The influence of the chemical composition of hydrogels on their behavior in cementitious materials

Snoeck D, Jensen OM, De Belie N (2015) The influence of superabsorbent polymers on the autogenous shrinkage properties of cement pastes with supplementary cementitious materials. Cem Concr Res 74:59–67. https://doi.org/10.1016/j.cemconres.2015.03.020 de Sensale GR, Goncalves AF (2014) Effects of fine LWA and SAP as internal water curing agents. Int J Concr Struct Mater 8:229–238. https://doi.org/10.1007/s40069-014-0076-1 Jensen OM, Hansen PF (2002) Water-entrained cement-based materials II. Experimental observations. Cem Concr Res 32:973–978 https://doi.org/10.1016/S0008-8846(02)00737-8 Kovler K, Jensen OM (2007) Internal curing of concrete, state-of-the-art report of RILEM technical committee 196-ICC Schröfl C, Mechtcherine V, Gorges M (2012) Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage. Cem Concr Res 42:865–873. https://doi.org/10.1016/j.cemconres.2012.03.011 Lura P, Jensen OM, Weiss WJ (2009) Cracking in cement paste induced by autogenous shrinkage 1089–1099. https://doi.org/10.1617/s11527-008-9445-z Hossain AB, Weiss J (2004) Assessing residual stress development and stress relaxation in restrained concrete ring specimens 26:531–540.https://doi.org/10.1016/S0958-9465(03)00069-6 Mechtcherine V, Gorges M, Schroefl C, Assmann A, Brameshuber W, Ribeiro AB, Cusson D, Custodio J, da Silva EF, Ichimiya K, Igarashi S, Klemm A, Kovler K, Lopez AND, Lura P, Nguyen T, Reinhardt HW, Toledo RD, Weiss J, Wyrzykowski M, Ye G, Zhutovsky S(2014) Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test. Mater Struct 541–562. https://doi.org/10.1617/s11527-013-0078-5 Jensen OM, Hansen PF (2001) Water-entrained cement-based materials I . Principles and theoretical background. Cem Concr Res 31:647–654 Lura P, Jensen OM, van Breugel K (2003) Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms. Cem Concr Res 33:223–232. https://doi.org/10.1016/S0008-8846(02)00890-6 Wang K, Jansen DC, Shah SP, Karr AF (1997) Permeability study of cracked concrete. Cem Concr Res 27:381–393 Beushausen H, Gillmer M, Alexander M (2014) The influence of superabsorbent polymers on strength and durability properties of blended cement mortars. Cem Concr Compos 52:73–80. https://doi.org/10.1016/j.cemconcomp.2014.03.008 Hasholt MT, Jensen OM (2015) Chloride migration in concrete with superabsorbent polymers. Cem Concr Compos 55:290–297. https://doi.org/10.1016/j.cemconcomp.2014.09.023 Mechtcherine V, Secrieru E, Schröfl C (2015) Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars—Development of yield stress and plastic viscosity over time. Cem Concr Res 67:52–65. https://doi.org/10.1016/j.cemconres.2014.07.003 Snoeck D, Schaubroeck D, Dubruel P, De Belie N (2014) Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.50. Constr Build Mater 72:148–157. https://doi.org/10.1016/j.conbuildmat.2014.09.012 Montanari L, Suraneni P, Weiss WJ (2017) Accounting for water stored in superabsorbent polymers in increasing the degree of hydration and reducing the shrinkage of internally cured cementitious mixtures. Adv Civ Eng Mater 6:20170098. https://doi.org/10.1520/ACEM20170098 Krafcik MJ, Erk KA (2016) Characterization of superabsorbent poly (sodium-acrylate acrylamide) hydrogels and influence of chemical structure on internally cured mortar. Mater Struct 49:4765–4778. https://doi.org/10.1617/s11527-016-0823-7 Soliman AM, Nehdi ML (2011) Effect of drying conditions on autogenous shrinkage in ultra-high performance concrete at early-age. Mater Struct 44:879–899. https://doi.org/10.1617/s11527-010-9670-0 Cusson D, Hoogeveen T (2008) Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking. Cem Concr Res 38:757–765. https://doi.org/10.1016/j.cemconres.2008.02.001 Şahmaran M, Lachemi M, Hossain KMA, Li VC (2009) Internal curing of engineered cementitious composites for prevention of early age autogenous shrinkage cracking. Cem Concr Res 39:893–901. https://doi.org/10.1016/j.cemconres.2009.07.006 Bentur A, Igarashi S, Kovler K (2001) Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregates. Cem Concr Res 31:1587–1591. https://doi.org/10.1016/S0008-8846(01)00608-1 Mechtcherine V, Reinhardt H-W (2012) Application of Super Absorbent Polymers (SAP) in concrete construction, Springer Jensen OM, Lura P (2006) Techniques and materials for internal water curing of concrete. Mater Struct Constr 39:817–825. https://doi.org/10.1617/s11527-006-9136-6 Hasholt MT, Jensen OM, Kovler K, Zhutovsky S (2012) Can superabsorent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength? Constr Build Mater 31:226–230. https://doi.org/10.1016/j.conbuildmat.2011.12.062 Lura P, Durand F, Loukili A, Kovler K (2006) Compressive strength of cement pastes and mortars with superabsorbent polymers. In: Int. RILEM Conf. Vol. Chang. Hardening Concr. Test. Mitig. 20–23 August, 2006: pp 117–125. https://doi.org/10.1617/2351580052.013 Igarashi S, Watanabe A, Jensen OM, Lura P, Kovler K (2006) Experimental study on prevention of autogenous deformation by internal curing using super-absorbent polymer particles. In: Jensen OM, Lura P, Kovler K (eds) RILEM Publications, Gabneus (France), 2006: pp 77–86. https://doi.org/10.1617/2351580052.009 Mönnig S, Lura P (2007) Superabsorbent polymers—an additive to increase the freeze-thaw resistance of high strength concrete. Adv Constr Mater 351–358. https://doi.org/10.1007/978-3-540-72448-3_35 Snoeck D, Steuperaert S, Van Tittelboom K, Dubruel P, De Belie N (2012) Visualization of water penetration in cementitious materials with superabsorbent polymers by means of neutron radiography. Cem Concr Res 42:1113–1121. https://doi.org/10.1016/j.cemconres.2012.05.005 Lee HXD, Wong HS, Buenfeld NR (2016) Self-sealing of cracks in concrete using superabsorbent polymers. Cem Concr Res 79:194–208. https://doi.org/10.1016/j.cemconres.2015.09.008 Mignon A, Graulus GJ, Snoeck D, Martins J, De Belie N, Dubruel P, Van Vlierberghe S (2014) pH-sensitive superabsorbent polymers: a potential candidate material for self-healing concrete. J Mater Sci 50:970–979. https://doi.org/10.1007/s10853-014-8657-6 Pourjavadi A, Fakoorpoor SM, Hosseini P, Khaloo A (2013) Interactions between superabsorbent polymers and cement-based composites incorporating colloidal silica nanoparticles. Cem Concr Compos 37:196–204. https://doi.org/10.1016/j.cemconcomp.2012.10.005 Farzanian K, Pimenta Teixeira K, Perdiago Rocha I, De Sa Carneiro L, Ghahremaninezhad A (2016) The mechanical strength, degree of hydration, and electrical resistivity of cement pastes modified with superabsorbent polymers. Constr Build Mater 109:156–165. https://doi.org/10.1016/j.conbuildmat.2015.12.082 Wehbe Y, Ghahremaninezhad A (2017) Combined effect of shrinkage reducing admixtures (SRA) and superabsorbent polymers (SAP) on the autogenous shrinkage and properties of cementitious materials. Constr Build Mater 138:151–162. https://doi.org/10.1016/j.conbuildmat.2016.12.206 Hasholt MT, Jesperson MHS, Jensen OM (2010) Mechanical properties of concrete with SAP part I: Development of compressive strength. In: Jensen OM, Hasholt MT, Laustsen S (eds) Int. RILEM Publications SARL, RILEM Conf. Use Superabsorbent Polym. Other New Addit. Concr., pp 117–126 Esteves LP (2011) Superabsorbent polymers: On their interaction with water and pore fluid. Cem Concr Compos 33:717–724. https://doi.org/10.1016/j.cemconcomp.2011.04.006 Zhu Q, Barney CW, Erk KA (2015) Effect of ionic crosslinking on the swelling and mechanical response of model superabsorbent polymer hydrogels for internally cured concrete. Mater Struct 48:2261–2276. https://doi.org/10.1617/s11527-014-0308-5 Horkay F, Tasaki I, Basser PJ (2000) Osmotic swelling of polyacrylate hydrogels in physiological salt solutions. Biomacromol 1:84–90. https://doi.org/10.1021/bm9905031 Siriwatwechakul W, Siramanont J, Vichit-Vadakan W (2012) Behavior of superabsorbent polymers in calcium- and sodium-rich solutions. J Mater Civ Eng 24:976–980. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000449 Farzanian K, Ghahremaninezhad A (2018) On the effect of chemical composition on the desorption of superabsorbent hydrogels in contact with a porous cementitious material. Gels 4:70. https://doi.org/10.1617/s11527-017-1068-9 Vafaei B, Farzanian K, Ghahremaninezhad A (2020) The influence of superabsorbent polymer on the properties of alkali-activated slag pastes. Constr Build Mater 236:117525. https://doi.org/10.1016/j.conbuildmat.2019.117525 Krafcik MJ, Macke ND, Erk KA (2017) Improved concrete materials with hydrogel-based internal curing agents. Gels 3:46. https://doi.org/10.3390/gels3040046 Krafcik MJ, Bose B, Erk KA (2018) Synthesis and characterization of polymer-silica composite hydrogel particles and influence of hydrogel composition on cement paste microstructure. Adv Civ Eng Mater 7:590–613. https://doi.org/10.1520/ACEM20170144 Schroefl C, Mechtcherine V, Vontobel P, Hovind J, Lehmann E (2015) Sorption kinetics of superabsorbent polymers (SAPs) in fresh Portland cement-based pastes visualized and quantified by neutron radiography and correlated to the progress of cement hydration. Cem Concr Res 75:1–13. https://doi.org/10.1016/j.cemconres.2015.05.001 Snoeck D, Velasco LF, Mignon A, Van Vlierberghe S, Dubruel P, Lodewyckx P, De Belie N (2015) The effects of superabsorbent polymers on the microstructure of cementitious materials studied by means of sorption experiments. Cem Concr Res 77:26–35 Snoeck D, Schaubroeck D, Dubruel P, De Belie N (2014) Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.50. Constr Build Mater 72:148–157 Schröfl C, Snoeck D, Mechtcherine V (2017) A review of characterisation methods for superabsorbent polymer (SAP) samples to be used in cement-based construction materials: report of the RILEM TC 260-RSC. Mater Struct 50:197. https://doi.org/10.1617/s11527-017-1060-4 Mechtcherine V, Snoeck D, Schröfl C, De Belie N, Klemm AJ, Ichimiya K, Moon J, Wyrzykowski M, Lura P, Toropovs N, Assmann A, Ichi Igarashi S, De La Varga I, Almeida FCR, Erk K, Ribeiro AB, Custódio J, Reinhardt HW, Falikman V (2018) Testing superabsorbent polymer (SAP) sorption properties prior to implementation in concrete: results of a RILEM Round-Robin Test. Mater Struct Constr 51. https://doi.org/10.1617/s11527-018-1149-4 Kamali M, Ghahremaninezhad A (2017) An investigation into the influence of superabsorbent polymers on the properties of glass powder modified cement pastes. Constr Build Mater 149:236–247 Esteves LP (2015) Recommended method for measurement of absorbency of superabsorbent polymers in cement-based materials. Mater Struct Constr 48:2397–2401. https://doi.org/10.1617/s11527-014-0324-5 Assmann A (2013) Physical properties of concrete modified with superabsorbent polymers, University of Stuttgart Zhao S, Jensen OM, Hasholt MT (2020) Measuring absorption of superabsorbent polymers in cementitious environments. Mater Struct Constr 53:1–16. https://doi.org/10.1617/s11527-020-1442-x Zhao S, Jensen OM, Hasholt MT, Guan X (2021) Absorption capacity of superabsorbent polymer in cement pastes: a robustness test. Mater Struct Constr 54:1–15. https://doi.org/10.1617/s11527-021-01636-7 Justs J, Wyrzykowski M, Bajare D, Lura P (2015) Internal curing by superabsorbent polymers in ultra-high performance concrete. Cem Concr Res 76:82–90. https://doi.org/10.1016/j.cemconres.2015.05.005 Lin DC, Dimitriadis EK, Horkay F (2007) Robust strategies for automated AFM force curve analysis-II: adhesion-influenced indentation of soft, elastic materials. J Biomech Eng 129:904–912. https://doi.org/10.1115/1.2800826 Farzanian K, Ghahremaninezhad A (2018) Desorption of superabsorbent hydrogels with varied chemical compositions in cementitious materials. Mater Struct Constr 51. https://doi.org/10.1617/s11527-017-1128-1 Tunstall LE, Scherer GW, Prud’homme RK (2017) Studying AEA interaction in cement systems using tensiometry. Cem Concr Res 92:29–36. https://doi.org/10.1016/j.cemconres.2016.11.005 Jain JA, Neithalath N (2010) Chloride transport in fly ash and glass powder modified concretes—influence of test methods on microstructure. Cem Concr Compos 32:148–156. https://doi.org/10.1016/j.cemconcomp.2009.11.010 Neithalath N, Weiss J, Olek J (2006) Characterizing Enhanced Porosity concrete using electrical impedance to predict acoustic and hydraulic performance. Cem Concr Res 36:2074–2085. https://doi.org/10.1016/j.cemconres.2006.09.001 Chavda HV, Patel RD, Modhia IP, Patel CN (2012) Preparation and characterization of superporous hydrogel based on different polymers. Int J Pharm Investig 2:134 Mignon A, Snoeck D, Schaubroeck D, Luickx N, Dubruel P, Van Vlierberghe S, De Belie N (2015) pH-responsive superabsorbent polymers: a pathway to self-healing of mortar. React Funct Polym 93:68–76. https://doi.org/10.1016/j.reactfunctpolym.2015.06.003 Xia M-S, Yao Z-T, Ge L-Q, Chen T, Li H-Y (2014) A potential bio-filler: The substitution effect of furfural modified clam shell for carbonate calcium in polypropylene. J Compos Mater 49:807–816. https://doi.org/10.1177/0021998314525981 Fernández-Carrasco L, Torrens-Martín D, Morales LM, Sagrario Martínez-Ramírez (2012) Infrared spectroscopy in the analysis of building and construction materials. Infrared Spectrosc—Mater Sci Eng Technol Technol 370:369–382. https://doi.org/10.5772/36186 Chu DH, Vinoba M, Bhagiyalakshmi M, Baek IH, Nam SC, Yoon Y, Kim SH, Jeong SK (2013) CO2 mineralization into different polymorphs of CaCO3 using an aqueous-CO2 system. RSC Adv 3:21722–21729. https://doi.org/10.1039/C3RA44007A Farzanian K, Wehbe Y, Ghahremaninezhad A (2016) The effect of superabsorbent polymers (sap) on the performance of cementitious materials. In: 4th Int. Conf. Sustain. Constr. Mater. Technol Louf J, Lu NB, Connell MGO, Cho HJ, Datta SS (2021) Under pressure: Hydrogel swelling in a granular medium 1–11 Yoon J, Cai S, Suo Z, Hayward RC (2010) Poroelastic swelling kinetics of thin hydrogel layers: comparison of theory and experiment. Soft Matter 6:6004. https://doi.org/10.1039/c0sm00434k Marcombe R, Cai S, Hong W, Zhao X, Lapusta Y, Suo Z (2010) A theory of constrained swelling of a pH-sensitive hydrogel. Soft Matter 6:784. https://doi.org/10.1039/b917211d Farzanian K, Ghahremaninezhad A (2017) The effect of the capillary forces on the desorption of hydrogels in contact with porous cementitious material. Mater Struct 50:216. https://doi.org/10.1617/s11527-017-1068-9 Sant G, Lothenbach B, Juilland P, Le Saout G, Weiss J, Scrivener K (2011) The origin of early age expansions induced in cementitious materials containing shrinkage reducing admixtures. Cem Concr Res 41:218–229. https://doi.org/10.1016/j.cemconres.2010.12.004 Farzanian K, Vafaei B, Ghahremaninezhad A (2019) The behavior of superabsorbent polymers (SAPs) in cement mixtures with glass powders as supplementary cementitious materials. Materials (Basel) 12. https://doi.org/10.3390/ma12213597 Tobón JI, Payá JJ, Borrachero MV, Restrepo OJ (2012) Mineralogical evolution of Portland cement blended with silica nanoparticles and its effect on mechanical strength. Constr Build Mater 36:736–742 Senff L, Labrincha JA, Ferreira VM, Hotza D, Repette WL (2009) Effect of nano-silica on rheology and fresh properties of cement pastes and mortars. Constr Build Mater 23:2487–2491. https://doi.org/10.1016/j.conbuildmat.2009.02.005 Esteves LP (2011) On the hydration of water-entrained cement–silica systems: Combined SEM, XRD and thermal analysis in cement pastes. Thermochim Acta 518:27–35 Wu L, Zhang Z, Yang M, Yuan J, Li P, Men X (2020) Graphene enhanced and in situ-formed alginate hydrogels for reducing friction and wear of polymers. Colloids Surfaces A Physicochem Eng Asp. https://doi.org/10.1016/j.colsurfa.2020.124434 Ashraf M, Khan AN, Ali Q, Mirza J, Goyal A, Anwar AM (2009) Physico-chemical, morphological and thermal analysis for the combined pozzolanic activities of minerals additives. Constr Build Mater 23:2207–2213 Jain J, Neithalath N (2011) Electrical impedance analysis based quantification of microstructural changes in concretes due to non-steady state chloride migration. Mater Chem Phys 129:569–579. https://doi.org/10.1016/j.matchemphys.2011.04.057 Bu Y, Weiss J (2014) The influence of alkali content on the electrical resistivity and transport properties of cementitious materials. Cem Concr Compos 51:49–58. https://doi.org/10.1016/j.cemconcomp.2014.02.008 Rajabipour F, Sant G, Weiss J (2007) Development of electrical conductivity-based sensors for health monitoring of concrete materials. In: TRB Annu. Conf., 2007: p 16. Neithalath N, Weiss J, Olek J (2006) Predicting the permeability of pervious concrete (enhanced porosity concrete) from non-destructive electrical measurements, 2006, Purdue University, rmcfoundation.org