Theoretical modeling of fatigue phenomenon in composite pipes

Mortazavian, 2015, Fatigue behaviour and modelling of short fiber reinforced polymer composites: a literature review, Int J Fatigue, 70, 297, 10.1016/j.ijfatigue.2014.10.005

Degrieck, 2001, Fatigue damage modeling of fibre-reinforced composite materials, Review, Appl Mech Rev, 54, 279, 10.1115/1.1381395

Vassilopoulos, 2010

Harris, 2003

Taheri-Behrooz, 2008, Residual stiffness in cross-ply laminates subjected to cyclic loading, Compos Struct, 85, 205, 10.1016/j.compstruct.2007.10.025

Shokrieh, 2006, A unified fatigue life model based on energy method, Compos Struct, 75, 444, 10.1016/j.compstruct.2006.04.041

ASTM D2992-06, 2006

ASTM D2143-00, 2000

Perreux, 1997, The effect of frequency on the fatigue performance of filament-wound pipes under biaxial loading: experimental results and damage model, Compos Sci Technol, 57, 353, 10.1016/S0266-3538(96)00155-8

Tarakcioglu, 2005, Fatigue failure behavior of glass/epoxy ±55 filament wound pipes under internal pressure, Compos Sci Technol, 65, 703, 10.1016/j.compscitech.2004.10.002

Tarakcioglu, 2007, The fatigue behavior of (±55°) filament wound GRP pipes with a surface crack under internal pressure, Compos Struct, 80, 207, 10.1016/j.compstruct.2006.05.015

Samanci, 2011, Fatigue failure analysis of surface-cracked (±45°)3 filament-wound GRP pipes under internal pressure, J Compos Mater, 46, 1041, 10.1177/0021998311414945

Samanci, 2008, Fatigue crack growth of filament wound GRP pipes with a surface crack under cyclic internal pressure, J Mater Sci, 43, 5569, 10.1007/s10853-008-2820-x

Samanci, 2012, Fatigue failure analysis of surface cracked (±45°) filament wound GRP pipes under internal pressure, J Compos Mater, 46, 1041, 10.1177/0021998311414945

Gemi, 2009, Progressive fatigue failure behavior of glass/epoxy (±75)2 filament-wound pipes under pure internal pressure, Mater Des, 30, 4293, 10.1016/j.matdes.2009.04.025

Deniz, 2013, Environmental effect on fatigue life of glass–epoxy composite pipes subjected to impact loading, Compos B, 44, 304, 10.1016/j.compositesb.2012.05.001

Sari, 2011, Residual failure pressures and fatigue life of filament-wound composite pipes subjected to lateral impact, J Compos Mater, 46, 1787, 10.1177/0021998311425717

Hawa, 2014, Ageing effects on burst pressure test of impacted glass fibre reinforcement epoxy (GRE) pipes, Appl Mech Mater, 717, 10.4028/www.scientific.net/AMM.695.717

Uyaner, 2014, Fatigue behavior of filament wound E-glass/epoxy composite tubes damaged by low velocity impact, Compos B, 61, 358, 10.1016/j.compositesb.2013.06.039

Krishnan, 2015, Effects of winding angle on the behaviour of glass/epoxy pipes under multiaxial cyclic loading, Mater Des, 88, 196, 10.1016/j.matdes.2015.08.153

Roy, 2001

Hashin, 1973, A fatigue criterion for fibre reinforced composite materials, J Compos Mater, 7, 448, 10.1177/002199837300700404

Lawrence, 1993, Thermal and mechanical fatigue analysis of CFRP laminates, Compos Struct, 25, 339, 10.1016/0263-8223(93)90180-X

Fawaz, 1994, Fatigue failure model for fibre reinforced materials under general loading conditions, J Compos Mater, 28, 1432, 10.1177/002199839402801503

Whitworth, 1987, Modeling stiffness reduction of graphite epoxy composite laminates, J Compos Mater, 21, 362, 10.1177/002199838702100405

Halpin, 1973, Characterization of composites for the purpose of reliability evaluation in analysis of the test methods for high modulus fibers and composites, ASTM STP, 521, 5

Berthelot, 2003, Transverse cracking and delamination in cross-ply glass–fiber and carbon–fiber reinforced plastic laminates: static and fatigue loading, Appl Mech Rev, 56, 111, 10.1115/1.1519557

Berthelot, 1999, Modeling the transverse cracking in cross-ply laminates: application to fatigue, Compos Part B: Eng, 30, 569, 10.1016/S1359-8368(99)00023-2

Daniel, 1986, Fatigue damage mechanisms and residual properties of graphite/epoxy laminates, Eng Fract Mech, 25, 793, 10.1016/0013-7944(86)90042-1

Halpin, 1972, Kinetic fracture models and structural reliability, Int J Fract Mech, 8, 465, 10.1007/BF00191112

Wolff RV, Lemon GH. Reliability prediction for adhesive bonds, Report AFML-TR-72–121 (Air Force Material Laboratory); 1973.

Kulkarni, 1976

Kulkarni SV, McLoughlin PV, Pipes RB Jr., Rosen BW. Fatigue of notched fiber composite laminates: analytical and experimental evaluation. In: Composite materials: testing and design (4th Conference), ASTMSTP 617; 1976. p. 70–92.

Ramkumar RL, Kulkarni SV, Pipes RB. Evaluation and expansion of an analytical model for fatigue of notched composite laminates, Technical Report 1978, NASA CR-132747, Langly Research Center.

Hwang, 1986, Fatigue of composites – fatigue modulus concept and life prediction, J Compos Mater, 20, 154, 10.1177/002199838602000203

Ye, 1989, On fatigue damage accumulation and material degradation in composite materials, Compos Sci Technol, 36, 339, 10.1016/0266-3538(89)90046-8

Whitworth, 1999, A stiffness degradation model for composite laminates under fatigue loading, Compos Struct, 40, 95, 10.1016/S0263-8223(97)00142-6

Yang, 1992, Modulus reduction and fatigue damage of matrix dominated composite laminates, Compos Struct, 21, 91, 10.1016/0263-8223(92)90044-D

Ogi, 2009, A probabilistic static fatigue model for transverse cracking in CFRP cross-ply laminates, Compos Sci Technol, 69, 469, 10.1016/j.compscitech.2008.11.023

Zhang, 2006, Variational analysis of transverse cracking and local delamination in [θm/90n]s laminates, Int J Solids Struct, 43, 7061, 10.1016/j.ijsolstr.2006.03.004

McCartney, 2008, Energy methods for fatigue damage modeling of laminates, Compos Sci Technol, 68, 2601, 10.1016/j.compscitech.2008.04.044

Reifsnider, 1983, 127

Reifsnider, 1986, The critical element model: a modeling philosophy, Eng Fract Mech, 25, 739, 10.1016/0013-7944(86)90037-8

Reifsnider KL. Damage and damage mechanics. In: Reifsnider KL, editor. Fatigue of composite materials: Elsevier Publishers B.V.; 1986. p. 11–77.

Subramanian, 1999, A cumulative damage model to predict the fatigue life of composite laminates including the effect of a fiber-matrix interphase, Int J Fatigue, 17, 343, 10.1016/0142-1123(95)99735-S

Xiong, 2004, A two-stage theory on fatigue damage and life prediction of composites, Compos Sci Technol, 64, 1331, 10.1016/j.compscitech.2003.10.006

Talreja, 1986, Stiffness properties of composite laminates with matrix cracking and interior delamination, Eng Fract Mech, 25, 751, 10.1016/0013-7944(86)90038-X

Talreja, 1985, A continuum mechanics characterization of damage in composite materials, Proc R Soc A Math Phys Sci, 39, 126

Talreja R. Damage characterization by internal variables. In: Talreja R, editor. Damage mechanics of composite materials: Elsevier Science B.V.; 1994. p. 53–78.

Allen DH, Groves SE, Harris CE. A cumulative damage model for continuous fiber composite laminates with curved matrix cracking and interply delaminations. In: Composite materials: testing and design (Eighth Conference); ASTMSTP 972; 1988. p. 57–80.

Allen, 1988, Characterization of stiffness loss in cross-ply laminates with curved matrix crack, J Compos Mater, 22, 71, 10.1177/002199838802200105

Allen DH. Damage evolution in laminates. In: Talreja R, editor. Damage mechanics of composite materials; 1994. p. 79–116.

Areias, 2016, Damage and fracture algorithm using the screened Poisson equation and local remeshing, Eng Fract Mech, 158, 116, 10.1016/j.engfracmech.2015.10.042

Rabczuk, 2004, Cracking particles: a simplified meshfree method for arbitrary evolving cracks, Int J Numer Methods Eng, 61, 2316, 10.1002/nme.1151

Rabczuk, 2007, A meshfree thin shell method for non-linear dynamic fracture, Int J Numer Methods Eng, 72, 524, 10.1002/nme.2013

Areias, 2004, Finite strain fracture of plates and shells with configurational forces and edge rotations, Int J Numer Methods Eng, 61, 2316

Shokrieh, 2000, Progressive fatigue damage modeling of composite materials, Part I: modeling, J Compos Mater, 34, 1056, 10.1177/002199830003401301

Shokrieh, 2000, Progressive fatigue damage modeling of composite materials, Part II: material characterization and model verification, J Compos Mater, 34, 1081, 10.1177/002199830003401302

Shokrieh, 2007, Generalized technique for cumulative damage modeling of composite laminated, J Compos Mater, 41, 2643, 10.1177/0021998307078718

Shokrieh, 2008, Simulation of fatigue failure in a full composite wind turbine blade, Compos Struct, 85, 205

Adam, 1989, Fatigue life prediction for hybrid composites, Int J Fatigue, 11, 233, 10.1016/0142-1123(89)90306-X

ASTM D3039/D3039M-95a, Standard Method for Tensile Properties of Polymer Matrix Composite Materials, American Society for Testing and Materials; 1995.

Gemi, 2009, Progressive fatigue failure behavior of glass/epoxy (±75)2 filament wound pipes under internal pressure, Mater Des, 30, 4293, 10.1016/j.matdes.2009.04.025

Tsai, 1980

Gay, 2003

http://www.nutek-us.com/wp-q4w.html.