Thermal degradation of waste plastics under non-sweeping atmosphere: Part 1: Effect of temperature, product optimization, and degradation mechanism

Achilias, 2007, Chemical recycling of polystyrene by pyrolysis: potential use of the liquid product for the reproduction of polymer, Macromol. Mater. Eng., 292, 923, 10.1002/mame.200700058 Achilias, 2007, Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP), J. Hazard Mater., 149, 536, 10.1016/j.jhazmat.2007.06.076 Adrados, 2012, Pyrolysis of plastic packaging waste: a comparison of plastic residuals from material recovery facilities with simulated plastic waste, Waste Manag., 32, 826, 10.1016/j.wasman.2011.06.016 Aguado, 1999 Aguado, 2008, Fuels from waste plastics by thermal and catalytic processes: a review, Ind. Eng. Chem. Res., 47, 7982, 10.1021/ie800393w Ali, 2011, Catalytic co-processing of coal and petroleum residues with waste plastics to produce transportation fuels, Fuel Process. Technol., 92, 1109, 10.1016/j.fuproc.2011.01.006 Al-Salem, 2009, Recycling and recovery routes of plastic solid waste (PSW): a review, Waste Manag., 29, 2625, 10.1016/j.wasman.2009.06.004 Al-Salem, 2010, The valorization of plastic solid waste (PSW) by primary to quaternary routes: from re-use to energy and chemicals, Prog. Energy Combust., 36, 103, 10.1016/j.pecs.2009.09.001 Ates, 2013, Comparision of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part I: product yields, gas and pyrolysis oil properties, Bioresour. Technol., 133, 443, 10.1016/j.biortech.2013.01.112 Bäckström, 2017, Trash to treasure: microwave-assisted conversion of polyethylene to functional chemicals, Ind. Eng. Chem. Res., 10.1021/acs.iecr.7b04091 Bhattacharya, 2018 Buekens, 1998, Catalytic plastics cracking for recovery of gasoline range hydrocarbons from municipal plastic wastes, Resour. Conserv. Recy, 23, 163, 10.1016/S0921-3449(98)00025-1 2018 Cepeliogullar, 2013, Utilization of two different types of plastic wastes from daily and industrial life, 1 Ciliz, 2004, Pyrolysis of virgin and waste polypropylene and its mixtures with waste polyethylene and polystyrene, Waste Manag., 24, 173, 10.1016/j.wasman.2003.06.002 Demirbas, 2004, Pyrolysis of municipal plastic wastes for recovery of gasoline range hydrocarbons, J. Anal. Appl. Pyrolysis, 72, 97, 10.1016/j.jaap.2004.03.001 Elliot, 2018 Elordi, 2011, Product yields and compositions in the continuous pyrolysis of high-density polyethylene in a conical spouted bed reactor, Ind. Eng. Chem. Res., 50, 6650, 10.1021/ie200186m 2018 Fakhrhoseini, 2013, Predicting pyrolysis products of PE, PP, and PET using NRTL activity coefficient model, J. Chem., 1, 1, 10.1155/2013/487676 Faravelli, 2001, Thermal degradation of polystyrene, J. Anal. Appl. Pyrolysis, 60, 103, 10.1016/S0165-2370(00)00159-5 Grieken, 2001, Thermal and catalytic cracking of polyethylene under mild conditions, J. Anal. Appl. Pyrolysis, 58–59, 127, 10.1016/S0165-2370(00)00145-5 Guddeti, 2000, Depolymerization of polyethylene using induction-coupled plasma technology, Plasma Chem. Plasma Process., 20, 37, 10.1023/A:1006969710410 Heydariaraghi, 2016, Fuel properties of the oils produced from the pyrolysis of commonly-used polymers: effect of fractionating column, J. Anal. Appl. Pyrolysis, 121, 307, 10.1016/j.jaap.2016.08.010 Hussain, 2012, The conversion of waste polystyrene into useful hydrocarbons by microwave metal interaction pyrolysis, Fuel Process. Technol., 94, 145, 10.1016/j.fuproc.2011.10.009 Kaminsky, 2004, Feedstock recycling of polymers by pyrolysis in a fluidised bed, Polym. Degrad. Stabil., 85, 1045, 10.1016/j.polymdegradstab.2003.05.002 Kodera, 2006, Novel process for recycling waste plastics to fuel gas using a moving-bed reactor, Energy Fuels, 20, 155, 10.1021/ef0502655 Kumar, 2011, A review on tertiary recycling of high-density polyethylene to fuel, Resour. Conserv., Recy55, 893, 10.1016/j.resconrec.2011.05.005 Kumar, 2011, Recovery of hydrocarbon liquid from waste high density polyethylene by thermal pyrolysis, Braz. J. Chem. Eng., 28, 659, 10.1590/S0104-66322011000400011 Kunwar, 2016, Plastics to fuel: a review, Renew. Sustain. Energy Rev., 54, 421, 10.1016/j.rser.2015.10.015 Kunwar, 2016, Catalytic and thermal depolymerization of low value post-consumer high density polyethylene plastic, Energy, 111, 884, 10.1016/j.energy.2016.06.024 Lettieri, 2011, 233 López, 2011, Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor, Chem. Eng. J., 173, 62, 10.1016/j.cej.2011.07.037 López, 2010, Pyrolysis of municipal plastic wastes: influence of raw material composition, Waste Manag., 30, 620, 10.1016/j.wasman.2009.10.014 Marcilla, 2009, Thermal and catalytic pyrolysis of polyethyleneover HZSM5 and HUSY zeolites in a batch reactor underdynamicconditions, Appl. Catal. B Environ., 86, 78, 10.1016/j.apcatb.2008.07.026 Miandad, 2016, Effect of plastic waste types on pyrolysis liquid oil, Int. Biodeterior. Biodegrad., 119, 239, 10.1016/j.ibiod.2016.09.017 Miandad, 2016, Catalytic pyrolysis of plastic waste: a review, Process Saf. Environ. Protect., 102, 822, 10.1016/j.psep.2016.06.022 Miskolczi, 2006, Thermal degradation of polyethylene and polystyrene from the packaging industry over different catalysts into fuel-like feed stocks, Polym. Degrad. Stabil., 91, 517, 10.1016/j.polymdegradstab.2005.01.056 Miskolczi, 2004, Thermal and thermo-catalytic degradation of high-density polyethylene waste, J. Anal. Appl. Pyrolysis, 72, 235, 10.1016/j.jaap.2004.07.002 Muhammad, 2015, Thermal degradation of real-world waste plastics and simulated mixed plastics in a two-stage Pyrolysis−Catalysis reactor for fuel production, Energy Fuels, 29, 2601, 10.1021/ef502749h Panda, 2012, Thermocatalytic degradation of thermocol waste to value added products, Asian J. Chem., 24 PapugaSaša, 2016, Temperature and time influence on waste plastics pyrolysis in the fixed bed reactor, Therm. Sci., 20, 731, 10.2298/TSCI141113154P Pragnesh, 2010, Plasma Pyrolysis and gasification of plastic wastes: a Review, J. Sci. Ind. Res., 69, 77 Punčochář, 2012, Development of process for disposal of plastic waste using plasma pyrolysis technology and option for energy recovery, Procedia Engineering, 42, 420, 10.1016/j.proeng.2012.07.433 Ranzi, 1997, Kinetic modeling of polyethylene and polypropylene thermal degradation, J. Anal. Appl. Pyrolysis, 40–41, 305, 10.1016/S0165-2370(97)00032-6 Sakata, 1996, Thermal degradation of polyethylene mixed with poly(vinyl chloride) and poly(ethyleneterephthalate), Polym. Degrad. Stabil., 53, 111, 10.1016/0141-3910(96)00077-8 Scott, 1990, Fast pyrolysis of plastic wastes, Energy Fuels, 4, 407, 10.1021/ef00022a013 Seo, 2003, Investigation of catalytic degradation of high-density polyethylene by hydrocarbon group type analysis, J. Anal. Appl. Pyrolysis, 70, 383, 10.1016/S0165-2370(02)00186-9 Sharma, 2014, Production, characterization and fuel properties of alternative diesel fuel from pyrolysis of waste plastic grocery bags, Fuel Process. Technol., 122, 79, 10.1016/j.fuproc.2014.01.019 Siddiqui, 2009, Pyrolysis of mixed plastics for the recovery of useful products, Fuel Process, Technol., 90, 545 Singh, 2015, Plastic waste management and disposal techniques - Indian scenario, Int. J. Plast. Tech., 19, 211, 10.1007/s12588-015-9120-5 Singh, 2016, Time and temperature depended fuel gas generation from pyrolysis of real world municipal plastic waste, Fuel, 174, 164, 10.1016/j.fuel.2016.01.049 Singh, 2019, Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: product yield analysis and their characterization, J. Energy Inst., 10.1016/j.joei.2019.01.009 Sogancioglu, 2017, A comparative study on waste plastics pyrolysis liquid products quantity and energy recovery potential, Energy Procedia, 118, 221, 10.1016/j.egypro.2017.07.020 Syamsiro, 2014, Fuel oil production from municipal plastic wastes in sequential pyrolysis and catalytic reforming reactors, Energy Procedia, 47, 180, 10.1016/j.egypro.2014.01.212 Vasile, 2001, Thermal and catalytic decomposition of mixed plastics, J. Anal. Appl. Pyrolysis, 57, 287, 10.1016/S0165-2370(00)00151-0 Williams, 1997, The pyrolysis of individual plastics and a plastic mixture in a fixed bed reactor, J. Chem. Tech. Biotech, 70, 9, 10.1002/(SICI)1097-4660(199709)70:1<9::AID-JCTB700>3.0.CO;2-E Williams, 2007, Analysis of products from the pyrolysis and liquefaction of single plastics and waste plastic mixtures, Resour. Conserv. Recy51, 754, 10.1016/j.resconrec.2006.12.002 Wong, 2015, Current state and future prospects of plastic waste as source of fuel: a review, Renew. Sustain. Energy Rev., 50, 1167, 10.1016/j.rser.2015.04.063 Yan, 2015, Thermal cracking of virgin and waste plastics of PP and LDPE in a semibatch reactor under atmospheric pressure, Energy Fuels, 29, 2289, 10.1021/ef502919f