection heat transfer condition, Int. J. Heat Mass Transfer, 98, 758, 10.1016/j.ijheatmasstransfer.2016.03.063

Rehman, 2018, Thermo-physical aspects in tangent hyperbolic fluid flow regime: A short communication, Case Stud. Therm. Eng., 12, 203, 10.1016/j.csite.2018.04.014

Asgari, 2021, Simulation of solidification process of phase change materials in a heat exchanger using branch-shaped fins, Case Stud. Therm. Eng., 25, 10.1016/j.csite.2020.100835

Lohrasbi, 2017, Thermal penetration depth enhancement in latent heat thermal energy storage system in the presence of heat pipe based on both charging and discharging processes, Energy Convers. Manage., 148, 646, 10.1016/j.enconman.2017.06.034

Rehman, 2020, Heat transfer individualities due to evenly heated T-Shaped blade rooted in trapezium enclosure: numerical analysis, Case Stud. Therm. Eng., 22, 10.1016/j.csite.2020.100778

Hatami, 2014, Thermal and flow analysis of microchannel heat sink (MCHS) cooled by Cu–water nanofluid using porous media approach and least square method, Energy Convers. Manage., 78, 347, 10.1016/j.enconman.2013.10.063

Sharma, 2009, Review on thermal energy storage with phase change materials and applications, Renewable Sustainable Energy Rev., 13, 318, 10.1016/j.rser.2007.10.005

Zalba, 2003, Review on thermal energy storage with phase change: materials, heat transfer analysis and applications, Appl. Therm. Eng., 23, 251, 10.1016/S1359-4311(02)00192-8

Ye, 2011, Numerical simulation on phase-change thermal storage/release in a plate-fin unit, Appl. Therm. Eng., 31, 3871, 10.1016/j.applthermaleng.2011.07.035

Motahar, 2020, Experimental study and ANN-based prediction of melting heat transfer in a uniform heat flux PCM enclosure, J. Energy Storage, 30, 10.1016/j.est.2020.101535

Bouhal, 2018, Parametric CFD analysis and impact of PCM intrinsic parameters on melting process inside enclosure integrating fins: Solar building applications, J. Build. Eng., 20, 634, 10.1016/j.jobe.2018.09.016