Thermal compensation of ultrasonic transmit and receive data for steel welded plates at the point of manufacture

Drinkwater, 2006, Ultrasonic arrays for non-destructive evaluation: a review, NDT E Int, 39, 525, 10.1016/j.ndteint.2006.03.006 Krautkrämer, 2013 Fan, 2014, A comparison between ultrasonic array beamforming and super resolution imaging algorithms for non-destructive evaluation, Ultrasonics, 54, 1842, 10.1016/j.ultras.2013.12.012 Le Jeune, 2016, Plane Wave Imaging for ultrasonic non-destructive testing: generalization to multimodal imaging, Ultrasonics, 64, 128, 10.1016/j.ultras.2015.08.008 Holmes, 2005, Post-processing of the full matrix of ultrasonic transmit–receive array data for non-destructive evaluation, NDT E Int, 38, 701, 10.1016/j.ndteint.2005.04.002 Camacho, 2009, Phase coherence imaging, IEEE Trans Ultrason Ferroelectrics Freq Control, 56, 958, 10.1109/TUFFC.2009.1128 Hunter, 2008, The wavenumber algorithm for full-matrix imaging using an ultrasonic array, IEEE Trans Ultrason Ferroelectrics Freq Control, 55, 2450, 10.1109/TUFFC.952 Portzgen, 2007, Inverse wave field extrapolation: a different NDI approach to imaging defects, IEEE Trans Ultrason Ferroelectrics Freq Control, 54, 118, 10.1109/TUFFC.2007.217 Zhang, 2010, Defect detection using ultrasonic arrays: the multi-mode total focusing method, NDT E Int, 43, 123, 10.1016/j.ndteint.2009.10.001 Wilcox, 2020, Fusion of multi-view ultrasonic data for increased detection performance in non-destructive evaluation, Proc R Soc Math Phys Sci, 476 Bevan, 2020, Data fusion of multiview ultrasonic imaging for characterization of large defects, IEEE Trans Ultrason Ferroelectrics Freq Control, 67, 2387, 10.1109/TUFFC.2020.3004982 Budyn, 2021, Characterisation of small embedded two-dimensional defects using multi-view Total Focusing Method imaging algorithm, NDT E Int, 119, 10.1016/j.ndteint.2021.102413 Stratoudaki, 2017, Adapting the full matrix capture and the Total Focusing Method to laser ultrasonics for remote non destructive testing Stratoudaki, 2017, Full matrix capture and the total focusing imaging algorithm using laser induced ultrasonic phased arrays, AIP Conf Proc, 1806, 10.1063/1.4974563 Stratoudaki, 2016, Laser induced ultrasonic phased array using full matrix capture data acquisition and total focusing method, Opt Express, 24, 21921, 10.1364/OE.24.021921 Mineo, 2021, Generalised bisection method for optimum ultrasonic ray tracing and focusing in multi-layered structures, Ultrasonics, 111, 10.1016/j.ultras.2020.106330 Mineo, 2022, Solving ultrasonic ray tracing in parts with multiple material layers through Root-Finding methods, Ultrasonics, 124, 10.1016/j.ultras.2022.106747 Nowers, 2016, Ultrasonic array imaging through an anisotropic austenitic steel weld using an efficient ray-tracing algorithm, NDT E Int, 79, 98, 10.1016/j.ndteint.2015.12.009 Connolly, 2010, Correction of ultrasonic array images to improve reflector sizing and location in inhomogeneous materials using a ray-tracing model, J Acoust Soc Am, 127, 2802, 10.1121/1.3372724 Nowers, 2014, Novel ray-tracing algorithms in NDE: application of Dijkstra and A⁎ algorithms to the inspection of an anisotropic weld, NDT E Int, 61, 58, 10.1016/j.ndteint.2013.08.002 Tant, 2018, A transdimensional Bayesian approach to ultrasonic travel-time tomography for non-destructive testing, Inverse Probl, 34, 10.1088/1361-6420/aaca8f Tant, 2020, Effective grain orientation mapping of complex and locally anisotropic media for improved imaging in ultrasonic non-destructive testing, Inverse Probl Sci Eng, 28, 1694, 10.1080/17415977.2020.1762596 Javadi, 2019, Intentional weld defect process: from manufacturing by robotic welding machine to inspection using TFM phased array, AIP Conf Proc, 2102, 10.1063/1.5099761 Zimermann, 2021, Multi-layer ultrasonic imaging of as-built Wire + Arc additive manufactured components, Addit Manuf, 48 Vithanage, 2022, Development of a phased array ultrasound roller probe for inspection of wire + arc additive manufactured components, J Manuf Process, 80, 765, 10.1016/j.jmapro.2022.06.045 Zimermann, 2022, Collaborative robotic wire + Arc Additive manufacture and sensor-enabled in-process ultrasonic non-destructive evaluation, Sensors, 22, 4203, 10.3390/s22114203 Möhring, 2005, Partitioning graphs to speed up dijkstra's algorithm, 189 Crauser, 1998, A parallelization of Dijkstra's shortest path algorithm, 722 Huang, 2007, A shortest path algorithm with novel heuristics for dynamic transportation networks, Int J Geogr Inf Sci, 21, 625, 10.1080/13658810601079759 Bourne, 2021, An inverse problem for Voronoi diagrams: A simplified model of non-destructive testing with ultrasonic arrays, Math Methods Appl Sci, 44, 3727, 10.1002/mma.6977 Singh, 2022, Real-time super-resolution mapping of locally anisotropic grain orientations for ultrasonic non-destructive evaluation of crystalline material, Neural Comput Appl, 34, 4993, 10.1007/s00521-021-06670-8 Scruby, 1993, Non-contact ultrasonic measurements on steel at elevated temperatures, NDT E Int, 26, 177, 10.1016/0963-8695(93)90472-7 Silber, 1970, Ultrasonic testing of hot welds, Non-Destr Test, 3, 429, 10.1016/0029-1021(70)90156-8 Javadi, 2020, Continuous monitoring of an intentionally-manufactured crack using an automated welding and in-process inspection system, Mater Des, 191, 10.1016/j.matdes.2020.108655 Lines, 2020, A flexible robotic cell for in-process inspection of multi-pass welds, Insight J Br Inst Non-Destr Test, 62, 526 Javadi, 2021, High-temperature in-process inspection followed by 96-h robotic inspection of intentionally manufactured hydrogen crack in multi-pass robotic welding, Int J Pres Ves Pip, 189, 10.1016/j.ijpvp.2020.104288 Vithanage, 2021, A phased array ultrasound roller probe for automated in-process/interpass inspection of multipass welds, IEEE Trans Ind Electron, 68, 12781, 10.1109/TIE.2020.3042112 ISO 13588:2019 - Non-destructive testing of welds — ultrasonic testing — use of automated phased array technology. Int Stand Organ n.d. ISO 17640:2018 - Non-destructive testing of welds — ultrasonic testing — techniques, testing levels, and assessment. Int Stand Organ n.d. ISO 19285:2017- Non-destructive testing of welds — phased array ultrasonic testing (PAUT) — acceptance levels. Int Stand Organ n.d. Wang, 2015, An imaging and measurement system for robust reconstruction of weld pool during arc welding, IEEE Trans Ind Electron, 62, 5109, 10.1109/TIE.2015.2405494 Li, 2017, Automatic welding seam tracking and identification, IEEE Trans Ind Electron, 64, 7261, 10.1109/TIE.2017.2694399 Schulenburg, 2020, NDT 4.0: opportunity or threat?, Mater Eval, 78, 852 Vasilev, 2021 Vasilev, 2021, Sensor-enabled multi-robot system for automated welding and in-process ultrasonic NDE, Sensors, 21, 10.3390/s21155077 National instrument-9214 16-channel temperature module n.d. https://www.ni.com/en-gb/support/model.ni-9214.html (accessed July 18, 2022). Ledbetter, 1981, Stainless‐steel elastic constants at low temperatures, J Appl Phys, 52, 1587, 10.1063/1.329644 Lee, 1998, Elastic constants determination of thin cold-rolled stainless steels by dynamic elastic modulus measurements, J Mater Sci, 33, 687, 10.1023/A:1004385611382 Sethian, 1999 Hassouna, 2007, Multi-stencils fast marching methods: a highly accurate solution to the eikonal equation on cartesian domains, IEEE Trans Pattern Anal Mach Intell, 29, 1563, 10.1109/TPAMI.2007.1154 Popovici, 2002, 3‐D imaging using higher order fast marching traveltimes, Geophysics, 67, 604, 10.1190/1.1468621 Rawlinson, 2004, Wave front evolution in strongly heterogeneous layered media using the fast marching method, Geophys J Int, 156, 631, 10.1111/j.1365-246X.2004.02153.x Sethian, 1999, Fast marching methods, SIAM Rev, 41, 199, 10.1137/S0036144598347059 COMSOL 5.6 multiphysics reference manual n.d. https://doc.comsol.com/(accessed November 3, 2021). Micro-Epsilon Messtechnik. Compact laser scanner. Micro-Epsil Messtech n.d. https://www.micro-epsilon.co.uk (accessed July 19, 2022). Çengel, 2019 Prabhu, 2018 AMD ryzen threadripper 3960X desktop processor n.d. https://www.amd.com/en/products/cpu/amd-ryzen-threadripper-3960x (accessed July 20, 2022). Laugier, 2010 Huthwaite, 2014, Accelerated finite element elastodynamic simulations using the GPU, J Comput Phys, 257, 687, 10.1016/j.jcp.2013.10.017 Ultrasonic phased array wedge for inspecting high-temperature parts n.d. https://www.olympus-ims.com/en/applications/ultrasonic-phased-array-wedge-for-inspecting-high-temperature-parts-up-to-150c/(accessed August 12, 2022). Rajagopal, 2012, On the use of absorbing layers to simulate the propagation of elastic waves in unbounded isotropic media using commercially available Finite Element packages, NDT E Int, 51, 30, 10.1016/j.ndteint.2012.04.001 Combaniere, 2019, Interaction between SH0 guided waves and tilted surface-breaking cracks in plates, IEEE Trans Ultrason Ferroelectrics Freq Control, 66, 119, 10.1109/TUFFC.2018.2876723 De Luca, 2019, Guided waves in a composite winglet structure: numerical and experimental investigations, Compos Struct, 210, 96, 10.1016/j.compstruct.2018.11.048 Ma, 2019, Axial stress monitoring strategy in arbitrary cross-section based on acoustoelastic guided waves using PZT sensors, AIP Adv, 9, 10.1063/1.5130723 MATLAB. GPU coder n.d. https://uk.mathworks.com/products/gpu-coder.html (accessed August 17, 2022). Lines, 2020, Modelling of echo amplitude fidelity for transducer bandwidth and TFM pixel resolution, 47th Annu Rev Prog Quant Nondestruct Eval, Virtual Event Kuka Kuka Industrial robots high payload catalogue n.d. https://www.kuka.com/-/media/kuka-downloads/imported/9cb8e311bfd744b4b0eab25ca883f6d3/kuka_pb_hohe_tl_en.pdf (accessed June 16 2022). Kuka KR 6 R900 n.d. https://www.kuka.com/-/media/kuka-downloads/imported/6b77eecacfe542d3b736af377562ecaa/0000205456_en.pdf (accessed August 17, 2022). ATI Industrial Automation. F/T Sensor Gamma IP65 n.d. https://www.ati-ia.com/products/ft/ft_models.aspx?id=Gamma+IP65 (accessed June 14 2022). Echo Ultrasonics. High temperature ultrasonic couplant n.d. https://www.echoultrasonics.com/product-category/high-temperature-ultrasonic-couplant/(accessed August 17, 2022).