Thermal effect on stability and minimum oil film thickness of a deep/shallow pockets conical bearing

Industrial Lubrication and Tribology - Tập 72 Số 10 - Trang 1251-1257 - 2020
Ningning Wu1, Hong Guo1, Shuai Yang1, Shaolin Zhang1
1School of Mechanical and Power Engineering, Zhengzhou University Zhengzhou China

Tóm tắt

PurposeThis paper aims to study the influence of thermal effect on the performance for a high-speed conical hybrid bearing including stability and minimum oil film thickness.Design/methodology/approachA thermal hydrodynamic (THD) model and dynamic model of single mass rigid rotor system were established by taking conical hybrid bearing with shallow and deep pockets as the research object, dynamic coefficient and stability parameters of bearing-rotor system were obtained by using finite element method (FEM) and finite difference method (FDM) to solve computational models of Reynolds equation, energy equation and viscosity-temperature equation. Minimum oil film thickness was obtained based on bearing force balance. Dynamic coefficient was compared with previous findings.FindingsAfter considering thermal effect, the dimensionless critical mass decreases, a significant decrease in the instability speed, and the stability of the system decreases greatly; the minimum oil film thickness decreases because of thermal effect.Originality/valueThe thermal effect is combined with dynamic characteristics to analyze stability of the rotor system for a conical hybrid bearing. Influence of thermal effect on minimum oil film thickness is studied.Peer reviewThe peer review history for this article is available at:https://publons.com/publon/10.1108/ILT-12-2019-0542/

Từ khóa


Tài liệu tham khảo

2013, Effects of manufacturing errors on tribological characteristics of 3-D textured micro- thrust bearings, CIRP Journal of Manufacturing Science and Technology, 6, 128, 10.1016/j.cirpj.2012.12.001

1992, A steady-state model of a floating ring bearing, including thermal effects, Journal of Tribology, 114, 141, 10.1115/1.2920852

2018, Dynamic characteristics of a non-symmetric tilting pad journal bearing, International Conference on Advanced Engineering Theory and Applications, 554, 658

2019, A thermohydrodynamic approach for single-film and double-film floating disk fixed thrust bearings verified with experiment, Tribology International, 140, 1

2019, Investigations of the static and dynamic characteristics of water-lubricated hydrodynamic journal bearing considering turbulent, thermohydrodynamic and misaligned effects, Tribology International, 130, 245, 10.1016/j.triboint.2018.09.007

2019, Multi-Scale surface texturing in tribology – current knowledge and future perspectives, Lubricants, 7, 1

2019, Influence of temperature–viscosity effect on ring-journal speed ratio and stability for a hydrodynamic floating ring bearing, Industrial Lubrication and Tribology, 71, 540, 10.1108/ILT-08-2018-0329

2009, Theoretical and experimental study on dynamic coefficients and stability for a hydrostatic/hydrodynamic conical bearing, Journal of Tribology, 131, 1

2020, Effect of single- and multi-scale surface patterns on the frictional performance of journal bearings – a numerical study, Tribology International, 143, 1

2012, Influence of turbulence on the static characteristics of conical journal bearings, Russian Engineering Research, 32, 338, 10.3103/S1068798X12040156

2013, Analysis of externally pressurized multirecess conical hybrid journal bearing system using micropolar lubricant, Part J: Journal of Engineering Tribology, 227, 943

2019, Stiffness and damping characteristics of conical multirecess hybrid journal bearing for different load arrangements, SN Applied Sciences, 1, 604, 10.1007/s42452-019-0609-y

2019, Influence of surface texturing on hydrodynamic friction in plane converging bearings – an experimental and numerical approach, Tribology International, 134, 190, 10.1016/j.triboint.2019.01.042

2009, Steady state and dynamic characteristics of axial grooved journal bearings, Tribology International, 42, 754, 10.1016/j.triboint.2008.10.010

2019, Magneto-rheological fluid slot-entry journal bearing considering thermal effects, Journal of Intelligent Material Systems and Structures, 30, 2831

2019, Research on the oil film temperature field of hydrostatic bearing with variable viscosity dynamic simulation and experiment, Part J: Journal of Engineering Tribology, 233, 1

2020, Thermal turbulent lubrication analysis of rough surface journal bearing with journal misalignment, Tribology International, 144, 1

Thông tin
Thông tin xuất bản

Industrial Lubrication and Tribology

Tập 72 Số 10

1251-1257

Thông tin tác giả