The performance of textured surface in friction reducing: A review

Hu B. Calculation of friction and wear and study and development of expert system. South China University of Technology. PhD dissertation. 2019. Holmberg, 2017, Influence of tribology on global energy consumption, costs and emissions, Friction, 5, 263, 10.1007/s40544-017-0183-5 Wu, 2021, Tribological characteristics and advanced processing methods of textured surfaces: a review, Int J Adv Manuf Technol, 114, 1241, 10.1007/s00170-021-06954-2 Dean, 2010, Shark-skin surfaces for fluid-drag reduction in turbulent flow: a review, Philos Trans R Soc A Math, Phys Eng Sci, 368, 4775, 10.1098/rsta.2010.0201 Greiner, 2015, Bio-inspired scale-like surface textures and their tribological properties, Bioinspiration Biomim, 10, 10.1088/1748-3190/10/4/044001 Johannes, 2017, Laser textured surfaces for mixed lubrication: influence of aspect ratio, textured area and dimple arrangement, Lubricants, 5 Hua, 2017, Experimental analysis of grease friction properties on sliding textured surfaces, Lubricants, 5, 10.3390/lubricants5040042 Babu, 2020, Experimental investigation on effects of positive texturing on friction and wear reduction of piston ring/cylinder liner system, Mater Today: Proc, 24, 1112 Wang, 2020, Observation and experimental investigation on cavitation effect of friction pair surface texture, Lubr Sci, 32, 404, 10.1002/ls.1520 Babu, 2020, Experimental and numerical studies of positive texture effect on friction reduction of sliding contact under mixed lubrication, ARCHIVE Proc Inst Mech Eng Part J J Eng Tribology, 208–210, 1994 Lu, 2018, Dynamic pressure lubrication and anti-friction characteristics of the working surface of the cemented carbide with triangular grooved micro-texture, Tribology, 38, 537 Li, 2014, Friction and wear performance of laser peen textured surface under starved lubrication, Tribology Int, 77, 97, 10.1016/j.triboint.2014.04.017 Segu, 2013, The effect of multi-scale laser textured surface on lubrication regime, Appl Surf Sci, 270, 58, 10.1016/j.apsusc.2012.12.068 Usman, 2016, Optimizing the tribological performance of textured piston ring–liner contact for reduced frictional losses in SI engine: warm operating conditions, Tribology Int, 99, 224, 10.1016/j.triboint.2016.03.030 Zhang, 2016, A mixed lubrication model for studying tribological behaviors of surface texturing, Tribology Int, 93, 583, 10.1016/j.triboint.2015.03.027 Bijani, 2018, The influence of surface texturing on the frictional behaviour of parallel sliding lubricated surfaces under conditions of mixed lubrication, Lubricants, 6, 10.3390/lubricants6040091 Zhang, 2017, Optimization of texture shape based on Genetic Algorithm under unidirectional sliding, Tribology Int, 115, 222, 10.1016/j.triboint.2017.05.017 Lu, 2017, The use of anisotropic texturing for control of directional friction, Tribology Int, 113, 169, 10.1016/j.triboint.2017.02.005 Yu, 2011, The effect of dimple shapes on friction of parallel surfaces, Proc Inst Mech Eng, Part J: J Eng Tribology, 225, 693, 10.1177/1350650111406045 Ullah, 2021, Effect of dimple shape and depth on tribological performance of textured surface, 2021 Int Bhurban Conf Appl Sci Technol (IBCAST) IEEE, 719, 10.1109/IBCAST51254.2021.9393183 Qiu, 2013, The effect of texture shape on the friction coefficient and stiffness of gas-lubricated parallel slider bearings, Tribology Int, 67, 278, 10.1016/j.triboint.2013.08.004 Lu, 2018, A novel surface texture shape for directional friction control, Tribology Lett, 66, 1, 10.1007/s11249-018-0995-0 Manser, 2020, Texture shape effects on hydrodynamic journal bearing performances using mass-conserving numerical approach, Tribology-Mater, Surf Interfaces, 14, 33, 10.1080/17515831.2019.1666232 Nanbu, 2008, Micro-Textures in Concentrated Conformal-Contact Lubrication: Effects of Texture Bottom Shape and Surface Relative Motion, Tribology Lett, 29, 241, 10.1007/s11249-008-9302-9 Ji, 2014, Tribological properties of 45 steel surface with V-grooves, China Surf Eng, 27, 107 Vladescu, 2016, Combined friction and wear reduction in a reciprocating contact through laser surface texturing, Wear, 358–359, 51, 10.1016/j.wear.2016.03.035 Borghi, 2008, Tribological effects of surface texturing on nitriding steel for high-performance engine applications, Wear, 265, 1046, 10.1016/j.wear.2008.02.011 Gropper, 2016, Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings, Tribology Int, 94, 509, 10.1016/j.triboint.2015.10.009 Hou, 2020, Optimization of performance parameters and mechanism of bionic texture on friction surface, Coatings, 10, 171, 10.3390/coatings10020171 Ibatan, 2015, Recent development on surface texturing in enhancing tribological performance of bearing sliders, Surf Coat Technol, 272, 102, 10.1016/j.surfcoat.2015.04.017 Ryk, 2006, Testing piston rings with partial laser surface texturing for friction reduction, Wear, 261, 792, 10.1016/j.wear.2006.01.031 Mao, 2020, Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A review, J Manuf Process, 53, 153, 10.1016/j.jmapro.2020.02.009 Shi, 2017, Surface texturing on SiC by multiphase jet machining with microdiamond abrasives, Mater Manuf Process, 33, 1415, 10.1080/10426914.2017.1401723 Zimmerman, 2008, Fabrication and tribological properties of titanium nitride coatings incorporating solid lubricant micro-reservoirs, Surf Coat Technol, 202, 2023, 10.1016/j.surfcoat.2007.08.038 Jain, 2020, Surface properties and bacterial behavior of micro conical dimple textured Ti6Al4V surface through micro-milling, Surf Interfaces, 21 Davim, 2012 Arizmendi, 2019, Modelling of elliptical dimples generated by five-axis milling for surface texturing, Int J Mach Tools Manuf, 137, 79, 10.1016/j.ijmachtools.2018.10.002 Pei, 2016, Effects of surface texture on the lubrication performance of the floating ring bearing, Tribology Int, 102, 143, 10.1016/j.triboint.2016.05.014 Varenberg, 2002, Different aspects of the role of wear debris in fretting wear, Wear, 252, 902, 10.1016/S0043-1648(02)00044-3 Volchok, 2002, The effect of surface regular microtopography on fretting fatigue life, Wear, 253, 509, 10.1016/S0043-1648(02)00148-5 Wang, 2014, Use of structured surfaces for friction and wear control on bearing surfaces, Surf Topogr Metrol Prop, 2, 10.1088/2051-672X/2/4/043001 Rosenkranz, 2019, Influence of surface texturing on hydrodynamic friction in plane converging bearings - an experimental and numerical approach, Tribology Int, 134, 190, 10.1016/j.triboint.2019.01.042 Davim, 2011 Xing, 2013, Effect of laser surface texturing on Si3N4/TiC ceramic sliding against steel under dry friction, Mater Des, 52, 234, 10.1016/j.matdes.2013.05.077 Rosenkranz, 2014, Alignment and wear debris effects between laser-patterned steel surfaces under dry sliding conditions, Wear, 318, 49, 10.1016/j.wear.2014.06.016 Bathe, 2014, Laser surface texturing of gray cast iron for improving tribological behavior, Appl Phys A, 117, 117, 10.1007/s00339-014-8281-y Niu, 2021, The friction and wear behavior of laser textured surfaces in non-conformal contact under starved lubrication, Wear, 476, 10.1016/j.wear.2021.203723 Wu, 2012, Tribological behavior of textured cemented carbide filled with solid lubricants in dry sliding with titanium alloys, Wear, 292–293, 135, 10.1016/j.wear.2012.05.021 Xing, 2017, High friction and low wear properties of laser-textured ceramic surface under dry friction, Opt Laser Technol, 93, 24, 10.1016/j.optlastec.2017.01.032 Dunn, 2015, Laser surface texturing for high friction contacts, Appl Surf Sci, 357, 2313, 10.1016/j.apsusc.2015.09.233 Yagi, 2021, Impact of textured surfaces in starved hydrodynamic lubrication, Tribology Int, 154 Zouzoulas, 2017, 3-D thermohydrodynamic analysis of textured, grooved, pocketed and hydrophobic pivoted-pad thrust bearings, Tribology Int, 110, 426, 10.1016/j.triboint.2016.10.001 Kovalchenko, 2004, The effect of laser texturing of steel surfaces and speed-load parameters on the transition of lubrication regime from boundary to hydrodynamic, Tribology Trans, 47, 299, 10.1080/05698190490440902 Vladescu, 2015, The effects of surface texture in reciprocating contacts – an experimental study, Tribology Int, 82, 28, 10.1016/j.triboint.2014.09.015 Li, 2018, Effect of laser surface texture on CuSn6 bronze sliding against PTFE material under dry friction, Tribology Int, 118, 37, 10.1016/j.triboint.2017.09.007 Schuh, 2016, Asymmetric surface textures decrease friction with Newtonian fluids in full film lubricated sliding contact, Tribology Int, 97, 490, 10.1016/j.triboint.2016.01.016 Wang, 2016, Experimental study on the tribological performance of fractal-like textured surface under mixed lubrication conditions, Surf Coat Technol, 307, 220, 10.1016/j.surfcoat.2016.08.071 Xu, 2017, Fabrication and tribological characterization of laser textured boron cast iron surfaces, Surf Coat Technol, 313, 391, 10.1016/j.surfcoat.2017.02.005 Shinkarenko, 2009, The effect of surface texturing in soft elasto-hydrodynamic lubrication, Tribology Int, 42, 284, 10.1016/j.triboint.2008.06.008 Suh, 2010, Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction, Tribology Int, 43, 1508, 10.1016/j.triboint.2010.02.012 SedlacEk, 2017, Influence of geometry and the sequence of surface texturing process on tribological properties, Tribology Int, 115, 268, 10.1016/j.triboint.2017.06.001 Lin, 2016, Surface texturing-plasma nitriding duplex treatment for improving tribological performance of aisi 316 stainless steel, Materials, 9, 875, 10.3390/ma9110875 Davim, 2010, Surface Integrity in Machining Hsu, 2016, Self-adaptive surface texture design for friction reduction across the lubrication regimes, Surf Topogr Metrol Prop, 4, 10.1088/2051-672X/4/1/014004 Hao, 2018, Cutting performance of carbide tools with hybrid texture, Int J Adv Manuf Technol, 97, 3547, 10.1007/s00170-018-2188-2 Segu, 2015, Friction control by multi-shape textured surface under pin-on-disc test, Tribology Int, 91, 111, 10.1016/j.triboint.2015.06.028 Segu, 2016, Effectiveness of multi-shape laser surface texturing in the reduction of friction under lubrication regime, Ind Lubr Tribology, 68, 116, 10.1108/ILT-03-2015-0041 Kango, 2020, Implication of surface texture and slip on hydrodynamic fluid film bearings: a comprehensive survey, Tribology Online, 15, 265, 10.2474/trol.15.265 Arif, 2020, Analysis of textured journal bearing with slip boundary condition and pseudoplastic lubricants, Int J Mech Sci, 228 Wang, 2019, Effect of the interfacial slippage on the moving surface in a hydrodynamic step bearing, J Mod Mech Eng Technol, 6, 40 Zhang, 2015, An improved hydrodynamic journal bearing with the boundary slippage, Mecc: J Ital Assoc Theor Appl Mech, 50, 25, 10.1007/s11012-014-0064-1 Hu, 2017, Preparation and tribology performance of bio-based ceramic particles from rice waste, 39 Liravi, 2020, A comprehensive review on recent advances in superhydrophobic surfaces and their applications for drag reduction, Prog Org Coat, 140 Polajnar, 2014, The wetting of steel, DLC coatings, ceramics and polymers with oils and water: the importance and correlations of surface energy, surface tension, contact angle and spreading, Appl Surf Sci, 293, 97, 10.1016/j.apsusc.2013.12.109 Tauviqirrahman, 2013, Combined effect of texturing and boundary slippage in lubricated sliding contacts, Tribology Int, 66, 274, 10.1016/j.triboint.2013.05.014 Rao, 2012, Analysis of slider and journal bearing using partially textured slip surface, Tribology Int, 56, 121, 10.1016/j.triboint.2012.06.010