The use of 3D additive manufacturing technology in autogenous dental transplantation

Springer Science and Business Media LLC - 2020
Pau Cahuana-Bartra1,2, Abel Cahuana-Cárdenas2, Lluís Brunet-Llobet3,2, Marta Ayats-Soler4, Jaume Miranda-Rius1,2,3, Alejandro Rivera-Baró2,3
1Department of Odontostomatology, Faculty of Medicine and Health Sciences, University of Barcelona, Barcelona, Spain
2Department of Pediatric Dentistry, Hospital Sant Joan de Déu, University of Barcelona, Barcelona, Spain
3Hospital Dentistry, Clinical Orthodontics and Periodontal Medicine Research Group (HDCORPEMrg), Institut de Recerca Sant Joan de Déu (IRSJD), Barcelona, Spain
4Unit of Three-Dimentional Printing (3DP), Innovation Department, Fundació Sant Joan de Déu (FSJD), Barcelona, Spain

Tóm tắt

In medicine and dentistry, 3D technology allows the virtual planning and printing of surgical replicas of anatomical structures that can facilitate certain transplant procedures. In dentistry, 3D technology is useful in autogenous tooth transplantation. We present a clinical case of an ectopic mandibular second premolar, describing the preoperative planning with dental replicas and the autotransplantation surgery. 3D prints of the surgical replica of the tooth to be transplanted was made using an Objet30 Prime® Printer, PolyJet. Clinical controls performed at 3, 6 and 12 months indicated the satisfactory evolution of the transplanted tooth. 3D additive manufacturing technology allows the preparation of a new recipient socket with the aid of a surgical replica of the tooth to be transplanted, thus minimizing handling and extraoral time.

Từ khóa


Tài liệu tham khảo

Thilander B, Myrberg N. The prevalence of malocclusion in Swedish school children. Scand J Dent Res. 1978;81:12–21. https://doi.org/10.1111/j.1600-0722.1973.tb01489.x.

Burch J, Ngan P, Hackman A. Diagnosis and treatment planning for unerupted premolars. Pediatr Dent. 1994;16:89–95.

Shah RM, Boyd MA, Vakil TF. Studies of permanent tooth anomalies in 7886 Canadian individuals. I: impacted teeth. Dent J. 1978;44:262–4.

Garn SM. Genetics of dental development. In: McNamara Jr JA, editor. The biology of occlusal development. Ann Arbor: Center for Human Growth and Development; 1977. p. 61–88.

Andreasen JO, Kølsen Petersen J, Laskin DM, editors. Textbook and color atlas of tooth impactions: diagnosis, treatment, prevention. Copenhagen: Munksgaard; 1997. p. 126–65.

Garib DG, Peck S, Gomes SC. Increased occurrence of dental anomalies associated with second-premolar agenesis. Angle Orthod. 2009;79:436–41.

Baccetti T, Leonardi M, Giuntini V. Distally displaced premolars: a dental anomaly associated with palatally displaced canines. Am J Orthod Dentofac Orthop. 2010;138:318–22. https://doi.org/10.1016/j.ajodo.2008.09.036.

Peck S. Dental anomaly patterns (DAP) A new way to look at malocclusion. Angle Orthod. 2009;79(5):1015–6. https://doi.org/10.2319/0003-3219-079.005.1015.

Navarro J, Cavaller M, Luque E, Tobella ML, Rivera A. Dental anomaly pattern (DAP): agenesis of mandibular second premolar, distal angulation of its antimere and delayed tooth formation. Angle Orthod. 2014;8:24–9. https://doi.org/10.2319/030513-183.1.

Anssari Moin D, Derksen W, Verweij JP, van Merkesteyn R, Wismeijer D. A novel approach for computer-assisted template-guided autotransplantation of teeth with custom 3D designed/printed surgical tooling. An ex vivo proof of concept. J Oral Maxillofac Surg. 2016;74:895–902. https://doi.org/10.1016/j.joms.2016.01.033.

Lee SJ, Jung IY, Lee CY, Choi SY, Kum KY. Clinical application of computer-aided rapid prototyping for tooth transplantation. Dent Traumatol. 2001;17:114–9. https://doi.org/10.1034/j.1600-9657.2001.017003114.x.

Wolfaardt J, King B, Bibb RJ, Verdonck H, de Cubber J, Sensen CW, Soh J. Digital technology in maxillofacial rehabilitation. In: Beumer J, Esposito S, Marunick M (eds). Maxillofacial rehabilitation: prosthodontic and surgical management of cancer-related, acquired and congenital defects of the head and neck. Hanover Park, Illinois: Quintessence Publishing; 2011. p. 355–73.

Quadri S, Kapoor B, Singh G, Tewari RK. Rapid prototyping: an innovative technique in dentistry. J Oral Res Rev. 2017;9:96–102.

Winder J, Bibb R. Medical rapid prototyping technologies: state of the art and current limitations for application in oral and maxillofacial surgery. J Oral Maxillofac Surg. 2005;63:1006–15. https://doi.org/10.1016/j.joms.2005.03.016.

3D Hubs. https://www.3dhubs.com/knowledge-base/collection/material-processes-explained/. Accessed 18 Apr 2020.

Ismail MQ, Lauridsen E, Andreasen JO, Hermann NV. Ectopic eruption of the second premolar: an analysis of four different treatment approaches. Eur Arch Paediatr Dent. 2020;21:119–27. https://doi.org/10.1007/s40368-019-00459-z.

Kafourou V, Tong HJ, Day P, Houghton N, Spencer RJ, Duggal M. Outcomes and prognostic factors that influence the success of tooth autotransplantation in children and adolescents. Dent Traumatol. 2017;33:393–9. https://doi.org/10.1007/s40368-019-00459-z.

Rohof ECM, Kerdijk W, Jansma J, Livas C, Ren Y. Autotransplantation of teeth with incomplete root formation: a systematic review and meta-analysis. Clin Oral Investig. 2018;22:1613–24. https://doi.org/10.1007/s00784-018-2408-z.

Chung WC, Tu YK, Lin YH, Lu HK. Outcomes of autotransplanted teeth with complete root formation: a systematic review and meta-analysis. J Clin Periodontol. 2014;41:412–23. https://doi.org/10.1111/jcpe.12228.

Brunet-Llobet L, Lahor-Soler E, Miranda-Rius J. Replantation of an avulsed tooth after one day of storage in adverse extraoral dry conditions: acceptable outcome after a 10-year follow-up. Quintessence Int. 2018;49:25–31. https://doi.org/10.3290/j.qi.a39268.

Watanabe Y, Mohri T, Takeyama M, Yamaki M, Okiji T, Saito C, Saito I. Long-term observation of autotransplanted teeth with complete root formation in orthodontic patients. Am J Orthod Dentofac Orthop. 2010;138:720–6. https://doi.org/10.1016/j.ajodo.2009.03.043.

Czochrowska EM, Stenvik A, Bjercke B, Zachrisson BU. Outcome of tooth transplantation: survival and success rates 17–41 years posttreatment. Am J Orthod Dentofac Orthop. 2002;121:110–9. https://doi.org/10.1067/mod.2002.119979.

Mensink G, van Merkesteyn R. Autotransplantation of premolars. Br Dent J. 2010;13:109–11. https://doi.org/10.1038/sj.bdj.2010.102.

Tsukiboshi M. (2002) autotransplantation of teeth: requirements for predictable success. Dent Traumatol. 2002;18:157–80. https://doi.org/10.1034/j.1600-9657.2002.00118.x.

Hupp JG, Mesaros SV, Aukhil I, Trope M. Periodontal ligament vitality and histologic healing of teeth stored for extended periods before transplantation. Endod Dent Traumatol. 1998;14:79–83. https://doi.org/10.1111/j.1600-9657.1998.tb00815.x.

Andreasen JO. Interrelation between alveolar bone and periodontal ligament repair after replantation of mature permanent incisors in monkeys. J Periodontal Res. 1981;16:228–35. https://doi.org/10.1111/j.1600-0765.1981.tb00970.x.

Nethander G. Oral restoration with fixed partial dentures on transplanted abutment teeth. Int J Prosthodont. 1995;8:517–26.

Schwartz O, Bergmann P, Klausen B. Autotransplantation of human teeth. A life-table analysis of prognostic factors. Int J Oral Surg. 1985;14:245–58. https://doi.org/10.1016/s0300-9785(85)80036-3.

Hinckfuss SE, Messer LB. Splinting duration and periodontal outcomes for replanted avulsed teeth: a systematic review. Dent Traumatol. 2009;25:150–7. https://doi.org/10.1111/j.1600-9657.2008.00761.x.

Bauss O, Schilke R, Fenske C, Engelke W, Kiliaridis S. Autotransplantation of immature third molars: influence of different splinting methods and fixation periods. Dent Traumatol. 2002;18:322–8. https://doi.org/10.1034/j.1600-9657.2002.00147.x.

Bauss O, Schwestka-Polly R, Schilke R, Kiliaridis S. Effect of different splinting methods and fixation periods on root development of autotransplanted immature third molars. J Oral Maxillofac Surg. 2005;63:304–10. https://doi.org/10.1016/j.joms.2004.06.056.

Andreasen JO, Paulsen HU, Yu Z, Schwartz O. A long-term study of 370 autotransplanted premolars. Part III. Periodontal healing subsequent to transplantation. Eur J Orthod. 1990;12:25–37. https://doi.org/10.1093/ejo/12.1.25.

Boyd DH, Kinirons MJ, Gregg TA. A prospective study of factors affecting survival of replanted permanent incisors in children. Int J Paediatr Dent. 2000;10:200–5. https://doi.org/10.1046/j.1365-263x.2000.00192.x.

Verweij JP, van Westerveld KJH, Anssari Moin D, Mensink G, van Merkesteyn JPR. Autotransplantation with a 3-dimensionally printed replica of the donor tooth minimizes extra-alveolar time and intraoperative fitting attempts: a multicenter prospective study of 100 transplanted teeth. J Oral Maxillofac Surg. 2020;78:35–43. https://doi.org/10.1016/j.joms.2019.08.005.

Kim E, Jung JY, Cha IH, Kum KY, Lee SJ. Evaluation of the prognosis and causes of failure in 182 cases of autogenous tooth transplantation. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2005;100:112–9. https://doi.org/10.1016/j.tripleo.2004.09.007.

Harzer W, Ruger D, Tausche E. Autotransplantation of first premolar to replace a maxillary incisor—3D-volume tomography for evaluation of the periodontal space. Dent Traumatol. 2009;25:233–7. https://doi.org/10.1111/j.1600-9657.2008.00733.x.

Honda M, Uehara H, Uehara T, Honda K, Kawashima S, Honda K, Yonehara Y. Use of a replica graft tooth for evaluation before autotransplantation of a tooth. A CAD/CAM model produced using dental-cone-beam computed tomography. Int J Oral Maxillofac Surg. 2010;39:1016–9. https://doi.org/10.1016/j.ijom.2010.06.002.

Keightley AJ, Cross DL, McKerlie RA, Brocklebank L. Autotransplantation of an immature premolar, with the aid of cone beam CT and computer-aided prototyping: a case report. Dent Traumatol. 2010;26:195–9. https://doi.org/10.1111/j.1600-9657.2009.00851.x.

Pang NS, Choi YK, Kim KD, Park W. Autotransplantation of an ectopic impacted premolar with sinus lift and allogenic bone graft. Int Endod J. 2011;44:967–75. https://doi.org/10.1111/j.1365-2591.2011.01902.x.

Lee SJ, Kim E. Minimizing the extra-oral time in autogeneous tooth transplantation: use of computer-aided rapid prototyping (CARP) as a duplicate model tooth. Restor Dent Endod. 2012;37:136–41. https://doi.org/10.5395/rde.2012.37.3.136.

Park YS, Jung MH, Shon WJ. Autotransplantion of a displaced mandibular second premolar to its normal position. Am J Orthod Dentofac Orthop. 2013;143:274–80. https://doi.org/10.1016/j.ajodo.2011.11.025.

Jang JH, Lee SJ, Kim E. Autotransplantation of immature third molars using a computer aided rapid prototyping model: a report of 4 cases. J Endod. 2013;39:1461–6. https://doi.org/10.1016/j.joen.2013.06.026.

Shahbazian M, Jacobs R, Wyatt J, Denys D, Lambrichts I, Vinckier F, Willems G. Validation of the cone beam computed tomography-based stereolithographic surgical guide aiding autotransplantation of teeth: clinical case–control study. Oral Surg Oral Med Oral Pathol Oral Radiol. 2013;115:667–75. https://doi.org/10.1016/j.oooo.2013.01.025.

Lee Y, Chang SW, Perinpanayagam H, Yoo YJ, Lim SM, Oh SR, Gu Y, Ahn SJ, Kum KY. Autotransplantation of mesiodens for missing maxillary lateral incisor with cone-beam CT-fabricated model and orthodontics. Int Endod J. 2014;47:896–904. https://doi.org/10.1111/iej.12223.

Park JM, Tatad JC, Landayan ME, Heo SJ, Kim SJ. Optimizing third molar autotransplantation: applications of reverse-engineered surgical templates and rapid prototyping of three-dimensional teeth. J Oral Maxillofac Surg. 2014;72:1653–9. https://doi.org/10.1016/j.joms.2014.04.012.

Vandekar M, Fadia D, Vaid NR, Doshi V. Rapid prototyping as an adjunct for autotransplantation of impacted teeth in the esthetic zone. J Clin Orthod. 2015;49:711–5.

Van der Meer WJ, Jansma J, Delli K, Livas C. Computer-aided planning and surgical guiding system fabrication in premolar autotransplantation: a 12-month follow up. Dent Traumatol. 2016;32:336–40. https://doi.org/10.1111/edt.12253.

Verweij JP, Moin DA, Mensink G, Nijkamp P, Wismeijer D, van Merkesteyn JP. Autotransplantation of premolars with a 3-dimensional printed titanium replica of the donor tooth functioning as a surgical guide: proof of concept. J Oral Maxillofac Surg. 2016;74:1114–9. https://doi.org/10.1016/j.joms.2016.01.030.

Cousley RRJ, Gibbons A, Nayler J. A 3D printed surgical analogue to reduce donor tooth trauma during autotransplantation. J Orthod. 2017;44:287–93. https://doi.org/10.1080/14653125.2017.1371960.

Kim K, Choi HS, Pang NS. Clinical application of 3D technology for tooth autotransplantation: a case report. Aust Endod J. 2019;45:122–8. https://doi.org/10.1111/aej.12260.

Xia JJ, Ge ZY, Fu XH, Zhang YZ. Autotransplantation of third molars with completely formed roots to replace compromised molars with the computer-aided rapid prototyping. J Esthet Restor Dent. 2020;16:1–7. https://doi.org/10.1111/aej.12260.

Mertens B, Boukari A, Tenenbaum H. Long-term follow up of post-surgical tooth autotransplantation: a retrospective study. J Investig Clin Dent. 2006;7:207–14. https://doi.org/10.1111/jicd.12126.

Andreasen JO, Hakansson L, Buckhoj P. Atlas of replantation and transplantation of teeth. Philadelphia: Saunders; 1992. p. 257–76.

Thông tin
Thông tin xuất bản

Springer Science and Business Media LLC

Thông tin tác giả