Thermal analysis and simulation of a Li-ion battery pack for a lightweight commercial EV
Tóm tắt
Từ khóa
Tài liệu tham khảo
Wandud, 2016, Diesel demand in the road freight sector in the UK: estimates for different vehicle types, Appl Energy, 849, 10.1016/j.apenergy.2015.12.102
Zeng, 2016, Greenhouse gas emissions of motor vehicles in Chinese cities and the implication for China’s mitigation targets, Appl Energy, 184, 1016, 10.1016/j.apenergy.2016.06.130
Tente, 2011, Evaluating the efficiency of diesel particulate filters in high-duty vehicles: field operational testing in Portugal, Atmos Environ, 45, 2623, 10.1016/j.atmosenv.2011.02.069
Jung, 2016, Characterization of particulate matter from diesel passenger cars tested on chassis dynamometers, J Environ Sci
Diesel vehicle emission and death rates in Tokyo, 2011, Japan: A natural experiment, Sci Total Environ, 409, 3620
Bishop, 2016, Quantifying the role of vehicle size, powertrain technology, activity and consumer behavior on new UK passenger vehicle fleet energy use and emissions under different policy objectives, Appl Energy, 180, 196, 10.1016/j.apenergy.2016.07.111
Riesz, 2016, Quantifying the costs of a rapid transition to electric vehicles, Appl Energy, 180, 287, 10.1016/j.apenergy.2016.07.131
Miranda, 2016, A cost-efficiency and health benefit approach to improve urban air quality, Sci Total Environ, 569, 342, 10.1016/j.scitotenv.2016.06.102
Casals, 2016, Sustainability analysis of the electric vehicle use in Europe for CO2 emissions reduction, J Clean Prod, 127, 425, 10.1016/j.jclepro.2016.03.120
Batista, 2015, Vehicle environmental rating methodologies: Overview and application to light-duty vehicles, Renew Sustain Energy Rev, 45, 192, 10.1016/j.rser.2015.01.040
Noori, 2016, Light-duty electric vehicles to improve the integrity of the electricity grid through vehicle to-grid technology: analysis of regional net revenue and emissions savings, Appl Energy, 168, 146, 10.1016/j.apenergy.2016.01.030
Feng, 2013, An economic and technological analysis of the key factors affecting the competitiveness of electric commercial vehicles: a case study from the USA market, Transp Res Part C, 26, 135, 10.1016/j.trc.2012.06.007
Hu, 2016, Electric vehicle fleet management in smart grids: a review of services, optimization and control aspects, Renew Sustain Energy Rev, 56, 1207, 10.1016/j.rser.2015.12.014
Propfe, 2013, Market penetration analysis of electric vehicles in the German passenger car market towards 2030, Int J Hydrogen Energy, 38, 5201, 10.1016/j.ijhydene.2013.02.049
Bohnsack, 2014, Business models for sustainable technologies: exploring business model evolution in the case of electric vehicles, Res Policy, 43, 284, 10.1016/j.respol.2013.10.014
Dijk, 2016, The momentum of the electric car last? Testing an hypothesis on disruptive innovation, Technol Forecast Soc Change, 105, 77, 10.1016/j.techfore.2016.01.013
Tairan, 2016, Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack, Int J Therm Sci, 108, 132, 10.1016/j.ijthermalsci.2016.05.009
Cicconi, 2014, Virtual prototyping approach to evaluate the thermal management of Li-Ion batteries
Golembiewski, 2015, Identifying trends in battery technologies with regard to electric mobility: evidence from patenting activities along and across the battery value chain, J Clean Prod, 87, 800, 10.1016/j.jclepro.2014.10.034
Cicconi, 2012, Feasibility analysis of second life applications for Li-ion cells used in electric powertrain using environmental indicators
Jiao, 2016, Business models for sustainability: the case of second-life electric vehicle batteries, vol. 40, 250
Ji, 2012, Graphene/Si multilayer structure anodes for advanced half and full lithium-ion cells, Nano Energy, 1, 164, 10.1016/j.nanoen.2011.08.003
Guo, 2015, A Bayesian approach for Li-Ion battery capacity fade modeling and cycles to failure prognostics, J Power Sources, 281, 173, 10.1016/j.jpowsour.2015.01.164
Landi D, Cicconi P, Germani M. A methodological approach for supporting the thermal design of Li-ion battery for customized electric vehicles. In: 2014 ASME international mechanical engineering congress and exposition, proceedings (IMECE).
Guptaa, 2011, Sustainable supply chain management: review and research opportunities, IIMB Manage Rev, 23, 234, 10.1016/j.iimb.2011.09.002
Nelson, 2015, Cost savings for manufacturing lithium batteries in a flexible plant, J Power Sources, 283, 506, 10.1016/j.jpowsour.2015.02.142
Rao, 2010, Simulate and experimental research on air-cooled thermal energy management of lithium-ion power battery
Mahamud, 2011, Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity, J Power Sources, 196, 5685, 10.1016/j.jpowsour.2011.02.076
Feng, 2016, Online internal short circuit detection for a large format lithium ion battery, Appl Energy, 161, 168, 10.1016/j.apenergy.2015.10.019
Rao, 2011, A review of power battery thermal energy management, Renew Sustain Energy Rev, 15, 4554, 10.1016/j.rser.2011.07.096
Classification and Definition of Vehicles, ECE/TRANS/WP.29/78/Rev.4.
European Parliament and Council. “Council Directive 70/220/EEC of 20 March 1970 on the approximation of the laws of the Member States relating to measures to be taken against air pollution by gases from positive-ignition engines of motor vehicles”. 1970.
Bernardi, 1985, A general energy balance for battery system, J Electrochem Soc, 132, 5, 10.1149/1.2113792
Bandhauer TM, Garimella S. (n.d.). A critical review of thermal issues in lithium-ion batteries. J Electrochem Soc 158(3). pp. R1–R25.
Newman, 1997, Heat-generation rate and general energy balance for insertion battery systems, J Electrochem Soc, 144, 2697, 10.1149/1.1837884
Chen, 2005, Thermal analysis of lithium-ion batteries, J Power Sources, 140, 111, 10.1016/j.jpowsour.2004.05.064