Theoretical and CFD modelling of single and slug oil, water and gas flows in a deepwater rigid jumper
Tóm tắt
Từ khóa
Tài liệu tham khảo
ABS (2017) Guide for classification and certification of subsea production systems, equipment and components. https://standards.globalspec.com/std/10257953/281. Accessed 15 June 2022
American Institute Petroleum API Recommended Practice 17R (2015) Recommended practice for flowline connectors and jumpers. https://global.ihs.com/doc_detail.cfm?document_name=API%20RP%2017R&item_s_key=00646590. Accessed 23 June 2022
American Institute Petroleum API Recommended Practice 1111 (2011) Design, construction, operation and maintenance of offshore hydrocarbon pipelines, Limit state design. Fourth edition. American Petroleum Institute, Errata. http://marineman.ir/wp-content/uploads/2015/07/API-API-RP-1111-4th-Ed.-Dec.-2009-Design-Construction-Operation-and-Maintenance-of-Offshore-Hydrocarbon-Pipelines-.pdf. Accessed 15 June 2022
ANSYS Fluent Theory Guide (2011) ANSYS Inc. Southpointe 272 Technology Drive Canonsburg PA 15317. http://www.ansys.com. Accessed 28 Aug 2021
Beggs H, Brill J (1991) Pipelines biphasic flow, book, 6th edn. Tulsa University, Tulsa
Dribus John R, Loïcet H (2015) Beyond deepwaters: ultra deepwaters region challenges. Oilfield Rev 26(4):36–49
Elyyan Mohammad A, Perng Y-Y, Doan M (2014) Fluid-structure interaction modelling of subsea jumper pipe. In: Proceedings of the ASME 33rd international conference on ocean, offshore and arctic engineering OMAE2014. https://doi.org/10.1115/OMAE2014-24070
ISO 13628-1 (2005) Petroleum and natural gas industries—Design and operation of subsea production systems—Part 1: general requirements and recommendations. https://infostore.saiglobal.com/preview/is/en/2006/i.s.eniso13628-1-2005%2Ba1-2010.pdf?sku=615236. Accessed 28 Aug 2021
Koto J (2017) Subsea connection & jumper, Introduction. Ocean & Aerospace research Institute, Indonesia. https://isomase.org/OCAri/Book/Introduction%20to%20Subsea%20Connection/Introduction%20to%20Subsea%20Connection%20and%20Jumper.pdf. Accessed 23 June 2022
Leonardo C (2014) FSI Study of internal multiphase flow in subsea piping components. Master Thesis. Faculty of the Department of Mechanical Engineering Technology. University of Houston. https://uh-ir.tdl.org/bitstream/handle/10657/722/CHICA-THESIS-2014.pdf?sequence=1
Maya B, Matthieu M (2013) Riser base jumper slugging analysis by CFD simulations. In: Proceedings of the ASME 32th international conference on ocean, offshore and arctic engineering OMAE2013. https://doi.org/10.1115/OMAE2013-11335
Miriam Asiegbu N (2020) CFD Modelling of Flow induced vibration under multiphase flow regimes. PhD Thesis. School of Engineering. Robert Gordon University. https://rgu-repository.worktribe.com/OutputFile/947896. Accessed 23 June 2022
Oil & Gas Portal (2022) Oil & gas. Subsea technology and equipment. http://www.oil-gasportal.com/subsea-technology-and-equipments/. Accessed 25 June 2022
PRETechnologies (2021) The product research & engineering company. FE and CFD based analysis of spools and jumpers. http://www.pretechnologies.com/experience/spool-jumper. Accessed 25 June 2022
Rodríguez Landon F (2010) Subsea production systems. Bachelor Thesis, National Polytechnique Institute, Mexico. https://tesis.ipn.mx/jspui/bitstream/123456789/16967/1/Sistemas%20submarinos%20de%20producci%C3%B3n.pdf. Accessed 23 June 2022
Reg James B, Staci A, Bill H, Joseph H, Kruse Bernard J, Joan L, Bob S, Amy W (2000) Deepwater development: a reference document for the deepwater environmental assessment Gulf of Mexico OCS. https://www.boem.gov/sites/default/files/boem-newsroom/Library/Publications/2000/2000-015.pdf. Accessed 23 June 2022
RPSEA Research Partnership to Secure Energy for America (2011) Technology status assessment 09121-3300-02.03. Displacement & mixing in subsea jumpers—experimental data & CFD simulations, The University of Tulsa. https://data.amerigeoss.org/dataset/00455944-fdd0-4a7e-bb9e-a9739263b7cc/resource/9790c69b-0f27-435e-99ca-d6490c2301b6. Accessed 25 June 2022
Sunday N, Settar A, Chetehouna K, Gascoin N (2021) An overview of flow assurance heat management systems in subsea flowlines. Energies 14:458. https://doi.org/10.3390/en14020458
Uribe A (2012) Methodology for installation of devices. Development by SHAIP group of Mexican Institute of Petroleum, Mexico. http://www.ptolomeo.unam.mx:8080/jspui/bitstream/132.248.52.100/3647/1/Informe.pdf. Accessed 25 June 2022