Thermal deformation and stress analysis of disk brakes by finite element method
Tóm tắt
The present study was conducted to analyze which the geometry of vents in motorcycle disk brakes affects the surface of the disk. In order to analyze the thermal characteristics of disk brakes, thermal deformation analysis and thermal stress analysis due to heat transfer was carried out through the finite element analysis for ventilated disk and solid disk. By comparing the maximum temperature in the braking process, the ventilated disk showed a lower temperature than the solid disk and effect of temperature increase and decrease, depending on the vent area generated in the flange part of the disk. The thermal deformation in ventilated disk type occurs in all directions by 0.1162 mm, thermal distribution in the circumferential direction showed large deviation, about 0.017 mm due to the vents.
Tài liệu tham khảo
M. R. Ryu, S. D. Moon and H. S. Park, A study on thermal stress analysis of motorcycle disk brake, Korean Society of Tribologists and Lubrication Engineers, 24(6) (2008) 308–314.
J. H. Choi, D. H. Kim and I. Lee, Thermal analysis of automotive disc brake using FFT-FEM, Korean Society of Mechanical Engineers(A), 25(8) (2001) 1253–1260.
M. Sasada, K. Okubo, T. Fujii and N. Kameda, Effects of hole layout, braking torque and frictional heat on crack initiation from small holes in one-piece brake disks, Proc. of Seoul 2000 FISITA World Automotive Congress, Korea (2000) F2000G331.
H. H. Kim, S. W. Lee, D. S. Han and G. J. Han, Thermalstructural coupled field analysis of the circumferential pressing type brake disc, Korean Society of Automotive Engineers, 16(4) (2008) 69–74.
H. G. Lee, M. H. Son, Y. W. Seo, K. S. Boo and H. S. Kim, The study on the influence of pad wear on brake squeal analysis, Korean Society of Mechanical Engineers(A), 32(11) (2008) 930–936.
S. M. Joo, Y. S. Kwon and H. K. Kim, A study on the fatigue damage of a railway disc brake surface due to thermal stress during braking using FEM analysis, Korean Society for Railway, 12(2) (2009) 212–218.
T. I. Yeo, A study on axisymmetric finite element analysis of brake disk using equivalent parameters, Proc. of Korean Society of Automotive Engineers Spring Conference, Jeju, Korea (2002) 1348–1353.
ANSYS 11.0 Workbench Training Manual, Ver. 2009, ANSYS Inc., Seoul, Korea (2009).