Thermal degradation and performance evolution mechanism of fully recyclable 3D printed continuous fiber self-reinforced composites

Bachmann, 2021, Towards a circular economy in the aviation sector using eco-composites for interior and secondary structures. Results and recommendations from the EU/China project ECO-COMPASS [J], Aerospace, 8, 131, 10.3390/aerospace8050131 Ghosh, 2020, Cradle-to-cradle approach to waste tyres and development of silica based green Tyre composites [J], Resour. Conserv. Recycl., 154, 10.1016/j.resconrec.2019.104629 Paek, 2022, Composites additive manufacturing for space applications: a review [J], Materials, 15, 4709, 10.3390/ma15134709 China National Space Administration, 2020 Makaya, 2023, Towards out of earth manufacturing: overview of the ESA materials and processes activities on manufacturing in space [J], CEAS Space J., 15, 69, 10.1007/s12567-022-00428-1 Owens, 2016, Systems analysis of in-space manufacturing applications for the international Space Station and the evolvable Mars campaign [M], AIAA Space Prater, 2018, In-space manufacturing at NASA Marshall Space Flight Center: a portfolio of fabrication and recycling technology development for the international space station [M], 2018 The National Aeronautics and Space Administration (NASA), 2017, An Overview of NASA’s In-Space Manufacturing Project Yang, 2012, Recycling of composite materials [J], Chem. Eng. Process. Process Intensif., 51, 53, 10.1016/j.cep.2011.09.007 Zhao, 2023, Recovery of epoxy thermosets and their composites [J], Mater. Today, 64, 72, 10.1016/j.mattod.2022.12.005 Leal, 2016, Novel approach for the development of ultra-light, fully-thermoplastic composites [J], Mater. Des., 93, 334, 10.1016/j.matdes.2015.12.125 Yao, 2018, Recent advances in carbon-fiber-reinforced thermoplastic composites: a review [J], Compos. Part B Eng., 142, 241, 10.1016/j.compositesb.2017.12.007 Kiss, 2020, In-house recycling of carbon- and glass fibre-reinforced thermoplastic composite laminate waste into high-performance sheet materials [J], Compos. A: Appl. Sci. Manuf., 139, 10.1016/j.compositesa.2020.106110 Pegoretti, 2021, Towards sustainable structural composites: a review on the recycling of continuous-fiber-reinforced thermoplastics [J], Adv. Indust. Eng. Polym. Res., 4, 105, 10.1016/j.aiepr.2021.03.001 Graupner, 2016, Influence of reprocessing on fibre length distribution, tensile strength and impact strength of injection moulded cellulose fibre-reinforced polylactide (PLA) composites [J], Express Polym Lett, 10, 647, 10.3144/expresspolymlett.2016.59 Vincent, 2019, Shredding and sieving thermoplastic composite scrap: method development and analyses of the fibre length distributions [J], Compos. Part B Eng., 176, 10.1016/j.compositesb.2019.107197 Meng, 2018, Comparing life cycle energy and global warming potential of carbon Fiber composite recycling technologies and waste management options [J], ACS Sustain. Chem. Eng., 6, 9854, 10.1021/acssuschemeng.8b01026 Kmetty, 2010, Self-reinforced polymeric materials: a review [J], Prog. Polym. Sci., 35, 1288, 10.1016/j.progpolymsci.2010.07.002 Santos, 2021, Commercial self-reinforced composites: a comparative study [J], Compos. Part B Eng., 223, 10.1016/j.compositesb.2021.109108 Schneider, 2015, Compression properties of novel thermoplastic carbon fibre and poly-ethylene terephthalate fibre composite lattice structures [J], Mater. Des., 65, 1110, 10.1016/j.matdes.2014.08.032 Luo, 2014, Preparation and performance of long carbon fiber reinforced polyamide 6 composites injection-molded from core/shell structured pellets [J], Mater. Des., 64, 294, 10.1016/j.matdes.2014.07.054 Tian, 2022, 3D printing of continuous fiber reinforced polymer composites: development, application, and prospective [J], Chin. J. Mech. Eng., 1 Tian, 2022, Roadmap for additive manufacturing: toward intellectualization and industrialization [J], Chin. J. Mech. Eng., 1 Cheng, 2023, 3D printed continuous fiber reinforced composite lightweight structures: a review and outlook [J], Compos. Part B Eng., 250, 10.1016/j.compositesb.2022.110450 Zhang, 2021, Interfacial transcrystallization and mechanical performance of 3D-printed fully recyclable continuous fiber self-reinforced composites [J], Polymers, 13, 3176, 10.3390/polym13183176 Tian, 2017, Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites [J], J. Clean. Prod., 142, 1609, 10.1016/j.jclepro.2016.11.139 Zhang, 2023, 3D printing of fully recyclable continuous fiber self-reinforced composites utilizing supercooled polymer melts [J], Compos. A: Appl. Sci. Manuf., 169, 10.1016/j.compositesa.2023.107513 Yan, 2022, Investigation on thermal degradation mechanism of poly(phenylene sulfide) [J], Polym. Degrad. Stab., 197, 10.1016/j.polymdegradstab.2022.109863 Schniederjans, 2017, Adoption of 3D-printing technologies in manufacturing: a survey analysis [J], Int. J. Prod. Econ., 183, 287, 10.1016/j.ijpe.2016.11.008 Zhong, 2018, Tightening the loop on the circular economy: coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing [J], Resour. Conserv. Recycl., 128, 48, 10.1016/j.resconrec.2017.09.023 Oliveux, 2015, Current status of recycling of fibre reinforced polymers: review of technologies, reuse and resulting properties [J], Prog. Mater. Sci., 72, 61, 10.1016/j.pmatsci.2015.01.004 Zocca, 2022, Challenges in the technology development for additive manufacturing in space [J], Chin. J. Mech. Eng., 1 Prater, 2019, 3D printing in zero G technology demonstration Mission: complete experimental results and summary of related material modeling efforts [J], Int. J. Adv. Manuf. Technol., 101, 391, 10.1007/s00170-018-2827-7